首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 703 毫秒
1.
一种视频运动目标的检测与识别方法   总被引:1,自引:0,他引:1  
给出连续图像帧差分和二次帧差分改进的图像HSI差分模型,采用自适应分割算法能在任意条件下自动提取运动目标区域.定义运动目标的特征分析和计算,通过特征匹配判断,识别所需识别目标的区域.实验结果表明该方法是有效的,且有良好的鲁棒性.  相似文献   

2.
基于帧间差分的自适应运动目标检测方法*   总被引:6,自引:1,他引:5  
本文提出了一种基于帧间差分的自适应运动目标检测算法。算法利用直方图统计各像素点处最大概率灰度的方法提取出连续视频的背景图像;相邻帧利用帧差法得到运动区域图像;利用运动区域图像与背景图像差分的方法提取出运动目标。实验结果表明,该算法能在多个不确定性因素的序列视频中较好的提取背景图像,能及时响应实际场景变化,提高运动目标检测的质量。  相似文献   

3.
针对运动目标检测易受背景影响及帧间差分易产生空洞的问题, 提出了一种基于分块的改进三帧差分和背景差分相结合的运动目标检测算法. 该算法利用边缘检测法和均值法建立初始背景模型, 将视频图像划分成多个子块, 对利用改进的三帧差分和背景差分获取的图像的各个子块进行自适应阈值检测, 获取图像中的运动前景目标, 背景图像采取自适应更新方法. 实验结果表明, 该算法能完整的提取运动目标, 背景适应性强, 具有较高的准确性和效率.  相似文献   

4.
黄绿娥  李平康  杜秀霞 《计算机工程》2009,35(9):201-203,207
针对人体运动目标的自动实时跟踪,设计一种新的基于P89v51内核的运动摄像头云台控制系统.对人体运动的图像检测与跟踪,提出一种快速的模板匹配方法.用改进Surendra算法自适应地获取背景图像以提取匹配模板,通过摄像头运动前后帧相同的运动区域来缩小匹配区域,进行快速目标匹配,达到实时性要求.该系统已应用在视频教学及会议中,实现自动人体运动目标跟踪与摄像.  相似文献   

5.
本文对自主机器人的运动目标检测和跟踪中的一些关键技术进行了研究,通过传统的帧间差分的改进,引入HSI差值模型、图像序列的连续差分图像运算、自适应分割算法、自适应阴影部分分割算法.实验结果表明该算法有效.  相似文献   

6.
为提高运动目标检测算法的准确性,保证较低的时间复杂度,提出基于自适应混合高斯的改进三帧差分算法.为获取目标内部运动点,采用基于自适应学习率的混合高斯背景建模,以像素点间的匹配次数作为参考量来修正模型的学习速率,提高算法对动态环境的适应性,通过基于边缘提取的三帧差分改进算法对视频图像的目标轮廓进行提取,保证目标信息的完整.实验结果表明,所提算法能够完整提取运动目标,保证目标轮廓的完整,算法的时间复杂度有效降低.  相似文献   

7.
针对传统运动目标检测与跟踪算法计算量大、检测速度慢、鲁棒性差的问题,提出了一种通过动态调整检测区域以实现高效运动目标检测与跟踪的方法。利用改进的帧间差分算法提取运动目标,将目标大小和位置信息分别传给区域裁剪算法和卡尔曼滤波跟踪算法,实现检测范围的缩小和目标跟踪。采用改进后的方法对分辨率为640×480的图像进行实验,检测到目标的大小为66×84,调整后的检测区域大小为132×168,帧间差分检测部分计算量减小了约92.78%,并且根据目标位置进行跟踪的效果较好,在FPGA中验证了此方法的正确性。  相似文献   

8.
陈玲  李洁 《计算机仿真》2020,(4):347-351
现阶段所采用的跟踪方法对后继帧视频图像目标跟踪存在跟踪效果不理想、跟踪效率较低等问题。提出基于视觉传达的后继帧视频图像目标跟踪方法。利用图像差分方法获取视频图像运动目标可能出现的区域,并对这个区域视频图像目标进行运动估计,采用形态学方法来降低聚类区域的数量,得到后继帧视频图像目标区域;采用均值漂移法估计后继帧视图像核概率密度,对后继帧视频图像进行分割处理,找出后继帧视频图像目标区域最显著的特征,通过迭代运算找到目标位置,实现目标跟踪。实验结果表明,所提算法具有较好的后继帧视频图像跟踪效果、并且跟踪效率较高,具有一定的应用价值。  相似文献   

