Combined site-specific release retardant mini-matrix tablets (C-SSRRMT) for extended oral delivery of dexketoprofen trometamol: in vitro evaluation and single versus multiple doses pharmacokinetic study in human volunteers

Abstract

Development of extended release oral formulations of dexketoprofen trometamol (DT), a rapidly eliminated drug with high solubility, poses a great challenge especially when a portion of the dose is to be absorbed from the colon. In this study, site-specific release-retardant mini-matrix tablets (SSRRMTs) were developed and functionally coated with pH-responsive materials to achieve a site-specific delivery of DT at the duodenojejunal (DSRRMT) and ileocecal (ISRRMT) regions. Stomach-specific coated mini-tablets (SSCMTs) were manufactured for immediate release of about 16% of the daily dose of DT in the stomach. The SSCMT, DSRRMT, and ISRRMT were combined into a solid dosage form (C-SSRRMT tablets or capsules) to achieve the required linear release profile for once daily administration of DT. The SSRRMT and C-SSRRMT formulations were evaluated for the physical properties, in vitro-disintegration and in vitro dissolution and proved to be consistent with the pharmacopeial specifications. The in vitro release profiles of both C-SSRRMT tablets and capsules showed a constant release rate of about 6?mg/h and were similar to that of the theoretical target linear release profile. The pharmacokinetic study using human volunteers showed the bioequivalence of a single oral dose of C-SSRRMT capsules compared to three-successive oral doses of the immediate release market tablets with less ups and downs in the drug levels. The C-SSRRMT capsules formulation, may therefore, constitute an advance in the extended oral delivery of DT without the lack of efficacy and the adverse events frequently encountered in multiple daily dosing of the immediate release tablets.     

pH-sensitive hydrogels based on semi-interpenetrating network (semi-IPN) of chitosan and polyvinyl pyrrolidone for clarithromycin release

The aim of this study was to develop a pH-sensitive chitosan/polyvinyl pyrrolidone (PVP) based controlled drug release system for clarithromycin. The hydrogels were synthesized by cross-linking chitosan and PVP blend with glutaraldehyde to form a semi-interpenetrating polymer network (semi-IPN). These semi-IPNs were studied for their content uniformity, swelling index (SI), mucoadhesion, wettability, in vitro release and their release kinetics. The hydrogels showed more than 97% content of clarithromycin. These hydrogels showed high swelling and mucoadhesion under acidic conditions. The swelling may be due to the protonation of a primary amino group on chitosan. In acidic condition, chitosan would be ionized, and adhesion could have occurred between the positively charged chitosan and the negatively charged mucus. In the alkaline condition, less swelling and mucoadhesion was noticed. In vitro release study revealed that formulation containing chitosan (2% w/v) and PVP (4% w/v) in the ratio of 21:4 showed complete drug release after 12?h. Release profile showed that all the formulations followed non-Fickian diffusion mechanism. The cross-linking and compatibility of clarithromycin in the formulation was studied by Fourier transform infrared (FTIR) spectroscopic analysis, differential scanning calorimetry (DSC) and powder X-ray diffraction (p-XRD) study, which confirmed proper formation of semi-IPN and stability of clarithromycin in the formulations. The surface morphology of semi-IPN was studied before and after dissolution in simulated gastric fluid (SGF, pH 1.2) which revealed pores formation in membrane after dissolution. The results of study suggest that semi-IPNs of chitosan/PVP are potent candidates for delivery of clarithromycin in acidic environment.     

Preparation and evaluation of gel formulations for oral sustained delivery to dysphagic patients

Background: Oral sustained release gel formulations may provide a means of administering drugs to dysphagic and geriatric patients who have difficulties with handling and taking oral dosage forms. Aim: We have designed gel formulations for the oral administration of paracetamol with suitable rheological characteristics for ease of administration to patients with swallowing difficulties and sufficient integrity in the acidic environment of the stomach to achieve a sustained release of this drug. Method: Gels formed by gelatin, agar, gellan, pectin, and xyloglucan were assessed for suitable gel strength and in vitro and in vivo release characteristics. Results: Gellan (1.5%?w/v) and xyloglucan gels (1.5%?w/w) had acceptable gel strengths for ease of swallowing and retained their integrity in the rat stomach sufficiently well to sustain the release of paracetamol over a period of 6 hours. Comparison of 1.5%?xyloglucan gels with a commercially available preparation with identical paracetamol concentrations demonstrated improved sustained release properties of the xyloglucan gels. Conclusions: Gels formed by gellan and xyloglucan have suitable rheological and sustained release characteristics for potential use as vehicles for oral delivery of drugs to dysphagic patients.     

