Revealing nanoscale phase separation in small-molecule photovoltaic blends by plasmonic contrast in the TEM

Good prospects of organic solar cells (OSC) are dampened by relatively poor transport properties in the organic donor–acceptor (D–A) absorber system. A widely recognized key to overcome this drawback is the ability to control its D–A morphology at the bulk heterojunction (BHJ) on the nanometer scale. An essential prerequisite for this is to characterize the BHJ of the carbonaceous materials combination. However, due to their similarity, particularly if not crystalline, only poor-contrast images are achieved by conventional transmission electron microscopy (TEM).We apply energy filtered transmission electron microscopy spectrum imaging (EFTEM SI) to study local phase separation with chemical sensitivity in a co-evaporated zinc phthalocyanine (ZnPc) (D) and C₆₀ (A) blend layer. As image contrast we exploit the significant difference between the plasmon energies of the pure materials (23 and 26 eV for ZnPc and C₆₀, respectively) as recorded by electron energy loss spectroscopy.In order to fully understand its structure and morphology, on the one hand conventional TEM analysis allows to identify suitably oriented crystalline phases on the basis of lattice fringes (here only C₆₀). On the other hand the EFTEM SI plasmon map discloses the complete lateral distribution of the two molecular phases independent of crystallinity.     

Enhanced Performance in Polymer Solar Cells by Surface Energy Control

Enhanced performance of an inverted‐type polymer solar cell is reported by controlling the surface energy of a zinc oxide (ZnO) buffer layer, on which a photoactive layer composed of a polymer:fullerene‐derivative bulk heterojunction is formed. With the approach based on a mixed self‐assembled monolayer, the surface energy of the ZnO buffer layer can be controlled between 40 mN m^?1 and 70 mN m^?1 with negligible changes in its work function. For the given range of surface energy the power conversion efficiency increases from 3.27% to 3.70% through enhanced photocurrents. The optimized morphology obtained by surface energy control results in the enhanced photocurrent and transmission electron microscopy analysis verifies the correlation between the surface energy and the phase morphology of the bulk heterojunction. These results demonstrate that surface energy control is an effective method for further improving the performance of polymer solar cells, with potentially important implications for other organic devices containing an interface between a blended organic active layer and a buffer or an electrode layer.     

n‐Type Quinoidal Oligothiophene‐Based Semiconductors for Thin‐Film Transistors and Thermoelectrics

Organic electronic devices have gained immense popularity in the last 30 years owing to their increasing performance. Organic thin‐film transistors (OTFTs) are one of the basic organic electronic devices with potential industrial applications. Another class of devices called organic thermoelectric (OTE) materials can directly transform waste heat into usable electrical power without causing any pollution. p‐Type transistors outperform n‐type transistors because the latter requires a lower orbital energy level for efficient electron injection and stable electron transport under ambient conditions. Aromatic building blocks can be utilized in constructing n‐type semiconductors. Quinoidal compounds are another promising platform for optoelectronic applications because of their unique properties. Since their discovery in 1970s, quinoidal oligothiophene‐based n‐type semiconductors have drawn considerable attention as candidates for high‐performance n‐type semiconductors in OTFTs and OTEs. Herein, the development history of quinoidal oligothiophene‐based semiconductors is summarized, with a focus on the molecular design and the influence of structural modification on molecular packing and thus the device performance of the corresponding quinoidal oligothiophene‐based semiconductors. Insights on the potential of quinoidal oligothiophenes for high‐performance n‐type OTFTs and OTEs are also provided.     

Using First‐Principles Calculations for the Advancement of Materials for Rechargeable Batteries

Rechargeable batteries have been regarded as leading candidates for energy storage systems to satisfy soaring energy demands and ensure efficient energy use, and intensive efforts have thus been focused on enhancing their energy densities and power capabilities. First‐principles calculations based on quantum mechanics have played an important role in obtaining a fundamental understanding of battery materials, thus providing insights for material design. In this feature article, the theoretical approaches used to determine key battery properties, such as the voltage, phase stability, and ion‐diffusion kinetics, are reviewed. Moreover, the recent contribution of first‐principles calculations to the interpretation of complicated experimental characterization measurements on battery materials, such as those obtained using X‐ray absorption spectroscopy, electron energy‐loss spectroscopy, nuclear magnetic resonance spectroscopy, and transmission electron microscopy, are introduced. Finally, perspectives are provided on the research direction of first‐principles calculations for the development of advanced batteries, including the further development of theories that can accurately describe the dissolved species, amorphous phases, and surface reactions that are integral to the operation of future battery systems beyond Li‐ion batteries.     

