VAE/PVC-VDC共混乳液的研究

此共混乳液采用乙烯－醋酸乙烯共聚物（ＶＡＥ）乳液和氯乙烯－偏氯乙烯共聚物（ＰＶＣ－ＶＤＣ）乳液以机械共混方法制得。考察了其微观形态、流变性及其成膜后的力学性能等，发现共混乳液具有一定的相容性，其拉伸强度与ＶＡＥ胶膜相比有很大的提高。     

共聚物对PVC／PE共混物相容性的作用

本实验室合成了丁二烯－ｂ－甲基丙烯酸甲酯共聚物（ＰＢＤ－ｂ－ＰＭＭＡ），氢化聚丁二烯段得到含聚乙烯结构的氢化聚丁二烯－ｂ－甲基丙烯酸甲酯共聚物（ＨＰＢＤ－ｂ－ＰＭＭＡ）作为聚氯乙烯／聚乙烯（ＰＶＣ／ＰＥ）共混物的增容剂。实验结果表明，共聚物增加了ＰＶＣ／ＰＥ体系的相容性。共混物中加入共聚物后，体系的冲击强度，断裂伸长率和拉伸强度都有提高。动态粘弹谱和扫描电镜也证实了共聚物的增容作用。共聚物使共混体     

固相法CPE增容PVC／LDPE共混体系的研究

通过力学性能试验、动态力学分析（ＤＭＡ）、电子显微镜观察，研究了固相法氯化聚乙烯（ＣＰＥ）对聚氯乙烯（ＰＶＣ）与低密度聚乙烯（ＬＤＰＥ）共混体系的增容作用。实验结果表明，ＣＰＥ的加入能明显改善ＰＶＣ／ＬＤＰＥ共混体系的相容性，显著提高共混物的力学性能，且低温氯化制得的ＣＰＥ的改善效果优于两段氯化制得的ＣＰＥ。电子显微镜观察表明，增容剂增加了共混体系相间相互作用或相界面粘附性，对共混体系的形态结构产     

EVA增容PVC／PE共混体系的研究

采用乙烯－醋酸乙烯酯共聚物（ＥＶＡ）作为聚氯乙烯（ＰＶＣ）／高密度聚乙烯（ＨＤＰＥ）共混物的增容剂，通过冲击实验、拉伸实验、动态力学分析和扫描电镜（ＳＥＭ），系统地研究了共混体系的性能与其形态结构之间的关系。结果表明，ＥＶＡ是ＰＶＣ／ＨＤＰＥ良好的增容剂，在一定范围内，ＥＶＡ与ＰＥ对ＰＶＣ有协同增韧效应     

HDPE／EVA共混体系的研究

采用ＤＳＣ，ＷＡＸＤ和力学性能测试，研究了ＨＤＰＥ／ＥＶＡ共混体系。结果表明，ＨＤＰＥ／ＥＶＡ共混体系是不相容的，但在共混组成中含有少量（＜１０％）的ＥＶＡ，力学性能下降很少，而加工性能得到改善，具有一定实用价值。     

EVA-g-MAH对PA6/EVA共混合金原位反应增容作用的研究

用乙烯－醋酸乙烯酯共聚物（ＥＶＡ）对尼龙６（ＰＡ６）进行增韧,加入乙烯－醋酸乙烯酯共聚物与马来酸酐的接枝物（ＥＶＡ－ｇ－ＭＡＨ）进行原位反应增容,在反应型双螺杆挤出机上实现反应增容共混过程,制备出了具有超韧性的ＰＡ６／ＥＶＡ／ＥＶＡ－ｇ－ＭＡＨ三元共混合金。探讨了ＥＶＡ－ｇ－ＭＡＨ对ＰＡ６／ＥＶＡ的原位反应及增容机理,用倍高扫描电镜考察了合金材料的亚微相态。结果表明,ＥＶＡ－ｇ－ＭＡＨ的加入使合金     

氯化聚乙烯在EVA/SAN体系中的增容研究

采用氯化聚乙烯作为乙烯醋酸乙烯酯共聚物／苯乙烯丙烯腈共聚物共混体系的增容剂,用力学性能,电镜等方法研究了ＥＶＡ／ＣＰＥ／ＳＡＮ三元体系的相容性。结果表明,由于ＣＰＥ与ＥＶＡ,ＳＡＮ均有一定程度的相互作用,在ＥＶＡ／ＣＰＥ／ＳＡＮ三元体系中ＣＰＥ存在于ＥＶＡ,ＳＡＮ的界面以减小总的界面能而起了增容作用,从而使该三元体系具有良好的综合力学性能。     

