Improved dissolution rate and bioavailability of fenofibrate pellets prepared by wet-milled-drug layering

Objective: The objective of this study is to investigate the wet-milled-drug layering process which could significantly improve the dissolution rate and oral bioavailability of fenofibrate pellets.

Methods: Fenofibrate was milled with HPMC-E5 to prepare a uniform suspension in the micrometer and nanometer range, and this suspension was then layered on to sugar spheres to form the pellets (F1, F2).

Results: The particle size was significantly reduced (from 1000 µm to 1–10 µm and 400?nm) but the fenofibrate in suspension retained its crystallinity from the results of DSC and PXRD investigations. The dissolution rate of F1-F2 and Antara® capsules was 55.47 %, 61.27 % and 58.43 %, respectively, in 0.01?mol/L SDS solution over 60?min. In addition, F1, F2, and Antara® capsules were given orally to 6 beagle dogs to determine the bioavailability. The C_max of F1, F2 (8.21?±?2.55 and 9.33?±?2.37 μg/mL)and the AUC_(0?t) of F1, F2 (152.46?±?78.89 and 172.17?±?67.58 μg/mL·h)were higher than those of Antara® (6.02?±?3.34 μg/mL and 89.82?±?46.46 μg/mL·h) and, F1, F2 reached their C_max earlier than Antara® (F1: 2.0?±?1.1?h; F2: 1.8?±?1.2?h; Antara®: 6.0?±?8.9?h).

Conclusion: These results show that the wet-milled-drug layering technique is a powerful method to improve the dissolution rate and the bioavailability of fenofibrate.     

Dual-purpose vardenafil hydrochloride/dapoxetine hydrochloride orodispersible tablets: in vitro formulation/evaluation,stability study and in vivo comparative pharmacokinetic study in healthy human subjects

Erectile dysfunction (ED) is the most important disorder after premature ejaculation for sexual activity in men. Vardenafil hydrochloride (VH) is an oral therapy for the treatment of erectile dysfunction. VH oral disintegrating tablets (ODTs) have been prepared by freeze drying technique to improve its dissolution profile and the overall clinical performance. Dapoxetine hydrochloride (DH) was added to the best three formulae of the prepared VH ODTs to treat premature ejaculation. All the ODTs formulae were evaluated for weight variation, friability, drug content, in vitro disintegration time, wetting time, and the dissolution study. Gelatin as a matrix former with N-methylpyrrolidone as a solubilizer in VH/DH ODTs improved the dissolution rate and extent of release of VH and DH with 100% of drug being dissolved after 15?min. In vivo study results from six healthy male volunteers showed shorter T_max of VH from VH/DH ODT of 0.583?±?0.129?h and shorter T_max of DH from VH/DH ODT of 0.625?±?0.137?h and showed AUC_0–12 of VH from VH/DH ODT of 39.234?±?10.932?ng/ml^?h¹ and AUC_0–12 of DH from VH/DH ODT of 531.681?±?129.544?ng/ml^?h¹, with relative bioavailability values of 100.9 and 85%, respectively, compared to (Levitra^®) and (Priligy^®).     

Preformulation characterization and in vivo absorption in beagle dogs of JFD,a novel anti-obesity drug for oral delivery

