Preparation and Evaluation of Self-Microemulsifying Drug Delivery System Containing Vinpocetine

The main purpose of current investigation is to prepare a self-microemulsifying drug delivery system (SMEDDS) to enhance the oral bioavailability of vinpocetine, a poorly water-soluble drug. Suitable vehicles were screened by determining the solubility of vinpocetine in them. Certain surfactants were selected according to their emulsifying ability with different oils. Ternary phase diagrams were used to identify the efficient self-microemulsifying region and to screen the effect of surfactant/cosurfactant ratio (K_m). The optimized formulation for in vitro dissolution and bioavailability assessment was oil (ethyl oleate, 15%), surfactant (Solutol HS 15, 50%), and cosurfactant (Transcutol^® P, 35%). The release rate of vinpocetine from SMEDDS was significantly higher than that of the commercial tablet. Pharmacokinetics and bioavailability of SMEDDS were evaluated. It was found that the oral bioavailability of vinpocetine of SMEDDS was 1.72-fold higher as compared with that of the commercial tablet. These results obtained demonstrated that vinpocetine absorption was enhanced significantly by employing SMEDDS. Therefore, SMEDDS might provide an efficient way of improving oral bioavailability of poorly water-soluble drugs.     

Development of microemulsion of mitotane for improvement of oral bioavailability

Background: Mitotane (o,p′-DDD) is considered to be the drug of choice in the treatment of nonresectable and metastasized adrenocortical carcinoma. However, mitotane has poor solubility in the gastrointestinal tract and very low bioavailability. Consequently, to achieve therapeutic plasma level, high cumulative doses (4–6 g/day) of mitotane were usually used during 3–5 months. To shorten this equilibration time and reduce gastrointestinal side effects, a self-microemulsifying drug delivery system (SMEDDS) of mitotane has been developed. Method: First time, the solubility of mitotane was determined in various oils and surfactants; then, the influence of oils, surfactants, and cosurfactants on the formation of SMEDDS was investigated by constructing ternary phase diagrams. SMEDDS was characterized by morphological observations and droplet size measurements. Intestinal drug permeation of SMEDDS of mitotane (3 mM) was assessed in an Ussing-type apparatus and the bioavailability was determined in a rabbit model. Results: The optimum formulation consisted of a mixture of Capryol®, Tween®, and Cremophor® EL (33:33:33). The formulation was found to pass through the intestinal barrier much faster than a solution of mitotane (14.85 ± 0.8 versus 3.03 ± 0.2 μmol/cm²). Moreover, after oral administration in rabbits, the relative bioavailability was 3.4, compared with that of the conventional form (Lysodren®). Conclusion: This SMEDDS can now be considered as a very good candidate to optimize the administration of mitotane.     

In situ intestinal permeability and in vivo absorption characteristics of olmesartan medoxomil in self-microemulsifying drug delivery system

To characterize the intestinal absorption behavior of olmesartan medoxomil (OLM) and to evaluate the absorption-improving potential of a self-microemulsifying drug delivery system (SMEDDS), we performed in situ single-pass intestinal perfusion (SPIP) and in vivo pharmacokinetic studies in rats. The SPIP study revealed that OLM is absorbed throughout whole intestinal regions, favoring proximal segments, at drug levels of 10–90 μM. The greatest value for effective permeability coefficient (P_eff) was 11.4?×?10^?6 cm/s in the duodenum (90 μM); the lowest value was 2.9?×?10^?6 cm/s in the ileum (10 μM). A SMEDDS formulation consisting of Capryol 90, Labrasol, and Transcutol, which has a droplet size of 200?nm and self-dispersion time of 21 s, doubled upper intestinal permeability of OLM. The SMEDDS also improved oral bioavailability of OLM in vivo: a 2.7-fold increase in the area under the curve (AUC) with elevated maximum plasma concentration (C_max) and shortened peak time (T_max) compared to an OLM suspension. A strong correlation (r²?=?0.955) was also found between the in situ jejunal P_eff and the in vivo AUC values. Our study illustrates that the SMEDDS formulation holds great potential as an alternative to increased oral absorption of OLM.     