P(MMA-BA-MAA)／P(MMA-BA-VP)共聚物复合体系的氢键相互作用

通过乳液共聚合分别合成了两种具有互补结构的共聚物乳液：聚（甲基丙烯酸甲酯－丙烯酸丁酯－甲基丙烯酸聚Ｐ（ＭＭＡ－ＢＡ－ＭＭＡ）和聚（甲基丙烯酸甲酯－丙烯酸丁酯－乙烯基吡咯烷酮）Ｐ（ＭＭＡ－ＢＡ－ＶＰ）。通过^1H-NMR测定,研究了共聚物组成与单体投料组成的关系;通过ＦＲ－ＩＲ、ＤＳＣ、表 及力学性能测试,研究了Ｐ（ＭＭＡ－ＢＡ－ＭＭＡ）／Ｐ（ＭＭＡ－ＢＡ－ＶＰ）共聚物复合体系氢键相互作用及其对聚合物性能的影响,结果表明Ｐ（ＭＭＡ－ＢＡ－ＭＭＡ）／Ｐ（ＭＭＡ－ＢＡ－ＶＰ）共聚物复合体系存在氢键相互作用,氢键相互作用导致复合体系表面降低、拉伸强度提高。     

聚氧化乙烯与聚乙烯醇共混体系的研究

采用水溶液共混法制备共混物，研究了聚氧化乙烯与聚乙烯醇共混体系的相容性及共混体系中各组分的结晶性。实验结果表明，ＰＥＯ／ＰＶＡ共混物为不相容共混体系。ＰＶＡ分子间易于形成氢键是此共混体系不相容的主要原因。ＰＥＯ／ＰＶＡ共混体系为相分离结构，ＰＥＯ及ＰＶＡ皆可在各自的相区内形成结晶。体系中ＰＶＡ的存在不影响ＰＥＯ的结晶能力，共混体系在组成为５０／５０左右其力学性能有急剧变化，提示在此时发生了相倒转。     

HDPE/尼龙-6/EAA共混体系反应增容作用的研究EI

通过Ｂｒａｂｅｎｄｅｒ、ＤＳＣ、ＳＥＭ和力学性能测试研究了在ＨＤＰＥ／尼龙－６共混过程中ＥＡＡ对体系的增容作用、力学性能以及结晶行为的影响。研究结果表明，在反应共混过程中，ＥＡＡ中丙烯酸链段与尼龙－６末端胺基发生了化学反应，就地形成的ＥＡＡ－尼龙－６接枝共聚物对ＨＤＰＥ／尼龙－６体系有增容作用，因而明显减小了相区尺寸，提高了拉伸强度。由于在共混过程中有接枝共聚物形成，明显降低了尼龙－６的结晶。     

Insertion of triangulated surfaces into a meccano tetrahedral discretization by means of mesh refinement and optimization procedures

In this paper, we present a new method for inserting several triangulated surfaces into an existing tetrahedral mesh generated by the meccano method. The result is a conformal mesh where each inserted surface is approximated by a set of faces of the final tetrahedral mesh. First, the tetrahedral mesh is refined around the inserted surfaces to capture their geometric features. Second, each immersed surface is approximated by a set of faces from the tetrahedral mesh. Third, following a novel approach, the nodes of the approximated surfaces are mapped to the corresponding immersed surface. Fourth, we untangle and smooth the mesh by optimizing a regularized shape distortion measure for tetrahedral elements in which we move all the nodes of the mesh, restricting the movement of the edge and surface nodes along the corresponding entity they belong to. The refining process allows approximating the immersed surface for any initial meccano tetrahedral mesh. Moreover, the proposed projection method avoids computational expensive geometric projections. Finally, the applied simultaneous untangling and smoothing process delivers a high‐quality mesh and ensures that the immersed surfaces are interpolated. Several examples are presented to assess the properties of the proposed method.     

Certification Institutions Expected to Update and Transfer Information on Present Standards

Standards are the basis for production enterprises to organize production, ex-factory inspection, trade (delivery) and technical exchanges, product certification, quality arbitration and supervision.……     

Flow calorimeter for enthalpy increment measurements on condensed gases

A flow calorimeter for enthalpy increment measurements on condensed gases is presented. A better knowledge of the properties of the liquefied natural gas is needed, and therefore a liquid loop has been designed for our flow calorimeter. The fluid loop in the calorimeter is designed in order to avoid the two-phase region, since two phases would give compositional disturbances in the measurements. The avoidance of the two-phase region is made possible by increasing the pressure of the test fluid after the measurement section, then heating the fluid at super-critical pressure past the critical point. Finally, the fluid is throttled to the low-pressure gas state at the inlet condition of the compressor that circulates the fluid. To perform the pressure increase, a new cryogenic pump has been designed. To evaluate the new equipment, measurements were taken on liquid ethane over the temperature range 146–256 K at pressure between 0.9 and 5.1 MPa.     

