Electronic speckle pattern shearing interferometer with a photopolymer holographic grating

A photopolymer holographic grating is used to produce the two sheared images in an electronic speckle pattern shearing interferometer. A ground glass screen following the grating eliminates unwanted diffraction orders and removes the requirement for the CCD camera to resolve the diffraction grating's pitch. The sheared images on the ground glass are further imaged onto the CCD camera. The fringe pattern contrast was estimated to be above 90%. A validation of the system was done by comparing the theoretical phase difference distribution with the experimental data from the three-point bending test.     

一种新型绿敏光致聚合物及全息特性研究

报道了一种新型的对绿光敏感的光致聚合物材料,对环境湿度不敏感,材料的干燥时间短。该材料以丙烯酰胺为单体,N-苯基甘氨酸作为引发剂,藻红B作为光敏剂,并加入成膜剂聚乙烯醇及增塑剂二甲亚砜。对材料中光引发剂、光敏剂及增塑剂浓度进行了优化,发现其有一个最佳值。本材料记录的全息图衍射效率可达50％以上,感光强度为60mJ／cm^2。在光聚物介质上能够记录信噪比比较高的图像,说明该材料可用于全息存储。     

Evanescent wave holographic recording in a photopolymer

We present a study of holographic recording with an evanescent reference and a homogeneous (plane) object wave. The grating step was 324 nm. The dependence of the diffraction efficiency on exposure was investigated. The maximum value obtained was 0.01% at 5 mJ cm^?2 exposure. The optimal pre-exposure, needed for grating adhesion to the glass substrate, was 1 μJ cm^?2.     

Multilayer holographic recording using a two-color-absorption photopolymer

We developed a sensitive two-color-absorption photopolymer in which holograms are recorded by simultaneous irradiation with a 660 nm interference light and a 410 nm gate light. Doped with bis(silyl)pentathiophene as a two-color-photosensitive dye and 2,2-dimethoxy-2-phenylacetophenone as a radical photopolymerization initiator; its matrix contains low-refractive index binding polymers and high-refractive index monomers. The sensitivity and diffraction efficiency of 25 mum thick layers are from 1.2 x 10(-9) to 3.7 x 10(-9) cm2/mJ and from 1% to 4%. We made a three-photopolymer-layer waveguide structure, where each photopolymer layer and high-refractive index adhesive layer serves as a core layer and is sandwiched between two low-refractive index glass substrates that serve as clad layers. Gate light propagated through the adhesive layers, reference and object beams intersected the photopolymer layers, and different diffraction patterns could be written in each layer.     

Optical demultiplexer using a silicon concave diffraction grating

A demultiplexer composed of a concave diffraction grating and a multimode slab waveguide is attractive since it has many advantageous features. However, this type of demultiplexer has had high demultiplexing losses until now, because the concave diffraction gratings used had poor diffraction efficiency. A silicon concave diffraction grating has been developed to overcome this problem, manufactured by cylindrically bending a thin silicon plane diffraction grating. The diffraction efficiency of this grating was 82% at a blaze wavelength. The five-channel demultiplexer was assembled with this grating as well as with a multimode slab waveguide and a fiber array. Its branching loss was in the 1.4-1.8-dB range.     

Effects of surface roughness on the performance of an etched diffraction grating demultiplexer

The fabrication tolerance of surface roughness on the performance [such as the insertion loss, the polarization-dependent loss (PDL), and the chromatic dispersion] of an etched diffraction grating demultiplexer is analyzed by using an accurate method of moments. The results show that both the insertion loss and the chromatic dispersion rapidly increase as the roughness of the grating facets increases. Appropriate residual roughness of the shaded facets can reduce the PDL of the demultiplexer, and the mechanism for the existence of an optimal residual roughness is explained.     

Nonlocal-response diffusion model of holographic recording in photopolymer

The standard one-dimensional diffusion equation is extended to include nonlocal temporal and spatial medium responses. How such nonlocal effects arise in a photopolymer is discussed. It is argued that assuming rapid polymer chain growth, any nonlocal temporal response can be dealt with so that the response can be completely understood in terms of a steady-state nonlocal spatial response. The resulting nonlocal diffusion equation is then solved numerically, in low-harmonic approximation, to describe grating formation. The effects of the diffusion rate, the rate of polymerization, and a new parameter, the nonlocal response length, are examined by using the predictions of the model. By applying the two-wave coupled-wave model, assuming a linear relationship between polymerized concentration and index modulation, the resulting variation of the grating diffraction efficiency is examined.     

Application of a photopolymer to a holographic reflector for reflective liquid-crystal displays

A photopolymer for fabrication of volume-type transmission holograms, which are used primarily on the holographic reflector for reflective LCD's, is reported. This photopolymer consists of bisphenol-type epoxy resin and an acrylic monomer with diaryliodonium salt and 3-ketocoumarin as a complex initiator. The chemistry of the imaging formation is based on the radical polymerization of the monomer initiated by a holographic exposure, followed by the cationic polymerization of epoxy resin by UV exposure after postexposure baking. The yellowish color of the hologram derivatives that resulted from the sensitizing dye and from the photospeed were improved to satisfy the specifications for the holographic reflector. The holographic reflector now gives brighter images.     

