Amphotericin B-loaded solid lipid nanoparticles (SLNs) and nanostructured lipid carrier (NLCs): effect of drug loading and biopharmaceutical characterizations

The aim of this study was to further investigate the effect of drug loading, drug entrapment efficiency, the drug release profiles and biopharmaceutical point of views of amphotericin B (AmB) lipid formulations, that is, degree of aggregation by UV-spectroscopy, in vitro hemolytic and antifungal activities. The optimum drug loading was 2.5% by weight corresponded to lipid fraction in formulation. Increasing of the drug entrapment was achieved by blending small amount of phospholipid in solid lipid nanoparticle (SLN) dispersions. All AmB lipid dispersions were less aggregated species and hemolytic response than Fungizone^® indicating that lipid nanoparticles could reduce its toxicity. The sustained release profiles of AmB formulations depended on its aggregated form and entrapment efficiency. Too high AmB loaded (5% w/w) showed a biphasic drug release profile probably due to some amounts of drug deposited on the nanosphere surface including in continuous phase which promptly released. For in vitro antifungal testing, all AmB lipid formulations were equal and more effective than both AmB itself and Fungizone^®. These observations suggested that AmB loaded SLNs, nanostructured lipid carriers and modified SLNs by blending lecithin could enhance AmB solubility, prolong release characteristics, reduce toxicity and improve antifungal activity.     

Cuboidal lipid polymer nanoparticles of rosuvastatin for oral delivery

The present work aimed to develop and characterize sustained release cuboidal lipid polymeric nanoparticles (LPN) of rosuvastatin calcium (ROS) by solvent emulsification-evaporation process. A three factor, two level (2³) full-factorial design was applied to study the effect of independent variables, i.e. amount of lipid, surfactant and polymer on dependent variables, i.e. percent entrapment efficiency and particle size. Optimized formulations were further studied for zeta potential, TEM, in vitro drug release and ex vivo intestinal permeability. Cuboidal nanoparticles exhibited average particle size 61.37?±?3.95?nm, entrapment efficiency 86.77?±?1.27% and zeta potential ?6.72?±?3.25?mV. Nanoparticles were lyophilized to improve physical stability and obtain free-flowing powder. Effect of type and concentration of cryoprotectant required to lyophilize nanoparticles was optimized using freeze-thaw cycles. Mannitol as cryoprotectant in concentration of 5-8% w/v was found to be optimal providing zeta potential ?20.4?±?4.63?mV. Lyophilized nanoparticles were characterized using FTIR, DSC, XRD and SEM. Absence of C=C and C–F aromatic stretch at 1548 and 1197?cm^?1, respectively, in LPN indicated coating of drug by lipid and polymer. In vitro diffusion of ROS using dialysis bag showed pH-independent sustained release of ROS from LPN in comparison to drug suspension. Intestinal permeability by non-everted gut sac model showed prolonged release of ROS from LPN owing to adhesion of polymer to mucus layer. In vivo absorption of ROS from LPN resulted in 3.95-fold increase in AUC_0–last and 7.87-fold increase in mean residence time compared to drug suspension. Furthermore modified tyloxapol-induced rat model demonstrated the potential of ROS-loaded LPN in reducing elevated lipid profile.     

Preparation,characterization, and pharmacokinetics study of a novel genistein-loaded mixed micelles system

Genistein (GEN), is a natural dietary isoflavone, has been reported to show anticancer activities. However, its poor aqueous solubility and oral bioavailability limit its clinical application. We designed a novel genistein-loaded mixed micelles (GEN-M) system composed of Soluplus^® and Vitamin E d-α-tocopheryl polyethylene glycol 1000 succinate (TPGS) were prepared by organic solvent evaporation aimed to overcome the challenges of GEN’s poor solubility and then further improve its oral bioavailability. The optimized, spherical-shaped GEN-M was obtained at a ratio of 10:1 (Soluplus^®:TPGS). The mean particle size of GEN-M was 184.7?±?2.8?nm, with a narrow polydispersity index (PDI) of 0.162?±?0.002. The zeta potential value of GEN-M was ?2.92?±?0.01?mV. The micelles solutions was transparent with blue opalescence has high the entrapment efficiency (EE) and drug loading (DL) of 97.12?±?2.11 and 3.87?±?1.26%, respectively. GEN-M was demonstrated a sustained release behavior when formed micelles shown in drug release in vitro. The solubility of GEN in water increased to 1.53?±?0.04?mg/mL after encapsulation. The permeability of GEN across a Caco-2 cell monolayer was enhanced, and the pharmacokinetics study of GEN-M showed a 2.42-fold increase in relative oral bioavailability compared with free GEN. Based on these findings, we conclude that this novel nanomicelles drug delivery system could be leveraged to deliver GEN and other hydrophobic drugs.     

