共查询到20条相似文献,搜索用时 78 毫秒
1.
讨论了采掘工作面粉尘的构成和各因素对工作面粉尘生成的影响,介绍了各种粉尘防治技术及其效果,并提出了形成工作面粉尘的主要根源一一一截割粉尘及其影响因素,为开创粉尘防治的新思路、从根本上降低工作面的粉尘奠定了思想基础。 相似文献
2.
讨论了采掘工作面粉尘的构成和各因素对工作面粉尘生成的影响,介绍了各种粉尘防治技术及其效果,并提出了形成工作面粉尘的主要根源——截割粉尘及其影响因素,为开创粉尘防治的新思路、从根本上降低工作面的粉尘奠定了思想基础。 相似文献
3.
本文主要以采掘工作面粉尘的构成和各因素对工作面粉尘生成的影响为主题,详细阐述了各种粉尘防治技术及其效果,并提出了形成工作面粉尘的主要根源——截割粉尘及其影响因素,为开创粉尘防治的新思路、从根本上降低工作面的粉尘奠定了思想基础。 相似文献
4.
科学技术的发展,推动了我国煤矿采掘工作面粉尘技术的发展,很多的高新技术应用到了煤矿粉尘的防治过程中,大大提高了粉尘防治的水平。本文先是对煤矿采掘工作面粉尘防治技术的现状进行了概述,又详细分析阐述了我国煤矿采掘工作面粉尘防治技术的发展趋势。 相似文献
5.
粉尘是广泛存在于生产过程中,且严重危害人们身心健康的有害物质,如何快速、高效处理粉尘,减少污染,是广大科技人员追求和研究的课题。在室内粉尘治理的探讨和研究中,将合粉尘的空气用集气罩集中收集、风道中喷水雾化、泥浆入池、超细雾珠纱网拦截等措施,达到了对粉尘的有效治理。该方法安装简单,投资节省,是室内粉尘污染区和地质类实验室制样车间内粉尘治理的一个好方法。 相似文献
6.
随着采煤机械化程度的不断提高,井下生产的粉尘也越来越高,井下高浓度的粉尘对煤矿安全生产各作业的人员身体健康的危害越来愈大,本文r首先阐述了粉尘的危害,重点论述煤矿粉尘的防治技术。 相似文献
7.
8.
9.
为了降低采、掘工作面粉尘浓度、避免粉尘爆炸等事故发生,文章结合流体动力学等相关理论,提出了风水联动自动喷雾降尘理论与技术。通过工业性试验,测定了风水联动自动喷雾装置的实际效果,为煤矿粉尘防治工作提供了新的思路和方法,取得了良好的效果。 相似文献
10.
11.
12.
Christof Lanzerstorfer 《Particulate Science and Technology》2013,31(3):366-372
ABSTRACTDust samples from blast furnace dust catchers and cast house dedusting systems were investigated with respect to flowability-relevant parameters. The mass median diameter of the dusts was in the range of 140 to 210 µm for the dust catcher dusts and approximately 6 µm for the cast house dusts. Generally, the flowability of the dust catcher dusts was better compared to the flowability of the cast house dusts. The flowability categories suggested by the three flowability indicators—the angle of repose, Hausner ratio, and Carr’s compressibility—were good for the coarser dusts, while for the finer dusts the flowability was overestimated. For the blast furnace dusts, from the dust catcher a considerable variation in the bulk density was found, which can presumably be attributed to the remarkable difference in the carbon content of the dusts investigated. 相似文献
13.
14.
通过对尘粒起动风速与尘粒粒径之间关系的研究,认为可以通过加速粉尘颗粒凝聚,从而生成大尘粒的办法来减少爆破拆除中的扬尘.通过对尘粒间物理凝聚力的大小及其生成条件的研究,发现在干燥情况下促使尘粒凝聚的主导作用力是范德华力;在湿润条件下促使尘粒凝聚的主导作用力是液体桥联力,并且液体桥联力比范德华力要大得多.因而认为用物理方法创造液体桥联力发挥作用的条件,生成大而牢固的尘粒,减少爆破拆除中的扬尘是合适的.通过对尘粒间化学作用力的研究,认为用化学方法增大尘粒间的凝聚力,减少爆破拆除中的扬尘是可行的和重要的.用现场实践数据支持了上述结论. 相似文献
15.