Development and uniform evaluation of ropinirole osmotic pump tablets with REQUIP XL both in vitro and in beagle dogs

REQUIP XL, prolonged release formulation of ropinirole hydrochloride (RH) in market, could release ropinirole constantly and showed satisfactory therapeutic effect and good compliance. REQUIP XL was composed of more than 10 kinds of excipients and prepared by Geomatrix technology, which was complex and laborious. The purpose of this study was to obtain a dosage form of RH with similar in vitro release profile and bioequivalence in vivo compared to REQUIP XL. Osmotic pump tablet combined with fast release phase was selected as the delivery system of RH and similar release curves were obtained in different media. The tablets were also administered to beagle dogs and the pharmacokinetic parameters were calculated using a non-compartmental model. C_max, t_max, mean residence time (MRT), and area under the curve from 0 to 24?h (AUC_0–24) were 3.97?±?0.53?ng/mL, 3.58?±?0.49?h, 8.29?±?0.93?h, and 35.20?±?8.11?ng/mL???h for ropinirole osmotic pump tablets (ROPT) and 4.15?±?1.07?ng/mL, 2.92?±?0.49?h, 7.84?±?1.09?h, and 34.34?±?10.06?ng/mL???h for REQUIP XL. The log-transformed mean C_max and AUC_0–24 of ROPT were about 92.15% and 102.49% relative to that of REQUIP XL, respectively. The 90% confidence intervals of C_max and AUC_0–24 for ROPT were 75.69–115.31% and 88.89–122.30%, respectively. So it could be concluded that ROPT was uniform with REQUIP XL both in vitro and in beagles and the release profiles of Geomatrix technology may be obtained by osmotic pump combined with fast release technology.     

Pharmacokinetics of a novel liquid controlled release codeine formulation

Codeine is an important opioid anti-tussive agent whose short half-life (2.9?±?0.7?h) requires that it be administered at 4-h intervals when formulated as a simple aqueous solution. Liquid controlled release codeine formulations such as an older Codipertussin^® formulation, which contained codeine bound to an ion exchange resin and coated with a retardant polymer, achieved an equivalent bioavailability when administered every 12?h. An accompanying paper described the development and in vitro characterization of a novel Codipertussin^® formulation containing a non-coated codeine:ion exchange resin (Amberlite IR 69 F) complex. In this study, the bioavailability of codeine from this new liquid controlled release formulation was investigated in an open label, single center, randomized, steady-state, cross-over study in healthy male volunteers. Participants received either 69.7?mg codeine as the controlled release liquid form every 12?h or 23.2?mg codeine in solution every 4?h. Controlled release from the suspension of beads protracted the apparent mean half life of codeine from 3.2?h to 8.2?h, while the mean AUC_{0–12 h} was unchanged. In vivo codeine release profiles were further derived by the numerical deconvolution method, using the data from the drug solution as weighting function for the body system. Comparison of the data obtained with the in vitro release data presented in our earlier work showed an acceptable in vitro–in vivo correlation, which was described as in vitro–in vivo relationship, indicating the power of the in vitro method to predict in vivo pharmacokinetic behavior.     

Formulation and evaluation of floating tablet of H2-receptor antagonist

Context: Conventional sustained dosage form of ranitidine hydrochloride (HCl) does not prevent frequent administration due to its degradation in colonic media and limited absorption in the upper part of GIT.

Objectives: Ranitidine HCl floating tablet was formulated with sublimation method to overcome the stated problem.