From Industry 4.0 to Research 4.0. Development of High Performance Fibers in the Light of Digitization

We associate a variety of innovations with the term ＂Industry 4.0＂. The pioneer of many 4.0 modifications forms the basisfor the trend towards the integrated di...     

Refrigerators Enter a New Era of Health Preservation Frestech initiates the establishment of China's first standard for household sterilization refrigerators

On November 30, 2007, the China Association for Standardization (CAS) held a press conference at Beijing Diaoyutai State Guest House. Leaders from the China Household Electric Appliance Research Institute, the China Household Electric Appliance Association, and the China Consumers' Association attended and made speeches.……     

Roman iron and steel: A review

ABSTRACT

The production of ferrous metal increased during the Roman Late Republican period, Principate and Empire. The direct bloomery process was used to extract the metal from its ores using slag-tapping and slag-pit furnaces. The fuel was charcoal and an air blast was introduced by bellows-operated tuyères. Iron formed as a bloom, often as a spongy mass of metal, which contained impurities from the smelting process, including unreacted ore, fuel, slag and fragments from the furnace walls, while the metal was often inhomogeneous with varied carbon contents. Blooms were either smithed directly into bars or ingots or they were broken up, which also allowed the removal of gross impurities and a selection of pieces with similar properties to be made. These could then be forge-welded together and formed into characteristically shaped ingots. Making steel in the furnace seems to have been achieved: it depended on the ore and the furnace and conditions within it. Surface carburization was also carried out. Iron and steel were used extensively in construction and for tools and weapons. Fire welding was often used to add pieces of steel to make the edges of tools and weapons, which could be heat-treated by quenching to harden them.     

Optimum-Simulation von Ernteprozessen

Zusammenfassung Bei der Gestaltung von Ernteprozessen — beispielsweise des Prozesses Mähdrusch, Körnertransport und -abnahme — als transportverbundene Fließarbeitsverfahren mit mindestens zwei verschiedenen Arbeitsmitteln gibt es einen großen Optimierungsspielraum. Solche Prozesse sind mehrstufige Bedienungsprozesse mit gemischter Anordnung der Bedienungseinrichtungen. Außerdem besitzen sie stark ausgeprägte räumliche Aspekte. Es wird vor allem gezeigt, welche Merkmale solcher Prozesse in Simulationsmodellen abgebildet sein müssen, welche Zielgrößen in Abhängigkeit von welchen Einflußgrößen unter Berücksichtigung welcher Prozeßbedingungen ermittelt werden sollten und wie der Bewertungsprozeß zur Ermittlung der gewünschten Informationen gestaltet werden muß.     

A study of centrifugal cast high boron high speed steel

In the present study a high‐boron high speed steel (HSS) roll material was designed. Many expensive alloy elements have been substituted by cheap boron alloy, and high‐boron high speed steel roll has been manufactured by centrifugal casting method. The microstructures, mechanical properties and wear resistance of centrifugal casting high‐boron high speed steel roll have been investigated by optical microscopy (OM), scanning electron microscopy (SEM), and X‐ray diffraction (XRD) analysis, hardness test, impact test and wear test. The results indicated that the solidification microstructures of high‐boron high speed steel roll consisted of M₂(B,C), (W,Mo)₂(B,C), M₃(B,C), M₂₃(B,C)₆ type borocarbides and martensite, a small amount of retained austenite. Borocarbides were continuously distributed over the grain boundary. After quenching from 1050 °C, local broken network appeared in partial borocarbides, and fine secondary borocarbide precipitated from the matrix. After tempering from 525 °C, the amount of precipitated borocarbide increased significantly. After heat treatment, the hardness of high‐boron high speed steel roll excelled 60 HRC, and its impact toughness excelled 8.0 J/cm². The single groove steel rolling amount of high‐boron high speed steel rolls increases by 500% than that of bainite cast iron roll, when the rolls are used in K₁ mill housing of bar mill.     

Thixotropy of Systems with Shear Thinning and Plastic Flow Behavior

The definition of the thixotropy is a decrease in viscosity with time in shear and a subsequent recovery of viscosity after the shear deformation is removed.We ...