Augmented gradient flows for on-line robust pole assignment via state and output feedback

This paper is concerned with robust pole assignment in synthesis of linear control systems via state and output feedbacks. First, both the pole assignment and robustness requirements are appropriately formulated as two optimization problems. Then, gradient flow models are developed for the on-line computation of feedback gain matrices that result in robust pole assignment by solving these two optimization problems. A technique is introduced to facilitate the real-time matrix inverse involved for realizing the gradient flow models. The resulting augmented gradient flows have desired convergence properties. Simulation results are included to show the effectiveness of the proposed approach.     

A note on pole assignment in uncertain systems

A new method for full-rank state-feedback pole assignment is introduced. A particular advantage of this method is that no freedom in the design parameters is lost. Hence, further design problems such as robust pole assignment in uncertain systems are alleviated. An application of this feature is shown for a particular linear model of the F16 aircraft. The connections between state feedback and several concepts in the literature such as incomplete input feedback, incomplete state feedback, output feedback and incomplete pole assignment are also given.     

Least squares pole assignment by memoryless output feedback

In this paper, a pole assignment problem for a linear time-invariant control system by memoryless output feedback is posed as a least squares optimisation problem and analysed. The cost functions are appropriately modified so as to obtain convergence of the corresponding gradient flow and existence of the global minimum. This approach is also extended to accommodate the output pole assignment problem with insensitivity against disturbances in system parameters. The relation between the modified cost functions and the original pole assignment problem is revealed. The proposed approach is compared with other existing approaches and illustrated by numerical results.     

线性离散周期系统输出反馈参数化极点配置

采用周期输出反馈的途径, 考虑了线性离散时间周期系统的极点配置问题. 通过将闭环单值性矩阵进行一系列转化, 周期输出反馈律的求解问题可以转化为一类Sylvester矩阵方程的求解问题. 利用Sylvester矩阵方程的最新结果, 可以将输出反馈增益表示为参数化形式, 从而得到了能够实现极点配置的所有输出反馈控制器. 数值算例验证了方法的有效性.     

基于快速输出采样反馈的网络控制系统滑模控制

针对网络控制系统的网络诱导时延问题,提出了一种新的滑模控制方法。通过快速采样被控对象输出,建立了具有线性时不变被控对象的网络控制系统的离散模型。在此基础上,用极点配置法给出了滑模切换面参数,设计了输出反馈离散滑模控制器。仿真结果验证了该控制方法的有效性。     

用输出反馈配置鲁棒极点*

本文讨论了线性定常多变量系统在时域上用输出反馈配置鲁棒极点的问题。用输出反馈配置极点时,有一些自由度,可以利用这些自由度指定特征向量。本文给出一种数值方法,它用于选择一组尽可能正交的特征向量,使闭环系统矩阵A+BKC尽可能接近正规,从而使闭环极点对于矩阵的系数变化是鲁棒的。     

高超声速飞行器非线性鲁棒控制律设计

高超声速飞行器具有模型非线性程度高、耦合程度强、参数不确定性大、抗干扰能力弱等特点,其自主控制具有较大的挑战.论文提出了一种基于鲁棒补偿技术和反馈线性化方法的非线性鲁棒控制方法.文中首先采用反馈线性化的方法对纵向模型进行输入输出线性化,实现速度和高度通道的解耦和非线性模型的线性化.针对得到的线性模型,设计包括标称控制器和鲁棒补偿器的线性控制器.基于极点配置原理,设计标称控制器使标称线性系统具有期望的输入输出特性,利用鲁棒补偿器来抑制参数不确定性和外界扰动对于闭环控制系统的影响.基于小增益定理,证明了闭环控制系统的鲁棒稳定性和鲁棒跟踪性能.相比于非线性回路成形控制方法,仿真结果表明了所设计非线性鲁棒控制算法的有效性和优越性.     

Sliding mode stabilization of uncertain systems using only output information

A practical procedure is presented for synthesizing output feedback controllers for uncertain systems based on sliding mode concepts. The class of systems to which the results apply is identified and includes the requirement that the nominal linear system is minimum phase. The procedure proposed for the design of the sliding surface uses established output feedback eigenvalue assignment results. It will be shown that all the assumptions imposed on the system pertain to the design of the sliding surface. The proposed controller, which guarantees attainment of a sliding mode despite the presence of uncertainty requires no additional assumptions.     

线性离散系统具有闭环极点约束的输出反馈H∞ 控制

对一类线性离散系统, 研究了具有闭环圆盘极点约束的输出反馈H_∞ 控制问题. 基于线性矩阵不等式处理方法, 导出了输出反馈控制器的存在条件和设计方法. 和现有方法相比, 本文的方法具有更小的保守性.     

鲁棒极点配置的优化算法

本文研究了一类线性多变量系统的鲁棒极点配置问题，提出了一种基于目标函数优化的鲁棒极点配置算法，解决问题的基本思想是，利用极点配置的参数化表示结果，以系统输出的Ｌ∞范数作为极点配置寻优的准则函数，在这个准则下，通过解优化问题的途径确定极点配置问题中的自由参数，从而达到鲁棒极点配置的目的。     

Output feedback model predictive control for LPV systems based on quasi-min–max algorithm

This paper proposes a robust output feedback model predictive control (MPC) scheme for linear parameter varying (LPV) systems based on a quasi-min–max algorithm. This approach involves an off-line design of a robust state observer for LPV systems using linear matrix inequality (LMI) and an on-line robust output feedback MPC algorithm using the estimated state. The proposed MPC method for LPV systems is applicable for a variety of systems with constraints and guarantees the robust stability of the output feedback systems. A numerical example for an LPV system subject to input constraints is given to demonstrate its effectiveness.     