Successive Spray Deposition of P3HT/PCBM Organic Photoactive Layers: Material Composition and Device Characteristics

Controlling the active layer composition in organic electronic devices represents one of the major challenges in their fabrication. In particular, the composition of mixed donor/acceptor active layers for photosensitive device applications is known to strongly influence device performance. Here, an alternative approach for the preparation of organic heterojunction photoactive layers by successive spray deposition of the donor material, poly(3‐hexylthiophene) (P3HT), and acceptor material, [6,6]‐phenyl C61‐butyric acid methyl ester (PCBM), is reported. Optical absorption spectra, X‐ray reflectivity, and cross‐sectional transmission electron microscopy investigations are used to indicate the penetration of PCBM into a previously deposited P3HT layer and the spontaneous formation of a bulk heterojunction (BHJ) within the active layer, which provides the large interfacial area needed for efficient exciton dissociation. It is shown that organic photodiodes composed of photoactive layers prepared using this fabrication method exhibit a performance comparable to conventional BHJ devices in which the active layer is rigorously blended in advance. Moreover, separate handling of the individual materials and their deposition from distinct solutions enables an enhanced control of the active layer composition and hence increases the ability of tuning device characteristics.     

Solution‐Processable Ultrathin Black Phosphorus as an Effective Electron Transport Layer in Organic Photovoltaics

2D van der Waals crystals, possessing excellent electronic and physical properties, have been intriguing building blocks for organic optoelectronic devices. Most of the 2D materials are served as hole transport layers in organic devices. Here,it is reported that solution exfoliated few layers black phosphorus (BP) can be served as an effective electron transport layer (ETL) in organic photovoltaics (OPVs) for the first time. The power conversion efficiencies (PCEs) of the BP‐incorporated OPVs can be improved to 8.18% in average with the relative enhancement of 11%. The incorporation of BP flakes with the optimum thickness of ≈10 nm can form cascaded band structure in OPVs, which can facilitate electron transport and enhance the PCEs of the devices. This study opens an avenue in using solution exfoliated BP as a highly efficient ETL for organic optoelectronics.     

Interface Modification to Improve Hole‐Injection Properties in Organic Electronic Devices

The performance of organic electronic devices is often limited by injection. In this paper, improvement of hole injection in organic electronic devices by conditioning of the interface between the hole‐conducting layer (buffer layer) and the active organic semiconductor layer is demonstrated. The conditioning is performed by spin‐coating poly(9,9‐dioctyl‐fluorene‐co‐N‐ (4‐butylphenyl)‐diphenylamine) (TFB) on top of the poly(3,4‐ethylene dioxythiophene): poly(styrene sulfonate) (PEDOT:PSS) buffer layer, followed by an organic solvent wash, which results in a TFB residue on the surface of the PEDOT:PSS. Changes in the hole‐injection energy barriers, bulk charge‐transport properties, and current–voltage characteristics observed in a representative PFO‐based (PFO: poly(9,9‐dioctylfluorene)) diode suggest that conditioning of PEDOT:PSS surface with TFB creates a stepped electronic profile that dramatically improves the hole‐injection properties of organic electronic devices.     

Controlling Electron and Hole Charge Injection in Ambipolar Organic Field‐Effect Transistors by Self‐Assembled Monolayers

Controlling contact resistance in organic field‐effect transistors (OFETs) is one of the major hurdles to achieve transistor scaling and dimensional reduction. In particular in the context of ambipolar and/or light‐emitting OFETs it is a difficult challenge to obtain efficient injection of both electrons and holes from one injecting electrode such as gold since organic semiconductors have intrinsically large band gaps resulting in significant injection barrier heights for at least one type of carrier. Here, systematic control of electron and hole contact resistance in poly(9,9‐di‐n‐octylfluorene‐alt‐benzothiadiazole) ambipolar OFETs using thiol‐based self‐assembled monolayers (SAMs) is demonstrated. In contrast to common believe, it is found that for a certain SAM the injection of both electrons and holes can be improved. This simultaneous enhancement of electron and hole injection cannot be explained by SAM‐induced work‐function modifications because the surface dipole induced by the SAM on the metal surface lowers the injection barrier only for one type of carrier, but increases it for the other. These investigations reveal that other key factors also affect contact resistance, including i) interfacial tunneling through the SAM, ii) SAM‐induced modifications of interface morphology, and iii) the interface electronic structure. Of particular importance for top‐gate OFET geometry is iv) the active polymer layer thickness that dominates the electrode/polymer contact resistance. Therefore, a consistent explanation of how SAM electrode modification is able to improve both electron and hole injection in ambipolar OFETs requires considering all mentioned factors.     

