Development and evaluation of a novel drug delivery: Soluplus®/TPGS mixed micelles loaded with piperine in vitro and in vivo

Background: Although piperine can inhibit cells of tumors, the poor water solubility restricted its clinical application. This paper aimed to develop mixed micelles based on Soluplus^® and D-α-tocopherol polyethylene glycol succinate (TPGS) to improve the aqueous solubility and anti-cancer effect.

Methods: Piperine-loaded mixed micelles were prepared using a thin-film hydration method, and their physicochemical properties were characterized. The cellular uptake of the micelles was confirmed by confocal laser scanning microscopy in A549 lung cancer cells and HepG₂ liver cancer cells. In addition, cytotoxicity of the piperine mixed micelles was studied in A549 lung cancer cells and HepG₂ liver cancer cells. Free piperine or piperine-loaded Soluplus^®/TPGS mixed micelles were administered at an equivalent dose of piperine at 3.2?mg/kg via a single intravenous injection in the tail vain for the pharmacokinetic study in vivo.

Results: The diameter of piperine-loaded Soluplus^®/TPGS (4:1) mixed micelles was about 61.9?nm and the zeta potential –1.16?±?1.06?mV with 90.9% of drug encapsulation efficiency and 4.67% of drug-loading efficiency. Differential scanning calorimetry (DSC) studies confirmed that piperine is encapsulated by the Soluplus^®/TPGS. The release results in vitro showed that the piperine-loaded Soluplus^®/TPGS mixed micelles presented sustained release behavior compared to the free piperine. The mixed micelles exhibited better antitumor efficacy compared to free piperine and physical mixture against in A549 and HepG₂ cells by MTT assay. The pharmacokinetic study revealed that the AUC of piperine-loaded mixed micelles was 2.56 times higher than that of piperine and the MRT for piperine-loaded mixed micelles was 1.2-fold higher than piperine (p?Conclusion: The results of the study suggested that the piperine-loaded mixed micelles developed might be a potential nano-drug delivery system for cancer chemotherapy. These results demonstrated that piperine-loaded Soluplus^®/TPGS mixed micelles are an effective strategy to deliver piperine for cancer therapy.     

Preparation and evaluation of curcumin-loaded self-assembled micelles

Objective: Curcumin being used to treat various chronic diseases while its poor bioavailability issue limited its wide clinical application as a therapeutic agent. The aim of this work was to prepare curcumin-loaded self-assembled micelles using soluplus and solutol^®HS15 (SSCMs) to enhance curcumin’s solubility and thus oral bioavailability.

Methods: Optimum formulation was investigated and the optimized ratio of drugs and excipients was obtained and the SSCMs were prepared via ethanol solvent evaporation method. The optimal SSCMs were characterized by transmission electron microscopy, drug content analysis including loading efficiency (LE%) and entrapment efficiency (EE%), and the cumulative amount of curcumin released from the micelles were all calculated using HPLC method. The in vitro cytotoxicity and the permeability of SSCMs were measured by Caco-2 cell monolayers and the oral bioavailability was evaluated by SD rats.

Key findings: The solubility of curcumin in self-assembled micelles was dramatically increased by 4200 times as compared to free curcumin. Caco-2 cells transport experiment exhibited that while soluplus and solutol^®HS15 were self-assembled into micelles, it could not only promote the permeability of curcumin across membrane for better absorption, but also could restrain the curcumin pumped outside due to the role of P-gp efflux mechanism of soluplus and solutol^®HS15. Furthermore, the prepared SSCMs formulation was almost nontoxic and had safety performance on Caco-2 cells model. Moreover, curcumin’s oral bioavailability of SSCMs formulation in SD rats had doubled than that of free curcumin.

Conclusions: The prepared SSCMs were characterized by PS, PDI, LE%, EE% data analysis. After the soluplus and solutol^®HS15 were self assembled into micelles, both the solubility and membrane permeability of curcumin were evaluated to have been enhanced, as well as the effect of efflux pump of curcumin was inhibited, hence to promote oral absorption and generate an increased bioavailability.     