Preparation and optimization of doxorubicin-loaded albumin nanoparticles using response surface methodology

Background: The objective of this work was to optimize the preparation of doxorubicin-loaded albumin nanoparticles (Dox-A-Nps) through desolvation procedures using response surface methodology (RSM). A central composite design (CCD) for four factors at five levels was used in this study.

Method: Albumin nanoparticles were prepared through a desolvation method and were optimized in the aid of CCD. Albumin concentration, amount of doxorubicin, pH values, and percentage of glutaraldehyde were selected as independent variables, particle size, zeta potential, drug loading, encapsulation efficiency, and nanoparticles yield were chosen as response variables. RSM and multiple response optimizations utilizing a quadratic polynomial equation were used to obtain an optimal formulation.

Results: The optimal formulation for Dox-A-Nps was composed of albumin concentration of 17?mg/ml, amount of doxorubicin of 2?mg/ml, pH value is 9 and percentage of glutaraldehyde of 125% of the theoretic amount, under which the optimized conditions gave rise to the actual average value of mean particle size (151?±?0.43?nm), zeta potential (?18.8?±?0.21 mV), drug loading efficiency (21.4?±?0.70%), drug entrapment efficiency (76.9?±?0.21%) and nanoparticles yield (82.0?±?0.34%). The storage stability experiments proved that Dox-A-Nps stable in 4°C over the period of 4 months. The in vitro experiments showed a burst release at the initial stage and followed by a prolonged release of Dox from albumin nanoparticles up to 60?h.

Conclusions: This study showed that the RSM-CCD method could efficiently be applied for the modeling of nanoparticles, which laid the foundation of the further research of immuno nanoparticles.     

Preparation and evaluation of charged solid lipid nanoparticles of tetrandrine for ocular drug delivery system: pharmacokinetics,cytotoxicity and cellular uptake studies

In this study, tetrandrine-loaded cationic solid lipid nanoparticles (TET-CNP) and solid lipid nanoparticles (TET-NP) were prepared by the emulsion evaporation-solidification at low temperature method. The particle size, zeta potential, and entrapment efficiency of TET-CNP and TET-NP were characterized. The results showed that the TET-CNP and TET-NP had average diameters of (15.29?±?1.34) nm and (18.77?±?1.23) nm with zeta potentials of (5.11?±?1.03) mV and (?8.71?±??1.23) mV and entrapment efficiencies of (94.1?±?2.37)% and (95.6?±?2.43)%, respectively. In vitro release studies indicated that the TET-CNP and TET-NP retained the drug entity better than tetrandrine ophthalmic solutions (TET-SOL). In the pharmacokinetics studies, the AUC values of TET-CNP and TET-NP were 1.96-fold and 2.00-fold higher than that of TET-SOL (?p?C_max values of TET-CNP and TET-NP were 2.45-fold and 2.53-fold higher than that of the TET-SOL (p?相似文献   

Co-delivery of gemcitabine and simvastatin through PLGA polymeric nanoparticles for the treatment of pancreatic cancer: in-vitro characterization,cellular uptake,and pharmacokinetic studies

