Piezoelectric Properties of (1−x)(Na0.5K0.5)NbO3–xAgSbO3 Lead-Free Ceramics

(1− x )(Na_0.5K_0.5)NbO₃– x AgSbO₃ lead-free piezoelectric ceramics were prepared by normal sintering. The effects of the AgSbO₃ on the phase structure and piezoelectric properties of the ceramics were systematically studied. These results show that the AgSbO₃-modified (K_0.50Na_0.50)NbO₃ lead-free piezoelectric ceramics form stable solution with orthorhombic structure, and the Curie temperature and the polymorphic phase transition of the ceramics decreased with increasing AgSbO₃. The result shows that the piezoelectric properties of the ceramics strongly depend on the AgSbO₃. The ceramics with x =0.05 possess optimum properties ( d ₃₃=192 pC/N, k _p=43%, T _c=348°C, T _o−t =145°C, ɛ_r∼632, and tan δ∼3.5%). These results indicate that the ceramic is a promising candidate material for lead-free piezoelectric ceramics.     

BiScO3 Doped (Na0.5K0.5)NbO3 Lead-Free Piezoelectric Ceramics

Lead-free potassium sodium niobate-based piezoelectric ceramics (1− x )(Na_0.5K_0.5)NbO₃– x BiScO₃ (KNN–BS) ( x =0∼0.05) have been prepared by an ordinary sintering process. Single perovskite phase of KNN–BS exhibits an orthorhombic symmetry at x <0.015 and pseudocubic symmetry at x >0.02, separating by a MPB at 0.015≤ x ≤0.02. Piezoelectric and ferroelectric properties are significantly enhanced in the MPB, which are as follows: piezoelectric constant d ₃₃=203 pC/N, planar coupling coefficient k _p=0.36, remnant polarization P _r=24.4 μC/cm². These solid solution ceramics look promising as a potential lead-free candidate materials.     

Microstructure and Electrical Properties of [(K0.50Na0.50)0.95−xLi0.05Agx](Nb0.95Ta0.05)O3 Lead-Free Ceramics

[(K_0.50Na_0.50)_{0.95− x} Li_0.05Ag _x ](Nb_0.95Ta_0.05)O₃ (KNLNANT- x ) lead-free piezoelectric ceramics were prepared by normal sintering. Effects of the Ag content on the microstructure and electrical properties of KNLNANT- x ceramics were systematically investigated. It is found that the ceramics with x =0.03 exhibit relatively good electrical properties along with high Curie temperature: ( d ₃₃∼252 pC/N, T _c∼438°C, k _p∼45.4%, P _r∼30.1 μC/cm², E _c∼13.8 kV/cm, ɛ_r∼1030, and tan δ∼2.6%). The related mechanism for enhanced electrical properties of the ceramics was also discussed. These results show that KNLNANT-0.03 ceramic is a promising candidate material for high temperature lead-free piezoelectric ceramics.     

K/Na Ratio Dependence of the Electrical Properties of [(KxNa1−x)0.95Li0.05](Nb0.95Ta0.05)O3 Lead-Free Ceramics

[(K _x Na_{1− x} )_0.95Li_0.05](Nb_0.95Ta_0.05)O₃ (K _x NLNT) ( x= 0.40–0.60) lead-free piezoelectric ceramics were prepared by conventional solid-state sintering. The effects of K/Na ratio on the dielectric, piezoelectric, and ferroelectric properties of the K _x NLNT ceramics were studied. The experimental results show that the electrical properties strongly depend on the K/Na ratio in the K _x NLNT ceramics. The K _x NLNT ( x =0.42) ceramics exhibit enhanced properties ( d ₃₃∼242 pC/N, k _p∼45.7%, k _t∼47%, T _c∼432°C, T _o−t =48°C, ɛ_r∼1040, tanδ∼2.0%, P _r∼26.4 μC/cm², E _c∼10.3 kV/cm). Enhanced electrical properties of the K _x NLNT ( x =0.42) ceramics could be attributed to the polymorphic phase transition near room temperature. These results show that the K _x NLNT ( x =0.42) ceramic is a promising lead-free piezoelectric material.     