Application of hot melt extrusion for improving bioavailability of artemisinin a thermolabile drug

Hot melt extrusion has been used to produce a solid dispersion of the thermolabile drug artemisinin. Formulation and process conditions were optimized prior to evaluation of dissolution and biopharmaceutical performance. Soluplus^®, a low T_g amphiphilic polymer especially designed for solid dispersions enabled melt extrusion at 110?°C although some drug-polymer incompatibility was observed. Addition of 5% citric acid as a pH modifier was found to suppress the degradation. The area under plasma concentration time curve (AUC_0–24h) and peak plasma concentration (C_max) were four times higher for the modified solid dispersion compared to that of pure artemisinin.     

Preparation and evaluation of self-assembly Soluplus®-sodium cholate-phospholipid ternary mixed micelles of docetaxel

Abstract

Ternary mixed micelles constituted of Soluplus^®, sodium cholate, and phospholipid were prepared as nano-delivery system of the anticancer drug, docetaxel. The formulation of docetaxel-loaded ternary mixed micelles (DTX-TMMs) with an optimized composition (Soluplus^®/sodium cholate/phospholipid= 3:2:1 by weight) were obtained. The main particle size of DTX-TMMs was 76.36?±?2.45?nm, polydispersity index (PDI) was 0.138?±?0.039, and the zeta potential was ?8.46?±?0.55?mv. The encapsulation efficiency was 94.24?±?4.30% and the drug loading was 1.25%. The critical micelle concentration value was used to assess the ability of carrier materials to form micelles. The results indicated that the addition of Soluplus^® to sodium cholate-phospholipid mixed micelles could reduce the critical micelle concentration and improve the stability. In vitro release studies demonstrated that compared with DTX-Injection group, the DTX-TMMs presented a controlled release property of drugs. In vivo pharmacodynamics results suggested that DTX-TMMs had the most effective inhibitory effect on tumor proliferation and had good biosafety. In addition, the relative bioavailability of mixed micelles was increased by 1.36 times compared with the DTX-Injection in vivo pharmacokinetic study indicated that a better therapeutic effect could be achieved. In summary, the ternary mixed micelles prepared in this study are considered to be promising anticancer drug delivery systems.     

Innovation of novel ‘Tab in Tab’ system for release modulation of milnacipran HCl: optimization,formulation and in vitro investigations

The study was aimed toward development of modified release oral drug delivery system for highly water soluble drug, Milnacipran HCl (MH). Novel Tablet in Tablet system (TITs) comprising immediate and extended release dose of MH in different parts was fabricated. The outer shell was composed of admixture of MH, lactose and novel herbal disintegrant obtained from seeds of Lepidium sativum. In the inner core, MH was matrixed with blend of hydrophilic (Benecel^®) and hydrophobic (Compritol^®) polymers. 3² full factorial design and an artificial neuron network (ANN) were employed for correlating effect of independent variables on dependent variables. The TITs were characterized for pharmacopoeial specifications, in vitro drug release, SEM, drug release kinetics and FTIR study. The release pattern of MH from batch A10 containing 25.17% w/w Benecel^® and 8.21% w/w of Compritol^® exhibited drug release pattern close proximal to the ideal theoretical profile (t_50% = 5.92?h, t_75% = 11.9?h, t_90% = 18.11 h). The phenomenon of drug release was further explained by concept of percolation and the role of Benecel^® and Compritol^® in drug release retardation was studied. The normalized error obtained from ANN was less, compared with the multiple regression analysis, and exhibits the higher accuracy in prediction. The results of short-term stability study revealed stable chataracteristics of TITs. SEM study of TITs at different dissolution time points confirmed both diffusion and erosion mechanisms to be operative during drug release from the batch A10. Novel TITs can be a succesful once a day delivery system for highly water soluble drugs.     

