All-active monolithic InP-based HBT VCO with tunable HEMT inductor

A novel HEMT-HBT VCO is presented; it is the first all-active analogue VCO demonstrated using InP HEMT-HBT integrated MMIC technology. The MMIC monolithically integrates an InP common-collector HBT oscillator with a tunable InP HEMT active inductor using selective MBE. The novel HEMT-HBT VCO can provide performance advantages over analogue VCOs such as the multi-vibrator, and has direct implications for high speed clock recovery circuits needed in InP based optoelectronic IC applications     

Coplanar millimeter-wave ICs for W-band applications using 0.15μm pseudomorphic MODFETs

A small signal S-parameter and noise model for the cascode MODFET has been validated up to 120 GHz, allowing predictable monolithic microwave integrated circuit (MMIC) design up to W-band. The potential of coplanar waveguide technology to build compact, high performance system modules is demonstrated by means of passive and active MMIC components. The realized passive structures comprise a Wilkinson combiner/divider and a capacitively loaded ultra miniature branch line coupler. For both building blocks, very good agreement between the measured and modeled data is achieved up to 120 GHz. Based on the accurate design database, two versions of compact integrated amplifiers utilizing cascode devices for application in the 90-120 GHz frequency range were designed and fabricated. The MMICs have 26.3 dB and 20 dB gain at 91 GHz and 110 GHz, respectively. A noise figure of 6.4 dB was measured at 110 GHz. The 90-100 GHz amplifier was integrated with an MMIC tunable oscillator resulting in a W-band source delivering more than 6 dBm output power from 94 to 98 GHz     

A fully integrated V-band PLL MMIC using 0.15-/spl mu/m GaAs pHEMT technology

A fully integrated V-band phase-locked loop (PLL) MMIC with good phase noise and low-power consumption is developed using 0.15-/spl mu/m GaAs pHEMTs. For V-band frequency division,a wideband divide-by-3 frequency divider is proposed using cascode FET-based harmonic injection locking. The fourth subharmonic mixer using anti-parallel diode pair is employed as a high-frequency phase detector. In this way, the required frequency of the reference oscillator is lowered to one twelfth of V-band output signal. An RC low-pass filter and DC amplifier are also integrated to effectively suppress the spurious and harmonic signals, and to increase the loop gain. To reduce the circuit interactions and frequency pulling effect, buffer amplifiers are used at the output of VCO and frequency divider. The fabricated V-band PLL MMIC shows the locking range of 840 MHz around 60.1GHz under a very low power dissipation of 370 mW. Good phase noise of -95.5 dBc/Hz is measured at 100 kHz offset. The chip size is as small as 2.35/spl times/1.80 mm/sup 2/. To the best of our knowledge, the PLL MMIC of this work is one of the highest frequency monolithic PLLs that integrates all the required elements on a single chip.     

A monolithically integrated HEMT-HBT low noise high linearityvariable gain amplifier

We report on a 1-6 GHz HEMT-HBT three-stage variable gain amplifier (VGA), which is realized using selective molecular beam epitaxy (MBE). The VGA integrates an HEMT low noise amplifier with an HBT analog current-steer variable gain cell and output driver stage to achieve a combination of low noise figure, wide gain control, and high linearity. The HEMT-HBT VGA MMIC obtains a maximum gain of 21 dB with a gain control range >30 dB, a minimum noise figure of 4.3 dB, and an input IP3 (IIP3) greater than -4 dBm over 25 dB of gain central range. By integrating an HEMT instead of on HBT preamplifier stage, the VGA noise figure is improved by as much as 2 dB compared to an all-HBT single-technology design. The HEMT-HBT MMIC demonstrates the functional utility and RF performance advantage of monolithically integrating both HEMT and HBT devices on a single substrate     

A SiGe MMIC variable gain cascode amplifier

A silicon-germanium variable gain cascode amplifier has been developed to combine the functionality of an amplifier and an attenuator into one monolithic microwave integrated circuit (MMIC). The cascode amplifier, which was designed for a 7-11 GHz frequency range, achieved a gain of 12.5 dB, an input return loss of 7.5 dB, and an output return loss of 12.5 dB. The cascode amplifier exhibited 16 dB of gain control.     

紧凑型Ka波段PHEMT微波单片集成VCO

设计并流片制作了基于GaAs PHEMT工艺的Ka波段微波单片集成压控振荡器(MMIC VCO).该VCO具有紧凑、宽电调谐带宽及高输出功率的特点.提出了缩小芯片面积及增大调谐带宽的方法,同时还给出了设计MMIC VCO的基本步骤.该方法设计并流片制做的MMIC VCO的测量结果为:振荡频率为36±1.2GHz,输出功率为10士1dBm,芯片面积为1.3mm×1.0mm.     