JFD (N-isoleucyl-4-methyl-1,1-cyclopropyl-1-(4-chlorine)phenyl-2-amylamine·HCl) is a novel investigational anti-obesity drug without obvious cardiotoxicity. The objective of this study was to characterize the key physicochemical properties of JFD, including solution-state characterization (ionization constant, partition coefficient, aqueous and pH-solubility profile), solid-state characterization (particle size, thermal analysis, crystallinity and hygroscopicity) and drug-excipient chemical compatibility. A supporting in vivo absorption study was also carried out in beagle dogs. JFD bulk powders are prismatic crystals with a low degree of crystallinity, particle sizes of which are within 2–10?μm. JFD is highly hygroscopic, easily deliquesces to an amorphous glass solid and changes subsequently to another crystal form under an elevated moisture/temperature condition. Similar physical instability was also observed in real-time CheqSol solubility assay. pK_a (7.49?±?0.01), log?P (5.10?±?0.02) and intrinsic solubility (S₀) (1.75?μg/ml) at 37?°C of JFD were obtained using potentiometric titration method. Based on these solution-state properties, JFD was estimated to be classified as BCS II, thus its dissolution rate may be an absorption-limiting step. Moreover, JFD was more chemically compatible with dibasic calcium phosphate, mannitol, hypromellose and colloidal silicon dioxide than with lactose and magnesium stearate. Further, JFD exhibited an acceptable pharmacokinetic profiling in beagle dogs and the pharmacokinetic parameters T_max, C_max, AUC_0–t and absolute bioavailability were 1.60?±?0.81?h, 0.78?±?0.47?μg/ml, 3.77?±?1.85?μg·h/ml and 52.30?±?19.39%, respectively. The preformulation characterization provides valuable information for further development of oral administration of JFD.     

Sustained-release of Cyclosporin A pellets: preparation,in vitro release,pharmacokinetic studies and in vitro–in vivo correlation in beagle dogs

The aim of this study was to develop Cyclosporin A (CsA) sustained-release pellets which could maintain CsA blood concentration within the therapeutic window throughout dosing interval and to investigate the in vitro–in vivo correlation (IVIVC) in beagle dogs. The CsA sustained-release pellets (CsA pellets) were prepared by a double coating method and characterized in vitro as well as in vivo. Consequently, the CsA pellets obtained were spherical in shape, with a desirable drug loading (7.18?±?0.17?g/100?g), good stability and showed a sustained-release effect. The C_max, T_max and AUC_0–24 of CsA pellets from the in vivo pharmacokinetics evaluation was 268.22?±?15.99?ng/ml, 6?±?0?h and 3205.00?±?149.55?ng·h/ml, respectively. Compared with Neoral®, CsA pellets significantly prolonged the duration of action, reduced the peak blood concentration and could maintain a relatively high concentration level till 24?h. The relative bioavailability of CsA pellets was 125.68?±?5.37% that of Neoral®. Moreover, there was a good correlation between the in vitro dissolution and in vivo absorption of the pellets. In conclusion, CsA pellets which could ensure a constant systemic blood concentration within the therapeutic window for 24?h were prepared successfully. Meanwhile, this formulation possessed a good IVIVC.     

Pharmacokinetic properties and bioequivalence of candesartan cilexetil in Korean healthy volunteers

Candesartan is a long-acting and selective nonpeptide AT₁ subtype angiotensin II receptor antagonist. The aim of this study was to compare the pharmacokinetics and to evaluate the bioequivalence of two candesartan cilexetil 16?mg formulations. Forty healthy volunteers were randomly assigned into two groups. After a single dose of 16?mg candesartan cilexetil oral administration, blood samples were collected at specific time intervals from 0–36?h. The plasma concentrations of candesartan cilexetil were determined by LC-MS/MS. The pharmacokinetic parameters such as AUC_last, AUC_inf and C_max were calculated and the 90% confidence intervals of the ratio (test/reference) pharmacokinetic parameters were obtained by analysis of variance on logarithmically transformed data. The mean for AUC_last in the reference and the test drug were 1530.1?±?434.6 and 1315.7?±?368.6 ng·h/mL. The mean for AUC_inf in the reference and the test drug were 1670.0?±?454.5 and 1441.2?±?397.8 ng·h/mL. The mean value for C_max in the reference and the test drug was 142.6?±?41.0 and 134.9?±?41.4?ng/mL. The 90% confidence intervals for the AUC_last, AUC_inf and C_max were in the range of log 0.81–log 0.91, log 0.81–log 0.91 and log 0.88–log1.01, respectively. No adverse events were reported by subjects or found on analysis of vital signs or laboratory tests. This single dose study found that the test and reference products met the regulatory criteria for bioequivalence in these health volunteers. Both formulations were safe and well tolerated in 16?mg of candesartan cilexetil hydrochloride.     

