Phase Equilibria of the La2O3-SrO-CuO System at 950°C and 10 kbar

Phase equilibria of the La₂O₃-SrO-CuO system have been determined at 950°C and 10 kbar (1 GPa). Stable phases at the apices of the ternary phase diagram are CuO, La₂O₃, and SrO. Stable intermediate phases are La₂CuO₄ in the LaO_1.5-CuO binary and Sr₂CuO₃, SrCuO₂, and Sr₁₄Cu₂₄O₄₁ in the CuO-SrO binary. The La_2-xSr _x CuO_4-δ solid solution is stable where 0.0 ≤ x ≤ 1.3, the La_2-xSr_1+xCu₂O_6+δ solid solution is stable where 0.0 ≤ x ≤ 0.2, the La_8-xSr _x Cu₈O_20-δ solid solution is stable where 1.3 ≤ x ≤ 2.7, the La _x Sr_14-x-Cu₂₄O₄₁ solid solution is stable where 0 ≤ x ≤ 6, and the La_1+xSr_2-xCu₂O_5.5+δ phase is stable where 0.04 ≤ x ≤ 0.16. The La₂O₃-SrO-CuO phase diagram at 950°C and 10 kbar is almost identical to that determined by other authors at 950°C and 1 atm, in terms of phase stability and solid-solution ranges.     

30 kbar Phase Equilibria of the La2O3–SrO–CuO System at 950°C

Phase equilibria of the La₂O₃–SrO–CuO system have been determined at 950°C at 30 kbar (3 GPa). Stable phases at the apexes of the ternary phase diagram are CuO, La₂O₃, and SrO. Stable intermediate phases are La₂, CuO₄ and La₂Cu₂O₅ in the LaO_1.5–CuO binary and Sr₂CuO₃, SrCuO₂, and Sr₁₄Cu₂₄O₄₁ in the CuO–SrO binary. The La_{2– x} Sr _x -CuO_4–δ solid solution is stable for 0.00 is ≤ x ≤ 1.29, the La_{2– x} Sr_{1+ x} Cu₂O_6+δ solid solution is stable for 0.03 ≤ x ≤0.20, the La_{2– x} Sr _x Cu₂O_5–δ solid solution is stable for 0.00 ≤ x ≤1.08, and the La _x Sr_{14– x} Cu₂₄O₄₁ solid solution is stable for 0.00 ≤ x ≤ 6.15. The 30 kbar phase diagram differs from the 1 atm (0.1 MPa) and 10 kbar (1 GPa) results principally in the absence of La_{1– x} Sr_{2+ x} Cu₂O_5.5+δ as a stable phase and the extended range of the La_{2– x} Sr _x Cu₂O_5–δ solid solution at 30 kbar.     

Superconducting Properties of Barium-Doped (Bi,Pb)2Sr2Ca2Cu3Ox Glass-Ceramics

The Ba-doped superconducting (Bi,Pb)₂Sr_{2- x} Ba _x Ca₂Cu₃O _y and (Bi,Pb)₂Sr₂Ca_{2- x} Ba _x Cu₃O _y (0 ≦ x ≦ 1.0) were prepared by using a melt-quenching method, and the effect of Ba additions on the glass-forming ability and the crystalline phase was examined. The glass-forming ability was not improved by substitution of Ba for Sr or Ca, and particularly BaPbO₃ as well as CaO was observed in the melt-quenched sample of (Bi,Pb)₂SrBaCa₂Cu₃O _y . BaPbO₃ crystals were precipitated in all glass-ceramics with Ba substituted for Sr or Ca. The partial substitution of Ba substituted for Sr was effective for the formation of the high- T _c phase, and (Bi,Pb)₂Sr_1.4Ba_0.6Ca₂Cu₃O _y glass-ceramics obtained by annealing at 830°C for 100 h exhibited superconductivity with a T _c of 103 K, although BaPbO₃ and the low- T _c phase were still largely present.     