Despite the ongoing extensive research, cancer therapeutics still remains an area with unmet needs which is hampered by shortfall in the development of newer medicines. The present study discusses a nano-based combinational approach for treating solid tumor. Dual-loaded nanoparticles encapsulating gemcitabine HCl (GM) and simvastatin (SV) were fabricated by double emulsion solvent evaporation method and optimized. Optimized nanoparticles showed a particle size of 258?±?2.4?nm, polydispersity index of 0.32?±?0.052, and zeta potential of ?12.5?mV. The size and the morphology of the particles wee further confirmed by transmission electron microscopy (TEM) and scanning electron microscopy, respectively of the particles. The entrapment efficiency of GM and SV in the nanoparticles was 38.5?±?4.5% and 72.2?±?5.6%, respectively. The in vitro release profile was studied for 60?h and showed Higuchi release pattern. The cell toxicity was done using MTT assay and lower IC₅₀ was obtained with the nanoparticles as compared to the pure drug. The bioavailability of GM and SV in PLGA nanoparticles was enhanced by 1.4-fold and 1.3-fold respectively, compared to drug solution. The results revealed that co-delivery of GM and SV could be used for its oral delivery for the effective treatment of pancreatic cancer.     

Bortezomib-loaded solid lipid nanoparticles: preparation,characterization, and intestinal permeability investigation

Bortezomib (BTZ), a proteasome inhibitor, is clinically used for the treatment of multiple myeloma and mantle cell lymphoma via intravenous or subcutaneous administration. Since BTZ has limited intestinal permeability, in this study, solid lipid nanoparticles (SLNs) were selected as lipid carrier to improve the intestinal permeability of BTZ. The nanoparticles were prepared by hot oil-in-water emulsification method and characterized for physicochemical properties. Moreover, in situ single-pass intestinal perfusion technique was used for intestinal permeability studies. Mean particle size of the BTZ-loaded solid lipid nanoparticles (BTZ-SLNs) was 94.6?±?0.66?nm with a negative surface charge of –18?±?11?mV. The entrapment efficiency of the BTZ-SLNs was 68.3?±?3.7% with a drug loading value of 0.8?±?0.05%. Cumulative drug release (%) over 48?h, indicated a slow release pattern for nanoparticles. Moreover, the SEM image showed a spherical shape and uniform size distribution for nanoparticles. Also, FTIR analysis indicated that BTZ was successfully loaded in the SLNs. The results of the intestinal perfusion studies revealed an improved effective permeability for BTZ-SLNs with a P_eff value of about threefold higher than plain BTZ solution.     

Central composite rotatable design for optimization of budesonide-loaded cross-linked chitosan–dextran sulfate nanodispersion: characterization,in vitro diffusion and aerodynamic study

Budesonide is a BCS class II drug with low water solubility (0.045?mg/mL) and low oral bioavailability (6–8%) due to high first pass effect. The aim is to prepare cross-linked chitosan–dextran sulfate nanoparticles and/or nanodispersion. Nebulizable cross-linked nanodispersion was prepared by the solvent evaporation technique and characterized through XRPD, FTIR, mean particle size (MPS), polydispersity index (PDI), zeta potential (ZP), drug loading, entrapment efficiency, SEM, % production yield, in vitro diffusion, aerodynamic and stability study. The optimization of formulation was done by using central composite rotatable design to study the effect of independent variables, concentration of chitosan (X1) and concentration dextran sulfate (X2) on the dependent variables, MPS (Y1), drug loading (Y2) and % CDR (% cumulative drug release) (Y3). The MPS, PDI, and ZP of budesonide-loaded nanoparticles were 160.8?±?0.27?nm, 0.36?±?0.04, and 13?±?0.894?mV, respectively. The percent drug loading of all the batches was found in range of 10–16%. The emitted drug in target region (alveoli) was measured by using HPLC and it was found to be 18.26%. It was found that, nanodispersion had the optimum in vitro aerodynamic behavior. Stability study results showed no significant change in MPS, PDI, ZP, and % CDR after three month storage. In conclusion, cross-linked chitosan–dextran sulfate nanoparticles had properties suitable for nebulizable dispersion of increased drug loading, in vitro drug release and avoiding the first pass effect.     