Nanostructured lipid carriers loaded with simvastatin: effect of PEG/glycerides on characterization,stability, cellular uptake efficiency and in vitro cytotoxicity

Objective: The aim of this study is to evaluate the use of PEG/glycerides of different HLB; oleoyl macrogol-6-glycerides (Labrafil^® M 1944 CS) and caprylocaproylmacrogol-8-glycerides (Labrasol^®), compared to Labrafac lipophile^® as PEG-free glyceride in the preparation of nanostructured lipid carriers (NLCs). PEG/glycerides are suggested to perform a dual function; as the oily component, and as the PEG-containing substrate required for producing the PEGylated carriers without physical or chemical synthesis.

Methods: Lipid nanocarriers were loaded with simvastatin (SV) as a promising anticancer drug. An optimization study of NLC fabrication variables was first conducted. The effect of lyophilization was investigated using cryoprotectants of various types and concentrations. The prepared NLCs were characterized in terms of particle size (PS), size distribution (PDI), zeta potential (ZP), drug entrapment, in vitro drug release, morphology and drug–excipient interactions. The influence of glycerides?±?PEG on the cytotoxicity of SV was evaluated on MCF-7 breast cancer cells, in addition to the cellular uptake of fluorescent blank NLCs.

Results: The alteration between different oil types had a significant impact on PS, ZP and drug release. Both sucrose and trehalose showed the lowest increase in PS and PDI of the reconstituted lyophilized NLCs. The in vitro cytotoxicity and cellular uptake studies indicated that SV showed the highest antitumor effect on MCF-7 cancer cells when loaded into Labrasol^® NLCs demonstrating a high cellular uptake as well.

Conclusion: The study confirms the applicability of PEG/glycerides in the development of NLCs. Encapsulating SV in Labrasol^®-containing NLC could enhance the antitumor effect of the drug.     

Improved oral bioavailability and therapeutic efficacy of dabigatran etexilate via Soluplus-TPGS binary mixed micelles system

The clinical use of dabigatran etexilate (DABE) is limited by its poor absorption and relatively low bioavailability. Our study aimed to explore the potential of a mixed micelle system composed of Soluplus^® and D-alpha tocopheryl polyethylene glycol 1000 succinate (TPGS) to improve the oral absorption and bioavailability of DBAE. DBAE was first encapsulated into Soluplus/TPGS mixed micelles by a simple thin film hydration method. The DBAE loaded micelles displayed an average size distribution of around 83.13?nm. The cellular uptake of DBAE loaded micelles in Caco-2 cell monolayer was significantly enhanced by 2–2.6 fold over time as compared with DBAE suspension. Both lipid raft/caveolae and macropinocytosis-mediated the cell uptake of DBAE loaded micelles through P-glycoprotein (P-gp)-independent pathway. Compared with the DBAE suspension, the intestinal absorption of DBAE from DBAE mixed micelles in rats was significantly improved by 8 and 5-fold in ileum at 2?h and 4?h, respectively. Moreover, DBAE mixed micelles were absorbed into systemic circulation via both portal vein and lymphatic pathway. The oral bioavailability of DBAE mixed micelles in rats was 3.37 fold higher than that of DBAE suspension. DBAE mixed micelles exhibited a comparable anti-thrombolytic activity with a thrombosis inhibition rate of 63.18% compared with DBAE suspension in vivo. Thus, our study provides a promising drug delivery system to enhance the oral bioavailability and therapeutic efficacy of DBAE.     

Facile development,characterization, and optimization of new metformin-loaded nanocarrier system for efficient colon cancer adjunct therapy

Purpose: Metformin hydrochloride (MF) repurposing as adjuvant anticancer therapy for colorectal cancer (CRC) proved effective. Several studies attempted to develop MF-loaded nanoparticles (NPs), however the entrapment efficiency (EE%) was poor. Thus, the present study aimed at the facile development of a new series of chitosan (CS)-based semi-interpenetrating network (semi-IPN) NPs incorporating Pluronic^® nanomicelles as nanocarriers for enhanced entrapment and sustained release of MF for efficient treatment of CRC.

