Self‐Assembly of Semiconducting Polymer Amphiphiles for In Vivo Photoacoustic Imaging

Despite the advantages of semiconducting polymer nanoparticles (SPNs) over other inorganic nanoparticles for photoacoustic (PA) imaging, their synthetic method is generally limited to nanoprecipitation, which is likely to cause the issue of nanoparticle dissociation. The synthesis of near‐infrared (NIR) absorbing semiconducting polymer amphiphiles (SPAs) that can spontaneously self‐assemble into homogeneous nanoparticles for in vivo PA imaging is reported. As compared with their counterpart nanoparticles (SPN1) prepared through nanoprecipitation, SPAs generally have higher fluorescence quantum yields but similar size and PA brightness, making them superior over SPN1. Optical and simulation studies reveal that the poly(ethylene glycol) (PEG) grafting density plays a critical role in determining the packing of SP segments inside the core of nanoparticles, consequently affecting the optical properties. The small size and structurally stable nanostructure, in conjunction with a dense PEG shell, allow SPAs to passively target tumors of living mice after systemic administration, permitting both PA and fluorescence imaging of the tumors at signals that are ≈1.5‐fold higher than that of liver. This study thus not only provides the first generation of amphiphilic optically active polymers for PA imaging, but also highlights the molecular guidelines for the development of organic NIR imaging nanomaterials.     

Hierarchical Self‐Assembly of a Dandelion‐Like Supramolecular Polymer into Nanotubes for use as Highly Efficient Aqueous Light‐Harvesting Systems

A dandelion‐like supramolecular polymer (DSP) with a “sphere‐star‐parachute” topological structure consisting of a spherical hyperbranched core and many parachute‐like arms is constructed by the non‐covalent host–guest coupling between a cyclodextrin‐endcapped hyperbranched multi‐arm copolymer (host) and many functionalized adamantanes with each having three alkyl chain arms (guests). The obtained DSPs can further self‐assemble into nanotubes in water in a hierarchical way from vesicles to nanotubes through sequential vesicle aggregation and fusion steps. The nanotubes have a bilayer structure consisting of multiple “hydrophobic‐hyperbranched‐hydrophilic” layers. Such a structure is very useful for constructing a chlorosome‐like artificial aqueous light‐harvesting system, as demonstrated here, via the incorporation of hydrophobic 4‐(2‐hydroxyethylamino)‐7‐nitro‐2,1,3‐benzoxadiazole as donors inside the hyperbranched cores of the nanotubes and the hydrophilic Rhodamine B as the acceptors immobilized on the nanotube surfaces. This as‐prepared nanotube light harvesting system demonstrates unexpectedly high energy transfer efficiency (above 90%) in water. This extends supramolecular polymers with more complex topological structure, special self‐assembly behavior, and new functionality.     

Temperature‐Switchable Assembly of Supramolecular Virus–Polymer Complexes

Here a method is presented for the temperature‐switchable assembly of viral particles into large hierarchical complexes. Dual‐functional diblock copolymers consisting of poly(diethyleneglycol methyl ether methacry­late) (poly(DEGMA)) and poly((2‐dimethylamino)ethyl methacrylate) (poly(DMAEMA)) blocks self‐assemble electrostatically with cowpea chlorotic mottle virus (CCMV) particles into micrometer‐sized objects as a function of temperature. The poly(DMAEMA) block carries a positive charge, which can interact electrostatically with the negatively charged outer surface of the CCMV capsid. When the solution temperature is increased above 40 °C, to cross the cloud point temperature (T_cp) of the DEGMA block, the polymer chains collapse on the surface of the virus particle, which makes them partially hydrophobic, and consequently causes the formation of large hierarchical assemblies. Disassembly of the virus–polymer complexes can be induced by reducing the solution temperature below the T_cp, which allows the poly(DEGMA) blocks to rehydrate and free virus particles to be released. The assembly process is fully reversible and can sustain several heating–cooling cycles. Importantly, this method relies on reversible supramolecular interactions and therefore avoids the irreversible covalent modification of the particle surface. This study illustrates the potential of temperature‐responsive polymers for controlled binding and releasing of virus particles.     

