Construction and performance analysis of 2-D codes for M-ary OFFH?CDMA systems

A new family of two-dimensional (2-D) codes constructed by combining frequency-hop and time-spreading codes is presented. The proposed codes are designed to overcome the limitation imposed on the maximum permissible number of simultaneous users in optical code-division multiple-access (OCDMA) systems. To increase the data transmission rate, the 2-D codes employ a M-ary signalling scheme. The proposed family of codes has the favourable characteristics of a zero autocorrelation constraint and a cross-correlation constraint of one. The performance of the 2-D code is analysed in terms of the bit error rate (BER) and is compared with that of a conventional OCDMA system using optical orthogonal code (OOC). The numerical and simulation results reveal that the proposed system outperforms conventional OCDMA systems both in terms of the BER and the data transmission rate. In addition, the system capacity is sufficient to ensure reliable communication (BERles10^-9) in local area networks     

Unipolar codes for optical spectral-amplitude code-division multiple-access systems based on combinatorial designs

A novel class of optical signature codes based on combinatorial designs is proposed for optical spectral-amplitude code-division multiple-access (CDMA) systems. It is applicable to both synchronous and asynchronous incoherent optical CDMA and is compatible with both frequency-encoded and time-spreading schemes. Simplicity of construction, larger code cardinality and larger flexibility in cross-correlation (CC) control make the proposed code family an interesting candidate for future optical CDMA applications that require a large number of simultaneous users. It has been shown that the system performance can be significantly improved by using the proposed codes with ideal in-phase CC in preference to Hadamard codes.     

Modified multi-wavelength optical orthogonal code for spectral efficiency improvement in two-dimensional optical CDMA system

Classical multi-wavelength optical orthogonal code (MWOOC) constructions impose several conditions on the code parameters. These limit the optical code division multiple access (OCDMA) system potentialities in terms of performance and practical implementation. A modified MWOOC construction is used to overcome these limitations. Indeed, this method permits the design of 2D codes with a low temporal code length value and a low number of wavelengths. Considering a multi-user receiver named parallel interference cancellation, the number of users and the data rate per user the system can provide for a low bit error rate value are evaluated. For a given performance, it is shown that the spectral efficiency using the modified MWOOC is significantly improved. Thus, the simplicity of the modified code design and the spectral efficiency increase constitute an advantage for practical implementation of OCDMA network.     

Wavelength-encoding/temporal-spreading optical code division multiple-access system with in-fiber chirped moiré gratings

We propose an optical code division multiple-access (OCDMA) system that uses in-fiber chirped moiré gratings (CMG's) for encoding and decoding of broadband pulses. In reflection the wavelength-selective and dispersive nature of CMG's can be used to implement wavelength-encoding/temporal-spreading OCDMA. We give examples of codes designed around the constraints imposed by the encoding devices and present numerical simulations that demonstrate the proposed concept.     

Random optical codes used in optical networks

An analysis of a simple way to design generalised optical orthogonal codes to be used in optical code-division multiple-access systems is presented. They are random optical codes (ROCs). This novel family is especially suitable for optical networks with a large number of channels, low bit rate requirements, energy limitations and packed data. For example, sensor networks need these requirements. An application in an intra-spacecraft telecommand and telemeasurement (TC/TM) optical wireless network is also described. ROCs are selected randomly from all possible rearrangements. However, its probability of error is adequate in many useful parameter ranges. Moreover, ROCs present features not found in other families of codes such as huge cardinality and parameter adaptation to the system necessities. Here, the main contribution is to present a method to optimise the values of the parameters. Furthermore, the optimal weight of the codes is found, given two out of the other set of parameters, that is, the length, the number of users and the probability of error. In addition, a comparison between the length and the power consumption of ROCs and prime codes is also developed.     

Frequency-hopping optical orthogonal codes with arbitrary time-blank patterns

We investigate a general scheme of frequency-hopping optical orthogonal codes with a specified distance between adjacent frequency symbols and propose a novel code that allows time blanks between adjacent frequency symbols in code sequences. A time blank represents the absence of frequency symbols in code sequences and makes no interference with frequency components. The insertion of time-blank patterns can provide ample scope to generate much more code sequences than the conventional codes lacking in time-blank patterns, and we show this by constructing an algorithm to generate the proposed code. The performance analysis demonstrates that its performance is superior to that of the conventional codes in terms of the bit error rate. We also derive the upper bound on the proposed code set.     

Strict optical orthogonal codes for purely asynchronous code-division multiple-access applications

Strict optical orthogonal codes are presented for purely asynchronous optical code-division multiple-access (CDMA) applications. The proposed code can strictly guarantee the peaks of its cross-correlation functions and the sidelobes of any of its autocorrelation functions to have a value of 1 in purely asynchronous data communications. The basic theory of the proposed codes is given. An experiment on optical CDMA systems is also demonstrated to verify the characteristics of the proposed code.     