Sildenafil vaginal suppositories: preparation,characterization, in vitro and in vivo evaluation

Aim: The main objective was to investigate the in vitro release profile/kinetics, and in vivo plasma pharmacokinetics (PK) and organ biodistribution (BD) of the prepared sildenafil vaginal suppositories (SVS).

Methods: Suppositories containing 25?mg of sildenafil were prepared by the cream melting technique using Witepsol H-15 as a suppository base. The suppositories were characterized for weight variation, content uniformity, hardness, disintegration time and crystallinity change. The in vitro dissolution in pH 4.5, and in vivo plasma PK and organ BD of sildenafil from SVS in female Sprague Dawley rats, were also investigated.

Results: The mean weight variation, content uniformity, hardness and disintegration time of the prepared SVS were 1.127?±?0.020?g, 98.25?±?2.50%, 2.5?±?0.08?kg and 9?±?1.0?min, respectively. The release of sildenafil from the SVS was more than 90% at 30?min, with a release kinetic of Hixson--Crowell model and non-Fickian diffusion (n?=?0.464). The plasma PK study demonstrated a significantly lower C_max (～10 times) and AUC_0–24?h (～13 times) of sildenafil in plasma following intravaginal (IVG) administration of suppositories compared to oral (PO) administration of sildenafil solution. Nevertheless, the organ BD study showed a phenomenally higher C_max (～40 times) and AUC_0–24?h (～20 times) of sildenafil in uterus following IVG administration of suppositories than PO administration of sildenafil solution.

Conclusion: This study demonstrated enhanced sildenafil exposure in the uterus following IVG administration of SVS, which could be used to target the uterus for therapeutic benefits.     

Study of a novel disintegrable oleanolic acid-polyvinylpolypyrrolidone solid dispersion

Novel solid dispersions of oleanolic acid-polyvinylpolypyrrolidone (OLA-PVPP SDs) were designed and prepared to improve the apparent solubility of drug, as well as to improve the stability, fluidity and compressibility of SDs. Disintegrable OLA-PVPP SDs were then evaluated both in vitro and in vivo. DSC, XRD, IR and SEM analysis proved the formation of OLA-PVPP SD and its amorphous state. The results of fluidity study, moisture absorption test and stability test showed that OLA-PVPP SD with good fluidity and qualified stability was successfully obtained. Meanwhile excellent dissolution rate was achieved for in vitro studies; dissolution test showed that ～50–75% of OLA was dissolved from SDs within the first 10?min, which is about 10–15 times of free OLA. In vivo study indicated that the formation of solid dispersion could largely improve the absorption of OLA, resulting in a much shorter T_max (p?C_max (p?0→∞ of OLA-PVPP SDs (1:6) were 155.4?±?37.24?h·ng/mL compared to the 103.11?±?26.69?h·ng/mL and 94.92?±?13.05?h·ng/mL of OLA-PVPP physical mixture (1:6) and free OLA, respectively. These proved PVPP could be a promising carrier of solid dispersions and was industrially feasible alternative carrier in the manufacture of solid dispersions.     

Hyperoside nanocrystals for HBV treatment: process optimization,in vitro and in vivo evaluation

The aim of this study was to develop hyperoside (Hyp) nanocrystals to enhance its dissolution rate, oral bioavailability and anti-HBV activity. Hyp nanocrystals were prepared using high pressure homogenization technique followed by lyophilization. A Box–Behnken design approach was employed for process optimization. The physicochemical properties, pharmacokinetics and anti-HBV activity in vivo of Hyp nanocrystal prepared with the optimized formulation were systematically investigated. Hyp nanocrystals prepared with the optimized formulation was found to be rod shaped with particle size of 384?±?21?nm and PDI of 0.172?±?0.027. XRPD studies suggested slight crystalline change in drug. Dissolution rate obtained from Hyp nanocrystals were markedly higher than pure Hyp. The nanocrystals exhibited enhanced C_max (7.42?±?0.73 versus 3.80?±?0.66?mg/L) and AUC_0???t (193.61?±?16.30 versus 91.92?±?17.95?mg·h/L) with a 210.63% increase in relative bioavailability. Hyp nanocrystals exhibited significantly greater anti-HBV activity than Hyp. These results suggested that the developed nanocrystals formulation had a great potential as a viable approach to enhance the bioavailability of Hyp.     

