Electrical conductivity studies of AgI–Ag<Subscript>2</Subscript>O–B<Subscript>2</Subscript>O<Subscript>3</Subscript>–TeO<Subscript>2</Subscript> glasses

The silver ion conducting boro tellurite glasses have been prepared by melt quenching technique. The conductivity and dielectric measurements were carried out on these glasses as a function of frequency from 10 Hz to 10 MHz over a temperature range of 298–328 K. The analysis of conductivity measurement shows that the silver ions are the main charge carriers, which are considered to be the predominant factor playing the role of enhancing the conductivity. The power law exponent s and stretched exponent β are found to be insensitive to both temperature and compositions. AC conductivity and dielectric relaxation behaviour of these glasses were also studied and the results are discussed in view of the structure of borate and tellurite network.     

Dielectric and a.c. conductivity studies in pure and manganese doped layered K<Subscript>2</Subscript>Ti<Subscript>4</Subscript>O<Subscript>9</Subscript> ceramics

The results of a.c. electrical conductivity studies have been reported on pure K₂Ti₄O₉ (named PT) and its 1.0 molar percentage of MnO₂ doped derivative (named MPT) ceramics in the temperature range 373–898 K. Four regions have been identified in the log(σ_a.c. T) versus 1000/T plots. Conduction in the lowest temperature region I is attributed to the mixed exchangeable interlayer ionic and electronic hopping (polaron) conduction. A dielectric loss peak with distribution of relaxation times perturbs the conduction in next regions II and III. However, in region III for both the samples non-relaxor ferroelectric property may be proposed. The modified interlayer ionic conduction has been proposed towards the higher temperature region IV. Loss tangent (tan δ) versus frequency and dielectric constant (ε) versus frequency plots at different temperatures have also been given for both the samples. The results of tan δ versus temperature and ε versus temperature at different frequencies have further been reported for both of the above compounds in this paper.     

Dielectric relaxation and ionic conductivity studies of Na<Subscript>2</Subscript>ZnP<Subscript>2</Subscript>O<Subscript>7</Subscript>

The Na₂ZnP₂O₇ compound was obtained by the conventional solid-state reaction. The sample was characterized by X-ray powder diffraction, infrared analysis and electrical impedance spectroscopy. The impedance plots show semicircle arcs at different temperatures and an electrical equivalent circuit has been proposed to explain the impedance results. The circuits consist of the parallel combination of bulk resistance R _p and constant phase elements CPE. Dielectric data were analyzed using complex electrical modulus M* for the sample at various temperatures. The frequency dependence of the conductivity is interpreted in terms of Jonscher’s law. The conductivity σ _d.c. follows the Arrhenius relation. The near value of activation energies obtained from the analysis of M″ and conductivity data confirms that the transport is through ion hopping mechanism, dominated by the motion of the Na⁺ ions in the structure of the investigated materials.     

Electrical conductivity of Cs<Subscript>3</Subscript>PO<Subscript>4</Subscript> doped with trivalent cations

Cs_{3 ? 3x} M _x PO₄ (M = Sc, Y, La, Sm, Nd) solid electrolytes have been synthesized, their phase composition has been determined, and their electrical conductivity has been measured as a function of temperature. In all of the systems, we have identified cesium orthophosphate based solid solutions. Above ～550°C, the solid solutions are isostructural with the high-temperature, cubic phase of Cs₃PO₄. They offer high cesium ion conductivity owing to the formation of cesium vacancies via 3Cs⁺ → M³⁺ substitutions and the decrease in phase transition temperature. The conductivity of the synthesized solid solutions, (4.8?5.6) × 10^?3 S/cm at 300°C and (1.6?1.9) × 10^?1 S/cm at 800°C, is at the level of earlier studied Cs_{3 ? 2x} M _x ^II PO₄ solid electrolytes.     

