Stretchable‐Rubber‐Based Triboelectric Nanogenerator and Its Application as Self‐Powered Body Motion Sensors

A stretchable‐rubber‐based (SR‐based) triboelectric nanogenerator (TENG) is developed that can not only harvest energy but also serve as self‐powered multifunctional sensors. It consists of a layer of elastic rubber and a layer of aluminum film that acts as the electrode. By stretching and releasing the rubber, the changes of triboelectric charge distribution/density on the rubber surface relative to the aluminum surface induce alterations to the electrical potential of the aluminum electrode, leading to an alternating charge flow between the aluminum electrode and the ground. The unique working principle of the SR‐based TENG is verified by the coupling of numerical calculations and experimental measurements. A comprehensive study is carried out to investigate the factors that may influence the output performance of the SR‐based TENG. By integrating the devices into a sensor system, it is capable of detecting movements in different directions. Moreover, the SR‐based TENG can be attached to a human body to detect diaphragm breathing and joint motion. This work largely expands the applications of TENG not only as effective power sources but also as active sensors; and opens up a new prospect in future electronics.     

A Self‐Powered Angle Measurement Sensor Based on Triboelectric Nanogenerator

A self‐powered, sliding electrification based quasi‐static triboelectric sensor (QS‐TES) for detecting angle from rotating motion is reported. This innovative, cost‐effective, simply‐designed QS‐TES has a two‐dimensional planar structure, which consists of a rotator coated with four channel coded Cu foil material and a stator with a fluorinated ethylenepropylene film. On the basis of coupling effect between triboelectrification and electrostatic induction, the sensor generates electric output signals in response to mechanical rotating motion of an object mounted with the sensor. The sensor can read and remember the absolute angular position, angular velocity, and acceleration regardless being continuously monitored or segmented monitored. Under the rotation speed of 100 r min^?1, the output voltage of the sensor reaches as high as 60 V. Given a relatively low threshold voltage of ±0.5 V for data processing, the robustness of the device is guaranteed. The resolution of the sensor is 22.5° and can be further improved by increasing the number of channels. Triggered by the output voltage signal, the rotating characteristics of the steering wheel can be real‐time monitored and mapped by being mounted to QS‐TES. This work not only demonstrates a new principle in the field of angular measurement but also greatly expands the applicability of triboelectric nanogenerator as self‐powered sensors.     

A Motion Vector Sensor via Direct‐Current Triboelectric Nanogenerator

Motion vector sensors play an important role in artificial intelligence and internet of things. Here, a triboelectric vector sensor (TVS) based on a direct‐current triboelectric nanogenerator is reported, for self‐powered measuring various motion parameters, including displacement, velocity, acceleration, angular, and angular velocity. Based on the working mechanism of the contact‐electrification effect and electrostatic breakdown, a continuous DC signal can be collected to directly monitor moving objects free from environmental electromagnetic signal interference existing in conventional self‐powered TVSs with an alternative‐current signal output, which not only enhances the sensitivity of sensors, but also provides a simple solution to miniaturize the sensors. Its sensitivity is demonstrated to be equivalent to state‐of‐the‐art photoelectric technology by a comparative experiment in an intelligent mouse. Notably, an intelligent pen based on the miniaturized TVS is designed to realize motion trajectory tracing, mapping, and writing on the curved surface. This work provides a new paradigm shift to design motion vector sensors and self‐powered sensors in artificial intelligent and internet of things.     

A Battery‐Less Arbitrary Motion Sensing System Using Magnetic Repulsion‐Based Self‐Powered Motion Sensors and Hybrid Nanogenerator

Self‐powered arbitrary motion sensors are in high demand in the field of autonomous controlled systems. In this work, a magnetic repulsion‐assisted self‐powered motion sensor is integrated with a hybrid nanogenerator (MRSMS–HNG) as a battery‐less arbitrary motion sensing system. The proposed device can efficiently detect the motion parameters of a moving object along any arbitrary direction and simultaneously convert low frequency (<5 Hz) vibrations into useful electricity. The MRSMS–HNG consists of a central magnet for the electromagnetic (EMG)–triboelectric (TENG) nanogenerator and four side magnets for motion sensors. Because all the magnets are aligned in the same magnetization direction, the repulsive force owing to the movement of the central magnet actuates the side magnets to achieve self‐powered arbitrary motion sensing. These self‐powered motion sensors exhibit a high sensitivity of 981.33 mV g^?1 under linear motion excitation and have a tilting angle sensitivity of 9.83 mV deg^?1. The proposed device can deliver peak powers of 27 mW and 56 µW from the EMG and TENG, respectively. By integrating the self‐powered motion sensors and hybrid nanogenerator on a single device, real‐time wireless transmission of motion sensor data to a smartphone is successfully demonstrated, thus realizing a battery‐less arbitrary motion‐sensing system for future autonomous control applications.     