OCDMA系统二维2D-OOSC方阵码的参数优化和性能分析

给出了二维λ-t光正交方阵码2D-OOSC的设计方案, 重点讨论了2D-OOSC码字的相关性及码字参数对系统性能的影响。详细分析了2D-OOSC系统的用户容量以及由多用户干扰引起的误码性能。研究表明，在占用相同带宽的条件下，系统的用户容量远大于基于1D-OOC的WDM-CDMA混合系统，特别是在传输距离不太远的局域网中，光纤色散引起的传输损失较小。基于2D-OOSC地址码的 OCDMA系统有着现实的应用价值。     

一种大容量的二维光正交码

首先构造一种扩展的立方线性同余码（ECLC）并分析了其码字性能。在此基础上，用该码作为时间扩频伪随机序列和以素数码（PC）作为跳波长伪随机序列。再构成一种新的二维光正交码ECLC/PC，然后分析了ECLC/PC码字的性能，并与EQC/PC作为比较，相比之下，两者的码长和码重都相等，前者的互相关性能略有下降。但码字容量大大增加。因此，ECLC/PC适合于接入用户数较多的OCDMA系统。     

大气光通信中Turbo码的最大后验概率译码

为了精确实现对空间物体的测量,提出了利用线激光、单CCD相机、小孔成像与激光面约束模型的激光线测量法。引进三维信息已知的标准阶梯块作为激光面约束的标定块;由计算机控制摄像头对实物连续拍摄和实时处理,提取激光线上的像素坐标;利用建立的模型将二维坐标转换成三维坐标,再以点云的形式重构出物体,实现三维自动测量。实践中检测系统测量精度可达到0.05mm。     

Design of multi-rate optical code paths considering polarisation mode dispersion limitations

The authors propose an original design based on multi-rate optical code paths (OCPs) for transport in advanced wavelength-division multiplexing/optical code division multiplexing (WDM/OCDM) networks. The authors utilise multi-length optical orthogonal codes (OOC) to obtain multi-rate OCPs. The performance of the proposed scheme is analysed and the impact of multiple access interference (MAI) and polarisation mode dispersion (PMD) over these OCPs is evaluated. Results show that not only multi-rate operation can be achieved but also MAI effects can be reduced, while mitigating PMD effects.     

具有双极性的非相干OCDMA系统性能分析

提出了一种可减少多址干扰的非相干OCDMA编解码方案，该方案利用光开关控制2个单极性编码器和1个具有平衡互补结构的解码器，在1个光学信道上实现了双极性OCDMA信号传输；分析了电光编码、传输、解码、光电转换等环节的信号变化，推导出系统的噪声和误码率公式；与其它CDMA方案比较表明本方案在误码率方面可达到电域双极性CDMA系统的水平。     

Improved BER based on intensity noise alleviation using developed detection technique for incoherent SAC-OCDMA systems

The major drawback of incoherent spectral-amplitude coding optical code-division multiple-access (SAC-OCDMA) systems is their inherent intensity noise originating due to the incoherency of the broadband light sources. In this paper, we propose a developed detection technique named the modified-AND subtraction detection for incoherent SAC-OCDMA systems. This detection technique is based upon decreasing the received signal strength during the decoding process by dividing the spectrum of the utilized code sequence. The proposed technique is capable of mitigating the intensity noise effect, as well as suppressing the multiple-access interference impact. Based on modified quadratic congruence (MQC) code, the analytical results reveal that the modified-AND detection offer best bit-error rate (BER) performance and enables MQC code to support higher transmission rate up to 1.25?Gb/s compared to conventional AND detection. Furthermore, we ascertained that the proposed technique enhances the system performance using a simulation experiment.     

Variable-length two-dimensional modulation coding for imaging page-oriented optical data storage systems

We present what is to our knowledge a new class of two-dimensional (2-D) modulation codes, called variable-length 2-D modulation codes, suitable for page-oriented optical data storage (PODS) systems that write and read data in a 2-D bit image format. These codes overcome the inherent spatial intersymbol interference in imaging PODS systems and improve the code rate performance of previous fixed-length 2-D modulation codes. The codes in this new class map one-dimensional input data blocks of variable lengths to 2-D output data blocks of variable lengths and are designed to limit error propagation. In this study we give several examples of fixed-length and variable-length 2-D modulation codes with various properties for imaging PODS systems. We also compare the bit-error-rate performance of these fixed-length and variable-length codes.     