Microstructure and Electrical Properties of (K, Na, Li)NbO3–Pb(Zr,Ti)O3 Piezoelectric Ceramics

A new type (1− x )(K_0.485Na_0.485Li_0.03)NbO₃– x Pb(Zr_0.53Ti_0.47)O₃ piezoelectric ceramics was fabricated by conventional ceramics sintering technique. Their microstructure and electrical properties of the ceramics were also studied. X-ray diffraction and scanning electron microscopy patterns indicate that all ceramics samples exhibit a pure perovskite and highly dense structure, and the coexistence of the tetragonal and orthorhombic phases is formed; The ceramic with x =0.75 exhibits the following excellent properties: d ₃₃=363 pC/N, k _p=63%, Q _m=142, ɛ_r=1590, tan δ=1.70%, P _r=28.6 μC/cm², E _c=0.89 kV/mm, T _c=295°C. These results indicate that the ceramic is a promising candidate for piezoelectric ceramics in practical applications.     

Phase Transitions and Electrical Properties of (Na1−xKx)(Nb1−ySby)O3 Lead-Free Piezoelectric Ceramics With a MnO2 Sintering Aid

Lead-free piezoelectric ceramics (Na_{1− x} K _x )(Nb_{1− y} Sb _y )O₃+ z mol% MnO₂ have been prepared by a conventional solid-state sintering technique. Our results reveal that Sb⁵⁺ diffuses into the K_0.5Na_0.5NbO₃ lattices to form a solid solution with a single-phase orthorhombic perovskite structure. The partial substitution of Sb⁵⁺ for B-site ion Nb⁵⁺ decreases the paraelectric cubic-ferroelectric tetragonal phase transition ( T _c) and the ferroelectric tetragonal-ferroelectric orthorhombic phase transition ( T _O–F), and retains strong ferroelectricity. A small amount of MnO₂ is enough to improve the densification of the ceramics. The co-effects of MnO₂ doping and Sb substitution lead to significant improvements in ferroelectric and piezoelectric properties. The ceramics with x =0.45–0.525, y =0.06–0.08, and z =0.5–1 exhibit excellent ferroelectric and piezoelectric properties: d ₃₃=163–204 pC/N, k _P=0.47–0.51, k _t=0.46–0.52, ɛ=640–1053, tan δ=1.3–3.0%, P _r=18.1–22.6 μC/cm², E _c=0.72–0.98 kV/mm, and T _C=269°–314°C.     

Phase Transitional Behavior and Piezoelectric Properties of Lead-Free (Na0.5K0.5)NbO3–(Bi0.5K0.5)TiO3 Ceramics

(1− x )(Na_0.5K_0.5)NbO₃–(Bi_0.5K_0.5)TiO₃ solid solution ceramics were successfully fabricated, exhibiting a continuous phase transition with changing x at room temperature from orthorhombic, to tetragonal, to cubic, and finally to tetragonal symmetries. A morphotropic phase boundary (MPB) between orthorhombic and tetragonal ferroelectric phases was found at 2–3 mol% (Bi_0.5K_0.5)TiO₃ (BKT), which brings about enhanced piezoelectric and electromechanical properties of piezoelectric constant d ₃₃=192 pC/N and planar electromechanical coupling coefficient k _p=45%. The MPB composition has a Curie temperature of 370°–380°C, comparable with that of the widely used PZT materials. These results demonstrate that this system is a promising lead-free piezoelectric candidate material.     

High Piezoelectric and Dielectric Properties of La-Doped 0.3Pb(Zn1/3Nb2/3)O3–0.7Pb(ZrxTi1−x)O3 Ceramics Near Morphotropic Phase Boundary

La-doped 0.3Pb(Zn_1/3Nb_2/3)O₃–0.7Pb(Zr _x Ti_{1− x} )O₃ ( x =0.5–0.53) piezoelectric ceramics with pure perovskite phase were synthesized by a two-step hot-pressing route. The piezoelectric properties of various compositions near the morphotropic phase boundary (MPB) were systematically investigated. Not only was the exact MPB of this system determined via X-ray diffractometry analysis, but also the peak of piezoelectric properties was found near the MPB. The optimum piezoelectric properties of this series were observed in the specimen with Zr/Ti=51/49. The piezoelectric coefficient ( d ₃₃) and electromechanical coupling factor ( k _p) were 845 pC/N and 0.70, respectively, which have not been reported in this system so far. Large permittivity (ɛ_r=4088) and permittivity maximum (ɛ_m=29 500) were also obtained for the poled specimens. The temperatures ( T _max) of the permittivity maxima ranged from 206° to 213°C with various Zr/Ti ratios.     