Methods: Compatibility study for screening potential excipients was carried out using Fourier transform infrared spectroscopy (FT-IR) and differential scanning chromatography (DSC). Selected excipients were further evaluated for optimizing the formulation. Preliminary screening of binder, polymer and sublimating material was based on hardness and drug release, drug release with release kinetics and floating lag time with total floatation time, respectively. Selected excipients were subjected to 3² factorial design with polymer and sublimating material as independent factors. Matrix tablets were obtained by using 16/32” flat-faced beveled edges punches followed by sublimation.

Results: FT-IR and DSC indicated no significant incompatibility with selected excipients. Klucel-LF, POLYOX WSR N 60?K and l-menthol were selected as binder, polymer and sublimating material, respectively, for factorial design batches after preliminary screening. From the factorial design batches, optimum concentration to release the drug within 12?h was found to be 420?mg of POLYOX and 40?mg of l-menthol. Stability studies indicated the formulation as stable.

Conclusion: Ranitidine HCl matrix floating tablets were formulated to release 90% of drug in stomach within 12?h. Hence, release of the drug could be sustained within narrow absorption site. Moreover, the dosage form was found to be floating within a fraction of second independent of the pH of media ensuring a robust formulation.     

A novel automated alternating current biosusceptometry method to characterization of controlled-release magnetic floating tablets of metronidazole

Context: Alternating Current Biosusceptometry is a magnetically method used to characterize drug delivery systems. This work presents a system composed by an automated ACB sensor to acquire magnetic images of floating tablets.

Objective: The purpose of this study was to use an automated Alternating Current Biosusceptometry (ACB) to characterize magnetic floating tablets for controlled drug delivery.

Materials and methods: Floating tablets were prepared with hydroxypropyl methylcellulose (HPMC) as hydrophilic gel material, sodium bicarbonate as gas-generating agent and ferrite as magnetic marker. ACB was used to characterize the floating lag time and the tablet hydration rate, by quantification of the magnetic images to magnetic area. Besides the buoyancy, the floating tablets were evaluated for weight uniformity, hardness, swelling and in vitro drug release.

Results: The optimized tablets were prepared with equal amounts of HPMC and ferrite, and began to float within 4?min, maintaining the flotation during more than 24?h. The data of all physical parameters lied within the pharmacopeial limits. Drug release at 24?h was about 40%.

Conclusions: The ACB results showed that this study provided a new approach for in vitro investigation of controlled-release dosage forms. Moreover, using automated ACB will also be possible to test these parameters in humans allowing to establish an in vitro.in vivo correlation (IVIVC).     

Oral liquid in situ gelling methylcellulose/alginate formulations for sustained drug delivery to dysphagic patients

Background: Elderly patients with swallowing dysfunction may benefit from the oral administration of liquid dosage forms with in situ gelling properties.

Aim: We have designed in situ gelling liquid dosage formulations composed of mixtures of methylcellulose, which has thermally reversible gelation properties and sodium alginate, the gelation of which is ion-responsive, with suitable rheological characteristics for ease of administration to dysphagic patients and suitable integrity in the stomach to achieve a sustained release of drug.

Method: The rheological and gelation characteristics of solutions containing methylcellulose (2.0%) and sodium alginate (0.25–1.0%) were assessed for their suitability for administration to dysphagic patients. The gel strength and in vitro and in vivo release characteristics of gels formed by selected formulations were compared using paracetamol as a model drug.

Results: Mixtures of 2.0% methylcellulose and 0.5% alginate containing 20% d-sorbitol were of suitable viscosity for ease of swallowing by dysphagic patients and formed gels at temperatures between ambient and body temperature allowing administration in liquid form and in situ gelation in the stomach. In vitro release of paracetamol from 2.0% methylcellulose/0.5% alginate gels was diffusion-controlled at pH 1.2 and 6.8. Measurement of plasma levels of paracetamol after oral administration to rats of a 2.0% methylcellulose/0.5% alginate formulation showed improved sustained release compared to that from 2.0% methylcellulose and 0.5% alginate solutions and from an aqueous solution of paracetamol.