郝海洋 《制冷与空调(四川)》2004,18(2):43-45
石灰石卸料斗除尘系统,是一套完整的粉尘治理系统.本文介绍了该系统的设计方案,重点介绍了石灰石粉尘特性、除尘风量的计算方法以及除尘系统构成,并对粉尘收集处理设备的选用做了初步探讨. 相似文献
16.
17.
为了探明煤粉在密闭空间中的爆炸特性参数,利用20 L球形爆炸装置进行实验测试,实验研究了不同点火能量对煤粉爆炸行为的影响,对比CaCO_3和Al(OH)_3两种惰性介质的抑爆效果及惰性介质的抑爆效力随点火能量的变化规律进行了重点探讨。结果表明:随着点火能量的增加,爆炸压力随着煤粉浓度的增加呈现先上升后下降的趋势,在同一浓度下,粉尘最大爆炸压力和最大升压速率呈线性上升,在高浓度下,粉尘爆炸压力受点火能量的影响更显著;添加CaCO_3和Al(OH)_3能够降低煤粉的爆炸压力,相对于CaCO_3的物理抑爆而言,Al(OH)_3的物理-化学抑爆效果更佳;惰性介质抑爆效力随点火能量增加而下降,建议采用5~10 k J点火能量考察惰性介质对煤粉爆炸的抑制效力。 相似文献
18.
煤尘爆炸是矿井安全开采的主要危险源之一。以褐煤煤尘为研究对象,探究煤尘粒径对煤尘火焰传播过程的影响。用高速摄影装置记录火焰的传播过程,进而分析不同粒径下煤尘爆炸火焰传播的高度和速度。为进一步分析煤尘燃烧过程中的化学反应机理,借助反应分子动力学方法对煤分子燃烧中的初始热分解过程进行了模拟。研究结果表明:爆炸火焰传播高度呈先增加、后稳定的趋势,传播速度呈先增大、后减小的趋势;随着煤尘粒径的减小,火焰传播高度和传播速度均呈增大的趋势;当煤尘粒径为10.5 μm时,火焰传播高度和传播速度的峰值分别为623 mm和4.3 m/s;煤尘热分解主要产物为H2、H2O、CO2和CH2O,这些产物进一步与氧气的结合会促进煤尘燃烧和火焰传播过程,使得整个体系燃速加快。为煤尘热分解和燃烧提供了较为充分的数据基础。 相似文献
19.
《Advanced Powder Technology》2022,33(3):103516
Metal dust has explosion risk in wet dust removal system. In this study, a gas–liquid dual phase explosion hydrogen inhibition method (EHIM) is proposed. The inhibitory effect of KH2PO4 on Al dust explosion in a dust removal pipe (gas phase) and Al dust hydrogen generation in a wet dust collector (liquid) is discussed separately and collectively. Adding 70% KH2PO4 totally inhibits the formation of Al dust explosion flames while inhibiting Al–water reaction in the wet dust collector at the same time. Inside the dust removal pipe, KH2PO4 acts in the initial stage of Al dust combustion and works as a pyrolysis endothermic coolant under 220℃–380℃; inside the aqueous solution of the dust collector, it generates AlPO4 with water and creates a film over the surface of the Al particles, which isolates water from Al, thus blocking Al–water reaction. Our new method offers a novel way of protecting the safety of wet dust removal systems. 相似文献
20.
Young-Kwon Park 《Particulate Science and Technology》2013,31(3):267-286
A new wind-blown dust emission module has been fabricated to be used in investigating the development and transport of Asian dust storms. A number of different dust emission models currently used worldwide were critically compared to collect the state-of-the-art schemes for each parameterization step of the wind erosion process. Thorough assessment of the dust models were conducted with an aid of literature review to judge the advantages and drawbacks of each model. The threshold friction velocity for smooth dry surface, the drag partitioning effect by non-erodible surface roughness elements, the soil moisture effect, the positive feedback of the saltating soil particles to the friction velocity, the saltation scheme calculating the horizontal soil flux, and the sandblasting scheme calculating the vertical dust emission flux were considered. A new wind-blown dust emission model was developed using the best components determined based on the analyses of this study. The predictions of the size-resolved wind-blown dust emission by different models were compared for the first time with a field measurement available in the literature. The new model developed in this study showed a reasonably good agreement with the measurement (agreement index of 0.91). 相似文献