Structural Origins for Tunable Open‐Circuit Voltage in Ternary‐Blend Organic Solar Cells

Ternary‐blend bulk‐heterojunction solar cells have provided a unique opportunity for tuning the open‐circuit voltage (V_oc) as the “effective” highest occupied molecular orbital (HOMO) or lowest unoccupied molecular orbital (LUMO) energy levels shift with active‐layer composition. Grazing‐incidence X‐ray diffraction (GIXD) measurements performed on such ternary‐blend thin films reveal evidence that the two polymer donors interact intimately; their ionization potentials are thus reflections of the blend compositions. In ternary‐blend thin films in which the two polymer donors do not interact physically, the polymer donors each retain their molecular electronic character; solar cells constructed with these ternary blends thus exhibit V_ocs that are pinned to the energy level difference between the highest of the two lying HOMO and the LUMO of the electron acceptor. These observations are consistent with the organic alloy model proposed earlier. Quantification of the square of the square‐root differences of the surface energies of the components provides a proxy for the Flory–Huggins interaction parameter for polymer donor pairs in these ternary‐blend systems. Of the three ternary‐blend systems examined herein, this quantity has to be below 0.094 in order for ternary‐blend solar cells to exhibit tunable V_oc.     

Reticulated Organic Photovoltaics

This paper shows how the self‐assembled interlocking of two nanostructured materials can lead to increased photovoltaic performance. A detailed picture of the reticulated 6‐DBTTC/C₆₀ organic photovoltaic (OPV) heterojunction, which produces devices approaching the theoretical maximum for these materials, is presented from near edge X‐ray absorption spectroscopy (NEXAFS), X‐ray photoelectron spectroscopy (XPS), Grazing Incidence X‐ray diffraction (GIXD) and transmission electron microscopy (TEM). The complementary suite of techniques shows how self‐assembly can be exploited to engineer the interface and morphology between the cables of donor (6‐DBTTC) material and a polycrystalline acceptor (C₆₀) to create an interpenetrating network of pure phases expected to be optimal for OPV device design. Moreover, we find that there is also a structural and electronic interaction between the two materials at the molecular interface. The data show how molecular self‐assembly can facilitate 3‐D nanostructured photovoltaic cells that are made with the simplicity and control of bilayer device fabrication. The significant improvement in photovoltaic performance of the reticulated heterojunction over the flat analog highlights the potential of these strategies to improve the efficiency of organic solar cells.     

Manifestation of Strongly Correlated Electrons in a 2D Kagome Metal–Organic Framework

2D and layered electronic materials characterized by a kagome lattice, whose valence band structure includes two Dirac bands and one flat band, can host a wide range of tunable topological and strongly correlated electronic phases. While strong electron correlations have been observed in inorganic kagome crystals, they remain elusive in organic systems, which benefit from versatile synthesis protocols via molecular self-assembly and metal-ligand coordination. Here, direct experimental evidence of local magnetic moments resulting from strong electron–electron Coulomb interactions in a 2D metal–organic framework (MOF) is reported. The latter consists of di-cyano-anthracene (DCA) molecules arranged in a kagome structure via coordination with copper (Cu) atoms on a silver surface [Ag(111)]. Temperature-dependent scanning tunneling spectroscopy reveals magnetic moments spatially confined to DCA and Cu sites of the MOF, and Kondo screened by the Ag(111) conduction electrons. By density functional theory and mean-field Hubbard modeling, it is shown that these magnetic moments are the direct consequence of strong Coulomb interactions between electrons within the kagome MOF. The findings pave the way for nanoelectronics and spintronics technologies based on controllable correlated electron phases in 2D organic materials.     

Pyridine‐Containing Electron‐Transport Materials for Highly Efficient Blue Phosphorescent OLEDs with Ultralow Operating Voltage and Reduced Efficiency Roll‐Off

A series of pyridine‐containing electron‐transport materials are developed as an electron‐transport layer for the FIrpic‐based blue phosphorescent organic light‐emitting diodes. Their energy levels can be tuned by the introduction of pyridine rings in the framework and on the periphery of the molecules. Significantly reduced operating voltage is achieved without compromising external quantum efficiency by solely tuning the nitrogen atom orientations of those pyidine rings. Unprecedented low operating voltages of 2.61 and 3.03 V are realized at 1 and 100 cd m^?2, giving ever highest power efficiency values of 65.8 and 59.7 lm W^?1, respectively. In addition, the operating voltages at 100 cd m^?2 can be further reduced to 2.70 V by using a host material with a small singlet‐triplet exchange energy, and the threshold voltage for electroluminescence can even be 0.2–0.3 V lower than the theoretical minimum value of the photon energy divided by electron charge. Aside from the reduced operating voltage, a further reduced roll‐off in efficiency is also achieved by the combination of an appropriate host material.     