Nanoencapsulation of betamethasone valerate using high pressure homogenization–solvent evaporation technique: optimization of formulation and process parameters for efficient dermal targeting

Betamethsone valerate (BMV), a medium potency topical corticosteroid, is one of the most commonly employed pharmacological agents for the management of atopic dermatitis in both adults and children. Despite having remarkable pharmacological efficacy, these agents have limited clinical implication due to poor penetration across the startum cornum (SC). To mitigate issues related to targeted delivery, stability, and solubility as well as to potentiate therapeutic and clinical implication, the nanodelivery systems have gained remarkable recognition. Therefore, this study was aimed to encapsulate BMV into the chitosan nanoparticles (CS-NPs) for optimum dermal targeting and improved penetration across the SC. The prepared NPs were characterized for particle size, zeta potential, polydispersity index, entrapment efficiency, loading capacity, crystallinity, thermal behavior, morphology, in vitro release kinetics, drug permeation across the SC, and percentage of drug retained into various skin layers. Results showed that optimized BMV-CS-NPs exhibited optimum physicochemical characteristics including small particle size (< 250?±?28?nm), higher zeta potential (+58?±?8?mV), and high entrapment efficiency (86?±?5.6%) and loading capacity (34?±?7.2%). The in vitro release study revealed that BMV-CS-NPs displayed Fickian-diffusion type mechanism of release in simulated skin surface (pH 5.5). Drug permeation efficiency and the amount of BMV retained into the epidermis and the dermis were comparatively higher in case of BMV-CS-NPs compared to BMV solution. Conclusively, we anticipated that BMV-CS-NPs could be a promising nanodelivery system for efficient dermal targeting of BMV and improved anti-AD efficacy.     

Formulation and in vitro evaluation of prolonged release floating microspheres of atenolol using multicompartment dissolution apparatus

The aim of the present work was to prepare floating microspheres of atenolol as prolonged release multiparticulate system and evaluate it using novel multi-compartment dissolution apparatus. Atenolol loaded floating microspheres were prepared by emulsion solvent evaporation method using 3² full factorial design. Formulations F1 to F9 were prepared using two independent variables (polymer ratio and % polyvinyl alcohol) and evaluated for dependent variables (particle size, percentage drug entrapment efficiency and percentage buoyancy). The formulation(F8) with particle size of 329?±?2.69 µm, percentage entrapment efficiency of 61.33% and percentage buoyancy of 96.33% for 12?h was the of optimized formulation (F8). The results of factorial design revealed that the independent variables significantly affected the particle size, percentage drug entrapment efficiency and percentage buoyancy of the microspheres. In vitro drug release study revealed zero order release from F8 (98.33% in 12?h). SEM revealed the hollow cavity and smooth surface of the hollow microspheres.     

Preparation and evaluation of Baicalin-loaded cationic solid lipid nanoparticles conjugated with OX26 for improved delivery across the BBB

Purpose: A novel brain targeting drug delivery system based on OX26 antibody conjugation on PEGylated cationic solid lipid nanoparticles (OX26-PEG-CSLN) was prepared.

Methods: The Baicalin-loaded PEGylated cationic solid lipid nanoparticles modified by OX26 antibody (OX26-PEG-CSLN) were prepared by emulsion evaporation–solidification at low temperature method. The immune-gold labeled OX26-PEG-CSLN was visualized by transmission electron microscopy. The mean diameter and zeta potential of OX26-PEG-CSLN, PEG-CSLN and CSLN were determined using a Zetasizer. The entrapment efficiency of OX26-PEG-CSLN, PEG-CSLN and CSLN was determined by ultrafiltration centrifugation method. And the solid-state characterization of OX26-PEG-CSLN and CSLN were analyzed by X-ray. Pharmacokinetics studies were conducted by in vivo microdialysis in rat cerebrospinal fluid.

Results: The results showed that the OX26-PEG-CSLN, PEG-CSLN and CSLN had average diameters of 47.68?±?1.65, 27.20?±?1.70 and 33.89?±?5.74?nm, Zeta potentials of ?0.533?±?0.115?mV, 11.200?±?0.500?mV and 11.080?±?1.170?mV and entrapment efficiencies of 83.03?±?0.01%, 92.90?±?3.50% and 97.83?±?0.19%, respectively. In the pharmacokinetics studies, the AUC value of OX26-PEG-CSLN was11.08-fold higher than that of the Baicalin solution (SOL) (p?p?>?0.05); the C_max value of OX26-PEG-CSLN was 7.88-fold higher than that of SOL (p?p?Conclusion: These results demonstrated OX26-PEG-CSLN could be a promising carrier to deliver drugs across the BBB for the treatment of brain diseases.     