Tracking the effect of microspheres size on the drug release from a microsphere/sucrose acetate isobutyrate (SAIB) hybrid depot in vitro and in vivo

The effects of particle size of microspheres on the drug release from a microsphere/sucrose acetate isobutyrate (SAIB) hybrid depot (m-SAIB) was investigated to develop a long-term sustained release drug delivery system with low burst release both in vitro and in vivo. A model drug, risperidone, was first encapsulated into PLGA microspheres with different particle sizes using conventional emulsification and membrane emulsification methods. The m-SAIB was prepared by dispersing the risperidone-microspheres in the SAIB depot. The drug release from m-SAIB was double controlled by the drug diffusion from the microspheres into SAIB matrix and the drug diffusion from the SAIB matrix into the medium. Large microspheres (18.95?±?18.88?µm) prepared by the conventional homogenization method exhibited porous interior structure, which contributed to the increased drug diffusion rate from microspheres into SAIB matrix. Consequently, m-SAIB containing such microspheres showed rapid initial drug release (C_max?=_?110.1?±54.2?ng/ml) and subsequent slow drug release (C_s(4–54d)=?2.7?±?0.8?ng/ml) in vivo. Small microspheres (5.91?±?2.24?µm) showed dense interior structure with a decreased drug diffusion rate from microspheres into SAIB matrix. The initial drug release from the corresponding m-SAIB was significantly decreased (C_max?=_?40.9?±?13.7?ng/ml), whereas the drug release rate from 4 to 54 d was increased (C_s(4–54d)=4.1?±?1.0?ng/ml). By further decreasing the size of microspheres to 3.38?±?0.70?µm, the drug diffusion surface area was increased, which subsequently increased the drug release from the m-SAIB. These results demonstrate that drug release from the m-SAIB can be tailored by varying the size of microspheres to reduce the in vivo burst release of SAIB system alone.     

Development and pharmacokinetic evaluation of alginate-pectin polymeric rafts forming tablets using box behnken design

Abstract

Raft is an emerging drug delivery system, which is suitable for controlled release drug delivery and targeting. The present study aimed to evaluate the physico-chemical properties of raft, in vitro release of pantoprazole sodium sesquihydrate and conduct bioavailability studies. Box behnken design was used with three independent and dependent variables. Independent variables were sodium alginate (X₁), pectin (X₂) and hydroxypropyl methyl cellulose K100M (X₃) while dependent variables were percentage drug release at 2 (Y₂), 4 (Y₄) and 8?h (Y₈). The developed rafts were evaluated by their physical and chemical properties. Fourier transform infrared spectroscopy and differential scanning calorimetry were used to study the chemical interaction and thermal behaviour of drug with polymers. Alginate and pectin contents of R9 formulation were 99.28% and 97.29%, respectively, and acid neutralization capacity was 8.0. R9 formulation showed longer duration of neutralization and nature of raft was absorbent. The raft of R9 formulation showed 98.94% release of PSS at 8?h in simulated gastric fluid. Fourier transform infrared spectroscopy showed no chemical interaction and differential scanning calorimetry indicated endothermic peaks at 250?°C for pantoprazole sodium sesquihydrate. t_max for the test and reference formulations were 8?±?2.345?h and 8?±?2.305?h, respectively. C_max of test and reference formulations were 46.026?±?0.567?µg/mL and 43.026?±?0.567?µg/mL, respectively. AUC_(0-t) of the test and reference formulations were 472.115?±?3.467?µg?×?h/mL and 456.105?±?2.017?µg?×?h/mL, respectively. Raft forming system successfully delivered the drug in controlled manner and improved the bioavailability of drugs.     