Methods: The NPs were prepared by ionic gelation and subsequently characterized using FTIR, DSC, TEM, and DLS. A full factorial design was also adopted to study the effect of various formulation variables on EE%, particle size, and zeta-potential of NPs.

Results: NPs had a spherical shape and a mean particle size ranging between 135 and 220?nm. FTIR and DSC studies results were indicative of successful ionic gelation with the drug being dispersed in its amorphous form within CS-Pluronic^® matrix. Maximum EE% reaching 57.00?±?12.90% was achieved using Pluronic^®-123 based NPs. NPs exhibited a sustained release profile over 48?h. The MF-loaded NPs sensitized RKO CRC cells relative to drug alone.

Conclusion: The reported results highlighted the novel utility of the developed NPs in the arena of colon cancer treatment.     

Design and development of a self-microemulsifying drug delivery system of olmesartan medoxomil for enhanced bioavailability

Olmesartan medoxomil (OM) is a hydrophobic antihypertensive drug with low bioavailability (26%) and is known to have adverse effects such as celiac disease and enteropathy. The purpose of this study was to develop SMEDDS to increase bioavailability and decrease potential side effects of OM. Hydrophilic lipophilic balance was calculated by testing solubility of OM in different oils, surfactants, and cosurfactants to obtain the most suitable combination of SMEDDS. Pseudoternary phase diagram was used to select the better oil/water formulation of SMEDDS. After a test for 3-month stability, dissolution tests and parallel artificial membrane permeability assay (PAMPA) were conducted to investigate drug solubility and permeability. Biodistribution of fluorescent marked SMEDDS was observed by using in vivo imaging system. The pharmacodynamics of the drug were determined by measuring blood pressure from tails of rats. At the end of the experiment, intestines were examined for adverse effects of OM. Compared with tablet formulation according to the dissolution study, SMEDDS formulation showed 1.67 times improvement in solubility of OM. PAMPA studies suggested a much faster permeability rate for OM SMEDDS compared to the suspension form. Labeled SMEDDS gave 3.96 times stronger fluorescent emission than control dye administered mice in in vivo imaging system (IVIS^®) studies, indicating an increased bioavailability. Treating effect of SMEDDS was 3.1 times more efficient compared to suspension in hypertensive rats. It caused neither celiac-like enteropathy nor diarrhea, during 21-day noninvasive blood pressure system (NIBP) assay. Our results suggest that SMEEDS formulation improves dissolution and oral bioavailability of OM while reducing its adverse effects.     

Effect of polyvinyl caprolactam–polyvinyl acetate–polyethylene glycol graft copolymer on bioadhesion and release rate property of eplerenone pellets

Abstract

The present study involved the design and development of oral bioadhesive pellets of eplerenone. A solid dispersion of eplerenone was developed with a hydrophilic carrier, polyvinyl caprolactam–polyvinyl acetate–polyethylene glycol graft copolymer (Soluplus^®). Bioadhesive pellets were prepared from this solid dispersion using a combination of HPMC K4M and Carbopol 934P. Both the solid dispersion and the pellets were evaluated for various physicochemical properties such as solubility, entrapment efficiency, drug content, surface morphology, mucoadhesion and swelling behavior. Analysis carried out using FT-IR, DSC and XRD found no interaction between the eplerenone and excipients. The solid dispersion had irregular-shaped smooth-surfaced particles of diameter 265?±?105.5?μm. In TEM analysis, eplerenone particles of size 79–120?nm were found. The solubility and dissolution of eplerenone in the Soluplus^®-based solid dispersion were 5.26 and 2.50 times greater, respectively. Investigation of the swelling behavior of the pellets showed that the thickness of the gel layer increased continuously over the duration of the study. Moreover, a correlation was observed between the thickness and strength of the gel layer and the percentage release. The mechanism of drug release was found to be non-Fickian (anomalous), with the release kinetics approaching first-order kinetics. The bioavailability of the eplerenone bioadhesive pellet formulation was studied using Wistar rats and was found to be improved. An in vivo mucoadhesion study showed that the pellets are retained for 24?h in rabbits. It was concluded that Soluplus^® had a positive effect on the solubility and dissolution of pellets without affecting the bioadhesion.     