Self‐Powered Vehicle Emission Testing System Based on Coupling of Triboelectric and Chemoresistive Effects

Traditional triboelectric nanogenerator (TENG)‐based self‐powered chemical‐sensing systems are demonstrated by measuring the triboelectric effect of the sensing materials altered by the external stimulus. However, the limitations of triboelectric sensing materials and instable outputs caused by ambient environment significantly restrict their practical applications. In this work, a stable and reliable self‐powered chemical‐sensing system is proposed by coupling triboelectric effect and chemoresistive effect. The whole system is constructed as the demo of a self‐powered vehicle emission test system by connecting a vertical contact–separate mode TENG as energy harvester with a series‐connection resistance‐type gas sensor as exhaust detector and the parallel‐connection commercial light‐emitting diodes (LEDs) as alarm. The output voltage of TENG varies with the variable working states of the gas sensor and then directly reflects on the on/off status of the LEDs. The working mechanism can be ascribed to the specific output characteristics of the TENG tuned by the load resistance of the gas sensor, which is responded to the gas environment. This self‐powered sensing system is not affected by working frequency and requires no external power supply, which is favorable to improve the stability and reliability for practical application.     

Enhancing Output Power of Cylindrical Triboelectric Nanogenerators by Segmentation Design and Multilayer Integration

The triboelectric nanogenerator (TENG) is a newly invented technology that is effective for harvesting ambient mechanical energy for portable electronics, self‐powered sensor networks, etc. Here, by introducing segmentation and multilayer integration into the cylindrical TENG, the generator's output is enhanced significantly. With a four‐layer and thirty‐segment configuration, the TENG produces a short‐circuit current of 86 μA (13.5 μA m^?2) and power of 4.3 mW (676 mW m^?2) at a rotating speed of 600 rpm, which are respectively over 70 and 15 times higher than those of the one‐layer and one‐segment structure. This makes the TENG a sufficient power supply for conventional electronics, such as light bulbs and temperature sensors. Furthermore, it is demonstrated that the segmentation design is a perfect self‐power management technique to automatically lower the TENG's output voltage and increase its output current without scarifying the output power. The fractal geometry is an effective way to maximize the TENG's contact surface area and thereby the output performance.     

Triboelectric Nanogenerator for Harvesting Vibration Energy in Full Space and as Self‐Powered Acceleration Sensor

A spherical three‐dimensional triboelectric nanogenerator (3D‐TENG) with a single electrode is designed, consisting of an outer transparent shell and an inner polyfluoroalkoxy (PFA) ball. Based on the coupling of triboelectric effect and electrostatic effect, the rationally developed 3D‐TENG can effectively scavenge ambient vibration energy in full space by working at a hybridization of both the contact‐separation mode and the sliding mode, resulting in the electron transfer between the Al electrode and the ground. By systematically investigating the output performance of the device vibrating under different frequencies and along different directions, the TENG can deliver a maximal output voltage of 57 V, a maximal output current of 2.3 μA, and a corresponding output power of 128 μW on a load of 100 MΩ, which can be used to directly drive tens of green light‐emitting diodes. Moreover, the TENG is utilized to design the self‐powered acceleration sensor with detection sensitivity of 15.56 V g^‐1. This work opens up many potential applications of single‐electrode based TENGs for ambient vibration energy harvesting techniques in full space and the self‐powered vibration sensor systems.     

Auxetic Foam‐Based Contact‐Mode Triboelectric Nanogenerator with Highly Sensitive Self‐Powered Strain Sensing Capabilities to Monitor Human Body Movement

The first contact‐mode triboelectric self‐powered strain sensor using an auxetic polyurethane foam, conductive fabric, and polytetrafluroethylene (PTFE) is fabricated. Utilizing the auxetic properties of the polyurethane foam, the auxetic polyurethane foam would expand into the PTFE when the foam is stretched, causing contact electrification. Due to a larger contact area between the PTFE and the foam as the foam is stretched, this device can serve effectively as a strain sensor. The sensitivity of this method is explored, and this sensor has the highest sensitivity in all triboelectric nanogenerator devices that are used previously as a strain sensor. Different applications of this strain sensor are shown, and this sensor can be used as a human body monitoring system, self‐powered scale to measure weight, and a seat belt to measure body movements inside a car seat.     