Improvement of photopolymer materials for holographic data storage

Photopolymer materials are practical materials for use as holographic recording media due to the fact that they are inexpensive, self-processing materials with the ability to record low loss, highly diffraction efficient volume holographic gratings. In general these materials absorb light of an appropriate wavelength, causing photo-polymerization of the local monomer, inducing a change in the material’s refractive index. These small changes in refractive index enable the storage of large quantities of data using holographic techniques. In an attempt to further develop the data storage capacity and quality of the information stored, i.e., resolution, in such materials, a deeper understanding of the photochemical mechanisms present during the formation of holographic gratings has become ever more crucial. From this understanding the response of an acrylamide/polyvinylalcohol based photopolymer to high spatial frequency information is improved through the addition of a chain transfer agent, i.e., sodium formate, HCOONa.     

Multiplexed holographic data page storage on a polyvinyl alcohol/acrylamide photopolymer memory

Holographic data pages were multiplexed in different thickness layers of a polyvinyl alcohol/acrylamide photopolymer. This material is formed of acrylamide photopolymers, which are considered interesting materials for recording holographic memories. A liquid crystal device was used to modify the object beam and store the data pages. A peristrophic multiplexing method is used to store a large number of data pages in the same spot in the material. The bit error rate was calculated fitting the histograms of the images to determine what parameters improve the quality of the images.     

对绿光敏感的全息存储光致聚合物性能的研究

报道了一种对绿光敏感的以丙烯酰胺为单体的光致聚合物，该光聚物由单体、光引发剂、共引发剂和成膜物组成。可以得到材料的最大衍射效率为55％。将光聚物用不同温度进行烘烤加热，可以看到材料的折射率调制度会增加。使用角度复用技术在光聚物中存储10幅全息图，说明所研究材料有希望于大容量体全息存储。     

阵列波导光栅解复用器光谱响应特性分析

基于单模光波导本征模场及其端面衍射场分布的高斯近似表达,推导出两个端面非接触光波导耦合的耦合系数的函数表达式,并基于此推导出阵列波导光栅解复用器的简单光谱响应效率的函数表达式。建立了分析阵列波导光栅解复用器光谱响应特性的简洁数学模型,阐明了阵列波导光栅解复用器对通道中心频率的响应度和相邻信号通道间的串扰与基本参数的关系,为设计和分析阵列波导光栅解复用器提供了理论基础。     

Characterization of the DuPont photopolymer for three-dimensional holographic storage

DuPont's HRF-150 photopolymer film is investigated for use in three-dimensional holographic memories. Measurements of sensitivity, hologram persistence, the lateral spread of the photoinitiated reaction, and the variation of diffraction efficiency with modulation depth, spatial frequency and tilt angle, and intensity are reported. We observed that the diffraction efficiency of the HRF-150 photopolymer for a given exposure decreases with increases in intensity and grating tilt angle. The holograms were nondestructively reconstructed for long periods of time at room temperature. The photoinitiated reaction spread less than 100 μm over a period of 16 h.     

Wavefront sensor based on the Talbot effect with the precorrected holographic grating

A holographic wavefront sensor based on the Talbot effect is proposed. Optical wavefronts are measured by sampling the light amplitude distribution with a two-dimensional (2D) precorrected holographic grating. The factors that allow changing an angular measurement range and a spatial resolution of the sensor are discussed. A comparative analysis with the Shack-Hartmann sensor is illustrated with some experimental results.     

Accurate two-dimensional model of an arrayed-waveguide grating demultiplexer and optimal design based on the reciprocity theory

An accurate two-dimensional (2D) model is introduced for the simulation of an arrayed-waveguide grating (AWG) demultiplexer by integrating the field distribution along the vertical direction. The equivalent 2D model has almost the same accuracy as the original three-dimensional model and is more accurate for the AWG considered here than the conventional 2D model based on the effective-index method. To further improve the computational efficiency, the reciprocity theory is applied to the optimal design of a flat-top AWG demultiplexer with a special input structure.     

Holographic characteristics of a 1-mm-thick photopolymer to be used in holographic memories

Poly(vinyl alcohol-acrylamide) photopolymers are materials of interest in the field of digital information storage (holographic memories). We analyzed the behavior of a 1-mm-thick photopolymer. Using a standard holographic setup, we recorded unslanted diffraction gratings. The material has high angular selectivity (0.4 degrees), good sensitivity (88 mJ/cm2), and small losses caused by absorption and scattering of light. It also has a high maximum diffraction efficiency (70%). A significant induction period was seen in the material. The authors hypothesize that, during most of this induction period, polymerization does in fact take place but is not reflected in the appearance of the diffracted light until a certain threshold value of exposure is reached.     

Optical response of photopolymer materials for holographic data storage applications

We briefly review the application of photopolymer recording materials in the area of holographic data storage. In particular we discuss the recent development of the Non-local Polymerisation Driven Diffusion model. Applying this model we develop simple first-order analytic expressions describing the spatial frequency response of photopolymer materials. The assumptions made in the derivation of these formulae are described and their ranges of validity are examined. The effects of particular physical parameters of a photopolymer on the material response are discussed.     

Study on holographic characteristics of a novel single dye-sensitised photopolymer using blue and green lights

A novel Fuchsin Basic-sensitised photopolymer was prepared and studied as a holographic recording material using He–Cd and Nd:YAG lasers. The results indicate that the material shows attractive recording characteristics, which include diffraction efficiency, sensitivity, refractive index modulation, volume shrinkage, etc. Various photochemistry parameters were obtained by using Levenberg–Marquardt's algorithms to fit the photobleaching model. The storage life of photopolymer film was studied, and holograms were successfully recorded and reconstructed in high fidelity and contrast.