Development and uniform evaluation of ropinirole osmotic pump tablets with REQUIP XL both in vitro and in beagle dogs

REQUIP XL, prolonged release formulation of ropinirole hydrochloride (RH) in market, could release ropinirole constantly and showed satisfactory therapeutic effect and good compliance. REQUIP XL was composed of more than 10 kinds of excipients and prepared by Geomatrix technology, which was complex and laborious. The purpose of this study was to obtain a dosage form of RH with similar in vitro release profile and bioequivalence in vivo compared to REQUIP XL. Osmotic pump tablet combined with fast release phase was selected as the delivery system of RH and similar release curves were obtained in different media. The tablets were also administered to beagle dogs and the pharmacokinetic parameters were calculated using a non-compartmental model. C_max, t_max, mean residence time (MRT), and area under the curve from 0 to 24?h (AUC_0–24) were 3.97?±?0.53?ng/mL, 3.58?±?0.49?h, 8.29?±?0.93?h, and 35.20?±?8.11?ng/mL???h for ropinirole osmotic pump tablets (ROPT) and 4.15?±?1.07?ng/mL, 2.92?±?0.49?h, 7.84?±?1.09?h, and 34.34?±?10.06?ng/mL???h for REQUIP XL. The log-transformed mean C_max and AUC_0–24 of ROPT were about 92.15% and 102.49% relative to that of REQUIP XL, respectively. The 90% confidence intervals of C_max and AUC_0–24 for ROPT were 75.69–115.31% and 88.89–122.30%, respectively. So it could be concluded that ROPT was uniform with REQUIP XL both in vitro and in beagles and the release profiles of Geomatrix technology may be obtained by osmotic pump combined with fast release technology.     

PEGylated nanostructured lipid carriers (PEG–NLC) as a novel drug delivery system for biochanin A

With the aim to develop a lipid nanoparticle for biochanin A (BCA) by emulsion-evaporation and low temperature-solidification technique. The results revealed that BCA–PEG–NLC not only have small mean particle (148.5?±?2.88?nm) with narrow polydispersity index (PI) (0.153?±?0.01), encapsulation capacity (99.62?±?0.06%), payload (9.06?±?0.01%), zeta potential (?19.83?±?1.19?mV), but also slower release rate compared with BCA suspension over 48?h by the dialysis method (n=3). The crystallinity of lipid matrix within BCA–PEG–NLC was evaluated by differential scanning calorimetry (DSC) which verified the BCA successfully into the nanoparticles. Particularly, in pharmacokinetic, the BCA–PEG–NLC of C_max values and AUC (area under curve) was higher than BCA suspension (approximately 15.8 and 2.9 times, respectively), meanwhile, the mean residence time (MRT) was significantly longer. Furthermore, in vitro cytotoxicity BCA–PEG–NLC showed higher cytotoxicity against MCF-7 cell line compared with BCA suspension. This study suggested that PEG–NLC is a novel anti-cancer nanoparticle, which could provide attractive treatment for a wide variety of tumors and improved the oral bioavailability of poorly water-soluble drug.     

Comparison of antibacterial activity of Ag nanoparticles synthesized from leaf extract of Parthenium hystrophorus L in aqueous media and Gentamicin sulphate: in-vitro