Design and evaluation of a self-microemulsifying drug delivery system for apigenin

Objective of this study was to prepare, characterize and evaluate a self-microemulsifying drug delivery system (SMEDDS) with the aim to improve the solubility and dissolution of apigenin. Ternary phase diagrams were constructed in order to obtain the most efficient self-emulsification region, and the formulation of apigenin loaded SMEDDS was optimized by a simplex lattice experiment design. The optimal formulation of SMEDDS obtained was comprised of 60% Cremophor^®EL, 30% Transcutol^®HP and 10% Capryol? 90. The equilibrium solubility of apigenin in SMEDDS was about 15 mg/g, and it could increase the solubility of apigenin in water for about 7500 folds. Apigenin loaded SMEDDS could turn into microemulsion when diluted with distilled water and the droplets were spherical under transmission electron microscope (TEM), the average particle size was 17.1 nm and zeta potential ?5.18 mV. In vitro dissolution studies showed about 95% of apigenin was released within 10 min. All of the results showed that SMEDDS could enhance the solubility and dissolution of apigenin, and would be a potential carrier to improve the oral absorption of apigenin, a poorly water soluble drug.     

Design and development of a self-microemulsifying drug delivery system of olmesartan medoxomil for enhanced bioavailability

Olmesartan medoxomil (OM) is a hydrophobic antihypertensive drug with low bioavailability (26%) and is known to have adverse effects such as celiac disease and enteropathy. The purpose of this study was to develop SMEDDS to increase bioavailability and decrease potential side effects of OM. Hydrophilic lipophilic balance was calculated by testing solubility of OM in different oils, surfactants, and cosurfactants to obtain the most suitable combination of SMEDDS. Pseudoternary phase diagram was used to select the better oil/water formulation of SMEDDS. After a test for 3-month stability, dissolution tests and parallel artificial membrane permeability assay (PAMPA) were conducted to investigate drug solubility and permeability. Biodistribution of fluorescent marked SMEDDS was observed by using in vivo imaging system. The pharmacodynamics of the drug were determined by measuring blood pressure from tails of rats. At the end of the experiment, intestines were examined for adverse effects of OM. Compared with tablet formulation according to the dissolution study, SMEDDS formulation showed 1.67 times improvement in solubility of OM. PAMPA studies suggested a much faster permeability rate for OM SMEDDS compared to the suspension form. Labeled SMEDDS gave 3.96 times stronger fluorescent emission than control dye administered mice in in vivo imaging system (IVIS^®) studies, indicating an increased bioavailability. Treating effect of SMEDDS was 3.1 times more efficient compared to suspension in hypertensive rats. It caused neither celiac-like enteropathy nor diarrhea, during 21-day noninvasive blood pressure system (NIBP) assay. Our results suggest that SMEEDS formulation improves dissolution and oral bioavailability of OM while reducing its adverse effects.     

Development of self-microemulsifying drug delivery system for oral bioavailability enhancement of berberine hydrochloride

The purpose of this study was to develop a self-microemulsifying drug delivery system (SMEDDS) to improve the oral bioavailability of Berberine hydrochloride (BBH), an important bioactive compound from Chinese Medicines with poor water solubility. Pseudoternary phase diagrams were constructed using oil, surfactant and co-surfactant types to identify the efficient self-microemulsification region. SMEDDS was characterized by morphological observation, droplet size, zeta-potential determination, stability, in vitro release and in vivo bioavailability study. The optimal formulation with the best self-microemulsifying and solubilization ability consisted of 40% (w/w) of ethyl linoleate and oleic acid (2:1), 35% (w/w) Tween-80 and 25% (w/w) glycerol. The SMEDDS of BBH could exhibit good stability. In vitro release test showed a complete release of BBH from SMEDDS was in 5 h. In vivo results indicated that the peak plasma concentration (C_max) and the area under the curve (AUC_{0→12 h}) of SMEDDS of BBH were higher than the commercial tablet by 163.4% and 154.2%, respectively. The relative bioavailability of SMEDDS of BBH was enhanced about 2.42-fold compared with the commercial tablet in rats. The study confirmed that the SMEDDS formulation could be used as a possible alternative to traditional oral formulations of BBH to improve its bioavailability.     