Effect of Praseodymium on Superconductivity and Magnetism in Y1–xPrxBa2Cu4O8 Prepared by Nitrite Pyrolysis Method

X-ray diffraction patterns show that most samples of Y_1-x Pr_xBa₂Cu₄O₈ examined in the present study contained a single YBa₂ Cu₄O₈ (1-2-4) superconductive phase for x<0.7.Lattice parameters a and b increased with Pr concentration, suggesting that most of the Pr is trivalent in Y_1-x Pr_x-Ba₂Cu₄O₈. The zero-resistance temperature, T _co, decreases monotonically from 80 K at x=0 to 12 K at x=0.65, and superconducting transition widths tend to broaden for x>0. The room-temperature resistivity changes linearly until x=0.7 and increases abruptly at x=-0.75. The critical concentration, x_cr, thus was estimated to be 0.7. The effective magnetic moments of Pr in Y _1-x Pr_xBa₂Cu₄O₈ were 3.63., 3.35, and 3.23, μ_B for x=0.2, 0.4 and 0.6, respectively. In the R_0.8 Pr_0.2Ba₂Cu₄O₈ system, the depression of T_c weakly depends on the ionic radius of rare-earth elements. Similarities and differences between Y _1-x Pr_xBa₂Cu₄O₈ and Y_1-xPr_x-Ba₂Cu₃O_7-y also were noted and are discussed in this paper.     

Alignment of YBa2Cu3O7-x and Ag─YBa2Cu3O7-x Composites at ∼930°C by Eutectic Formation

The present work describes a new technique to synthesize aligned YBa₂Cu₃O_{7- x} and Ag─YBa₂Cu₃O_{7- x} superconducting composites from Ba- and Cu-deficient compositions (relative to YBa₂Cu₃O_{7- x} ) plus BaCuO₂. For YBa₂Cu₃O_{7- x} , high transition temperature midpoint T_c (91 K), temperature of zero resistivity T ₀ (90 K), and critical current density J_c (>3000 A°Cm⁻² at 77 K) were achieved by using this technique. This procedure provides the potential for using a reliable and reproducible densification and alignment technique alternative to partial or full melting. The composite is highly aligned, with an average grain size of ∼1 to 2 mm and domains of width greater than 5 mm. The initial phase assemblage consists of YBa₂Cu₃O_{7- x} (123) as the major phase plus YBa₂CuO₅ (211) CuO as minor phases. The BaCuO₂ is added to the Ba- and Cu-deficient starting composition in order to assist in the formation of a CuO-rich liquid as well as to compensate for the Ba and Cu deficiences in 123. Since the liquid forms at ∼900°C and is compatible with 123, it can be used to facilitate alignment of 123 at ∼930°C. The addition of Ag to the system results in eutectic formation with the (solidified) liquid, substantial filling of the pores during sintering, and improved alignment.     

Phase Equilibria and Crystal Chemistry in the Quaternary System Ba-Sr-Y-Cu-O in Air

Studies in the Sr-Y-Cu-O and Ba-Sr-Y-Cu-O systems have revealed that Sr will substitute for Ba in (Ba,Sr)₂YCu₃O_{6+ x} up to about 60%. There are no ternary compounds in the Sr-Y-Cu-O system equivalent to the three ternary phases in the Ba system. A new binary phase, "Sr₁₄Cu₂₄O₄₁"(CuO ∼ 63.158 mol%), was found which forms a solid solution with Y₂O₃ to a Sr:Y ratio of approximately 2:1. This phase can also incorporate considerable amounts of Ba and Ca and many other large ions.     

Phase Diagram of the BaO(BaCO3)-CaO-CuO System

The phase diagram of the BaO(BaCO₃)-CaO-CuO system, especially in the barium-rich region at 900°C in air, was studied. Two new different oxycarbonates were observed: Ba₈Ca_16/15Cu_64/15O_11.20(CO₃)_2.66and a solid-solution series with a chemical composition of Ba₂Ca _{x + y} Cu_{1+( x /2)- y} O_2+delta(CO₃)_{1- z} (where 0 ≤ to x ≤ to 2/39 and 0 ≤ to y ≤ to 16 x /5). The oxycarbonate solid solution was formed in a region of the compositional triangle Ba:Ca:Cu (in moles) = (2:0:1)-(39:1:20)-(65:7:28). The solid-solution structure had P 4/ mmm symmetry, with lattice parameters a similar/congruent a _pand c similar/congruent 2 a _p, where a _prepresents the perovskite cell. The Ba₈Ca_16/15Cu_64/15O_11.20(CO₃)_2.66compound, which had Pm 3 m symmetry with a lattice parameter a = 0.8116(2) nm, had no chemical-solubility range.     

