Q控制图初始性能的改进

针对单值Q控制图在过程初始阶段所面临的突出问题,即检出力不强的弱点,提出一种改进单值Q控制图初始性能的质量控制图。它是建立在贝叶斯预测理论的基础上,应用在过程方差是未知的稳态生产过程的条件下。对控制图处于稳态和过程均值发生偏移时的性能及基于贝叶斯模型先验估计值对控制图的影响进行了讨论,结果表明控制图的特性适用于监视稳定生产过程的初始阶段,而这种特性恰好弥补了Q控制图在初始阶段性能不佳的弱点。     

面向质量目标的Q控制图设计

针对大批量生产开始阶段的过程监控,提出了一种基于预定质量目标的Q控制图监控方法.其基本思路是利用面向质量目标的统计公差技术与Q控制图相结合应用,以实现大批量过程开始阶段均值和方差未知时面向质量目标的过程监控.基于质量目标建立统计公差(CP*,k*),并将该统计公差转化为基于给定置信概率的对CP和k的估计值的判定条件.通过案例分析,面向质量目标的Q控制图能够在过程保持受控状态的前提下以一定置信概率保证质量目标.     

CUSUM控制图在空调充氟生产过程中的应用研究

经典的休哈特控制对质量特征值的均值波动检出力较强,采用单值－移动极差控制图控制空调充氟量在短期内往往很难发现充氟量偏差值的漂移,导致充氟量偏差调整不及时,本文采用累积和控制图（CUSUM）来控制充氟量偏差的变化,改进了充氟偏差调整方式,中保证质量的同时降低了生产成本。     

单值-移动均值控制图在热处理工序中的应用

在研究统计过程控制理论的基础上，提出了一种全新的正态分布控制图——单值一移动均值控制图。论述了它的构造原理和控制线计算公式，提出了判异准则，介绍了此控制图在热处理工序的应用状况，效果显著。     

联合监控均值和方差的累积和控制图优化设计

为了提高监测均值和方差微小偏移的敏感度,围绕生产过程质量控制,建立同时监控均值和方差的累积和控制图.模型考虑均值和方差的变化,针对生产过程中的微小偏差,提出了一个新的累积和控制图,并给出了基于马尔可夫链理论的新控制图的平均链长计算方法.编程求解后对比文献中各控制图的平均链长数据以及更换变量数值改进控制图,通过计算变动比率得出新控制图的检测力度在不同偏移力度下都明显优于其他控制图方法.     

信噪比在分析残差控制图检测能力中的应用

应用信噪比与平均运行长度2种方法,分析了自相关过程由时间序列模型AR(1)描述时,残差控制图对过程均值变化的检测能力.结果表明,信噪比是控制图的检测能力的一个良好指标,在合理参数0.1≤λ≤1-φ范围内,残差EWMA控制图对过程均值小偏移较灵敏,对过程均值大偏移的检测能力略差于残差Shewhart控制图.     

基于GRU神经网络的自相关过程残差控制图

为提升自相关过程监控的效率,提出基于门控循环单元(gated recurrent unit,GRU)神经网络的自相关过程残差控制图。采用受控下的自相关过程数据对GRU网络进行离线训练与测试,对预测误差进行监控,形成控制用残差控制图。采用训练好的GRU网络预测当前过程波动,利用控制用残差控制图判定当前过程是否失控。运用蒙特卡洛仿真法,与基于一阶自回归模型、BP神经网络以及支持向量回归构建的残差控制图进行性能对比。研究表明,过程受控时,所提残差控制图与其他3种的稳态平均运行链长相差不大,即4者的性能表现相当;而在均值偏移异常过程中,所提残差控制图的平均运行链长远小于其他3种,对自相关过程均值偏移具有较好的监控性能。     

平稳自相关过程的EWMA控制图

讨论了对平稳自相关过程中出现的较小波动进行监控的一种方法.采用自回归移动平均(ARMA)模型对平稳自相关过程进行适当的拟合,通过计算残差的方法消除过程中的自相关要素,并在此基础上提出对于均值和方差出现的较小波动进行监控的指数加权移动平均(EWMA)控制图的构造.通过与其它几种方法的比较来说明该方法在监控平稳自相关过程时有更好的效率.     

单值移动极差控制图在脱旨浓度控制过程中的应用

本文简要介绍了控制图的作用和种类,通过对脱脂浓度参数一游离碱浓度作单值移动极差控制图进行分析监控,表明单值移动极差控制阻对异常反应灵敏,能够很好地起到预防控制作用。     

VSI Q控制图应用研究

VSI Q控制图可以解决经典休哈特控制图在样本数据缺乏的情况下不能应用的问题,并且可以加快检出速度.具体方法是将样本数据转换成服从标准正态分布的统计数据,再利用可变抽样区间技术确定抽样间隔时间.应用研究证明,VSI Q控制图在缺乏样本数据时也能用于监控生产过程,快速检测出异常.     

Insertion of triangulated surfaces into a meccano tetrahedral discretization by means of mesh refinement and optimization procedures

In this paper, we present a new method for inserting several triangulated surfaces into an existing tetrahedral mesh generated by the meccano method. The result is a conformal mesh where each inserted surface is approximated by a set of faces of the final tetrahedral mesh. First, the tetrahedral mesh is refined around the inserted surfaces to capture their geometric features. Second, each immersed surface is approximated by a set of faces from the tetrahedral mesh. Third, following a novel approach, the nodes of the approximated surfaces are mapped to the corresponding immersed surface. Fourth, we untangle and smooth the mesh by optimizing a regularized shape distortion measure for tetrahedral elements in which we move all the nodes of the mesh, restricting the movement of the edge and surface nodes along the corresponding entity they belong to. The refining process allows approximating the immersed surface for any initial meccano tetrahedral mesh. Moreover, the proposed projection method avoids computational expensive geometric projections. Finally, the applied simultaneous untangling and smoothing process delivers a high‐quality mesh and ensures that the immersed surfaces are interpolated. Several examples are presented to assess the properties of the proposed method.     