Granulated colloidal silicon dioxide-based self-microemulsifying tablets,as a versatile approach in enhancement of solubility and therapeutic potential of anti-diabetic agent: formulation design and in vitro/in vivo evaluation

The current research work was executed with an aim to explore and promote the potential of self-microemusifying drug delivery systems (SMEDDS) in the form of tablets, in order to enhance solubility and oral bioavailability of poorly aqueous soluble drug Repaglinide (RPG). RPG-loaded liquid SMEDDS were developed consisting Labrafil M 1944CS, Kolliphor EL and Propylene glycol, which were then characterized on various parameters. After characterization and optimization, liquid SMEDDS were converted into solid form by adsorbing on Aeroperl® 300 pharma and polyplasdone^TM XL. Further, selection of suitable excipients was done and mixed with prepared solidified SMEDDS powder followed by the preparation of self-microemulsifying tablets (SMET’s) wet granulation–compression method. SMET’s were subjected to differential scanning calorimetry (DSC) and particle X-ray diffraction (RXRD) studies, results of which indicated transformation of crystalline structure of RPG because of dispersion of RPG at molecular level in liquid SMEDDS. This was further assured by micrographs obtained from scanning electron microscope. SMET’s shown more than 85% (30?min) of in vitro drug release in contrast to conventional marketed tablets (13.2%) and pure RPG drug (3.2%). Results of in vivo studies furnished that SMET’s had shown marked decrease in the blood glucose level and prolonged duration of action (up to 8?h) in comparison with conventional marketed tablets and pure RPG drug. In conclusion, SMET’s serves as a promising tool for successful oral delivery of poorly aqueous soluble drug(s) such as RPG.     

Formulation optimization and pharmacokinetics evaluation of oral self-microemulsifying drug delivery system for poorly water soluble drug cinacalcet and no food effect

The present research indicated that a new self-microemulsifying drug delivery systems (SMEDDS) were used to reduce the food effect of poorly water-soluble drug cinacalcet and enhance the bioavailability in beagle dogs by oral gavage. Ethyl oleate, OP-10, and PEG-200 was selected as the oil phase, surfactant and co-surfactant of cinacalcet-SMEDDS by the solubility and phase diagram studies. Central Composite Design-Response Surface Methodology was used to determine the ratio of surfactant and co-surfactant, the amount of oil for optimizing the SMEDDS formation. The prepared formulations were further characterized by the droplet size, self-microemulsifying time, zeta potential, polydispersity index (PDI), and robustness to dilution. The in vitro release profile of cinacalcet-SMEDDS was determined in four different release medium and in fasted state and fed state of simulated gastrointestinal fluid. Cinaclcet-SMEDDS were implemented under fed and fasted state in dogs and product REGPARA^® was used as a comparison to the prepared formulation in the pharmacokinetics. The result showed the components of SMEDDS, the amount of oil, the ratio of surfactant, and co-surfactant was optimized using solubility, pseudo-ternary phase diagram studies, and response surface methodology. In vitro drug release studies indicated that the cinacalcet-SMEDDS eliminated the effect of pH variability in release medium and variational gastroenteric environments with improved drug release performance. Pharmacokinetic studies revealed that the profiles of cinacalcet-SMEDDS were similar both in the fasted and fed state compared with commercial product, indicating the formulation significantly promoted the absorption, enhanced bioavailability and had no food effect essentially. It is concluded that poorly water-soluble drug cinacalcet was improved in the solubility and bioavailability by using a successful oral dosage form the SMEDDS, and eliminated food effect as well.     

Chlorogenic acid stabilized nanostructured lipid carriers (NLC) of atorvastatin: formulation,design and in vivo evaluation