Enhanced oral delivery and anti-gastroesophageal reflux activity of curcumin by binary mixed micelles

The aim of this study was to improve the solubility, oral bioavailability, and anti-gastroesophageal reflux activity of curcumin (CM) by preparing two CM-loaded, novel, binary mixed micelles (CM-M). The two CM-M were prepared by ethanol thin-film hydration method. One (CM-T) was prepared using D-alpha-tocopheryl polyethylene glycol 1000 succinate and Solutol^®HS15, and the other (CM-F) was prepared using Pluronic^®F127 and Solutol^®HS15. The entrapment efficiency and drug loading of CM-T were 83.61?±?0.54% and 2.20?±?0.65%, respectively, which were lower than those of CM-F (88.66?±?0.12% and 1.47?±?0.26%, respectively). TEM results demonstrated that CM-T and CM-F were homogeneous and spherical. The permeability of CM delivered via CM-T and CM-F was enhanced across a Caco-2 cell monolayer, and CM-T and CM-F showed a 5.24- and 4.76-fold increase in relative oral bioavailability, respectively compared with free CM. In addition, the in vivo anti-gastroesophageal reflux study showed that CM-T and CM-F achieved higher anti-gastroesophageal reflux efficacy compared with free CM. Collectively, these findings were indicative of an oral micelle formulation of CM with increased solubility, oral bioavailability, and anti-gastroesophageal reflux activity.     

Improved solubility and oral bioavailability of apigenin via Soluplus/Pluronic F127 binary mixed micelles system

The aim of this study was to develop a novel mix micelles system composing of two biocompatible copolymers of Soluplus^® and Pluronic F127 to improve the solubility, oral bioavailability of insoluble drug apigenin (AP) as model drug. The AP-loaded mixed micelles (AP-M) were prepared by ethanol thin-film hydration method. The formed optimal formulation of AP-M were provided with small size (178.5?nm) and spherical shape at ratio of 4:1 (Soluplus^®:Pluronic F127), as well as increasing solubility of to 5.61?mg/mL in water which was about 3442-fold compared to that of free AP. The entrapment efficiency and drug loading of AP-M were 95.72 and 5.32%, respectively, and a sustained release of AP-M was obtained as in vitro release study indicated. Transcellular transport study showed that the cell uptake of AP was increased in Caco-2 cell transport models. The oral bioavailability of AP-M was 4.03-fold of free AP in SD rats, indicating the mixed micelles of Soluplus^® and Pluronic F127 is an industrially feasible drug delivery system to promote insoluble drug oral absorption in the gastrointestinal tract.     

An overview of the emerging warm mix asphalt technology

The asphalt industry is constantly attempting to reduce its emissions as concerns are growing on global warming. This is done by decreasing the mixing and compaction temperatures of asphalt mixtures without affecting the properties of the mix which is possible through numerous available technologies in the industry. The production of asphalt mix is done by warm mix asphalt (WMA) technology at considerably lower temperatures (120°C or lower). Less energy consumption, lower mixing and compaction temperatures, early site opening, reduced ageing, fewer emissions, cool weather paving, better workability and, finally, an extended paving window could be mentioned as some of the benefits obtained by using the WMA. This paper presents the WMA techniques and technologies such as foaming techniques, wax and chemical additives techniques. Additionally, the performance of WMA popular technologies such as Sasobit^®, WAM^®-Foam, Evotherm^®, Low energy asphalt, Rediset^® WMX and REVIX? are fully described.     