High‐Nanofiller‐Content Graphene Oxide–Polymer Nanocomposites via Vacuum‐Assisted Self‐Assembly

Highly ordered, homogeneous polymer nanocomposites of layered graphene oxide are prepared using a vacuum‐assisted self‐assembly (VASA) technique. In VASA, all components (nanofiller and polymer) are pre‐mixed prior to assembly under a flow, making it compatible with either hydrophilic poly(vinyl alcohol) (PVA) or hydrophobic poly(methyl methacrylate) (PMMA) for the preparation of composites with over 50 wt% filler. This process is complimentary to layer‐by‐layer assembly, where the assembling components are required to interact strongly (e.g., via Coulombic attraction). The nanosheets within the VASA‐assembled composites exhibit a high degree of order with tunable intersheet spacing, depending on the polymer content. Graphene oxide–PVA nanocomposites, prepared from water, exhibit greatly improved modulus values in comparison to films of either pure PVA or pure graphene oxide. Modulus values for graphene oxide–PMMA nanocomposites, prepared from dimethylformamide, are intermediate to those of the pure components. The differences in structure, modulus, and strength can be attributed to the gallery composition, specifically the hydrogen bonding ability of the intercalating species     

Self‐Assembly of π‐Conjugated Amphiphiles: Free Standing,Ordered Sheets with Enhanced Mobility

Oligo(p‐phenylenevinylenes) (OPVs) with amphiphilic character are synthesized and their self‐assembly characteristics studied. Careful studies point at two morphologically different states of assemblies, with one being two dimensional sheets and the other as rolled tubes. This is also the first time that self‐assembled sheets are achieved for OPVs. Morphological and photo‐physical studies reveal a unique aggregate to aggregate transition between rolled tubes and two dimensional sheets, which is outlined as a more thermodynamic aggregate. The thermodynamic aggregate (2D sheet) is better ordered and consists of chromophores that are better excitonically coupled. The mobilities of these aggregates are also studied for a field effect transistor device and as expected sheets supersede rolled tubes by a couple of orders. More interestingly, the mobility values obtained for the well ordered chromophores in sheets is three orders higher than any other self‐assembled OPV previously reported. It is hypothesized that the better π interactions enforced by the amphiphilic design and the resultant supramolecular organization is a prime factor for such a remarkable rise in mobilities.     

Electrostatically Directed Self‐Assembly of Ultrathin Supramolecular Polymer Microcapsules

Supramolecular self‐assembly offers routes to challenging architectures on the molecular and macroscopic scale. Coupled with microfluidics it has been used to make microcapsules—where a 2D sheet is shaped in 3D, encapsulating the volume within. In this paper, a versatile methodology to direct the accumulation of capsule‐forming components to the droplet interface using electrostatic interactions is described. In this approach, charged copolymers are selectively partitioned to the microdroplet interface by a complementary charged surfactant for subsequent supramolecular cross‐linking via cucurbit[8]uril. This dynamic assembly process is employed to selectively form both hollow, ultrathin microcapsules and solid microparticles from a single solution. The ability to dictate the distribution of a mixture of charged copolymers within the microdroplet, as demonstrated by the single‐step fabrication of distinct core–shell microcapsules, gives access to a new generation of innovative self‐assembled constructs.     

Highly Oriented Nanofibrils of Regioregular Poly(3‐hexylthiophene) Formed via Block Copolymer Self‐Assembly in Liquid Crystals

A novel method making use of block copolymer self‐assembly in nematic liquid crystals (LCs) is described for preparing macroscopically oriented nanofibrils of π‐conjugated semiconducting polymers. Upon cooling, a diblock copolymer composed of regioregular poly(3‐hexylthiophene) (P3HT) and a liquid crystalline polymer (LCP) in a block‐selective LC solvent can self‐assemble into oriented nanofibrils exhibiting highly anisotropic absorption and polarized photoluminescence emission. An unusual feature of the nanofibrils is that P3HT chains are oriented along the fibrils' long axis. This general method makes it possible to use LCs as an anisotropic medium to grow oriented nanofibrils of many semiconducting polymers insoluble in LCs.     