Nanoformulation and antimicrobial evaluation of newly synthesized thiouracil derivatives

The present work reports the synthesis of a new series of pyridopyrimidine derivatives. The newly synthesized compounds were characterized by various analytical and spectral techniques. In addition, their antimicrobial activity was evaluated as well as modeling studies were performed to investigate their ability to recognize and bind to the biotin carboxylase (BC)-active site. The results showed a broad spectrum antibacterial and antifungal profile of the synthesized derivatives. Docking results demonstrated that all members of this class of new derivatives were able to recognize the active site of Escherichia coli BC and form different types of bonding interactions with key active site amino acid residues. Besides the compounds with promising antimicrobial activity in addition to 6-aminothiouracil, as control, were incorporated into polycaprolactone nanoparticles to improve their water solubility, permeability through physiological barriers and consequently enhanced therapeutic efficacy. The compounds-loaded nanoparticles were prepared using single emulsion-solvent evaporation technique, and their diameters were found to be in the range 136?±?30 to 213?±?28?nm. Transmission electron microscopy (TEM) showed a spherical and dense morphology of the nanoparticles. The results also showed high entrapment efficiency of the synthesized bioactive compounds in the nanoparticles (85?±?5% to 91?±?2%) with a desirable in vitro biodegradation and release profiles.     

Biodegradable nanoparticles for improved kidney bioavailability of rhein: preparation,characterization, plasma,and kidney pharmacokinetics

The aim of this work is to develop biodegradable nanoparticles for improved kidney bioavailability of rhein (RH). RH-loaded nanoparticles were prepared using an emulsification solvent evaporation method and fully characterized by several techniques. Kidney pharmacokinetics was assessed by implanting a microdialysis probe in rat's kidney cortex. Blood samples were simultaneously collected (via femoral artery) for assessing plasma pharmacokinetics. Optimized nanoparticles were small, with a mean particle size of 132.6?±?5.95?nm, and homogeneously dispersed. The charge on the particles was nearly zero, the encapsulation efficiency was 62.71?±?3.02%, and the drug loading was 1.56?±?0.15%. In vitro release of RH from the nanoparticles showed an initial burst release followed by a sustained release. Plasma and kidney pharmacokinetics showed that encapsulation of RH into nanoparticles significantly increased its kidney bioavailability (AUC_kidney/AUC_plasma?=?0.586?±?0.072), clearly indicating that nanoparticles are a promising strategy for kidney drug delivery.     

Design,characterization, and evaluation of intranasal delivery of ropinirole-loaded mucoadhesive nanoparticles for brain targeting

Context: Parkinson disease (PD) is a common, progressive neurodegenerative disorder, characterized by marked depletion of striatal dopamine and degeneration of dopaminergic neurons in the substantia nigra.

Objective: The purpose of the present study was to investigate the possibility of targeting an anti-Parkinson’s drug ropinirole (RH) to the brain using polymeric nanoparticles.

Materials and methods: Ropinirole hydrochloride (RH)-loaded chitosan nanoparticles (CSNPs) were prepared by an ionic gelation method. The RH-CSNPs were characterized for particle size, polydispersity index (PDI), zeta potential, loading capacity, entrapment efficiency in vitro release study, and in vivo distribution after intranasal administration.

Results and discussion: The RH-CSNPs showed sustained release profiles for up to 18?h. The RH concentrations (% Radioactivity/g) in the brain following intranasal administration (i.n.) of RH-CSNPs were found to be significantly higher at all the time points compared with RH solution. The concentration of RH was highest in the liver (7.210?±?0.52), followed by kidneys (6.862?±?0.62), intestine (4.862?±?0.45), and lungs (4.640?±?0.92) in rats following i.n. administration of RH-CSNPs. Gamma scintigraphy imaging in rats was performed to ascertain the localization of drug in the brain following intranasal administration of formulations. The brain/blood ratios obtained (0.251?±?0.09 and 0.386?±?0.57 of RH (i.n.) and RH-CSNPs (i.n.), respectively) at 0.5?h are indicative of direct nose to brain transport, bypassing the blood–brain barrier (BBB).

Conclusion: The novel formulation showed the superiority of nose to brain delivery of RH using mucoadhesive nanoparticles compared with other delivery routes reported earlier.     