Superconductivity in the (Yba2Cu3)1−xNaxO7−δ System

The (YBa₂Cu₃)_1−xNa_xO_7–δ system in the range of x = 0–0.8 was investigated. Experimental data suggest that the sodium doping with x 0.26 does not affect the critical transition temperature T_c, and the crystal structure maintains the orthorhombic lattice with a slightly smaller unit cell. However, sodium doping increases the sintering and grain growth kinetics, resulting in a higher superconducting phase volume and an enhanced Meissner effect. It also lowers the processing temperaturel. The experimental data also suggest that the sodium atoms diffuse into the superconducting YBa₂Cu₃O_7−δ crystallites, which stabilizes the orthorhombic phase. The transition temperature (ortho-rhombic to tetragonal) in sodium-doped materials increases with the increasing concentration of sodium.     

Retrograde Densification of Calcined and Glass Precursors of Approximate (Bi,Pb)2Sr2Ca2Cu3O10 Stoichiometry

Retrograde densification of pelletized calcines and glasses having an approximate (Bi,Pb)₂Sr₂Ca₂Cu₃O₁₀ starting stoichiometry and sintered at ∼850°C can be described by first-order rate equations. Retrograde densification in the calcine precursors was largely due to the development of open pores, and was approximately proportional to the concentration of the (Bi,Pb)₂Sr₂CaCu₃O₁₀ phase. In the glasses, retrograde densification is mainly caused by porosity accompanying the growth of a needlelike Sr─Ca─Cu─O phase, together with (Bi,Pb)₂Sr₂Ca₂Cu₃O₁₀ and (Bi,Pb)₂Sr₂CaCu₂O₈.     

Quantitative Electron Microscopy of (Bi,Pb)2Sr2Ca2Cu3O10+δ/Ag Multifilament Tapes During Initial Stages of Annealing

The microstructural and compositional evolution during initial annealing of a superconducting (Bi,Pb)₂Sr₂Ca₂Cu₃O_10+δ/Ag tape is studied using quantitative transmission electron microscopy. Special attention is devoted to the occurrence of Pb-rich liquids, which are crucial for the Bi₂Sr₂CaCu₂O_8+δ to (Bi,Pb)₂Sr₂Ca₂Cu₃O_10+δ transformation. Ca and/or Pb-rich (Bi,Pb)₂Sr₂CaCu₂O_8+δ grains dissolve into a liquid, which reacts with Ca-rich phases to increase the liquid's Ca-content. This leads to (Bi,Pb)₂Sr₂Ca₂Cu₃O_10+δ formation. Apparently, a Ca/Sr ratio of around 1 is sufficient to keep (Bi,Pb)₂Sr₂Ca₂Cu₃O_10+δ nucleation going. It is confirmed that Ag particles are transported from the Ag-sheath into the oxide core by the liquid and not by mechanical treatment of the tape.     

Phase Relations and Ordering in the Systems MgO-Y2O3-ZrO2 and CaO-MgO-ZrO2

The phase relations in the systems MgO-Y₂O₃-ZrO₂ and CaO-MgO-ZrO₂ were established at 1220° and 1420°C. The system MgO-Y₂O₃-ZrO₂ possesses a much-larger cubic ZrO₂ solid solution phase field than the system CaO-MgO-ZrO₂ at both temperatures. The ordered δ phase (Zr₃Y₄O₁₂) was found to be stable in the system ZrO₂-Y₂O₃ at 1220°C. Two ordered phases φ₁ (CaZr₄O₉) and φ₂ (Ca₆Zr₁₉O₄₄) were stable at 1220°C in the system ZrO₂-CaO. At 1420°C no ordered phase appears in either system, in agreement with the previously determined temperature limits of the stability for the δ, φ₁, and φ₂ phases. The existence of the compound Mg₃Y_zO₆ could not be confirmed.     