Microstructure and Piezoelectric Properties of (1−x)(Na0.5K0.5)NbO3–xLiNbO3 Ceramics

(1− x )(Na_0.5K_0.5)NbO₃– x LiNbO₃ [(1− x )NKN– x LN] ceramics were produced by the conventional solid-state sintering method, and their microstructure and piezoelectric properties were investigated. The formation of the liquid phase and K₆Li₄Nb₁₀O₃₀ second phase that were observed in the (1− x )NKN– x LN ceramics was explained by the evaporation of Na₂O during the sintering. A morphotropic phase boundary (MPB) was observed in the specimens with 0.05< x <0.08. Promising piezoelectric properties were obtained for the specimens with x =0.07. Therefore, the piezoelectric properties of this 0.93NKN–0.07LN ceramic were further investigated and were found to be influenced by their relative density and grain size. In particular, grain size considerably affected the d ₃₃ value. Two-step sintering was conducted at different temperatures to increase the grain size. Piezoelectric properties of d ₃₃=240 (pC/N) and k _p=0.35 were obtained for the 0.93NKN–0.07LN ceramics sintered at 1030°C and subsequently annealed at 1050°C.     

Influences of Sintering Temperature on Piezoelectric, Dielectric and Ferroelectric Properties of Li/Ta-Codoped Lead-Free (Na,K)NbO3 Ceramics

Li/Ta-codoped lead-free (Na,K)NbO₃ ceramics with a nominal composition of [(Na_0.535K_0.480)_0.942Li_0.058](Nb_0.90Ta_0.10)O₃ were synthesized normally at 1070°–1100°C. The XRD patterns of all samples show a single pervoskite structure with tetragonal symmetry. Although MPB separating the orthorhombic and tetragonal symmetries was absent, the maximum piezoelectric coefficient ( d ₃₃), electromechanical coupling coefficient ( k _p), Curie temperature ( T _c), and remanent polarization ( P _r) were optimized as 216 pC/N, 38.1%, 445°C, and 8.73 μC/cm², respectively.     

Phase Transformation and Tunable Piezoelectric Properties of Lead-Free (Na0.52K0.48−xLix)(Nb1−x−ySbyTax)O3 System

Lead-free (Na_0.52K_{0.48− x} )(Nb_{1− x − y} Sb _y )O₃- x LiTaO₃ (NKNS–LT) piezoelectric ceramics have been fabricated by ordinary sintering. A special attention was paid to the composition design through which the dielectric and piezoelectric properties of the (Li, Ta, Sb) modified NKN systems were significantly promoted. A property spectrum was generated with a particular discussion on the relationship between the Sb content, the LT content, the polymorphic phase transition, and the electrical properties and their temperature stability. Excellent and tunable electrical properties of d ₃₃=242–400 pC/N, k _p=36%–54%,     , and T _c=230°–430°C demonstrate a tremendous potential of the compositions studied for device applications.     

Phase Structure, Microstructure, and Electrical Properties of Sb-Modified (K, Na, Li) (Nb, Ta) O3 Piezoelectric Ceramics

Lead-free (K_0.44Na_0.52Li_0.04)(Nb_{0.80− x} Ta_0.20Sb _x )O₃ piezoelectric ceramics were prepared by the ordinary sintering method. The much higher Pauling electronegativity of Sb compared with Nb makes the ceramics more covalent. By increasing x from 0.00 to 0.06, the phase structure of the ceramics changed from the tetragonal to the pseudocubic phase, and both the bands in the Raman scattering spectra shifted to lower frequency numbers. The grain growth of the ceramics was improved by substituting Sb⁵⁺ for Nb⁵⁺. By increasing x , the dielectric properties were optimized and the variation of dielectric constants before and after poling became smaller. Only the tetragonal–cubic phase transition was observed above room temperature in all the ɛ_r– T curves. The degree of diffuseness increased from 1.29 at x =0.00 to 1.96 at x =0.06, indicating that the ceramics at x =0.06 changed to an approximate ideal relaxor ferroelectric. The temperature dependences of f _r and k _p became better by increasing x properly. Significantly, the ceramics with x between 0.00 and 0.04 had high density and outstanding electrical properties ( d ₃₃=241–272pC/N, k _p=0.42–0.52, ɛ_r=1258–1591, tan δ=0.015–0.025, T _c=280°–355°C, E _c=10.62–12.60 kV/cm, and P _r=16.19–20.13 μC/cm²). Besides, the underlying mechanism for variations of the electrical properties due to Sb⁵⁺ substitution was explained in this work.     