Preparation,characterization and in vitro anticancer activity of paclitaxel conjugated magnetic nanoparticles

In this study, magnetic nanoparticles (MNPs) coated with L-aspartic acid (F-Asp NPs) were synthesized through a co-precipitation method and conjugated with paclitaxel (PTX) (F-Asp-PTX NPs) by esterification reaction between the carboxylic acid end groups on MNPs surface and the hydroxyl groups of the PTX and studied its cytotoxic effect in vitro. The successful conjugating of PTX onto the nanoparticles (NPs) was confirmed by X-ray diffraction (XRD), thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), fourier transform infrared spectroscopy (FTIR), vibrating sample magnetometer (VSM) and transmission electron microscopy (TEM) techniques. The results showed that the average size was 46.11?±?7.8 (mean?±?SD (n?=?25)) nm. The cytotoxicity of void of PTX and F-Asp-PTX NPs were compared to each other by MTT assay of the treated MCF-7 cell line. The F-Asp-PTX NPs showed pH-dependent drug release behavior. These studies specify that F-Asp-PTX NPs have a very remarkable anticancer effect, for breast cancer cell line.     

Mannosylated solid lipid nanoparticles for lung-targeted delivery of Paclitaxel

Objective: The present study discusses paclitaxel (PTX)-loaded mannosylated-DSPE (Distearoyl-phosphatidyl-ethanolamine) solid lipid nanoparticles (M-SLNs) using mannose as a lectin receptor ligand conjugate for lung cancer targeting and to increase the anticancer activity of PTX against A549 lung’s epithelial cancer cells.

Materials and methods: The PTX-SLNs were prepared by solvent injection method and mannose was conjugated to the free amine group of stearylamine. The M-SLNs obtained were characterized for their particle size, polydispersity index, zeta potential and morphology by transmission electron microscope.

Results: The M-SLNs were spherical in shape with 254?±?2.3?nm average size, positive zeta potential (3.27?mV), 79.4?±?1.6 drug entrapment efficiency and showed the lower extent of drug release 40% over 48?h in vitro. Cytotoxicity study on A549 cell lines and biodistrubtion study of drug revealed that M-SLNs deliver a higher concentration of PTX as compared to PTX-SLNs in an alveolar cell site.

Discussion and conclusion: These results suggested that mannosylated M-SLNs are safe and potential vector for lung cancer targeting.     

Development and uniform evaluation of ropinirole osmotic pump tablets with REQUIP XL both in vitro and in beagle dogs

REQUIP XL, prolonged release formulation of ropinirole hydrochloride (RH) in market, could release ropinirole constantly and showed satisfactory therapeutic effect and good compliance. REQUIP XL was composed of more than 10 kinds of excipients and prepared by Geomatrix technology, which was complex and laborious. The purpose of this study was to obtain a dosage form of RH with similar in vitro release profile and bioequivalence in vivo compared to REQUIP XL. Osmotic pump tablet combined with fast release phase was selected as the delivery system of RH and similar release curves were obtained in different media. The tablets were also administered to beagle dogs and the pharmacokinetic parameters were calculated using a non-compartmental model. C_max, t_max, mean residence time (MRT), and area under the curve from 0 to 24?h (AUC_0–24) were 3.97?±?0.53?ng/mL, 3.58?±?0.49?h, 8.29?±?0.93?h, and 35.20?±?8.11?ng/mL???h for ropinirole osmotic pump tablets (ROPT) and 4.15?±?1.07?ng/mL, 2.92?±?0.49?h, 7.84?±?1.09?h, and 34.34?±?10.06?ng/mL???h for REQUIP XL. The log-transformed mean C_max and AUC_0–24 of ROPT were about 92.15% and 102.49% relative to that of REQUIP XL, respectively. The 90% confidence intervals of C_max and AUC_0–24 for ROPT were 75.69–115.31% and 88.89–122.30%, respectively. So it could be concluded that ROPT was uniform with REQUIP XL both in vitro and in beagles and the release profiles of Geomatrix technology may be obtained by osmotic pump combined with fast release technology.     