Liquid Formation at the Peritectic Temperature in Superconducting YBa2Cu3O7−x—Observation of a New Phase YBa4CuAIO8

In the system Y-Ba-Cu-O, partial melting of peritectically decomposing YBa₂Cu₃O_{7- x} (123) was used to produce a bulk material of high critical current density when the material was aligned. The liquid formation mechanism and its relation to reaction with alumina refractory was studied. A previously unreported phase of the approximate stoichiometric ratio Y:Ba:Cu:Al = 1:4:1:1 (YBa₄CuAlO₈) was detected. The crystal structure was determined to be tetragonal, with lattice parameters a ₀= b ₀= 1.651 nm, c ₀= 1.793 nm. The 1411 phase bears a close structural relationship to BaCuO₂.     

Phase Relations In The Pseudo-Ternary System La2O3–SrO–Fe2O3

The phase relations in the pseudo-ternary system La₂O₃–SrO–Fe₂O₃ have been investigated in air. Isothermal sections at 1100° and 1300°C are presented based on X-ray diffraction and thermal analysis of annealed samples. Extended solid solubility was observed for the compounds Sr _{n +1− v} La _v Fe _n O_{3 n +1−δ} ( n =1, 2, 3, and ∞) and Sr_{1− x} La _x Fe₁₂O₁₉, while only limited solubility of La in Sr_{4− z} La _z Fe₆O_13±δ was observed. At high Fe₂O₃ content, a liquid with low La₂O₃ content was stable at 1300°C.     

Phase Equilibria and Superconducting Properties of BiSr2YCu2O7 (1212 Phase)

Phase equilibria of the quasi-quaternary system BiO_1.5–SrO-YO_1.5–CuO have been studied at a temperature of 950°C in air, with special regard to the 1212 phase. The 1212 phase reveals only very small changes in the cation ratio. Single-phase samples exist for (Bi_0.24–0.36Cu_0.42-0.55)–Sr₂Y_1.27Cu₂O _y compositions. The bismuth-rich composition of the 1212 phase is in thermodynamic equilibrium with a liquid and the 2212 phase, whereas the copper-rich composition is in equilibrium with five other phases. The influence of combined calcium and lead doping also has been studied. Exceeding the calcium saturation of the 1212 phase increases the amount of 2212 as a secondary phase. Single-phase 1212 samples do not show any superconductivity in either the as-prepared or the post-annealed state. The only compositions with bulk superconductivity are those with calcium and lead doping after annealing at a temperature of 980°C. The superconductivity is attributed to the 2212 phase crystallizing from the melt during slow cooling.     

Pyrochlore Phases in the System ZnO–Bi2O3–Sb2O5: I. Stoichiometries and Phase Equilibria

Two cubic pyrochlore phases exist in the system ZnO–Bi₂O₃–Sb₂O₅. Neither has the supposed "ideal" stoichiometry, Zn₂Bi₃Sb₃O₁₄. One, P ₁, is a solid solution phase, Zn_{2+ x} Bi_{2.96−( x − y )}Sb_{3.04− y} O_14.04+δ where 0< x <0.13(1), 0< y <0.017(2) and a =10.4285(9)−10.451(1) Å. The other, P ₂, is a line phase, Zn₂Bi_3.08Sb_2.92O_13.92 with a =10.462(2) Å. Subsolidus phase relations at 950°C involving phases P ₁ and P ₂ in the ZnO–Bi₂O₃–Sb₂O₅ phase diagram have been determined.     

Quaternary Compounds Prepared in a CaO–Y2O3–SnO2 System

Compounds in a CaO–Y₂O₃–SnO₂ system were prepared by a solid-state reaction at 1673 K. The phase relation in this system was investigated by powder X-ray diffraction. Besides the previously reported ternary compounds, CaSnO₃, Ca₂SnO₄, Y₂Sn₂O₇, and a quaternary compound Ca_0.4Y_1.2Sn_0.4O₃, solid-solution series of Ca_{2− x} Y_{2 x} Sn_{1− x} O₄ with 0≤ x ≤0.5, and Ca_{1− y} Y_{2 y} Sn_{1− y} O₃ with 0≤ y ≤0.2 and 0.95≤ y ≤1.0 were found. The cell parameters of these solid-solution series were refined. The changes of rhombohedral cell parameters in the samples prepared in the range 0.565< y <0.714 of Ca_{1− y} Y_{2 y} Sn_{1− y} O₃ suggested the existence of solid solutions of Ca_0.4Y_1.2Sn_0.4O₃, although their single phases could not be prepared, except at y =0.6.     