Conclusions: Solutions of mixtures of methylcellulose and alginate in appropriate proportions are of suitable consistency for administration to dysphagic patients and form gels in situ with sustained release characteristics.     

In situ gelling formulation based on methylcellulose/pectin system for oral-sustained drug delivery to dysphagic patients

Background: Oral-sustained release gel formulations with suitable rheological properties have been proposed as a means of improving the compliance of dysphagic and geriatric patients who have difficulties with handling and swallowing oral dosage forms. Aim: We have modified the rheological and release properties of thermally reversible methylcellulose solutions by admixture with pectin, the gelation of which is ion-responsive, with the aim of formulating an in situ gelling vehicle suitable for oral-sustained drug delivery. Method: Gels formed by solutions containing methylcellulose (1.0–2.0%) and pectin (0.5–2.0%) were assessed for suitable gel strength, and in vitro and in vivo release of paracetamol. Results: Addition of 1.5% pectin to a 2.0% methylcellulose formulation containing 20% d-sorbitol and calcium ions in complexed form increased the gel strength and provided a formulation with a suitable viscosity for ease of swallowing by dysphagic patients. Gels formed in situ after oral administration of this formulation retained their integrity in the rat stomach for sufficient time for sustained release to be achieved. In vitro release of paracetamol from methylcellulose, pectin, and methylcellulose/pectin gels was diffusion-controlled. Plasma levels of paracetamol after oral administration to rats (gastric pH 2.6 and 5.5) of a solution including 2.0% methylcellulose/1.5% pectin showed improved sustained release compared with that from both 2.0% methylcellulose and 1.5% pectin solutions. Conclusions: The addition of suitable concentrations of pectin to methylcellulose solutions produces in situ gelling formulations with suitable viscosity for administration to dysphagic patients and improved sustained release characteristics.     

Development and in vitro evaluation of floating rosiglitazone maleate microspheres

Background: Various approaches have been used to retain the dosage form in stomach as a way of increasing the gastric residence time, including floatation systems; high-density systems; mucoadhesive systems; magnetic systems; unfoldable, extensible, or swellable systems; and superporous hydrogel systems. Aim?: The objective of this study was to prepare and evaluate floating microspheres of rosiglitazone maleate for the prolongation of gastric residence time. Method: The microspheres were prepared by solvent diffusion–evaporation method using ethyl cellulose and hydroxypropylmethylcellulose. A full factorial design was applied to optimize the formulation. Results: Preliminary studies revealed that the polymer:drug ratio, concentration of polymer, and stirring speed significantly affected the characteristics of microspheres. The optimum batch exhibited a prolonged drug release, remained buoyant for >12 hours, high entrapment efficiency, and particle size in the order of 350 μm. Conclusion: The results of 32 full factorial design revealed that the concentration of ethylcellulose 7 cps (X₁) and stirring speed (X₂) significantly affected drug entrapment efficiency, percentage release after 8 h and particle size of microspheres.     

Chitosan based mucoadhesive nanoparticles of ketoconazole for bioavailability enhancement: formulation,optimization, in vitro and ex vivo evaluation

Purpose: The conventional dosage form of Ketoconazole (KZ) shows poor absorption due to rapid gastric emptying. Chitosan based mucoadhesive nanoparticles (NPs) of KZ were developed to efficiently release drug at its absorption window i.e. stomach and the site of action i.e. esophagus.

Method: The NPs were prepared by ionic gelation method. Concentration of polymer, cross-linking agent and ratio of drug/polymer as well as polymer/cross linking agent were optimized.

Results: NPs had 69.16?±?5.91% mucin binding efficiency, particle size of 382.6?±?2.384?nm, ζ potential of +48.1?mv and entrapment efficiency of 59.84 ± 1.088%. DSC thermogram indicated absence of any drug polymer interaction. The drug release was by controlled, non-fickian diffusion mechanism. Ex vivo diffusion studies were performed by emptying the stomach contents after 2?h to simulate in vivo gastric emptying. The results showed that drug diffusion from the solution across stomach mucosa stopped after emptying whereas that from the NPs continued upto 5?h. Hence we could conclude that the NPs must have adhered to the stomach mucosa and thereby would have been retained at this absorption site even after gastric emptying.