Surfactant‐Assisted Emulsion Self‐Assembly of Nanoparticles into Hollow Vesicle‐Like Structures and 2D Plates

The emulsion‐based self‐assembly of nanoparticles into low‐dimensional superparticles of hollow vesicle‐like assemblies is reported. Evaporation of the oil phase at relatively low temperatures from nanoparticle‐containing oil‐in‐water emulsion droplets leads to the formation of stable and uniform sub‐micrometer vesicle‐like assembly structures in water. This result is in contrast with those from many previously reported emulsion‐based self‐assembly methods, which produce solid spherical assemblies. It is found that extra surfactants in both the oil and water phases play a key role in stabilizing nanoscale emulsion droplets and capturing hollow assembly structures. Systematic investigation into what controls the morphology in emulsion self‐assembly is carried out, and the approach is extended to fabricate more complex rattle‐like structures and 2D plates. These results demonstrate that the emulsion‐based assembly is not limited to typical thermodynamic spherical assembly structures and can be used to fabricate various types of interesting low‐dimensional assembly structures.     

Preparation and Memory Performance of a Nanoaggregated Dispersed Red 1‐Functionalized Poly (N‐vinylcarbazole) Film via Solution‐Phase Self‐Assembly

A nanoaggregated dispersed red 1‐grafted poly(N‐vinylcarbazole) (abbreviated PVDR) is self‐assembled via π–π stacking interactions of the carbazole groups in the polymer system after adding a solution of PVDR in N,N‐dimethylformamide to dichloromethane. Upon self‐assembly, the nanoaggregated PVDR film displays helical columnar stacks with large grain sizes, whereas a non‐aggregated PVDR film exhibits an amorphous morphology with smaller grain size. A write‐once read‐many‐times (WORM) memory device is shown whereby a pre‐assembled solution of PVDR is spin‐coated as the active layer and is sandwiched between an aluminum electrode and an indium‐tin‐oxide (ITO) electrode. This device shows very good memory performance, with an ON/OFF current ratio of more than 10⁵ and a low misreading rate through the precise control of the ON and OFF states. The stability of the nanoaggregated PVDR device is much higher than that of the non‐nanoaggregated PVDR device. This difference in device stability under constant voltage stress can be mainly attributed to the difference in the film crystallinity and surface morphology. No degradation in current density was observed for the ON‐ and OFF‐states after more than one hundred million (10⁸) continuous read cycles indicating that both states were insensitive to the read cycles. These results render the nanoaggregated PVDR polymer as promising components for high‐performance polymer memory devices.     

Self‐Assembly of DNA‐Templated Polypyrrole Nanowires: Spontaneous Formation of Conductive Nanoropes

Polypyrrole nanowires formed by polymerization of pyrrole on a DNA template self‐assemble into rope‐like structures. These ‘nanoropes’ may be quite smooth (diameters 5–30 nm) or may show frayed ends where individual strands are visible. A combination of electric force microscopy, conductive atomic force microscopy and two‐terminal current–voltage measurements show that they are conductive. Nanoropes adhere more weakly to hydrophobic surfaces prepared by silanization of SiO₂ than to the clean oxide; this effect can be used to aid the combing of the nanoropes across microelectrode devices for electrical characterization.     

Nanostructured Crystalline Comb Polymer of Perylenebisimide by Directed Self‐Assembly: Poly(4‐vinylpyridine)‐pentadecylphenol Perylenebisimide

Well defined nanostructured polymeric supramolecular assemblies are formed when an asymmetric perylenebisimide substituted with ethylhexyl chains on one end and functionalized with 3‐pentadecylphenol at the other termini ( PDP‐UPBI ) is complexed with poly(4‐vinylpyridine) (P4VP) via a non‐covalent specific interaction such as hydrogen‐bonding. The resulting P4VP(PDP‐UPBI) _n complexes are fully solution processable. The bulk structure and morphologies of the supramolecular film studied using small angle and wide angle X‐ray scattering reveals highly crystalline nature of the complex. Thin film morphology of the 1:1 complex analyzed using transmission electron microscopy shows uniform lamellar structures in the domain range of 5–10 nm. A clear trend of improved electrical parameters in P4VP(PDP‐UPBI) system compared to pristine ( PDP‐UPBI ) is observed from space charge limited current measurements. In short, a simple and facile method to obtain spatially defined organization of n‐type semiconductor perylenebisimide molecules using hydrogen bonding interactions with P4VP as the structural motif is showcased herein.     