Enhanced Performance of a ZnO Nanowire‐Based Self‐Powered Glucose Sensor by Piezotronic Effect

A self‐powered, piezotronic effect‐enhanced glucose sensor based on metal‐semiconductor‐metal (M–S–M) structured single ZnO nanowire device is demonstrated. A triboelectrical nanogenerator (TENG) is integrated to build a self‐powered glucose monitoring system (GMS) to realize the continuously monitoring of glucose concentrations. The performance of the glucose sensor is generally enhanced by the piezotronic effect when applying a –0.79% compressive strain on the device, and magnitude of the output signal is increased by more than 200%; the sensing resolution and sensitivity of sensors are improved by more than 200% and 300%, respectively. A theoretical model using energy band diagram is proposed to explain the observed results. This work demonstrates a promising approach to raise the sensitivity, improve the sensing resolution, and generally enhance the performance of glucose sensors, also providing a possible way to build up a self‐powered GMS.     

Rolling Friction Enhanced Free‐Standing Triboelectric Nanogenerators and their Applications in Self‐Powered Electrochemical Recovery Systems

Heavy metals contained in wastewater are one of the most serious pollutions in natural resources. A self‐powered electrochemical recovery system for collecting Cu ions in wastewater by incorporating a rolling friction enhanced freestanding triboelectric nanogenerator (RF‐TENG) is developed here. The RF‐TENG utilizes integrated cylindrical surfaces using the conjunction of rolling electrification and freestanding electrostatic induction, which shows outstanding output performance and ultrarobust stability. By using the kinetic energy of flowing water, a collection efficiency of up to 80% for Cu²⁺ ions in wastewater has been achieved. Self‐powered electrochemical systems are one of the most promising applications of TENGs for independent and sustainable driving of electrochemical reactions without the need for any additional power supply. This research is a substantial advancement towards the practical applications of triboelectric nanogenerators and self‐powered electrochemical systems.     

Tribotronics for Active Mechanosensation and Self‐Powered Microsystems

Tribotronics has attracted great attention as a new research field that encompasses the control and tuning of semiconductor transport by triboelectricity. Here, tribotronics is reviewed in terms of active mechanosensation and human–machine interfacing. As a fundamental unit, contact electrification field‐effect transistors are analyzed, in which the triboelectric potential can be used to control electrical transport in semiconductors. Several tribotronic functional devices have been developed for active control and information sensing, which has demonstrated triboelectricity‐controlled electronics and established active mechanosensation for the external environment. In addition, the universal triboelectric power management strategy and the triboelectric nanogenerator‐based constant sources are also reviewed, in which triboelectricity can be managed by electronics in the reverse action. With the implantation of triboelectric power management modules, the harvested triboelectricity by various kinds of human kinetic and environmental mechanical energy can be effectively managed as a power supply for self‐powered microsystems. In terms of the research prospects for interactions between triboelectricity and semiconductors, tribotronics is expected to demonstrate significant impact and potential applications in micro‐electro‐mechanical systems/nano‐electro‐mechanical systems (MEMS/NEMS), flexible electronics, robotics, wireless sensor network, and Internet of Things.     

Nickel Metal-Organic Framework/PVDF Composite Nanofibers-based Self-Powered Wireless Sensor for Pulse Monitoring of Underwater Divers via Triboelectrically Generated Maxwell's Displacement Current

With the increasing need for underwater exploration to monitor environment, collect data or recreation, underwater diving and its associated technologies have drawn significant attention. So, a single-electrode triboelectric nanogenerator (STENG) as self-powered wireless sensor based on Maxwell displacement current concept for underwater usages to monitor arterial pulse and body movements of diver is demonstrated. The STENG is fabricated with an optimized 7.5 wt.% of hydrothermally synthesized Ni-MOF and PVDF based composite nanofibers (Ni-MOF/PVDF CNF) on copper foil as electronegative tribo-material and electrospun nylon 66 nanofibers as electropositive tribo-material. The PDMS encapsulation of STENG exhibits water-proof properties with V_oc, I_sc, and charge output at 45 V, 0.77 µA, and 0.169 µC/cycle, respectively under single-finger tapping. As pulse sensor, STENG monitors arterial pulse and wirelessly transmits information underwater (without external power), wherein STENG generated current creates polarized field in water to get transmitted within a certain distance. Additionally, STENG is demonstrated as a strain sensor to monitor joint movements like ‘elbow, shoulder, knee, etc. Detailed reliability studies reveal that the device is robust against multiple cycles of bending, retains its performance in saline/muddy water, and in the presence of obstacles in the transmission path, which confirms its potential in real life conditions for pulse monitoring of underwater divers.     