Monodisperse silver (Ag) nanoparticles were synthesized by using Parthenium hystrophorus L leaf extract in aqueous media. The synthesized nanoparticles were characterized by using UV-vis spectrophotometer, X-ray diffracto-meter (XRD), transmission electron microscope (TEM), and dynamics light scattering (DLS). Size-dependent antibacterial activities of Ag nanoparticles were tested against Gram negative Pseudomonas aeruginosa and Gram positive Staphylococcus aureus. Ag nanoparticles having 20?±?2?nm size in diameter show maximum zone of inhibition (23?±?2.2?mm) in comparison to 40?nm and 70?nm diameter nanoparticles for Pseudomonas aeruginosa. The zone of inhibition against Staphylococcus aureus were 19?±?1.8?mm, 15?±?1.5?mm and 11?±?1?mm for 20?nm, 40?nm, and 70?nm, respectively. In addition, affect of concentration of 20?nm size Ag nanoparticles on Bacillus cereus, Escherichia coli, Pseudomonas aeruginosa and Staphylococcus aureus species were also reported and results were compared with 10?µg/ml dose of Gentamicin sulphate. The Parthenium hystrophorus L leaf extract capped 20?±?2?nm Ag nanoparticles (7.5?µg/ml) shows statistically significant antibacterial activity than Gentamicin sulphate (10?µg/ml) against Staphylococcus aureus.     

Preparation and evaluation of valsartan by a novel semi-solid self-microemulsifying delivery system using Gelucire 44/14

The aim of the present study was to develop a novel semi-solid self-microemulsifying drug delivery system (SMEDDS) using Gelucire^® 44/14 as oil with strong solid character to improve the oral bioavailability of poorly soluble drug valsartan. The solubility of valsartan in various excipients was determined, the pseudo-ternary phase diagram was constructed in order to screen the optimal excipients, and DSC analysis was performed to evaluate the melting point of SMEDDS. The optimal drug-loaded SMEDDS formulation was consisted of 30% Gelucire^® 44/14 (oil), 40% Solutol^® HS 15 (surfactant), and 30% Transcutol^® P (cosurfactant) (w/w) with 80?mg valsartan/g excipients. The average droplet sizes of the optimized blank and drug-loaded SMEDDS formulations were 26.20?±?1.43 and 33.34?±?2.15?nm, and the melting points of them were 35.6 and 36.8?°C, respectively. The in vitro dissolution rate of optimal semi-solid SMEDDS was increased compared with commercial capsules, resulting in the 2.72-fold and 2.97-fold enhancement of C_max and AUC_0–t after oral administration in rats, respectively. These results indicated that the novel semi-solid SMEDDS formulation could potentially improve the oral bioavailability of valsartan, and the semi-solid SMEDDS was a desirable system than the traditional liquid SMEDDS because it was convenient for preparation, storage and transportation due to semi-solid state at room temperature and melted state at body temperature.     

Three-ways crossover bioequivalence study of cephalexin in healthy Malay volunteers

Context: Although the general pharmacokinetics of cephalexin is quite established up-to-date, however, no population-based study on Cephalexin pharmacokinetics profile in Malay population has been reported yet in the literature.

Objective: The objective of this study was to investigate the pharmacokinetics and to compare the bioavailability of three cephalexin products, Ospexin® versus MPI Cephalexin® tablet and MPI Cephalexin® capsule, in healthy Malay ethnic male volunteers in Malaysia.

Material and method: A single dose, randomized, fasting, three-period, three-treatment, three-sequence crossover, open label bioequivalence study was conducted in 24 healthy Malay adult male volunteers, with 1 week washout period. The drug concentration in the sample was analyzed using high performance liquid chromatography.

Result: The mean (SD) pharmacokinetic parameter results of Ospexin® were C_max, 17.39 (4.15) μg/mL; AUC_0–6, 28.90 (5.70) µg/mL?*?h; AUC_0–∞, 30.07 (5.94) µg/mL?*?h; while, those of MPI Cephalexin® tablet were C_max, 18.29 (3.01) μg/mL; AUC_0–6, 30.02 (4.80) µg/mL?*?h; AUC0_0–∞, 31.33 (5.18) µg/mL?*?h and MPI Cephalexin® capsule were C_max, 18.25 (3.92) μg/mL; AUC_0–6, 30.04 (5.13) µg/mL?*?h; AUC_0–∞, 31.22 (5.29) µg/mL?*?h.