The present work was aimed at developing an optimized oral nanostructured lipid carrier (NLC) formulation of poorly soluble atorvastatin Ca (AT Ca) and assessing its in vitro release, oral bioavailability and pharmacodynamic activity. In this study, chlorogenic acid, a novel excipient having synergistic cholesterol lowering activity was utilized and explored in NLC formulation development. The drug-loaded NLC formulations were prepared using a high pressure homogenization technique and optimized by the Box-Behnken statistical design using the Design-Expert software. The optimized NLC formulation was composed of oleic acid and stearic acid as lipid phase (0.9% w/v), poloxamer 188 as surfactant (1% w/v) and chlorogenic acid (0.05% w/v). The mean particle size, polydispersity index (PDI) and % drug entrapment efficiency of optimized NLC were 203.56?±?8.57?nm, 0.27?±?0.028 and 83.66?±?5.69, respectively. In vitro release studies showed that the release of drug from optimized NLC formulations were markedly enhanced as compared to solid lipid nanoparticles (SLN) and drug suspension. The plasma concentration time profile of AT Ca in rats showed 3.08- and 4.89-fold increase in relative bioavailability of developed NLC with respect to marketed preparation (ATORVA® tablet) and drug suspension, respectively. Pharmacodynamic study suggested highly significant (**p?0.01) reduction in the cholesterol and triglyceride values by NLC in comparison with ATORVA® tablet. Therefore, the results of in vivo studies demonstrated promising prospects for successful oral delivery of AT Ca by means of its chlorogenic acid integrated NLC.     

Improved solubility and oral bioavailability of apigenin via Soluplus/Pluronic F127 binary mixed micelles system

The aim of this study was to develop a novel mix micelles system composing of two biocompatible copolymers of Soluplus^® and Pluronic F127 to improve the solubility, oral bioavailability of insoluble drug apigenin (AP) as model drug. The AP-loaded mixed micelles (AP-M) were prepared by ethanol thin-film hydration method. The formed optimal formulation of AP-M were provided with small size (178.5?nm) and spherical shape at ratio of 4:1 (Soluplus^®:Pluronic F127), as well as increasing solubility of to 5.61?mg/mL in water which was about 3442-fold compared to that of free AP. The entrapment efficiency and drug loading of AP-M were 95.72 and 5.32%, respectively, and a sustained release of AP-M was obtained as in vitro release study indicated. Transcellular transport study showed that the cell uptake of AP was increased in Caco-2 cell transport models. The oral bioavailability of AP-M was 4.03-fold of free AP in SD rats, indicating the mixed micelles of Soluplus^® and Pluronic F127 is an industrially feasible drug delivery system to promote insoluble drug oral absorption in the gastrointestinal tract.     

Enhanced oral delivery and anti-gastroesophageal reflux activity of curcumin by binary mixed micelles

The aim of this study was to improve the solubility, oral bioavailability, and anti-gastroesophageal reflux activity of curcumin (CM) by preparing two CM-loaded, novel, binary mixed micelles (CM-M). The two CM-M were prepared by ethanol thin-film hydration method. One (CM-T) was prepared using D-alpha-tocopheryl polyethylene glycol 1000 succinate and Solutol^®HS15, and the other (CM-F) was prepared using Pluronic^®F127 and Solutol^®HS15. The entrapment efficiency and drug loading of CM-T were 83.61?±?0.54% and 2.20?±?0.65%, respectively, which were lower than those of CM-F (88.66?±?0.12% and 1.47?±?0.26%, respectively). TEM results demonstrated that CM-T and CM-F were homogeneous and spherical. The permeability of CM delivered via CM-T and CM-F was enhanced across a Caco-2 cell monolayer, and CM-T and CM-F showed a 5.24- and 4.76-fold increase in relative oral bioavailability, respectively compared with free CM. In addition, the in vivo anti-gastroesophageal reflux study showed that CM-T and CM-F achieved higher anti-gastroesophageal reflux efficacy compared with free CM. Collectively, these findings were indicative of an oral micelle formulation of CM with increased solubility, oral bioavailability, and anti-gastroesophageal reflux activity.     

Pharmacokinetic evaluation of differential drug release formulations of rabeprazole in dogs

Objectives: To develop novel dual release prototype capsule formulations of rabeprazole and evaluation of pharmacokinetic properties relative to the reference product (Aciphex^®) in Beagle dogs.