Structural,dielectric, ac conductivity and electromagnetic shielding properties of polyaniline/Ni<Subscript>0.5</Subscript>Zn<Subscript>0.5</Subscript>Fe<Subscript>2</Subscript>O<Subscript>4</Subscript> composites

A conducting polymer, polyaniline (PANI)/Ni_0.5Zn_0.5Fe₂O₄ composites with high dielectric absorbing properties and electromagnetic shielding effectiveness at low frequencies were successfully synthesized through a simple in situ emulsion polymerization. PANI was doped with hydrochloric acid to improve its electrical properties and interactions with ferrite particles. PANI/Ni_0.5Zn_0.5Fe₂O₄ composites were characterized by X-ray diffraction analysis, scanning electron microscopy, transmission electron microscopy, Fourier transform infrared spectroscopy and thermal gravimetric analysis. Frequency dependence of dielectric and ac conductivity (σ_ac) studies have been undertaken on the PANI/Ni_0.5Zn_0.5Fe₂O₄ composites in the frequency range 50 Hz–5 MHz. The electrical conduction mechanism in the PANI/Ni_0.5Zn_0.5Fe₂O₄ is found to be in accordance with the electron hopping model. Further, frequency dependence of electromagnetic interference (EMI) shielding effectiveness (SE) is studied. The EMI shielding effectiveness is found to decrease with an increase in the frequency. The maximum value 55.14 dB of SE at 50 Hz was obtained at room temperature for PANI/Ni_0.5Zn_0.5Fe₂O₄ composites in the 50 Hz–5 MHz frequency range. PANI/Ni_0.5Zn_0.5Fe₂O₄ composites were demonstrated as a promising functional material for the absorbing of electromagnetic waves at low frequencies because of a large amount of dipole polarizations in the polymer backbone and at the interfaces of the Ni–Zn ferrite particles and PANI matrix.     

Synthesis of polyaniline/ZrO<Subscript>2</Subscript> nanocomposites and their performance in AC conductivity and electrochemical supercapacitance

Polyaniline/zirconium oxide (PANI/ZrO₂) nanocomposites have been synthesized by incorporating ZrO₂ nanoparticles into the PANI matrix via liquid–liquid interfacial polymerization method. The composite formation and structural changes in PANI/ZrO₂ nanocomposites were investigated by powder X-ray diffraction (PXRD), scanning electron microscopy (SEM) and Fourier transform infrared spectroscopy (FT-IR). PXRD pattern of PANI/ZrO₂ nanocomposites exhibited sharp and well-defined peaks of monoclinic phase of ZrO₂ in PANI matrix. SEM images of the composites showed that ZrO₂ nanoparticles were dispersed in the PANI matrix. The FT-IR analysis revealed that there was strong interaction between PANI and ZrO₂. AC conductivity and dielectric properties of the nanocomposites were studied in the frequency range, 50–10⁶ Hz. AC conductivity of the nanocomposites obeyed the power law indicating the universal behaviour of disordered media. The nanocomposites showed high dielectric constant in the order of 10⁴, which could be related to dielectric relaxation phenomenon. Further, the materials were checked for their supercapacitance performance by using cyclic voltammetry (CV), chronopotentiometry (CP) and electrochemical impedance spectroscopy (EIS). Among the synthesized nanocomposites, PANI/ZrO₂-25 wt.% showed a higher specific capacitance of 341 F g^?1 at 2 m Vs^?1 and good cyclic stability with capacitance retention of about 88% even after 500 charge–discharge cycles.     

Dielectric properties of B<Subscript>2</Subscript>O<Subscript>3</Subscript> doped Sm(Co<Subscript>1/2</Subscript>Ti<Subscript>1/2</Subscript>)O<Subscript>3</Subscript> ceramics at microwave frequency