Conclusion: The 90% confidence intervals for the logarithmic transformed C_max, AUC_0–6 and AUC_0–∞, of Ospexin® versus MPI Cephalexin® tablet and Ospexin® versus MPI Cephalexin® capsule were between 0.80 and 1.25. Both C_max and AUC met the predetermined criteria for assuming bioequivalence. The pharmacokinetic profile of cephalexin in Malay population does not vary much from other world population.     

Characterization and evaluation of β-glucan formulations as injectable implants for protein and peptide delivery

Context: Injectable implants are biodegradable, syringeable formulations that are injected as liquids, but form a gel inside the body due to a change in pH, ions or temperature.

Objective: To investigate the effect of polymer concentration, pH, ions and temperature on the gel formation of β-glucan, a natural cell-wall polysaccharide derived from barley, with particular emphasis on two-phase system formation after addition of dextran or PEG.

Materials and methods: Oscillation viscometry was used to evaluate the gel character by measuring flow index (N), storage (G′) and loss (G″) moduli. Two-phase systems were further characterized for hardness and syringeability using a texture analyzer. Finally, in vitro release characteristics were determined using Franz diffusion cells.

Results: Oscillation viscometry revealed that only addition of dextran or PEG resulted in distinct gel formation. This was seen by a decrease in N after polymer addition. Moreover, hardness (in g) of the gels increased significantly (p?<?0.001) from 3.65?±?0.43 to 34.30?±?8.90 (dextran) and 805.80?±?5.30 (PEG) 24?h after polymer addition. In vitro release profiles showed significantly (p?<?0.05) reduced AUC_{0–8 h}, k and percentage of drug released from two-phase systems compared to β-glucan dispersions, with the PEG system resulting in the lowest amount released over 8?h (15.1?±?1.6%).

Discussion: The unfavorable mixing enthalpy and higher water affinity of PEG resulted in the formation of a dense β-glucan gel.

Conclusion: 1.5% (w/w) β-glucan combined with PEG at a ratio of 1:3 seemed to be the most promising injectable formulation with respect to fastest gel formation, increased hardness and sustained release.     

A simple and sensitive method for determination of vitamins D3 and K1 in rat plasma: application for an in vivo pharmacokinetic study

Purpose: To develop and to validate a simple but sensitive method for determination of vitamins D₃ and K₁ in rat plasma.

Methods: The sample treatment included protein precipitation by cold acetonitrile, evaporation, reconstitution with methanol and filtration. The chromatography conditions included Xterra RP18 3.5?µm 4.6?×?100?mm column at ambient temperature and mobile phase consisting of methanol/water (93/7, v/v) at 0.5?mL/min flow rate. Vitamin D₃ and probucol were detected at 265?nm and vitamin K₁ at 239?nm. Rats were administered intravenously by 0.1?mg/kg of vitamin D₃ or K₁ and the blood samples were withdrawn pre-administration and at pre-determined time points post-administration. The pharmacokinetic analysis was performed using a non-compartmental approach.

Results: The calibration curves in rat plasma were linear up to 5000?ng/mL for both vitamins. The limit of quantification (LOQ) was 20?ng/mL for vitamin D₃ and 40?ng/mL for K₁. Inter- and intra-day precision and accuracy were below 15%. The pharmacokinetic parameters of vitamin D₃ following intravenous administration were: AUC_0?∞?=?11323?±?1081?h?×?ng/mL, V_d?=?218?±?80?mL/kg, CL?=?8.9?±?0.8?mL/h/kg, t_1/2?=?16.8?±?5?h; and of vitamin K₁: AUC_0?∞?=?2495?±?297?h?×?ng/mL, V_d?=?60?±24?mL/kg, CL?=?40.5?±?5.1?mL/h/kg, t_1/2?=?1.1?±0.5?h.