Conclusion: The orally delivered KZ loaded mucoadhesive NPs can be used as an efficient carrier for delivering drug at its absorption window i.e. the stomach and the site of action i.e. esophagus even after gastric emptying.     

Nifedipine di-matrix depot tablets prepared by compression coating for obtaining zero-order release

Compression coating is a possible process for obtaining zero-order release. Nifedipine compression-coated (CC) di-matrix depot tablets were prepared from a single punch tablet press with low viscosity hydroxypropyl cellulose (HPC-L) as the inner polymer, and with middle viscosity hydroxypropyl cellulose (HPC-M), HPC-L and Eudragit RSPO as outer polymers. The release behavior and mechanisms in vitro of the final tablets were investigated, and gravimetric analysis was used to study the release mechanism. The fast release of the core depot and slow release of the outer depot with time formed total zero-order release. The results showed that the formulation presented ideal zero-order release at the weight ratio of nifedipine 3:5 (core: layer), the combination of HPC-L and HPC-M (56:25) in the outer depot, and with the core depot placed in the center. The CC tablets released to more than 95% in 24?h and fitted a zero-order model with the equation M_t/M^∞?=?0.038t (R²?=?0.98555). In conclusion, zero-order release of nifedipine over 24?h could be achieved by applying polymer HPC-L and HPC-M with the compression coating technique.     

Comparison of pharmacokinetics in beagle dogs of nimesulide bilayer tablets with dispersible tablets

The purpose of this study was to compare the in vitro release and the in vivo pharmacokinetics of bilayer tablets with the conventional dispersible tablets of nimesulide. The tablets were administered to beagle dogs and the plasma levels of nimesulide were determined by high-performance liquid chromatography-MS/MS. The pharmacokinetic parameters were calculated using a noncompartmental model. The bilayer tablets showed a biphasic in vitro release pattern with initial burst release and sustained release following the quasi-Fickian diffusion-based release mechanism. The C_max, t_max, mean residence time (MRT), and area under the curve from 0 to 36 h were 10.8 ± 4.2 μg/mL, 2.3 ± 1.0 h, 6.7 ± 2.1 h, 81.5 ± 26.7 μg·h/mL for the bilayer tablets and 14.8 ± 5.8 μg/mL, 2.7 ± 0.8 h, 5.6 ± 0.9 h, 95.4 ± 44.2 μg·h/mL for the dispersible tablets. Compared with the dispersible tablets, the bilayer tablets have lower C_max, similar t_max, and longer MRT. The aforementioned pharmacokinetic parameters, especially the MRT demonstrated to be valuable for evaluating the biphasic characteristics. This study provides a promising in vivo evaluation method for the bilayer tablets with biphasic release pattern.     

Freeze drying: exploring potential in development of orodispersible tablets of sumatriptan succinate

The present investigation is aimed at development and characterization of sumatriptan succinate orodispersible tablets (ODTs) prepared by freeze drying technology. The tablet excipients were screened and the composition was optimized based on parameters which involved general appearance, tablet size and shape, uniformity of weight, mechanical properties, surface pH, moisture analysis, drug content, wetting time, in vitro and in vivo disintegration time. Furthermore, fourier transform infrared spectroscopy, differential scanning calorimetry, scanning electron micrograph of cross-section of the tablet and in vitro dissolution studies were performed. Studies revealed that formulation containing gelatin–mannitol (3.75% w/v and 3.5% w/v, respectively) with camphor as a volatile pore forming agent exhibited superior properties with disintegration time of less than 10?s. Furthermore, in vitro release studies revealed 90% release of drug from developed dosage form within 10?min, thus suggesting rapid drug dissolution followed by faster onset of action, which forms a strong rationale for development of ODTs of sumatriptan succinate. The developed technology is simple, which involves few steps and can be easily scaled up. Thus, it holds enormous potential for commercial exploitation.     

Design and in vitro characterization of buccoadhesive tablets of timolol maleate

Objective: The purpose of this work was to develop and evaluate buccoadhesive tablets of timolol maleate (TM) due to its potential to circumvent the first-pass metabolism and to improve its bioavailability.