Triboelectric Nanogenerators Based on Melamine and Self‐Powered High‐Sensitive Sensors for Melamine Detection

Melamine (Mel) is added illegally to foods and feeds due to its high nitrogen content and high intake, and it causes serious health problems, so it is urgent to build a simple and quick method for detecting Mel in our daily life. In this work, a self‐powered Mel detection method is developed that is based on the newly invented triboelectric nanogenerator (TENG) by using the strong electronegativity property of Mel. In addition, Mel can enhance the electrical output signals of the TENGs by pairing with other triboelectric materials. Thus a high‐sensitive Mel sensor is designed based on polytetrafluoethylene (PTFE) TENG; the output current of TENG increases with the addition of Mel, resulting in largely improved detection limit of Mel with 0.5 ppb and a linear increase range from 1 to 500 ppb. This study not only develops a new type of material for TENG, but also demonstrates an innovative and convenient method for the detection of Mel and other biomaterials.     

Triboelectric Nanogenerator as an Active UV Photodetector

Self‐powered nanosensors and nanosystems have attracted significant attention in the past decades and have gradually become the most desirable and promising prototype for environmental protection/detection because no battery is needed to power the device. Therefore, in this paper a design is proposed for a self‐powered photodetector based on triboelectric nanogenerator (TENG) configuration. 3D dendritic TiO₂ nanostructures are synthesized as the built‐in UV photodetector as well as the contact material of the TENG. The cost‐effective, robust, and easily fabricated TENG‐based photodetector presents superior photoresponse characteristics, which include an excellent responsivity over 280 A W^?1, rapid rise time (18 ms) and decay time (31 ms), and a wide detection range of light intensity from 20 μW cm^?2 to 7 mW cm^?2. In the last part of the paper, a stand‐alone and self‐powered environmental sensing device is developed by applying poly(methyl methacrylate) (PMMA) substrates and springs to assemble the TENG‐based photodetector. These results indicate that the new prototype sensing device based on the TENG configuration shows great potential as a self‐powered photodetector.     

Self ‐Powered Insole Plantar Pressure Mapping System

Sensitive monitoring and real‐time foot pressure mapping have important applications for medical treatment/diagnostics, sports training, and even security. In this work, a facile plantar pressure mapping system with a large pressure detection range using piezoelectric nanogenerators serving as the sensor array to acquire pressure signals, and a self‐designed data acquisition (DAQ) circuit board to process and wirelessly send the signals to a mobile terminal, such as a smart phone, are developed. Working with an application program developed in Android, the whole system can accurately monitor and visually display the real‐time pressure distribution during walking. More importantly, by combining a hybridized triboelectric–electromagnetic nanogenerator, a self‐powered, continuous, and real‐time pressure distribution monitoring system is developed, which provides a feasible solution for sport/exercise biomechanics information acquisition, injury prevention, and ulceration prediction in the feet.     

Self‐Powered Tactile Sensor Array Systems Based on the Triboelectric Effect

With the arrival of intelligent terminals, tactile sensors which are capable of sensing various external physical stimuli are considered among the most vital devices for the next generation of smart electronics. To create a self‐powered tactile sensor system that can function sustainably and continuously without an external power source is of crucial significance. An overview of the development in self‐powered tactile sensor array system based on the triboelectric effect is systematically presented. The combination of multi‐functionalization and high performance of tactile sensors aimed at achieving highly comprehensive performance is presented. For the tactile sensor unit, a development is summarized based on the two primary modes which are vertical contact–separation and single‐electrode. For the pressure mapping array, the resolution is significantly enhanced by the novel cross‐type configuration based on the single‐electrode mode. Integrated with other mechanisms, the performance will be further elevated by broadening of the detect range and realizing of visualization of pressure imaging. Then, two main applications of human–machine interaction (HMI) and trajectory monitoring are comprehensively summarized. Finally, the future perspectives of self‐powered tactile sensor system based on triboelectric effect are discussed.     