Entanglement of Conjugated Polymer Chains Influences Molecular Self‐Assembly and Carrier Transport

The influence of polymer entanglement on the self‐assembly, molecular packing structure, and microstructure of low‐M_w (lightly entangled) and high‐M_w (highly entangled) poly (3‐hexylthiophene) (P3HT), and the carrier transport in thin‐film transistors, are investigated. The polymer chains are gradually disentangled in a marginal solvent via ultrasonication of the polymer solution, and demonstrate improved diffusivity of precursor species (coils, aggregates, and microcrystallites), enhanced nucleation and crystallization of P3HT in solution, and self‐assembly of well‐ordered and highly textured fibrils at the solid–liquid interface. In low‐M_w P3HT, reducing chain entanglement enhances interchain and intrachain ordering, but reduces the interconnectivity of ordered domains (tie molecules) due to the presence of short chains, thus deteriorating carrier transport even in the face of improving crystallinity. Reducing chain entanglement in high‐M_w P3HT solutions increases carrier mobility up to ≈20‐fold, by enhancing interchain and intrachain ordering while maintaining a sufficiently large number of tie molecules between ordered domains. These results indicate that charge carrier mobility is strongly governed by the balancing of intrachain and interchain ordering, on the one hand, and interconnectivity of ordered domains, on the other hand. In high‐M_w P3HT, intrachain and interchain ordering appear to be the key bottlenecks to charge transport, whereas in low‐M_w P3HT, the limited interconnectivity of the ordered domains acts as the primary bottleneck to charge transport.     

Electrically Conductive Thin Films Prepared from Layer‐by‐Layer Assembly of Graphite Platelets

Layer‐by‐layer (LBL) assembly of carbon nanoparticles for low electrical contact resistance thin film applications is demonstrated. The nanoparticles consist of irregularly shaped graphite platelets, with acrylamide/ββ‐methacryl‐oxyethyl‐trimethyl‐ammonium copolymer as the cationic binder. Nanoparticle zeta (ζζ) potential and thereby electrostatic interactions are varied by altering the pH of graphite suspension as well as that of the binder suspension. Film thickness as a function of zeta potential, immersion time, and the number of layers deposited is obtained using Monte Carlo simulation of the energy dispersive spectroscopy measurements. Multilayer film surface morphology is visualized via field‐emission scanning electron microscopy and atomic‐force microscopy. Thin film electrical properties are characterized using electrical contact resistance measurements. Graphite nanoparticles are found to self‐assemble onto gold substrates through two distinct yet overlapping mechanisms. The first mechanism is characterized by logarithmic carbon uptake with respect to the number of deposition cycles and slow clustering of nanoparticles on the gold surface. The second mechanism results from more rapid LBL nanoparticle assembly and is characterized by linear weight uptake with respect to the number of deposition cycles and a constant bilayer thickness of 15 to 21 nm. Thin‐film electrical contact resistance is found to be proportional to the thickness after equilibration of the bilayer structure. Measured values range from 1.6 mΩ cm^?2 at 173 nm to 3.5 mΩ cm^?2 at 276 nm. Coating volume resistivity is reduced when electrostatic interactions are enhanced during LBL assembly.     