Conclusion: The developed HPLC–UV assay is a simple and sensitive method for the determination of vitamins D₃ and K₁ in rat plasma. A higher dose of vitamin K₁ should be used in future studies for accurate estimation of pharmacokinetic parameters. The data show the suitability of the assay for pharmacokinetic studies in rats.     

Preparation of fenofibrate immediate-release tablets involving wet grinding for improved bioavailability

Objective: The purpose of this study was to investigate the dissolution and oral bioavailability of an immediate-release tablet involving wet grinding of a poorly water-soluble drug, fenofibrate. Methods: The milled suspension was prepared using a Basket Dispersing Mill in the presence of a hydrophilic polymer solution and then granulated with common excipients, and compressed into an immediate-release tablet with blank microcrystalline cellulose granules. Results: Compared with unmilled tablets (56% within 30 minutes), the dissolution of wet-milled tablets (about 98% in 30 minutes) was markedly enhanced. No significant decrease in the dissolution rate (96% in 30 minutes) of the wet-milled tablet was observed after 3 months under 40°C and 75% relative humidity storage. In addition, the oral bioavailability of the wet-milled tablets (test) and Lipanthyl® supra-bioavailability tablets (reference) was determined in beagle dogs after a single dose (160 mg fenofibrate) in a randomized crossover, own-control study. The results suggested that both the area under the plasma concentration–time curve (AUC_(0?t) = 46.83 ± 11.09 μg/mL h) and the mean peak concentration of the test (C_max = 4.63 ± 1.71 μg/mL) were higher than the reference (AUC_(0?t) = 35.12 ± 10.97 μg/mL h, C_max = 2.11 ± 0.08 μg/mL). The relative bioavailability of the wet-milled tablet was approximately 1.3-fold higher. Furthermore, the apparent rate of absorption of fenofibrate from the wet-milled tablet (T_max = 2.63 hours) was faster than that from Lipanthyl® (T_max = 3.75 hours). Conclusion: These results indicated that the dissolution and the bioavailability of fenofibrate were significantly enhanced by wet-grinding process. So, this shows that wet grinding is a powerful technique to improve the bioavailability for poorly water-soluble drugs, especially for Biopharmaceutics Classification System Class II compounds.     

Pharmacokinetics and efficiency of brain targeting of ginsenosides Rg1 and Rb1 given as Nao-Qing microemulsion

Nao-Qing solution has been shown to be clinically effective in the treatment of acute ischemic stroke (AIS). The purpose of this study was to improve the pharmacokinetics and brain uptake of Nao-Qing, administered as an oil-in-water microemulsion. Sprague–Dawley (SD) rats were given Nao-Qing microemulsion by intranasal or intragastric routes. Samples of blood, brain, heart, liver, lung and kidney were collected at pre-determined time intervals, and the contents of ginsenosides Rg1 and Rb1 (active ingredients of the Nao-Qing microemulsion) were analyzed by high-performance liquid chromatography (HPLC). The results showed that contents of ginsenosides Rg1 and Rb1 in Nao-Qing microemulsion was 8475.13?±?54.61?μg/ml and 6633.42?±?527.27?μg/ml, respectively, and that the particle size, pH and viscosity of the microemulsion were 19.9?±?5.07?nm, 6.1 and 3.056?×?10^?3?Pas, respectively. Absorption of ginsenoside Rg1 was higher than that of ginsenoside Rb1, which was barely detectable after intragastric administration; furthermore, the concentration of ginsenoside Rg1 in blood and other tissues at each time point was lower for intragastric than for intranasal administration. Compared with intragastric administration, intranasal administration resulted in a shorter t_max (0.08 versus 1?h), a higher C_max (16.65 versus 11.29?μg/ml), and a higher area under the concentration–time curve (AUC) (592.91 versus 101.70?μg?h/ml) in the brain. The relative rates of uptake (R_e) and the ratio of peak concentration (C_e) in the brain were 126.31% and 147.48% for ginsenoside Rg1, respectively. These data illustrate that intranasal administration can promote the absorption of drugs in Nao-Qing microemulsion and achieve fast effect.