Solid-Solution Ranges of the n= 2 and n= 3 Superconducting Phases in Bi2(SrxCa1 −x)n+1CunOy and the Effect on Tc

The cation solubility limits of the n = 2 and n = 3 superconducting phases in the Bi₂(Sr _x Ca_{1 − x} ) _{n +1}Cu _n O _y system were established along tie lines with compatible phases via electron probe microanalysis on bi- (or poly-) phasic samples prepared at 860°C. Pb additions (15 mol% of the Bi content) were used to facilitate formation of the n = 3 phase. In each case football-shaped volumes in composition space were established as the solubility limits which bordered on the nominal compositions 2212 or 2223 (Bi:Sr:Ca:Cu) with the long axis parallel to the Sr-Ca side of the quaternary (i.e., Sr-to-Ca intersolubility) but also extending toward Bi and Cu. This means that, for the most part, the superconducting phases are alkaline-earth deficient relative to the ideal 2212 and 2223 compositions. The Pb content in the 2223 phase is typically 10% of the Bi content. T _c variations could be correlated with variations in Sr or (Sr + Bi) content and the length of the c -axis parameter.     

Synthesis of High-Tc Dual-Phase Ag–YBa2Cu3O7–x Superconductor Composite Powders by Sol–Gel Process

Fine, homogeneous, dual-phase Ag–YBa₂Cu₃O_{7– x} composite powders were prepared by a simple colloidal sol–gel coprecipitation technique that was previously used for synthesis of single-phase YBa₂Cu₃O_{7– x} . Samples containing up to 60 wt% silver were synthesized. Silver neither reacted with nor degraded the YBa₂Cu₃O_{7– x} . The presence of silver was found to aid the oxygenation of the precursor during calcination to form orthorhombic YBa₂Cu₃O_{7– x} . Measurements made by ac magnetic susceptibility showed no significant degradation in transition temperature for samples containing up to 40 wt% silver.     

Spectroscopic Properties of Er3+-Doped Na2O–La2O3–Al2O3–SiO2 Glasses

Er³⁺-doped sodium lanthanum aluminosilicate glasses with compositions of (90− x )(0.7SiO₂·0.3Al₂O₃)· x Na₂O·8.2La₂O₃· 0.6Er₂O₃·0.2Yb₂O₃·1Sb₂O₃ (in mol%) ( x = 12, 20, 24, 40, 60 mol%) were prepared and their spectroscopic properties were investigated. Judd–Ofelt analysis was used to calculate spectroscopic properties of all glasses. The Judd–Ofelt intensity parameter Ω _t ( t = 2, 4, 6) decreases with increasing Na₂O. Ω₂ decreases rapidly with increasing Na₂O while Ω₄ and Ω₆ decrease slowly. Both the fluorescent lifetime and the radiative transition rate increase with increasing Na₂O. Fluorescence spectra of the ⁴ I _13/2 to ⁴ I _15/2 transition have been measured and the change with Na₂O content is discussed. It is found that the full width at half-maximum decreases with increasing Na₂O.     

Development of Nano-Composite Microstructures in ZrO2-Al2O3 via the Solution Precursor Method

Aqueous mixtures of zirconium acetate and aluminum nitrate were pyrolyzed and crystallized to form a metastable solid solution, Zr_{1- x} Al _x O_{2− x /2} ( x < 0.57). The initial, metastable phase partitions at higher temperatures to form two metastable phases, viz., t −ZrO₂+γ-Al₂O₃ with a nano-scale microstructure. The microstructural observations associated with the γ- →α-Al₂O₃ phase transformation in the t -ZrO₂ matrix are reported for compositions containing 10, 20, and 40 mol% A1₂O₃. During this phase transformation, the α-Al₂O₃ grains take the form of a colony of irregular, platelike grains, all with a common crystallographic orientation. The plates contain ZrO₂ inclusions and are separated by ZrO₂ grains. The volume fraction of A1₂O₃ and the heat treatment conditions influence the final microstructure. At lower volume fractions of A1₂O₃, the colonies coarsen to single, irregular plates, surrounded by polycrystalline ZrO₂. Interpenetrating microstructures produced at high volume fractions of A1₂O₃ exhibit very little grain growth for periods up to 24 h at 1400°C.