Methods: The dual release prototype formulations of rabeprazole were developed by preparing optimized mini-tablets core which was subsequently coated with barrier/enteric coating using standard excipients. Both novel prototype formulations were subjected for in vitro release and assay by HPLC-UV to assess long term stability. Single dose pharmacokinetic study used a single sequence three treatments crossover design. In Periods 1 and 2, four dogs received oral 20?mg dose of two prototype formulations. In Period 3, all dogs received a 20?mg oral dose of Aciphex^® reference product. There was a 1-week washout time between two successive periods. A quantitative analysis of rabeprazole/sulfide metabolite in plasma samples was performed using a validated LC-MS/MS assay and PK parameters were estimated by non-compartmental analysis.

Results: The stability of the prototype formulations was confirmed over a period of 24 months with an acceptable assay and dissolution data. One of the novel prototype formulations showed 70% oral bioavailability relative to the reference product. Despite a 30% reduced bioavailability, this showed 1?h delay in peak concentration, longer plasma residence time of rabeprazole (up to 12?h) and longer apparent elimination half-life.

Conclusions: The use of a canine model has enabled the selection of a novel dual-release prototype formulation of rabeprazole for further clinical development.     

Enhancement of oral bioavailability of fenofibrate by solid self-microemulsifying drug delivery systems

A solid form of self-microemulsifying drug delivery system (Solid SMEDDS) was developed by spray-drying with dextran as the inert solid carrier, to improve the oral bioavailability of a poorly water-soluble drug, fenofibrate. The optimized liquid SMEDDS, composed of Labrafil M 1944 CS/Labrasol/Capryol PGMC (15/75/10%v/v) with 10% w/v fenofibrate gave a z-average diameter of around 240?nm. There was no significant difference in the mean droplet size and size distribution of the emulsions obtained from the liquid and solid forms of SMEDDS. Solid state characterizations of solid SMEDDS showed that the crystal state of fenofibrate in solid SMEDDS was converted from crystalline to amorphous form. Solid SMEDDS had significantly higher dissolution rates than the drug powder, due to its fast self-emulsification in the dissolution media. Furthermore, the AUC value of solid SMEDDS was twofold greater than that of the powder, indicating this formulation greatly improved the oral bioavailability of drug in rats. Thus, these results suggest that solid SMEDDS could be used as an effective oral solid dosage form to improve dissolution and oral bioavailability of fenofibrate.     

Improved oral bioavailability of valsartan using proliposomes: design,characterization and in vivo pharmacokinetics

Abstract

The objective of our investigational work was to develop a proliposomal formulation to improve the oral bioavailability of valsartan. Proliposomes were formulated by thin film hydration technique using different ratios of phospholipids:drug:cholesterol. The prepared proliposomes were evaluated for vesicle size, encapsulation efficiency, morphological properties, in vitro drug release, in vitro permeability and in vivo pharmacokinetics. In vitro drug-release studies were performed in simulated gastric fluid (pH 1.2) and purified water using dialysis bag method. In vitro drug permeation was studied using parallel artificial membrane permeation assay (PAMPA), Caco-2 monolayer and everted rat intestinal perfusion techniques. In vivo pharmacokinetic studies were conducted in male Sprague Dawley (SD) rats. Among the proliposomal formulations, F-V was found to have the highest encapsulation efficiency of 95.6?±?2.9% with a vesicle size of 364.1?±?14.9?nm. The in vitro dissolution studies indicated an improved drug release from proliposomal formulation, F-V in comparison to pure drug suspension in both, purified water and pH 1.2 dissolution media after 12?h. Permeability across PAMPA, Caco-2 cell and everted rat intestinal perfusion studies were higher with F-V formulation as compared to pure drug. Following single oral administration of F-V formulation, a relative bioavailability of 202.36% was achieved as compared to pure valsartan.     

Pharmacokinetic and pharmacodynamic studies of nisoldipine-loaded solid lipid nanoparticles developed by central composite design

Abstract

Objective: Nisoldipine (ND) is a potential antihypertensive drug with low oral bioavailability. The aim was to develop an optimal formulation of ND-loaded solid lipid nanoparticles (ND-SLNs) for improved oral bioavailability and pharmacodynamic effect by using a two-factor, three-level central composite design. Glyceryl trimyristate (Dynasan 114) and egg lecithin were selected as independent variables. Particle size (Y₁), PDI (Y₂) and entrapment efficiency (EE) (Y₃) of SLNs were selected as dependent response variables.