Performance of impulse radio direct sequence ultra-wideband system with variable-length spreading sequences

An adaptive transmission scheme using variable-length spreading sequences (VLSS) is proposed. The system is based on an impulse direct sequence ultra-wideband (DS-UWB) approach for wireless communication where the number of active users is variable. In contrast to the conventional DS-UWB system, which employs a fixed length spreading code, the proposed system changes the length of spreading code according to the system load adaptively, which is proven to be able to reduce the inter-chip interference, inter-symbol interference and multiple-access interference and thus improve the system performance in terms of bit error rate. The proposed system is simulated in multipath channels with a high level of multipath fragments, modelled by the standard IEEE 802.15.3a indoor channel model 1 (CM1) and channel model 2 (CM2). Numerical results demonstrate that when RAKE receivers are employed, the proposed VLSS DS-UWB system outperforms the conventional system by appropriately allocating the spreading sequences.     

Improved regular and semi-random rate-compatible low-density parity-check codes with short block lengths

Powerful rate-compatible codes are essential for achieving high throughput in hybrid automatic repeat request (ARQ) systems for networks utilising packet data transmission. The paper focuses on the construction of efficient rate-compatible low-density parity-check (RC-LDPC) codes over a wide range of rates. Two LDPC code families are considered; namely, regular LDPC codes which are known for good performance and low error floor, and semi-random LDPC codes which offer performance similar to regular LDPC codes with the additional property of linear-time encoding. An algorithm for the design of punctured regular RC-LDPC codes that have low error floor is presented. Furthermore, systematic algorithms for the construction of semi-random RC-LDPC codes are proposed based on puncturing and extending. The performance of a type-ll hybrid ARQ system employing the proposed RC-LDPC codes is investigated. Compared with existing hybrid ARQ systems based on regular LDPC codes, the proposed ARQ system based on semi-random LDPC codes offers the advantages of linear-time encoding and higher throughput.     

一种新的二维光正交码的设计与性能分析

针对二维光码分多址(OCDMA)系统地址码,本文在单重合序列(OCS)的基础上,构造了一种新的二维光正交码EQC/OCS.该地址码是以扩展二次同余码(EQC)为时间扩频伪随机序列,以OCS或截短OCS为波长跳频伪随机序列进行构造的.与EQC/PC相比,EQC/OCS的波长数可以是任意整数,不局限于素数.EQC/OCS不仅构造灵活,而且充分利用了系统的有效波长资源.当二维OCDMA系统的有效波长数不是素数时,在相同码长和码重的情况下,EQC/OCS增加了二维OCDMA系统的码字容量,从而增加了接入用户数.另一方面,与EQC/PC相比,EQC/OCS的码字的自相关和互相关限保持不变.     

Bandwidth optimization of optical data links by use of error-control codes

A design approach to optimizing the bandwidth of optical data links while simultaneously decreasing the bit-error rate is proposed. Mathematical analysis indicates that bandwidth gains by factors of 10-60 with power gains of as much as 8.9 dB are possible. To achieve these performance levels requires several innovations. First, conventional forward error-correcting codes cannot be used because of their excessive hardware cost. A reasonably powerful multidimensional parity-based error-control code is proposed and analyzed. These codes offer excellent error detection and moderate error-correction capabilities. Most importantly, they can operate at the fast clock rates that are required. Second, a hybrid automatic-repeat-request protocol is exploited to correct complex error patterns. In thermal-noise-limited systems this unique combination allows the optical clock rate to be increased significantly, thereby resulting in large bandwidth increases. The proposed design approach can be used in optical data links in which propagation delays are moderate and is applicable to fibers that exploit wavelength-division multiplexing or time-division multiplexing, one-dimensional parallel-fiber ribbons, and two-dimensional optical data links that use free space or guided waves. Several design examples are illustrated.     

Iterative optimization for joint design of source and channel codes using genetic algorithms

Abstract

This paper presents a novel algorithm for the joint design of source and channel codes. In the algorithm, channel‐optimized vector quantization (COVQ) and rate‐punctured convolutional coding (RCPC) are used for design of the source code and the channel code, respectively. We employ the genetic algorithm (GA) to prevent the design of COVQ from falling into a poor local optimum. We also adopt the GA to reduce the computational time needed for realizing the unequal error protection scheme best matched to the COVQ. Both the GA‐based source coding and channel coding scheme are then iteratively combined to achieve a near global optimal solution for the joint design. Numerical results show that the algorithm can be an effective alternative for applications where high rate‐distortion performance and low computational complexity are desired.     

码率嵌入式高码率差分空时编码

为了提高传输码率,将具有高码率的全分集全码率(FDFR)空时码嵌入到低码率的传统差分空时编码中,提出了一种码率嵌入式的差分空时编码方法,该编码方案具有编码增益高,误码性能好等优点.仿真结果表明,与传统的差分空时编码方案(酉差分空时编码和差分空时分组编码)相比,新编码方法具有很好的误码性能,特别是在高传输码率和接收天线较多情况下,其误码性能优势越明显.