Certification Institutions Expected to Update and Transfer Information on Present Standards

Standards are the basis for production enterprises to organize production, ex-factory inspection, trade (delivery) and technical exchanges, product certification, quality arbitration and supervision.……     

Flow calorimeter for enthalpy increment measurements on condensed gases

A flow calorimeter for enthalpy increment measurements on condensed gases is presented. A better knowledge of the properties of the liquefied natural gas is needed, and therefore a liquid loop has been designed for our flow calorimeter. The fluid loop in the calorimeter is designed in order to avoid the two-phase region, since two phases would give compositional disturbances in the measurements. The avoidance of the two-phase region is made possible by increasing the pressure of the test fluid after the measurement section, then heating the fluid at super-critical pressure past the critical point. Finally, the fluid is throttled to the low-pressure gas state at the inlet condition of the compressor that circulates the fluid. To perform the pressure increase, a new cryogenic pump has been designed. To evaluate the new equipment, measurements were taken on liquid ethane over the temperature range 146–256 K at pressure between 0.9 and 5.1 MPa.     

From Industry 4.0 to Research 4.0. Development of High Performance Fibers in the Light of Digitization

We associate a variety of innovations with the term ＂Industry 4.0＂. The pioneer of many 4.0 modifications forms the basisfor the trend towards the integrated di...     

Refrigerators Enter a New Era of Health Preservation Frestech initiates the establishment of China's first standard for household sterilization refrigerators

On November 30, 2007, the China Association for Standardization (CAS) held a press conference at Beijing Diaoyutai State Guest House. Leaders from the China Household Electric Appliance Research Institute, the China Household Electric Appliance Association, and the China Consumers' Association attended and made speeches.……     

Roman iron and steel: A review

ABSTRACT

The production of ferrous metal increased during the Roman Late Republican period, Principate and Empire. The direct bloomery process was used to extract the metal from its ores using slag-tapping and slag-pit furnaces. The fuel was charcoal and an air blast was introduced by bellows-operated tuyères. Iron formed as a bloom, often as a spongy mass of metal, which contained impurities from the smelting process, including unreacted ore, fuel, slag and fragments from the furnace walls, while the metal was often inhomogeneous with varied carbon contents. Blooms were either smithed directly into bars or ingots or they were broken up, which also allowed the removal of gross impurities and a selection of pieces with similar properties to be made. These could then be forge-welded together and formed into characteristically shaped ingots. Making steel in the furnace seems to have been achieved: it depended on the ore and the furnace and conditions within it. Surface carburization was also carried out. Iron and steel were used extensively in construction and for tools and weapons. Fire welding was often used to add pieces of steel to make the edges of tools and weapons, which could be heat-treated by quenching to harden them.     

Optimum-Simulation von Ernteprozessen

Zusammenfassung Bei der Gestaltung von Ernteprozessen — beispielsweise des Prozesses Mähdrusch, Körnertransport und -abnahme — als transportverbundene Fließarbeitsverfahren mit mindestens zwei verschiedenen Arbeitsmitteln gibt es einen großen Optimierungsspielraum. Solche Prozesse sind mehrstufige Bedienungsprozesse mit gemischter Anordnung der Bedienungseinrichtungen. Außerdem besitzen sie stark ausgeprägte räumliche Aspekte. Es wird vor allem gezeigt, welche Merkmale solcher Prozesse in Simulationsmodellen abgebildet sein müssen, welche Zielgrößen in Abhängigkeit von welchen Einflußgrößen unter Berücksichtigung welcher Prozeßbedingungen ermittelt werden sollten und wie der Bewertungsprozeß zur Ermittlung der gewünschten Informationen gestaltet werden muß.     

A study of centrifugal cast high boron high speed steel

In the present study a high‐boron high speed steel (HSS) roll material was designed. Many expensive alloy elements have been substituted by cheap boron alloy, and high‐boron high speed steel roll has been manufactured by centrifugal casting method. The microstructures, mechanical properties and wear resistance of centrifugal casting high‐boron high speed steel roll have been investigated by optical microscopy (OM), scanning electron microscopy (SEM), and X‐ray diffraction (XRD) analysis, hardness test, impact test and wear test. The results indicated that the solidification microstructures of high‐boron high speed steel roll consisted of M₂(B,C), (W,Mo)₂(B,C), M₃(B,C), M₂₃(B,C)₆ type borocarbides and martensite, a small amount of retained austenite. Borocarbides were continuously distributed over the grain boundary. After quenching from 1050 °C, local broken network appeared in partial borocarbides, and fine secondary borocarbide precipitated from the matrix. After tempering from 525 °C, the amount of precipitated borocarbide increased significantly. After heat treatment, the hardness of high‐boron high speed steel roll excelled 60 HRC, and its impact toughness excelled 8.0 J/cm². The single groove steel rolling amount of high‐boron high speed steel rolls increases by 500% than that of bainite cast iron roll, when the rolls are used in K₁ mill housing of bar mill.     

Thixotropy of Systems with Shear Thinning and Plastic Flow Behavior

The definition of the thixotropy is a decrease in viscosity with time in shear and a subsequent recovery of viscosity after the shear deformation is removed.We ...