Interfacial Crystallization‐Driven Assembly of Conjugated Polymers/Quantum Dots into Coaxial Hybrid Nanowires: Elucidation of Conjugated Polymer Arrangements by Electron Tomography

A simple and practical “solution‐biphase method” allows the preparation of efficient charge‐transporting 1D nanocrystals with coaxial p–n junctions. It involves gradual diffusion of a top layer of poor solvent (acetonitrile) into a bottom layer of poly(3‐hexyl thiophene)‐b‐poly(2‐vinyl pyridine) (P3HT‐b‐P2VP) conjugated polymers (CPs) and CdSe quantum dots (QDs) dissolved in chloroform. Initial interfacial crystallization‐driven assembly of CPs results in the formation of seeds consisting of dimeric QDs transversely bridged by CPs. Coaxial CPs/QDs hybrid NWs are generated by 1D growth of QDs‐dimeric seeds, enabling tracing of the CPs‐crystallization process via the QDs. Thus, well‐arranged QDs along the longitudinal axis of the NWs infer highly crystalline CPs with edge‐on orientation, as confirmed by electron tomography, UV–vis spectroscopy, and grazing‐incidence wide‐angle X‐ray scattering. This high cristallinity as well as the increased length of the resulting hybrid NWs in solution and the corresponding crystallite size in as‐cast film represent a significant improvement compared to the conventional “one‐pot addition method”. Moreover, although randomly QDs‐attached hybrids of P3HT homopolymer are produced by the solution‐biphase method, branched aggregates with micrometer‐long NW arms are generated from the crystal seeds containing multiple growth facets without precipitate, despite acetonitrile being a nonsolvent.     

Halogen Bonding versus Hydrogen Bonding in Driving Self‐Assembly and Performance of Light‐Responsive Supramolecular Polymers

Halogen bonding is arguably the least exploited among the many non‐covalent interactions used in dictating molecular self‐assembly. However, its directionality renders it unique compared to ubiquitous hydrogen bonding. Here, the role of this directionality in controlling the performance of light‐responsive supramolecular polymers is highlighted. In particular, it is shown that light‐induced surface patterning, a unique phenomenon occurring in azobenzene‐containing polymers, is more efficient in halogen‐bonded polymer–azobenzene complexes than in the analogous hydrogen‐bonded complexes. A systematic study is performed on a series of azo dyes containing different halogen or hydrogen bonding donor moieties, complexed to poly(4‐vinylpyridine) backbone. Through single‐atom substitution of the bond‐donor, control of both the strength and the nature of the noncovalent interaction between the azobenzene units and the polymer backbone is achieved. Importantly, such substitution does not significantly alter the electronic properties of the azobenzene units, hence providing us with unique tools in studying the structure–performance relationships in the light‐induced surface deformation process. The results represent the first demonstration of light‐responsive halogen‐bonded polymer systems and also highlight the remarkable potential of halogen bonding in fundamental studies of photoresponsive azobenzene‐containing polymers.     

Drug Delivery: Wavelength‐Selective Light‐Induced Release from Plasmon Resonant Liposomes (Adv. Funct. Mater. 6/2011)

Biodegradable, spectrally tunable plasmon resonant nanocapsules are created via the deposition of gold onto the surface of 100 nm diameter thermosensitive liposomes. These nanocapsules exhibit selective release of encapsulated contents upon illumination with light of a wavelength matching their distinct resonance bands. In this study, 760 and 1210 nm laser illumination elicits complete release from gold‐coated liposomes with a corresponding resonance, while causing minimal release from liposomes with an unmatching resonance. Spectrally selective release is accomplished through the use of multiple, low‐intensity laser pulses delivered over a period of minutes, ensuring that illumination affects the gold‐coated liposomes without heating the surrounding media. The use of pulsed illumination to achieve spectral selectivity is validated experimentally and through modeling of the heat equation. The result of this illumination scheme for selective release using multiple wavelengths of light is a biologically safe mechanism for realizing drug delivery, microfluidic, and sensor applications.     

Ultralight,Soft Polymer Sponges by Self‐Assembly of Short Electrospun Fibers in Colloidal Dispersions

Ultralight polymer sponges are prepared by freeze‐drying of dispersions of short electrospun fibers. In contrast to many other highly porous materials, these sponges show extremely low densities (<3 mg cm^?3) in combination with low specific surface areas. The resulting hierarchical pore structure of the sponges gives basis for soft and reversibly compressible materials and to hydrophobic behavior in combination with excellent uptake for hydrophobic liquids. Owing to their large porosity, cell culturing is successful after hydrophilic modification of the sponges.