一类不确定切换系统的容错控制与极点配置

分析一类非线性不确定切换系统的容错控制与基于状态反馈的极点配置。系统包含有界未知结构的不确定性和未知非线性项。在各子系统不稳定的前提下,设计切换系统的状态反馈控制器,基于Lyapunov稳定性理论和LMI方法,保证在任意切换下不确定系统在传感器和执行器同时失效情况下具有鲁棒容错控制性能的充分条件。在此基础上研究该系统的极点配置在左半复平面选定圆域内以理想速度渐近衰减。文中得到了容错控制切换系统可状态反馈镇定的充分条件,然后用易于求解的线性矩阵不等式形式给出结果,最后通过仿真验证所设计的切换系统的极点配置在圆域内,在状态反馈控制器下渐近稳定。     

具有方差和极点约束的不确定系统鲁棒H∞输出反馈控制

针对一类具有范数有界不确定性的连续系统和二次矩阵不等式区域,考虑系统具有方差和区域极点约束的输出反馈控制器设计问题．为此首先导出闭环系统区域稳定的充分必要条件．然后用线性矩阵不等式方法给出输出反馈控制器存在的一个充分条件．在此充分条件下闭环系统是鲁棒区域稳定的且具有H∞性能以及当干扰为白噪声信号时其稳态状态方差有限．接下来用矩阵分解方法给出输出反馈控制器增益矩阵的求解过程．最后通过一个仿真实例说明本文所提出的控制器设计方法的有效性．     

Insensitive and robust control design via output feedback eigenstructure assignment

Insensitive and robust control design using output‐feedback eigenstructure assignment for linear multivariable systems is considered in this paper. A parametric expression of closed‐loop eigenvectors and generalized eigenvectors is developed. It can cope with the case where the closed‐loop eigenvalues are multiple and/or the same as the open‐loop ones so that the system to be designed can be uncontrollable and/or unobservable. The controller designed via output‐feedback eigenstructure assignment is expressed by proposed parameter vectors. The freedom provided by output‐feedback eigenstructure assignment is used to optimize some performance functions which are used to measure the sensitivity of the closed‐loop matrix and the robustness of the closed‐loop system. Copyright © 2000 John Wiley & Sons, Ltd.     

具有方差和极点约束的不确定系统鲁棒H∞输出反馈控制

针对一类具有范数有界不确定性的连续系统和二次矩阵不等式区域, 考虑系统具有方差和区域极点约束 的输出反馈控制器设计问题. 为此首先导出闭环系统区域稳定的充分必要条件. 然后用线性矩阵不等式方法给出输出反馈控制器存在的一个充分条件. 在此充分条件下闭环系统是鲁棒区域稳定的且具有H-infinity性能以及当干扰为白噪声信号时其稳态状态方差有限. 接下来用矩阵分解方法给出输出反馈控制器增益矩阵的求解过程. 最后通过一个仿真实例说明本文所提出的控制器设计方法的有效性.     

用输出反馈配置鲁棒极点的李雅普诺夫直接法*

本文讨论了输出反馈配置线性多变量定常系统鲁棒极点的问题,提出了一种设计方法和有关定理,并用实例说明了该法的应用。     

Pole assignment using dynamic output feedback compensators

The design of dynamic output feedback compensators for the pole assignment of linear time-invariant multivariable systems is considered. A systematic procedure is developed for the synthesis of the transfer function matrix of the compensator. A certain number of poles can be arbitrarily assigned by the proposed compensator. Moreover, in order to assign more poles using a compensator of the same order as before, a new approximate assignment approach based on the least-square-error algorithm is proposed. A numerical example is given to demonstrate the effectiveness of the proposed approaches.     

基于极点与输出方差约束相容性分析的状态反馈

研究一类线性随机系统的满意状态反馈,期望闭环系统同时满足给定的圆形极点与输出方差约束,先分析这两类约束指标的相容性,利用线性矩阵不等式（LMI）方法,给出与极点指标相容的输出方差上界（或下界）指标的较好取值范围,然后,对具有相容极点与输出方差指标的控制问题,给出设计理论,特别对输出方差指标是区间的情形提出一种控制设计方法,算例对所得结果及所提设计方法作了说明。     

Pole assignment for linear time-invariant systems by periodic memoryless output feedback

It is well known that the poles of a linear time-invariant controllable and observable system can be assigned arbitrarily by state feedback. When only the output is available, pole assignment is still possible by means of dynamic output feedback. In this paper the potential of time-varying memoryless output feedback is considered. It is shown that, up to some technical conditions, it is indeed possible to allocate the poles of a linear time-invariant discrete-time system by memoryless output feedback with periodic gains. The period of the gains is (n + 1) with n the order of the system. The power of the design technique is proved to be comparable to what can be achieved by the classical dynamic feedback approach.