9.
基于五帧差分和背景差分的运动目标检测算法   总被引:3,自引:0,他引:3       下载免费PDF全文
静态背景下运动目标检测的抗噪性能较差。为此,提出一种改进的运动目标检测算法。对原始图像进行预处理,将五帧差分和背景差分相结合,利用基于自适应背景模型的动态阈值,提取图像中的运动区域,并进行形态学滤波和连通性检测,最终获取运动前景目标。实验结果表明,该算法能完整提取运动目标,背景适应性强,实时性好。  相似文献   

10.
针对核相关滤波目标跟踪算法中对局部上下文区域图像提取的HOG特征图在复杂环境下不能保证目标跟踪的精度问题,提出了一种核相关滤波与孪生网络相结合的目标跟踪算法.首先在首帧输入图像中提取HOG特征图并建立相关滤波器模板,同时提取经过孪生网络的目标区域图像特征图;然后若后续帧输入图像帧数不为5的倍数则提取仿射变换HOG特征图,否则提取经过孪生网络的搜索区域图像特征图;最后根据遮挡处理的结果自适应获取目标位置并更新模型和最终相关滤波器模板.仿真实验结果表明本文算法在保证目标跟踪精度的前提下具有满足实时跟踪要求的跟踪速率.  相似文献   

11.
12.
13.
The paper presents a general approach to the evaluation of the complexity of classes of algorithms, so-called pVCD-method. To develop this method, all the examined families of models of empiric generalization were restricted to classes implementable on computers and, wider, by examining their partially recursive representations. Within the framework of the algorithmic approach, the concept of Kolmogorov’ complexity of algorithms for the recognition of properties or the extraction of regularities is proposed. The method proposed to evaluate the nonrandomness of the extraction of empirical regularities is based on this concept.  相似文献   

14.
Computer-aided analysis of autoradiographic films of DNA fragments is presented. The Powell least-squares procedure is used for optimization of parameters for components of complex densitometric curves. Since each densitometric spectrum may be divided for several non-overlapped blocks of bands, there is no upper limit on the number of parameters which must be optimized. Eight shapes for the component bands are utilized: symmetric and asymmetric Gauss and Cauchy functions, direct, symmetric and asymmetric product of Gauss function and inverse of Cauchy function, and log-normal function. The probability of DNA cleavage is calculated with correction for multiple cuts. The methods presented was applied to detailed analysis of densitometric spectra of a 21-bp DNA restriction fragment and allowed for direct correlation between structural microheterogeneity of DNA and the resulting cutting pattern. This method should facilitate the analysis of densitometric data from antibiotic-induced cleavage of DNA and footprinting experiments.  相似文献   

15.
16.
联合收割机脱粒滚筒恒速智能控制器设计   总被引:2,自引:0,他引:2  
研究了轴流式联合收割机的控制问题,给出了联合收割机脱粒滚筒的数学模型,介绍了基于模式识别的智能控制原理,建立了联合收割机脱粒滚筒恒速控制模型,设计了基于模式识别的智能恒速控制器.应用Matlab/Simulink进行了控制器仿真,其结果表明,将基于模式识别的智能控制应用于联合收割机脱粒滚筒的恒速控制,其过渡过程平稳、响应速度快、无超调、无振荡并且无稳态误差.  相似文献   

17.
In this paper, we study the semicycles of oscillatory solutions of the delay difference equation yn+1yn + pnyn-k = 0, where pn is a sequence of nonnegative real numbers and k is a positive integer. Upper bound of numbers of terms of semicycles are determined in the case when
Our results improve and complement known results in literature.  相似文献   

18.
The problem to find a 4-edge-coloring of a 3-regular graph is solvable in polynomial time but an analogous problem for 3-edge-coloring is NP-hard. To make the gap more precise, we study complexity of approximation algorithms for invariants measuring how far is a 3-regular graph from having a 3-edge-coloring. We show that it is an NP-hard problem to approximate such invariants with an error O(n1−ε), where n denotes the order of the graph and 0<ε<1 is a constant.  相似文献   

19.
In spite of being a classical method for solving differential equations, the method of variation of parameters continues having a great interest in theoretical and practical applications, as in astrodynamics. In this paper we analyse this method providing some modifications and generalised theoretical results. Finally, we present an application to the determination of the ephemeris of an artificial satellite, showing the benefits of the method of variation of parameters for this kind of problems.  相似文献   

20.
讨论了几种实用的计算机辅助课表编排技术及在实际编排中的应用。应用分析表明,采用分批与或图搜索和分批优化的匈牙利算法相结合的方法,在计算机辅助课表编排中是行之有效的。  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号