Methods: The ND-SLNs were prepared by hot homogenization followed by ultrasonication. The size, PDI, zeta potential, EE, assay, in vitro release and morphology of ND-SLNs were characterized. Further, the pharmacokinetic (PK) and pharmacodynamic behavior of ND-SLNs was evaluated in male Wistar rats.

Results: The optimal ND-SLN formulation had particle size of 104.4?±?2.13?nm, PDI of 0.241?±?0.02 and EE of 89.84?±?0.52%. The differential scanning calorimetry and X-ray diffraction analyses indicated that the drug incorporated into ND-SLNs was in amorphous form. The morphology of ND-SLNs was found to be nearly spherical by scanning electron microscopy. The optimized formulation was stable at refrigerated and room temperature for 3 months. PK studies showed that 2.17-fold increase in oral bioavailability when compared with a drug suspension. In pharmacodynamic studies, a significant reduction in the systolic blood pressure was observed, which sustained for a period of 36?h when compared with a controlled suspension.

Conclusion: Taken together, the results conclusively demonstrated that the developed optimal ND-SLNs caused significant enhancement in oral bioavailability along with pharmacodynamic effect.     

THe Incorporation and in Vitro Release Profiles of Liquid,Deliquescent or Unstable Drugs with Fusible Excipients in Hard Gelatin Capsules

Abstract

The in vitro release profiles of four liquid or deliquescent model drugs incorporated in various Gelucire^R excipients were examined. In every case, it was possible to obtain release of the active substance as rapidly as with the equivalent commercial soft gelatine capsules tested. Gelucire^R grades with high HLB values (despite having high melting points) were found to be the most favorable. Release patterns could be related to the behaviour of the Gelucire^R bases in the gastric fluid

Drug-excipient ratio played a prominent role, which differed when hydrophilic or hydrophobic Gelucire^R types were used. Storage of the capsule formulations for more than two years did not usually change the drug release profiles significantly, but chloral hydrate capsules could not be stocked for more than a few months     

Mucoadhesive elementary osmotic pump tablets of trimetazidine for controlled drug delivery and reduced variability in oral bioavailability

The objectives of this work was preparation and evaluation of the mucoadhesive elementary osmotic pump tablets of trimetazidine hydrochloride to achieve desired controlled release action and augmentation of oral drug absorption. The drug-loaded core tablets were prepared employing the suitable tableting excipients and coated with polymeric blend of ethyl cellulose and hydroxypropyl methylethylcellulose E5 (4:1). The prepared tablets were characterized for various quality control tests and in vitro drug release. Evaluation of drug release kinetics through model fitting suggested the Fickian mechanism of drug release, which was regulated by osmosis and diffusion as the predominant mechanism. Evaluation of mucoadhesion property using texture analyzer suggested good mucoadhesion potential of the developed osmotic systems. Solid state characterization using Fourier-transform infrared spectroscopy, differential scanning calorimetry and powder X-ray diffraction spectroscopy confirmed the absence of any physiochemical incompatibilities between drug and excipients. Scanning electron microscopy analysis showed the smooth surface appearance of the coated tablets with intact polymeric membrane without any fracture. In vivo pharmacokinetic studies in rabbits revealed 3.01-fold enhancement in the oral bioavailability vis-à-vis the marketed formulation (Vastarel MR®). These studies successfully demonstrate the bioavailability enhancement potential of the mucoadhesive elementary osmotic pumps as novel therapeutic systems for other drugs too.     

Effect of polyvinyl caprolactam–polyvinyl acetate–polyethylene glycol graft copolymer on bioadhesion and release rate property of eplerenone pellets