Nifedipine in semi-solid formulations for topical use in peripheral vascular disease: preparation,characterization, and permeation assay

Nifedipine (NFD) has been used for the treatment of cutaneous lesions caused by peripheral vascular disease and diabetic ulcers. NFD was formulated at 8% in three semi-solid formulations: Polaxamer 407 Lecithin Organogel (PLO), PLO plus Transcutol^®, and an oil-in-water (o/w) emulsion. In vitro release and permeation tests were carried out using a synthetic (cellulose acetate) or natural membrane (pig ear skin), respectively, mounted in a Franz-type diffusion cell at 37°C in a constant water bath. As a receptor solution, isotonic phosphate buffer at pH 7.4 was used. All samples were analyzed by high-performance liquid chromatography by employing a previously validated method. The drug flow values were 6.126?±?0.288, 4.030?±?0.081, and 6.660?±?0.254 μg/cm²/h for PLO, PLO plus Transcutol^®, and o/w emulsion, respectively. The three formulations did not show significant differences in drug flow, considering p > 0.05. Furthermore, their penetration profiles in both the epidermis and dermis were statistically different. Thus, the incorporation of NFD in PLO, PLO plus Transcutol^®, and o/w emulsion changed the drug thermodynamic activity, as expected. In addition, Transcutol^® increased the solubility of NFD in the formulation and promoted its penetration in both the epidermis and dermis.     

Evaluation of the performance of warm mix asphalt in Washington state

Warm mix asphalt (WMA) is a relatively new and emerging technology for the asphalt industry. It offers potential construction and environmental advantages over traditional hot mix asphalt (HMA). However, WMA must perform at least as well as HMA before it can be used extensively. This study evaluates the performance of WMA mixtures and their corresponding HMA control mixtures obtained from various field sites in the state of Washington. Four WMA technologies are examined, including Sasobit^® and three water-foaming technologies, Gencor^®, Aquablack? and ALmix Water Injection. Performance tests are conducted on the field cores to evaluate and compare the rutting, moisture susceptibility, fatigue and thermal resistance of WMA and HMA, respectively. Also, the extracted binders from the field cores are evaluated. In addition, the early-age field performance of WMA and HMA control pavements are compared.     

Formulation and evaluation of diclofenac potassium fast-disintegrating tablets and their clinical application in migraine patients

The aim of this study was to prepare fast-disintegrating tablets (FDTs) of diclofenac potassium with sufficient integrity as well as a pleasant taste, using two different fillers and binders: Tablettose 70® and Di-Pac^®. Tablets were made with direct compression method. Tablet properties such as porosity, hardness, and disintegration time were determined. Diclofenac potassium determinations were carried out using a validated spectrophotometric method for the analysis of drug. Furthermore, in vivo experiments were carried out to compare the analgesic effect and the time to relieve migraine headache between the commercial tablets and FDTs of diclofenac potassium against placebo. Results showed that FDTs of diclofenac potassium with durable structure and desirable taste can be prepared using both fillers and binders but tablets prepared with Di-Pac had a better taste so the tablet formulation containing Di-Pac was chosen for in vivo experiments. Placebo controlled in vivo trial demonstrated that 50 mg diclofenac potassium, administered as a single dose of FDTs or commercial tablets, was effective in relieving the pain and both of them were superior to placebo.     

Optimization of hot melt extrusion parameters for sphericity and hardness of polymeric face-cut pellets

The aim of this study was to formulate face-cut, melt-extruded pellets, and to optimize hot melt process parameters to obtain maximized sphericity and hardness by utilizing Soluplus^® as a polymeric carrier and carbamazepine (CBZ) as a model drug. Thermal gravimetric analysis (TGA) was used to detect thermal stability of CBZ. The Box–Behnken design for response surface methodology was developed using three factors, processing temperature (?°C), feeding rate (%), and screw speed (rpm), which resulted in 17 experimental runs. The influence of these factors on pellet sphericity and mechanical characteristics was assessed and evaluated for each experimental run. Pellets with optimal sphericity and mechanical properties were chosen for further characterization. This included differential scanning calorimetry, drug release, hardness friability index (HFI), flowability, bulk density, tapped density, Carr’s index, and fourier transform infrared radiation (FTIR) spectroscopy. TGA data showed no drug degradation upon heating to 190?°C. Hot melt extrusion processing conditions were found to have a significant effect on the pellet shape and hardness profile. Pellets with maximum sphericity and hardness exhibited no crystalline peak after extrusion. The rate of drug release was affected mainly by pellet size, where smaller pellets released the drug faster. All optimized formulations were found to be of superior hardness and not friable. The flow properties of optimized pellets were excellent with high bulk and tapped density.     