Methods: The tablets were prepared by direct compression using two release modifying polymers, Carbopol 974P (Cp-974p) and sodium alginate (SA). A 3² full factorial design was employed to study the effect of independent variables, Cp-974p and SA, in various proportions in percent w/w, which influences the in vitro drug release and bioadhesive strengths. Physicochemical properties of the drug were evaluated by ultraviolet, Fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC) and powder X-ray diffraction (P-XRD). Tablets were evaluated for hardness, thickness, weight variation, drug content, surface pH, swelling index, bioadhesive force and in vitro drug release.

Results: The FTIR and DSC studies showed no evidence of interactions between drug, polymers and excipients. The P-XRD study revealed that crystallinity of TM remain unchanged in optimized formulation tablet. Formulation F9 achieves an in vitro drug release of 98.967%?±?0.28 at 8?h and a bioadhesive force of 0.088 N?±?0.01211.

Conclusion: We successfully developed buccal tablet formulations of TM and describe a non-Fickian-type anomalous transport as the release mechanism.     

The impact of manufacturing variables on in vitro release of clobetasol 17-propionate from pilot scale cream formulations

Objectives: The purpose of the study was to evaluate the effect of different homogenization speeds and times, anchor speeds and cooling times on the viscosity and cumulative % clobetasol 17-propionate released per unit area at 72?h from pilot scale cream formulations. A 2⁴ full factorial central composite design for four independent variables were investigated.

Materials and methods: Thirty pilot scale batches of cream formulations were manufactured using a Wintech® cream/ointment plant. The viscosity and in vitro release of CP were monitored and compared to an innovator product that is commercially available on the South African market, namely, Dermovate® cream.

Results and discussion: Contour and three-dimensional response surface plots were produced and the viscosity and cumulative % CP released per unit area at 72?h were found to be primarily dependent on the homogenization and anchor speeds. An increase in the homogenization and anchor speeds appeared to exhibit a synergistic effect on the resultant viscosity of the cream whereas an antagonistic effect was observed for the in vitro release of CP from the experimental cream formulations. The in vitro release profiles were best fitted to a Higuchi model and diffusion proved to be the dominant mechanism of drug release that was confirmed by use of the Korsmeyer–Peppas model.

Conclusion: The research was further validated and confirmed by the high prognostic ability of response surface methodology (RSM) with a resultant mean percentage error of (±SD) 0.17?±?0.093 suggesting that RSM may be an efficient tool for the development and optimization of topical formulations.     

Preparation,release and pharmacokinetics of a risperidone elementary osmotic pump system

Preparation and in vitro/in vivo evaluation of risperidone elementary osmotic pump (RIS-EOP) formulations were investigated. A method for the preparation of RIS-EOP tablets was developed by modulating RIS solubility with citric acid. The influence of osmotic agents and the compositions of semipermeable membrane on drug release profiles was evaluated. The formulation of RIS-EOP was optimized by orthogonal design. The in vitro release profile of the optimum formulation achieved to deliver RIS at an approximate zero-order up to 12?h. The pharmacokinetic profiles of RIS-EOP were evaluated compared with immediate release tablets in beagle dogs. The mean t_max and mean residence time of RIS-EOP for RIS and its active metabolite, 9-hydroxyrisperidone, were remarkably longer, compared with immediate release tablets. These results corroborated prolonged release of RIS from EOP formulations. Moreover, drug plasma levels with lower fluctuations could be achieved with RIS-EOP tablets. These results suggested that increasing drug solubility by adding or reacting with alkali/acid might be used for the preparation of EOP tablets of certain poorly water-soluble drugs.     

pH-independent immediate release polymethacrylate formulations – an observational study