Entirely,Intrinsically, and Autonomously Self‐Healable,Highly Transparent,and Superstretchable Triboelectric Nanogenerator for Personal Power Sources and Self‐Powered Electronic Skins

Power and electronic components that are self‐healable, deformable, transparent, and self‐powered are highly desirable for next‐generation energy/electronic/robotic applications. Here, an energy‐harvesting triboelectric nanogenerator (TENG) that combines the above features is demonstrated, which can serve not only as a power source but also as self‐powered electronic skin. This is the first time that both of the triboelectric‐charged layer and electrode of the TENG are intrinsically and autonomously self‐healable at ambient conditions. Additionally, comparing with previous partially healable TENGs, its fast healing time (30 min, 100% efficiency at 900% strain), high transparency (88.6%), and inherent superstretchability (>900%) are much more favorable. It consists of a metal‐coordinated polymer as the triboelectrically charged layer and hydrogen‐bonded ionic gel as the electrode. Even after 500 cutting‐and‐healing cycles or under extreme 900%‐strain, the TENG retains its functionality. The generated electricity can be used directly or stored to power commercial electronics. The TENG is further used as self‐powered tactile‐sensing skin in diverse human–machine interfaces including smart glass, an epidermal controller, and phone panel. This TENG with merits including fast ambient‐condition self‐healing, high transparency, intrinsic stretchability, and energy‐extraction and actively‐sensing abilities, can meet wide application needs ranging from deformable/portable/transparent electronics, smart interfaces, to artificial skins.     

A Highly Stretchable Fiber‐Based Triboelectric Nanogenerator for Self‐Powered Wearable Electronics

The development of flexible and stretchable electronics has attracted intensive attention for their promising applications in next‐generation wearable functional devices. However, these stretchable devices that are made in a conventional planar format have largely hindered their development, especially in highly stretchable conditions. Herein, a novel type of highly stretchable, fiber‐based triboelectric nanogenerator (fiber‐like TENG) for power generation is developed. Owing to the advanced structural designs, including the fiber‐convolving fiber and the stretchable electrodes on elastic silicone rubber fiber, the fiber‐like TENG can be operated at stretching mode with high strains up to 70% and is demonstrated for a broad range of applications such as powering a commercial capacitor, LCD screen, digital watch/calculator, and self‐powered acceleration sensor. This work verifies the promising potential of a novel fiber‐based structure for both power generation and self‐powered sensing.     

Self‐Powered Iontophoretic Transdermal Drug Delivery System Driven and Regulated by Biomechanical Motions

Transdermal drug delivery (TDD) systems with feedback control have attracted extensive research and clinical interest owing to their unique advantages of convenience, self‐administration, and safety. Here, a self‐powered wearable iontophoretic TDD system that can be driven and regulated by the energy harvested from biomechanical motions is proposed for closed‐loop motion detection and therapy. A wearable triboelectric nanogenerator (TENG) is used as the motion sensor and energy harvester that can convert biomechanical motions into electricity for iontophoresis without stored‐energy power sources, while a hydrogel‐based soft patch with side‐by‐side electrodes is designed to enable noninvasive iontophoretic TDD. Proof‐of‐concept experiments on pig skin with dyes as model drugs successfully demonstrate the feasibility of the proposed system. This work not only extends the application of TENG in the biomedical field, but may also provide a cost‐effective solution for noninvasive, electrically assisted TDD with closed‐loop sensing and treatment.     

Ultrathin Nanogenerators as Self‐Powered/Active Skin Sensors for Tracking Eye Ball Motion

Ultrathin piezoelectric nanogenerator (NG) with a total thickness of ≈16 μm is fabricated as an active or self‐powered sensor for monitoring local deformation on a human skin. The NG was based on an anodic aluminum oxide (AAO) as an insulating layer grown on a thin Al foil by anodization, on which a thin film made of aligned ZnO nanowire compacted arrays is grown by solution chemistry. The performance of the NG is characterized with the assistance of the finite element method (FEM) simulation. The extremely thin NG is attached on the surface of an eyelid, and its output voltage/current characterizes the motion of the eye ball underneath. Since there is no external power needed for the operation of the NG, this self‐powered or active sensor can be effective in monitoring sleeping behavior, brain activities, and spirit status of a person as well as any biological associated skin deformation.