Development of orally disintegrating tablets comprising controlled-release multiparticulate beads

Melperone is an atypical antipsychotic agent that has shown a wide spectrum of neuroleptic properties, particularly effective in the treatment of senile dementia and Parkinson’s-associated psychosis, and is marketed in Europe as an immediate-release (IR) tablet and syrup. An orally disintegrating tablet (ODT) dosage form would be advantageous for patients who experience difficulty in swallowing large tablets or capsules or those who experience dysphagia. Controlled-release (CR) capsule and ODT formulations containing melperone HCl were developed with target in vitro release profiles suitable for a once-daily dosing regimen. Both dosage forms allow for the convenient production of dose-proportional multiple strengths. Two ODT formulations exhibiting fast and medium release profiles and one medium release profile capsule formulation (each 50?mg) were tested in vivo using IR syrup as the reference. The two medium release formulations were shown to be bioequivalent to each other and are suitable for once-daily dosing. Based on the analytical and organoleptic test results, as well as the blend uniformity and in-process compression data at various compression forces using coated beads produced at one-tenth (1/10) commercial scale, both formulations in the form of CR capsules and CR ODTs have shown suitability for progression into further clinical development.     

Targeting the transitions: applying stage-gate® thinking in strategic environmental assessment

Strategic environmental assessment (SEA) practitioners have a tendency to emphasize assessment phases over the linkages between the phases. Explicitly addressing the transitions between stages could add rigour to SEA processes and make them more structurally robust. There is a considerable body of research on project management practices used by corporations during new product development (NPD). The stage-gate^® model is presented as an example of a successful and innovative NPD approach that is frequently used by various industries, and which addresses the links between assessment phases. Stage-gate theory treats connections between project stages as gates which must be passed. The philosophy behind the stage-gate model is explored as a macro-process that could support current practices in SEA and other types of impact assessment. The stages and gates designed for a proposed Nova Scotia SEA framework are presented to show how stage-gate thinking can be adapted for use in SEA processes. The paper concludes that SEA processes could become more efficient and effective by integrating a philosophy of gated assessments.     

Eudragit® RS PO/RL PO as rate-controlling matrix-formers via roller compaction: Influence of formulation and process variables on functional attributes of granules and tablets

The influence of plasticizer level, roll pressure and sintering temperature was investigated on the granule properties, tablet breaking force and theophylline release from tablets. Nine formulations using theophylline as a model drug, Eudragit^® RL PO, Eudragit^® RS PO, or both as a matrix former and triethyl citrate (TEC) as a plasticizer were prepared. The formulations were roller compacted and the granules obtained were evaluated for particle size distribution and flowability. These granules were compacted into tablets at a compression force of 7?kN. The tablets were thermally treated at different temperatures (50 and 75°C) for 5?h and were evaluated for breaking force and dissolution. Increase in roll pressure and TEC levels resulted in a progressive increase in the mean particle size of the granules. The flowability of the granules also improved with increasing roll pressures and TEC levels. Tablet breaking force increased with an increase in TEC levels and sintering temperatures. But these effects were significant only at the highest level of plasticizer and sintering temperature respectively. For the tablets containing Eudragit^® RS PO, theophylline release decreased proportionately with increase in TEC levels and sintering temperatures. Tablets containing either Eudragit^® RL PO or a mixture of RS PO and RL PO failed to impart an extended-release property to the tablets at the studied variables i.e. roll pressure, TEC levels and sintering temperature. It was clearly demonstrated that with suitable optimization of these parameters, the release-rate of a water soluble drug from the matrix tablets prepared via roller compaction can be finely controlled.