Systematic Study of Widely Applicable N‐Doping Strategy for High‐Performance Solution‐Processed Field‐Effect Transistors

A specific design for solution‐processed doping of active semiconducting materials would be a powerful strategy in order to improve device performance in flexible and/or printed electronics. Tetrabutylammonium fluoride and tetrabutylammonium hydroxide contain Lewis base anions, F^? and OH^?, respectively, which are considered as organic dopants for efficient and cost‐effective n‐doping processes both in n‐type organic and nanocarbon‐based semiconductors, such as poly[[N,N′‐bis(2‐octyldodecyl)‐naphthalene‐1,4,5,8‐bis(dicarboximide)‐2,6‐diyl]‐alt‐5,5′‐(2,2′‐bithiophene)] (P(NDI2OD‐T2)) and selectively dispersed semiconducting single‐walled carbon nanotubes by π‐conjugated polymers. The dramatic enhancement of electron transport properties in field‐effect transistors is confirmed by the effective electron transfer from the dopants to the semiconductors as well as controllable onset and threshold voltages, convertible charge‐transport polarity, and simultaneously showing excellent device stabilities under ambient air and bias stress conditions. This simple solution‐processed chemical doping approach could facilitate the understanding of both intrinsic and extrinsic charge transport characteristics in organic semiconductors and nanocarbon‐based materials, and is thus widely applicable for developing high‐performance organic and printed electronics and optoelectronics devices.     

Locking the morphology with a green,fast and efficient physical cross-linking approach for organic electronic applications

Molecular packing and stability play crucial roles in determining the performance of organic electronic devices. To optimize the morphology of active layer, thus to improve the performance, especially the stability of devices, cross-linking technique is a viable approach that has been extensively applied to stabilize the morphology. In this work, we demonstrate a green, fast and efficient physical approach using hyperthermal hydrogen induced cross-linking (HHIC) to lock the morphology of organic electronic materials. By controlling the kinetic energy of the hyperthermal hydrogen (H₂) molecules, we can efficiently cleave the C–H bonds and induce cross-linking in a conjugated polymer. The cross-linking can be achieved in 1 min at room temperature, and the cross-linked films have excellent thermal stability and high resistance to organic solvents. Organic field effect transistors fabricated with HHIC treated poly (3-hexylthiophene) (P3HT) has comparable charge carrier mobility and superb stability than the untreated devices. Compared to the conventional chemically driven cross-linking approach, HHIC does not require additional modification in molecular structure, and the fast and non-destructive advantages have high potential for wide applications of highly stable organic electronic devices.     

Visualization of Current and Mapping of Elements in Quantum Dot Solar Cells

The delicate influence of properties such as high surface state density and organic–inorganic boundaries on the individual quantum dot electronic structure complicates pursuits toward forming quantitative models of quantum dot thin films ab initio. This report describes the application of electron beam‐induced current (EBIC) microscopy to depleted‐heterojunction colloidal quantum dot photovoltaics (DH‐CQD PVs), a technique which affords one a “map” of current production within the active layer of a PV device. The effects of QD sample size polydispersity as well as layer thickness in CQD active layers as they pertain to current production within these PVs are imaged and explained. The results from these experiments compare well with previous estimations, and confirm the ability of EBIC to function as a valuable empirical tool for the design and betterment of DH‐CQD PVs. Lastly, extensive and unexpected PbS QD penetration into the mesoporous TiO₂ layer is observed through imaging of device cross sections by energy‐dispersive X‐ray spectroscopy combined with scanning transmission electron microscopy. The possible effects of this finding are discussed and corroborated with the EBIC studies on similar devices.     

Contact Resistance in Organic Field‐Effect Transistors: Conquering the Barrier

Organic semiconductors have sparked interest as flexible, solution processable, and chemically tunable electronic materials. Improvements in charge carrier mobility put organic semiconductors in a competitive position for incorporation in a variety of (opto‐)electronic applications. One example is the organic field‐effect transistor (OFET), which is the fundamental building block of many applications based on organic semiconductors. While the semiconductor performance improvements opened up the possibilities for applying organic materials as active components in fast switching electrical devices, the ability to make good electrical contact hinders further development of deployable electronics. Additionally, inefficient contacts represent serious bottlenecks in identifying new electronic materials by inhibiting access to their intrinsic properties or providing misleading information. Recent work focused on the relationships of contact resistance with device architecture, applied voltage, metal and dielectric interfaces, has led to a steady reduction in contact resistance in OFETs. While impressive progress was made, contact resistance is still above the limits necessary to drive devices at the speed required for many active electronic components. Here, the origins of contact resistance and recent improvement in organic transistors are presented, with emphasis on the electric field and geometric considerations of charge injection in OFETs.     