Crystal Structure and Ferroelectric Properties of (Bi0.5Na0.5)TiO3–Ba(Zr0.05Ti0.95)O3 Piezoelectric Ceramics

The crystal structure and ferroelectric properties of (1− x )(Bi_0.5Na_0.5)TiO₃– x Ba(Zr_0.05Ti_0.95)O₃ (BNBZT x, x ≤12%) lead-free piezoelectric ceramics were studied. The distance between the centers of cations and anions ( d _c–a) as well as the lattice parameters was carefully investigated by Rietveld refinement on X-ray diffraction patterns. It was found that the crystal phase was determined by the amount of Ba(Zr_0.05Ti_0.95)O₃ added, whereas the pure rhombohedral and tetragonal phases are observed in compositions containing x ≤4 and x ≥8%, respectively. A rhombohedral–tetragonal morphotropic phase boundary (MPB) was found at around BNBZT6, which showed a maximum and minimum d _c–a at its rhombohedral and tetragonal phases, respectively. According to the present study, the ferroelectric properties show a strong dependence on their crystal phases. For the single-phase compositions, the remanent polarization ( P _r) generally increased with the value of d _c–a while their coercive fields ( E _c) were determined by their lattice parameters. Nevertheless, the behavior in P _r and E _c for MPB compositions is related to not only the lattice parameter but also the composed phases.     

Enhanced Piezoelectric Properties in Mn-Doped 0.98K0.5Na0.5NbO3–0.02BiScO3 Lead-Free Ceramics

Mn-doped 0.98K_0.5Na_0.5NbO₃–0.02BiScO₃ (0.98KNN–0.02BS) lead-free piezoelectric ceramics have been prepared by a conventional sintering technique and the effects of Mn doping on the phase structure and piezoelectric properties of the ceramics have been studied. Our results reveal that a small amount of Mn can improve the densification of the ceramics effectively. Because of the high densification, fine grain, and Mn doping effects, the piezoelectric and dielectric properties of the ceramics are improved considerably. Very good piezoelectric and dielectric properties of d ₃₃=288 pC/N, k _p=0.46, ɛ_r=1591, and T _C=328°C were obtained for the 0.98KNN–0.02BS ceramics doped with 0.8 mol% Mn. Therefore, the 0.98KNN–0.02BS ceramics containing a small amount of Mn are a good candidate material for lead-free piezoelectric ceramics.     

Influence of Sintering Temperature on Grain Growth and Phase Structure of Compositionally Optimized High-Performance Li/Ta-Modified (Na,K)NbO3 Ceramics

Microstructure characteristics, phase transition, and electrical properties of (Na_0.535K_0.485)_0.926Li_0.074(Nb_0.942Ta_0.058)O₃ (NKN-LT) lead-free piezoelectric ceramics prepared by normal sintering are investigated with an emphasis on the influence of sintering temperature. Some abnormal coarse grains of 20–30 μm in diameter are formed in a matrix consisting of about 2 μm fine grains when the sintering temperature was relatively low (980°C). However, only normally grown grains were observed when the sintering temperature was increased to 1020°C. On the other hand, orthorhombic and tetragonal phases coexisted in the ceramics sintered at 980°–1000°C, whereas the tetragonal phase becomes dominant when sintered above 1020°C. For the ceramics sintered at 1000°C, the piezoelectric constant d ₃₃ is enhanced to 276 pC/N, which is a high value for the Li- and Ta-modified (Na,K)NbO₃ ceramics system. The other piezoelectric and ferroelectric properties are as follows: planar electromechanical coupling factor k _p=46.2%, thickness electromechanical coupling factor k _t=36%, mechanical quality factor Q _m=18, remnant polarization P _r=21.1 μC/cm², and coercive field E _c=1.85 kV/mm.     

Microstructure, Piezoelectric, and Ferroelectric Properties of Bi2O3-Added (K0.5Na0.5)NbO3 Lead-Free Ceramics

Lead-free piezoelectric (K_0.5Na_0.5)NbO₃– x wt% Bi₂O₃ ceramics have been synthesized by an ordinary sintering technique. The addition of Bi₂O₃ increases the melting point of the system and improves the sintering temperature of (K_0.5Na_0.5)NbO₃ ceramics. All samples show a pure perovskite phase with a typical orthorhombic symmetry when the Bi₂O₃ content <0.7 wt%. The phase transition temperature of orthorhombic–tetragonal ( T _{O − T} ) and tetragonal–cubic ( T _C) slightly decreased when a small amount of Bi₂O₃ was added. The remnant polarization P _r increased and the coercive field E _c decreased with increasing addition of Bi₂O₃. The piezoelectric properties of (K_0.5Na_0.5)NbO₃ ceramics increased when a small amount of Bi₂O₃ was added. The optimum piezoelectric properties are d ₃₃=140 pC/N, k _p=0.46, Q _m=167, and T _C=410°C for (K_0.5Na_0.5)NbO₃–0.5 wt% Bi₂O₃ ceramics.     