Chlorogenic acid stabilized nanostructured lipid carriers (NLC) of atorvastatin: formulation,design and in vivo evaluation

The present work was aimed at developing an optimized oral nanostructured lipid carrier (NLC) formulation of poorly soluble atorvastatin Ca (AT Ca) and assessing its in vitro release, oral bioavailability and pharmacodynamic activity. In this study, chlorogenic acid, a novel excipient having synergistic cholesterol lowering activity was utilized and explored in NLC formulation development. The drug-loaded NLC formulations were prepared using a high pressure homogenization technique and optimized by the Box-Behnken statistical design using the Design-Expert software. The optimized NLC formulation was composed of oleic acid and stearic acid as lipid phase (0.9% w/v), poloxamer 188 as surfactant (1% w/v) and chlorogenic acid (0.05% w/v). The mean particle size, polydispersity index (PDI) and % drug entrapment efficiency of optimized NLC were 203.56?±?8.57?nm, 0.27?±?0.028 and 83.66?±?5.69, respectively. In vitro release studies showed that the release of drug from optimized NLC formulations were markedly enhanced as compared to solid lipid nanoparticles (SLN) and drug suspension. The plasma concentration time profile of AT Ca in rats showed 3.08- and 4.89-fold increase in relative bioavailability of developed NLC with respect to marketed preparation (ATORVA® tablet) and drug suspension, respectively. Pharmacodynamic study suggested highly significant (**p?0.01) reduction in the cholesterol and triglyceride values by NLC in comparison with ATORVA® tablet. Therefore, the results of in vivo studies demonstrated promising prospects for successful oral delivery of AT Ca by means of its chlorogenic acid integrated NLC.     

Targeted thrombolysis by using c-RGD-modified N,N,N-Trimethyl Chitosan nanoparticles loaded with lumbrokinase

Lumbrokinase (LK) has strong fibrinolytic and thrombolytic activities, but it has a short half-life, can be easily inactivated, and may cause hemorrhage as a side effect. This study develops a potential thrombolytic therapy by fabricating N,N,N-Trimethyl Chitosan (TMC) nanoparticles modified with the cyclic Arg-Gly-Asp-Phe-Lys peptide (c-RGD) and loaded with LK (i.e. c-RGD-LK-NPs). The binding of c-RGD to platelet membrane GPIIb/IIIa receptors is expected to enable targeted delivery of the c-RGD-conjugated TMC to the thrombus. The synthesized c-RGD-LK-NPs had a mean particle size of 232.0?nm, zeta potential of 19.8?mV, entrapment efficiency of 52.7%?±?2.5%, and loading efficiency of 17.4%?±?0.65%. Transmission electron microscopy showed that they were generally spherical. The c-RGD-LK-NPs gave a cumulative in vitro LK release of 80.6% over 8?h, and the activity of LK was close to 80%, indicating that the nanoparticles protected the activity of LK. In vitro blood clot lysis assays were carried out and in vivo thrombolysis effect was tested in Sprague-Dawley rats carotid artery thrombus model. In all cases, the c-RGD-LK-NPs showed superior performance compared with the free LK and the unmodified TMC nanoparticles loaded with LK. The c-RGD-LK-NPs reagent is expected to be potentially useful in treating thromboembolic diseases.     

Folate-conjugated albumin nanoparticles for rheumatoid arthritis-targeted delivery of etoricoxib

Objective: The present study discusses folic acid-etoricoxib-bovine serum albumin nanoparticles (F-ETX-NPs) using folic acid as an over expressed folate receptor ligand for activated macrophages in targeting of rheumatoid arthritis.

Materials and methods: For this purpose etoricoxib-loaded BSA nanoparticles (ETX-NPs) were prepared by desolvation method and activated folic acid conjugation with free amine group of BSA was confirmed by FTIR study and zeta potential measurements.

Results: The F-ETX-NPs showed spherical in shape with 215.8?±?3.2?nm average size?+?7.8?mV zeta potential, 72?±?1.3% etoricoxib entrapment efficiency and showed 93.1?±?2.2% cumulative etoricoxib release upto 72?h. The etoricoxib concentration from F-ETX-NPs was found to be 9.67?±?0.34?µg/g in inflamed joint after 24?h administration revealed remarkably targeting potential to the activated macrophages cells and keep at a high level during the experiment.

Discussion and conclusion: These results suggest that F-ETX-NPs are potentially vector for activated macrophages cells targeting of rheumatoid arthritis.