The microwave dielectric properties and the microstructures of Sm(Co_1/2Ti_1/2)O₃ ceramics with B₂O₃ additions (0.25 and 0.5 wt%) prepared by conventional solid-state route have been investigated. The prepared Sm(Co_1/2Ti_1/2)O₃ exhibited a mixture of Co and Ti showing 1:1 order in the B-site. Doping with B₂O₃ (up to 0.5 wt%) can effectively promote the densification of Sm(Co_1/2Ti_1/2)O₃ ceramics with low sintering temperature. It is found that Sm(Co_1/2Ti_1/2)O₃ ceramics can be sintered at 1,260 °C due to the grain boundary phase effect of B₂O₃ addition. At 1,290 °C, Sm(Co_1/2Ti_1/2)O₃ ceramics with 0.5 wt% B₂O₃ addition possess a dielectric constant (ε _r) of 27.7, a Q × f value of 33,600 (at 9 GHz) and a temperature coefficient of resonant frequency (τ_f) of −11.4 ppm/ °C. The B₂O₃-doped Sm(Co_1/2Ti_1/2)O₃ ceramics can find applications in microwave devices requiring low sintering temperature.     

Electrical conductivity of Bi<Subscript>2</Subscript>O<Subscript>3</Subscript>-Tm<Subscript>2</Subscript>O<Subscript>3</Subscript>-Nb<Subscript>2</Subscript>O<Subscript>5</Subscript> solid solutions

New solid solutions, Bi_2?x?y Tm _x Nb _y O_3+δ, with tetragonal and cubic structures have been synthesized in the Bi₂O₃-Tm₂O₃-Nb₂O₅ system, and their electrical conductivity has been measured at temperatures from 670 to 1020 K. The 1020-K conductivity of the tetragonal solid solution Bi_1.8Tm_0.15Nb_0.05O_3+δ is comparable to that of Bi_1.75Tm_0.25O₃, the best conductor in the Bi₂O₃-Tm₂O₃ system.     

Thermal conductivity of Sb<Subscript>2</Subscript>Te<Subscript>3</Subscript>-Gd<Subscript>2</Subscript>Te<Subscript>3</Subscript>-Bi<Subscript>2</Subscript>Te<Subscript>3</Subscript> solid solutions

We have measured the thermal conductivity of Bi₂Te₃-Sb₂Te₃-Gd₂Te₃ solid solutions at temperatures from ～80 to 300 K and have determined the electronic and lattice components of their total thermal conductivity and the contributions of Sb₂Te₃ and Gd₂Te₃ to their thermal resistance. The results indicate that heat in these materials is transported largely by phonons and that three-phonon processes play a key role in determining the lattice thermal conductivity of the solid solutions.     

Synthesis and microwave absorption property of ternary composites: polyaniline/CoFe<Subscript>2</Subscript>O<Subscript>4</Subscript>/Ba<Subscript>3</Subscript>Co<Subscript>2</Subscript>Fe<Subscript>24</Subscript>O<Subscript>41</Subscript>

Polyaniline (PANI)/CoFe₂O₄/Ba₃Co₂Fe₂₄O₄₁ composite was prepared by an in-situ polymerization method. The phase structure, morphology and magnetic properties of the as-prepared PANI/CoFe₂O₄/Ba₃Co₂Fe₂₄O₄₁ composite were characterized by XRD, FT-IR, SEM, TEM, and VSM, respectively. The microwave absorption properties of the composite were investigated by using a vector network analyzer in the 2–18 GHz frequency range. The results show that the maximum reflection loss value of the PANI/CoFe₂O₄/Ba₃Co₂Fe₂₄O₄₁ composite reaches ?30.5 dB at 10.5 GHz with a thickness of 3 mm and the bandwidth of reflection loss below ?10 dB reaches up to 1.2 GHz. The excellent microwave absorption properties of the as-prepared PANI/CoFe₂O₄/Ba₃Co₂Fe₂₄O₄₁ composite due to the enhanced impedance match between dielectric loss and magnetic loss.     