Abstract

The present study involved the design and development of oral bioadhesive pellets of eplerenone. A solid dispersion of eplerenone was developed with a hydrophilic carrier, polyvinyl caprolactam–polyvinyl acetate–polyethylene glycol graft copolymer (Soluplus^®). Bioadhesive pellets were prepared from this solid dispersion using a combination of HPMC K4M and Carbopol 934P. Both the solid dispersion and the pellets were evaluated for various physicochemical properties such as solubility, entrapment efficiency, drug content, surface morphology, mucoadhesion and swelling behavior. Analysis carried out using FT-IR, DSC and XRD found no interaction between the eplerenone and excipients. The solid dispersion had irregular-shaped smooth-surfaced particles of diameter 265?±?105.5?μm. In TEM analysis, eplerenone particles of size 79–120?nm were found. The solubility and dissolution of eplerenone in the Soluplus^®-based solid dispersion were 5.26 and 2.50 times greater, respectively. Investigation of the swelling behavior of the pellets showed that the thickness of the gel layer increased continuously over the duration of the study. Moreover, a correlation was observed between the thickness and strength of the gel layer and the percentage release. The mechanism of drug release was found to be non-Fickian (anomalous), with the release kinetics approaching first-order kinetics. The bioavailability of the eplerenone bioadhesive pellet formulation was studied using Wistar rats and was found to be improved. An in vivo mucoadhesion study showed that the pellets are retained for 24?h in rabbits. It was concluded that Soluplus^® had a positive effect on the solubility and dissolution of pellets without affecting the bioadhesion.     

Formulation design,in vitro characterizations and anti-malarial investigations of artemether and lumefantrine-entrapped solid lipid microparticles

Context: Poor aqueous solubility of artemether and lumefantrine makes it important to seek better ways of enhancing their oral delivery and bioavailability.

Objective: To formulate and carry out in vitro and anti-malarial pharmacodynamic evaluations of solidified reverse micellar solutions (SRMS)-based solid lipid microparticles (SLMs) of artemether and lumefantrine for oral delivery and improved bioavailability.

Materials and methods: Rational blends of Softisan^®154 and Phospholipon^®90H lipid matrices, and different concentrations of artemether and lumefantrine were used to formulate several batches of SLMs. Drug-free SLMs were also formulated. Morphology, particle size, encapsulation efficiency (EE%) and pH studies were performed. In vitro release studies were performed in alcoholic buffer, simulated gastric fluid (SGF) and simulated intestinal fluid (SIF) without enzymes. Anti-malarial pharmacodynamic studies were conducted in mice.

Results: Stable, smooth and spherical particles with sizes ranging from 4.2?±?0.02 to 9.3?±?0.8?µm were formed. EE% of 92.2–97.3% and 30.2–84.7% and pH of 3.0?±?0.02 to 4.9?±?0.12 and 3.0?±?0.02 to 5.8?±?0.05 were obtained for artemether and lumefantrine SLMs, respectively. Release of 100, 88.28 and 75.49%, as well as 63.26, 34.31 and 56.17% were recorded for artemether and lumefantrine in alcoholic buffer, SGF and SIF, respectively. Pharmacodynamic studies indicated very significant (p?Conclusion: Oral delivery and bioavailability of artemether and lumefantrine could be improved using SRMS-based SLMs.     

Development of novel amisulpride-loaded solid self-nanoemulsifying tablets: preparation and pharmacokinetic evaluation in rabbits

Objective: The current investigation is focused on the formulation and in vivo evaluation of optimized solid self-nanoemulsifying drug delivery systems (S-SNEDDS) of amisulpride (AMS) for improving its oral dissolution and bioavailability.

Methods: Liquid SNEDDS (L-SNEDDS) composed of Capryol? 90 (oil), Cremophor^® RH40 (surfactant), and Transcutol^® HP (co-surfactant) were transformed to solid systems via physical adsorption onto magnesium aluminometasilicate (Neusilin US2). Micromeretic studies and solid-state characterization of formulated S-SNEDDS were carried out, followed by tableting, tablet evaluation, and pharmacokinetic studies in rabbits.

Results: Micromeretic properties and solid-state characterization proved satisfactory flow properties with AMS present in a completely amorphous state. Formulated self-nanoemulsifying tablets revealed significant improvement in AMS dissolution compared with either directly compressed or commercial AMS tablets. In vivo pharmacokinetic study in rabbits emphasized significant improvements in t_max, AUC_(0–12), and AUC_(0–∞) at p?<?.05 with 1.26-folds improvement in relative bioavailability from the optimized self-nanoemulsifying tablets compared with the commercial product.

Conclusions: S-SNEDDS can be a very useful approach for providing patient acceptable dosage forms with improved oral dissolution and biovailability.