Interface Functionalities in Multilayer Stack Organic Light Emitting Transistors (OLETs)

Herein is described a multidisciplinary approach to understand the performance limitations of small molecule organic light emitting transistors (OLETs) based on a layered architecture, an innovative architecture potentially competitive with the state of the art and more flexible for spectral emission control. The processes of charge injection and field‐effect transport at metal/organic and organic/organic interfaces are analysed using microscopic and spectroscopic techniques in coordination. Atomic force microscopy and ultrasonic force microscopy are employed to characterize the interface morphology and the initial growth stages of organic films where charge transport actually occurs. X‐ray diffraction and near edge X‐ray dichroic absorption with linearly polarised light allow to determine the unit cell packing and the molecular orientation at the active organic interfaces, as well as the amount of non‐ordered domains. Moreover, chemical reactivity at the interfaces is measured by X‐ray photoelectron spectroscopy. It is found that a strong reaction occurs at the metal‐organic interfaces, with molecular fragmentation. Additionally, the transport properties strongly depend on the nature of the materials forming the organic stack. Specifically, amorphous conjugated films as bottom layers can promote an increased molecular disorder in the upper active layer, with a concomitant deterioration of the conduction properties.     

A Method for Fabricating an Ultrathin Multilayer Film Composed of Poly(p‐phenylenevinylene) and Reduced Graphene Oxide on a Plastic Substrate for Flexible Optoelectronic Applications

The photoconductive properties of a uniform ultrathin multilayer film composed of alternating poly(p‐phenylene vinylene) (PPV) and reduced graphene oxide (RGO) layers, fabricated on a poly(ethylene terephthalate) (PET) sheet are reported. The assembly of the two electron‐rich layer components on the temperature‐sensitive substrate is realized using a layer‐by‐layer‐deposition technique under mild conditions and HI/H₂O vapor treatment at 100 °C. This protocol is established to simultaneously convert the layer components to their conjugated counterparts, PPV and RGO in the multilayer films, whose total thicknesses shrinks to 50% of their original values due to lattice contraction. Furthermore, the surface roughness decreases significantly, in contrast to the results obtained from general chemical treatments. The PET sheets coated with (PPV/RGO)₁₅ films exhibit a photocurrent of 115 μA at an illumination intensity of 1.1 mW and a photoresponsivity of 111.1 mA W^?1 at an illumination intensity of 0.5 mW; these are among the best values yet achieved in carbon‐based materials. The establishment of a method for fabricating (PPV/RGO) films on a temperature‐sensitive transparent flexible sheet is crucial for the development of organic‐based portable electronic devices.     

Conventional Electron Microscopy and Electron Holography of Organic Solar Cells

Organic solar cells are a promising route towards large‐area and low‐price photovoltaic systems. The devices are composed of at least two layers: the hole‐transport layer and the electron‐transport layer. The light absorption can occur in one or both layers. At the interface of the layers the excitons are separated into charge carriers, and every layer deals with one type of carrier. Higher efficiencies of the separation process can be obtained by using a mixed layer containing both materials to obtain a very high interface area. Although the structure of the mixed layers used plays a crucial role for the device performance, until now the morphologies have not been elucidated. In order to correlate physical and optical findings with structure and morphology for the materials in question, electron microscopy experiments were performed on the single components as well as on the layer systems. The conventional electron microscope is a poor phase microscope. As consequence, weak‐phase objects like organic molecules have to be stained or imaged under strong defocus to produce an observable contrast. Artifacts caused by chemical staining and the appearance of Fresnel diffraction using the defocus technique represent the main problems of conventional microscopy. These artifacts can be avoided using electron holography. Holograms of ultrathin sections of thin layers composed of organic dye molecules were recorded. Subsequently, the phase images were reconstructed. In this manner, we succeeded in obtaining high‐contrast electron micrographs without applying staining or defocus. In addition, holograms of crystalline C₆₀ and zinc phthalocyanine were successfully recorded. Holography has been shown to be a useful tool to image beam‐sensitive and weak‐phase objects without artifacts.