Luminescence studies on Eu<Superscript>2+</Superscript> and Tb<Superscript>3+</Superscript> doped Ca<Subscript>2</Subscript>MgSi<Subscript>2</Subscript>O<Subscript>7</Subscript> phosphors

Eu²⁺ and Tb³⁺ doped Ca₂MgSi₂O₇ phosphors were synthesized by conventional solid-state reaction. The phase formation was confirmed by X-ray powder diffraction technique and refined lattice parameters were calculated by rietveld refinement process using Celref v3. The photoluminescence (PL) excitation and emission spectra were investigated. The phosphors exhibited broaden green emitting luminescence peaking at 520 nm when excited at 374 nm source. Morphological studies were carried out using Scanning electron microscopy (SEM) images of the sample with optimum PL emission. The dependence of photoluminescence intensity on co-dopant concentration and the kinetic parameters were also reported. Time resolved fluorescence spectroscopy (TRFS) is used to investigate the decay in luminescence signals with respect to time. The sample proved to be a good long lasting material, which makes it useful in emergency signs, textile printing, textile exit sign boards and electronic instrument dial pads etc.     

Ionic conductivity in the Lu<Subscript>2</Subscript>O<Subscript>3</Subscript>-TiO<Subscript>2</Subscript> system

Nanocrystalline Lu₂O₃-TiO₂ (33.3–44 mol % Lu₂O₃) materials with a partially disordered pyrochlore structure, prepared via heat treatment in the range 1400–1750°C, are found to possess high oxygen ionic conductivity. Their 740°C conductivity is 10^-3 to 10^-2 S/cm, depending on the heat-treatment temperature and composition, which is comparable to that of the well-known fluorite solid electrolyte ZrO₂-9 mol % Y₂O₃.Translated from Neorganicheskie Materialy, Vol. 41, No. 3, 2005, pp. 324–331.Original Russian Text Copyright © 2005 by Shlyakhtina, Mosunov, Stefanovich, Knotko, Karyagina, Shcherbakova.This revised version was published online in April 2005 with a corrected cover date.This revised version was published online in April 2005 with a corrected cover date.     

Dielectric properties and electrical conductivity of ZrO<Subscript>2</Subscript>-CeO<Subscript>2</Subscript> ceramics

ZrO₂-CeO₂ (10, 18, and 23 mol % CeO₂) solid solutions have been synthesized via coprecipitation. The powders have been sintered at 1875 K, and the electrical conductivity and dielectric properties of the resultant ceramics have been studied. The dielectric relaxation observed in the ceramics can be understood in terms of ionic transport accompanied by the formation of dipoles relaxing in an ac electric field.     

Synthesis,crystal structure,and proton conductivity of KFe(H<Subscript>2</Subscript>P<Subscript>2</Subscript>O<Subscript>7</Subscript>)<Subscript>2</Subscript>

KFe H₂P₂O7)₂ is synthesized at 443 K in molten polyphosphoric acids containing K and Fe ions, and its crystal structure is determined: triclinic unit cell with a = 4.9974(6) Å, b = 7.4766(9) Å, c = 7.8185(9) Å, = 82.29(2)°, = 83.37(2)° , = 74.13(2)° ; Z = 1, sp. gr. P . The structure is made up of infinite ribbons formed by corner-shared PO₄ tetrahedra and FeO₆ octahedra, with the K atoms in between. Neighboring ribbons are linked by hydrogen bonds. The proton conductivity of potassium iron(III) dihydrogen diphosphate is rather low.Translated from Neorganicheskie Materialy, Vol. 41, No. 1, 2005, pp. 74–77. Original Russian Text Copyright © 2005 by Chudinova, Murashova, Ilyukhin, Tarnopolskii, Yaroslavtsev.     

Complex permittivity and electromagnetic interference shielding properties of Ti<Subscript>3</Subscript>SiC<Subscript>2</Subscript>/polyaniline composites

Ti₃SiC₂/insulating polyaniline (Ti₃SiC₂/PANI) composites were prepared by solution blending and subsequently by hot-pressing process. The dielectric permittivity and electromagnetic interference (EMI) shielding effectiveness (SE) of the composites were determined in the frequency range of 8.2–12.4 GHz (X-band). Both real and imaginary permittivities increase with the increasing Ti₃SiC₂ content, and which are attributed to the enhanced displacement current and conduction current. The EMI SE of the composites can be greatly improved by addition of Ti₃SiC₂ filler, which may be ascribed to the increase of electrical conductivity of the composites. It is also found that the reflection of electromagnetic radiation is a dominant mechanism for EMI shielding of the composite. An average EMI SE of 23 dB can be achieved in the X-band range for the composite with 25 wt% Ti₃SiC₂ content, which shows the potential of the Ti₃SiC₂/PANI composites as EMI shielding materials for commercial applications.     