Abstract

Using Eudragit® E PO (EudrE) as a polymethacrylate carrier, the aim of the study was to develop a pH-independent dosage form containing ibuprofen (IBP) as an active compound via chemical modification of the polymer (i.e. quaternization of amine function) or via the addition of dicarboxylic acids (succinic, glutaric and adipic acid) to create a pH micro-environment during dissolution. Biconvex tablets (diameter: 10?mm; height: 5?mm) were produced via hot melt extrusion and injection molding. In vitro dissolution experiments revealed that a minimum of 25% of quaternization was sufficient to partially (up to pH 5) eliminate the pH-dependent effect of the EudrE/IBP formulation. The addition of dicarboxylic acids did not alter IBP release in a pH 1 and 3 medium as the dimethyl amino groups of EudrE are already fully protonated, while in a pH 5 solvent IBP release was significantly improved (cf. from 0% to 92% release after 1?h dissolution experiments upon the addition of 20?wt.% succinic acid). Hence, both approaches resulted in a pH-independent (up to pH 5) immediate release formulation. However, the presence of a positively charged polymer induced stability issues (recrystallization of API) and the formulations containing dicarboxylic acids were classified as mechanically unstable. Hence, further research is needed to obtain a pH-independent immediate release formulation while using EudrE as a polmethacrylate carrier.     

Sildenafil vaginal suppositories: preparation,characterization, in vitro and in vivo evaluation

Aim: The main objective was to investigate the in vitro release profile/kinetics, and in vivo plasma pharmacokinetics (PK) and organ biodistribution (BD) of the prepared sildenafil vaginal suppositories (SVS).

Methods: Suppositories containing 25?mg of sildenafil were prepared by the cream melting technique using Witepsol H-15 as a suppository base. The suppositories were characterized for weight variation, content uniformity, hardness, disintegration time and crystallinity change. The in vitro dissolution in pH 4.5, and in vivo plasma PK and organ BD of sildenafil from SVS in female Sprague Dawley rats, were also investigated.

Results: The mean weight variation, content uniformity, hardness and disintegration time of the prepared SVS were 1.127?±?0.020?g, 98.25?±?2.50%, 2.5?±?0.08?kg and 9?±?1.0?min, respectively. The release of sildenafil from the SVS was more than 90% at 30?min, with a release kinetic of Hixson--Crowell model and non-Fickian diffusion (n?=?0.464). The plasma PK study demonstrated a significantly lower C_max (～10 times) and AUC_0–24?h (～13 times) of sildenafil in plasma following intravaginal (IVG) administration of suppositories compared to oral (PO) administration of sildenafil solution. Nevertheless, the organ BD study showed a phenomenally higher C_max (～40 times) and AUC_0–24?h (～20 times) of sildenafil in uterus following IVG administration of suppositories than PO administration of sildenafil solution.

Conclusion: This study demonstrated enhanced sildenafil exposure in the uterus following IVG administration of SVS, which could be used to target the uterus for therapeutic benefits.     

Bioavailability enhancement of baclofen by gastroretentive floating formulation: statistical optimization,in vitro and in vivo pharmacokinetic studies

Objectives: The study was aimed to improve bioavailability of baclofen by developing gastroretentive floating drug delivery system (GFDDS).

Methods: Preliminary optimization was done to select various release retardants to obtain minimum floating lag time, maximum floating duration and sustained release. Optimization by 3² factorial design was done using Polyox WSR 303 (X₁) and HPMC K₄M (X₂) as independent variables and cumulative percentage drug released at 6?h (Q6h) as dependent variable.

Results: Optimized formulation showed floating lag time of 4–5 s, floated for more than 12?h and released the drug in sustained manner. In vitro release followed zero ordered kinetics and when fitted to Korsemeyer Peppas model, indicated drug release by combination of diffusion as well as chain relaxation. In vivo floatability study confirmed floatation for more than 6?h. In vivo pharmacokinetic studies in rabbits showed C_max of 189.96?±?13.04?ng/mL and T_max of 4?±?0.35?h for GFDDS. The difference for AUC_(0–T) and AUC_(0–∞) between the test and reference formulation was statistically significant (p > 0.05). AUC_(0–T) and AUC_(0–∞) for GFDDS was 2.34 and 2.43 times greater than the marketed formulation respectively.

Conclusion: GFDDS provided prolonged gastric residence and showed significant increase in bi oavailability of baclofen.