Effects of La on Dielectric and Piezoelectric Properties of Pb1−xLa2x/3(Nb0.95Ti0.0625)2 O6 Ceramics

Ceramics with the chemical compositions of Pb_{1− x} La_{2 x /3}(Nb_0.95Ti_0.0625)₂O₆ (0≤ x ≤0.060) (PLTN) were prepared by the conventional solid-state reaction method. X-ray diffraction analysis indicated that Ti and La doping not only decreased the rhombohedral–tetragonal phase transformation temperature, but also stabilized the orthorhombic phase of PLTN ceramics. All ceramics sintered at 1190°–1250°C had shown the pure orthorhombic ferroelectric phase. La doping suppresses grain growth and inhibits the formation of pores and cracks, resulting in an increase in relative density up to 97%. The amount of La doping to PLTN ceramics obviously affect ceramics' piezoelectric constant ( d ₃₃) and dielectric loss (tanδ). The sample with x =0.015 possesses high Curie temperature ( T _c=560°C), low dielectric loss (tanδ=0.0054), and excellent piezoelectric constant ( d ₃₃=92 pC/N), presenting a high potential to be used in high-temperature applications as piezoelectric transducers.     

Phase Transition and Ferroelectric Characteristics of Pb[(Mg1/3Nb2/3)1-xTix]O3 Ceramics Modified with La(Mg2/3Nb1/3)O3

The effects of 0–5 mol% addition of La(Mg_2/3Nb_1/3)O₃ (LMN) on the phase transition and ferroelectric behaviors of Pb[(Mg_1/3Nb_2/3)_1-xTi_x]O₃ (PMNT) ceramics with compositions near the morphotropic phase boundary (MPB) were studied. An evolution of structure from rhombohedral to tetragonal was found with increasing PbTiO₃ (PT) content across the MPB (at ∼32.5 mol% PT), and a coexistence of both rhombohedral and tetragonal phases was also found at the MPB. The dual-phase field extended toward the lower PT content side of the MPB, and, moreover, the rhombohedrality or tetragonality was reduced, especially for the compositions near the MPB, by the addition of La in PMNT. The ferroelectric transition was found to change from normal to diffuse as the La content increased and the compositions became more rhombohedral. In accordance with the structural evolution, the change of remanent polarization ( P _r) and coercive field ( E _c) also became gradually indistinct, and both P _r and E _c were reduced. For compositions near the MPB, both PMNT and La-modified PMNT had a similar electromechanical factor ( k _p) in a range around 0.55–0.60, but the mechanical quality factor ( Q _m) was significantly reduced for the La-modified PMNT. The piezoelectric coefficient ( d ₃₃), however, was largely improved with increasing La content in PMNT of compositions at MPB. A high value of d ₃₃∼ 815 pC/N was obtained for the 5-mol%-La-modified ceramics, but it was associated with a low value of Q _m.     

Microwave Dielectrics in the (La1/2Na1/2)TiO3–Ca(Fe1/2Nb1/2)O3 System

Dielectric properties of the system (1 − x)(La_1/2Na_1/2)TiO₃– _x Ca(Fe_1/2Nb_1/2)O₃, where 0.4 # x # 0.6, have been investigated at microwave frequencies. The temperature coefficient of resonant frequency (τ_f), nearly 0 ppm/°C, was realized at x = 0.58. These ceramics had perovskite structure and showed relatively low dielectric losses. A new dielectric material applicable to microwave devices having Q · f of 12000–14000 GHz and a dielectric constant (ε_r) of 59–60 has been obtained at 1300–1350°C for 5–15 h sintering.     

Compositional Dependence of Piezoelectric Properties in NaxK1−xNbO3 Lead-Free Ceramics Prepared by Spark Plasma Sintering

Lead-free piezoelectric Na _x K_{1− x} NbO₃ ( x =20–80 mol%) ceramics were fabricated using spark plasma sintering at a low temperature (920°C). All the Na _x K_{1− x} NbO₃ ceramics showed a similar orthorhombic phase structure, while the corresponding lattice parameters decreased from the KNbO₃ side to the NaNbO₃ side with increasing Na content. A discontinuous change in lattice parameter close to composition of 60 mol% Na indicated the presence of a transitional area that is similar to the morphotropic phase boundary (MPB) in Na _x K_{1− x} NbO₃ ceramics. The sintered density of the Na _x K_{1− x} NbO₃ ceramics decreased with increasing Na content, from a relative density of 99% for the K-rich side to 92% for the Na-rich side. The piezoelectric constant d ₃₃ and planar mode electromechanical coupling coefficient k _p showed a maximum value of 148 pC/N and 38.9%, respectively, due to the similar MPB effects in the PZT system.