Microstructure and properties of lead-free (Bi<Subscript>1/2</Subscript>Na<Subscript>1/2</Subscript>)TiO<Subscript>3 </Subscript>based piezoelectric ceramics doped with different cations

Different cations doped lead-free piezoelectric (Bi_1/2Na_1/2)TiO₃ ceramics with the general formula Na_0.4995Bi_0.4995Ba_0.001Ti_0.998M_0.002O₃ (M = Nb, Ta, and Sb) were fabricated. The effects of processing parameters and doping on phase content, microstructure, dielectric and piezoelectric properties of the materials were discussed. Experimental results show that Nb doped (Bi_1/2Na_1/2)TiO₃ exhibits superior polarization performance over the existing lead-free ceramics with a d₃₃ value of 122 pC/N obtained when poled at 60 kV/cm at room temperature. The best piezoelectric properties were achieved in (Bi_1/2Na_1/2)TiO₃ doped with Ta having a measured d₃₃ value of 164 pC/N for samples poled at 100 °C under the applied field of 50 kV/cm.     

Thermoelectric properties of WO<Subscript>3</Subscript>-based ceramics doped with Co<Subscript>2</Subscript>O<Subscript>3</Subscript>

Tungsten trioxide (WO₃) doped with cobalt sesquioxide (Co₂O₃) was prepared by a conventional mixed oxide processing route and the thermoelectric properties were studied from 300 up to 1,000 K. The addition of Co₂O₃ to WO₃ resulted in an increase in both the grain size and porosity, indicating that Co₂O₃ promotes the grain grown of WO₃. The magnitude of the electrical conductivity (σ) and the absolute value of the Seebeck coefficient (|S|) depended strongly on the Co₂O₃ content. As for the power factor (σS ² ), the 5.0 mol% sample has the maximum value of the power factor which is 0.12 μWm⁻¹K⁻² at 873 K.     

Lithium ion conductivity of LiLaO<Subscript>2</Subscript>-Li<Subscript>2</Subscript>ZrO<Subscript>3</Subscript> solid solutions

The limits of the LiLaO₂-and Li₂ZrO₃-based solid solutions in the LiLaO₂-Li₂ZrO₃ system have been determined: 0–10 mol % Li₂ZrO₃ and 0–5 mol % LiLaO₂, respectively. We have studied the transport properties (electronic conductivity, temperature and composition dependences of conductivity and activation energy) of lithium lanthanate and the solid solutions in the LiLaO₂-Li₂ZrO₃ system. Conduction in LiLaO₂ is likely due to lithium ion transport through a polyhedral network.     

Flux growth and spectroscopic studies of LiBaB<Subscript>9</Subscript>O<Subscript>15</Subscript> single crystal

Single crystal of LiBaB₉O₁₅ for the first time has been grown from a Li₂Mo₃O₁₀ flux by the top-seeded growth method. Details on the preparation and growth procedures are discussed. The phase structure of the as-grown crystal was determined by X-ray powder diffraction (XRD). The frequencies of the vibrational modes of the crystal were obtained from Infrared and Raman spectrum measurements. The results show that the obtained crystal is well-crystallized and indexed as a trigonal crystal system with lattice parameters of a = b=10.95053 Å, c = 16.88215 Å, and V = 1753.19 Å³. The observed frequencies were assigned on the basis of the BO₃ and BO₄ vibrations, and correlations with previous data reported for the similar compounds. On the basis of the XRD data and interfacial angle measurements, the as-grown crystal was found to be bounded by the (110), (113), and (101) planes. The seed crystal used for producing the crystal was oriented along the [100] direction.