振荡型有源集成天线

研制中心频率为18 GHz的振荡型有源集成天线,包括微带天线设计、单片压控振荡器(MMIC VCO)的设计及微带天线与单片压控振荡器二者的集成。微带天线的芯片面积为4.5 mm×3.5 mm,增益为3.67 dB,中心频率为18.032 GHz,最小输入驻波系数为1.098;单片压控振荡器芯片面积1.1 mm×1.0 mm,调谐范围为15.978～18.247 GHz,输出功率大于6 dBm。振荡型有源集成天线的方向图测试结果与微带天线的特性符合,该振荡型有源集成天线能够正常工作。     

A 5-10 GHz octave-band AlGaAs/GaAs HBT-Schottky diodedown-converter MMIC

The authors describe an AlGaAs/GaAs heterojunction bipolar transistor (HBT) X-band down-converter monolithic microwave integrated circuit (MMIC) which integrates a double double-balanced Schottky mixer and five stages of HBT amplification to achieve greater than 30 dB conversion gain over an RF bandwidth from 5 to 10 GHz. In addition, an output IP3 as high as +15 dBm has been achieved. The Schottky diodes are constructed from the existing N^$collector and N⁺ subcollector layers of the HBT molecular beam epitaxy (MBE) device structure. A novel HBT amplifier topology employing active feedback which provides wide bandwidth in a compact area is used for the RF, LO, and IF amplifier stages. The complete down-converter MMIC is realized in a 3.6×3.4 mm² area, is self-biased through a 6 V supply, and consumes 530 mW. This MMIC represents the highest complexity X-band down-converter MMIC demonstrated using GaAs HBT-Schottky diode technology     

High-performance V-band cascode HEMT mixer and downconverter module

A high-performance V-band cascode HEMT mixer is presented together with a compact downconverter module integrating the mixer with other receiver MMICs. The cascode mixer was optimized for conversion gain and/or linearity by employing the low-pass interstage networks and by optimizing the bias voltages. The low-pass interstage network effectively filters out the unwanted harmonics and spurious signals, and therefore, enhances the gain and the linearity of the cascode mixer. On a two-tone test, the cascode mixer showed a high conversion gain of 6.3 dB with an LO power of 2.6 dBm at 60 GHz. When the gate bias to the upper common-gate HEMT was tuned for the intermodulation distortion "sweet spot" theoretically predicted by the authors , the mixer showed a high third-order intercept point of 11.2 dBm with a decent gain of 4.1 dB under a small DC power consumption of 8 mW. To benchmark the performance of the cascode mixer of this work, a waveguide-based compact V-band downconverter module was built by integrating the mixer with an MMIC LNA, a VCO, and a LO driving amplifier. The downconverter module showed a conversion gain higher than 20 dB from 57.5 to 61.7 GHz. This paper shows the potential of the cascode FET mixer for high-performance compact downconverter applications at millimeter-wave frequencies.     

100-GHz high-gain InP MMIC cascode amplifier

A high-gain InP monolithic millimeter-wave integrated circuit (MMIC) cascode amplifier has been developed which has 8.0 dB of average gain from 75 to 100 GHz when biased for maximum bandwidth, and more than 12 dB of gain at 80 GHz at the maximum-gain bias point, representing the highest gains reported to date, obtained from MMICs at W band (75-100 GHz). Lattice-matched InGaAs-InAlAs high-electron-mobility-transistors (HEMTs) with 0.1-μm gates were the active devices. A coplanar waveguide (CPW) was the transmission medium for this MMIC with an overall chip dimension of 600×500 μm     

A 108-GHz InP-HBT monolithic push-push VCO with low phase noise andwide tuning bandwidth

This paper reports on what is believed to be the highest frequency bipolar voltage-controlled oscillator (VCO) monolithic microwave integrated circuit (MMIC) so far reported. The W-band VCO is based on a push-push oscillator topology, which employs InP HBT technology with peak f_T's and f_max's of 75 and 200 GHz, respectively. The W-band VCO produces a maximum oscillating frequency of 108 GHz and delivers an output power of +0.92 dBm into 50 Ω. The VCO also obtains a tuning bandwidth of 2.73 GHz or 2.6% using a monolithic varactor. A phase noise of -88 dBc/Hz and -109 dBc/Hz is achieved at 1- and 10-MHz offsets, respectively, and is believed to be the lowest phase noise reported for a monolithic W-band VCO. The push-push VCO design approach demonstrated in this work enables higher VCO frequency operation, lower noise performance, and smaller size, which is attractive for millimeter-wave frequency source applications     

A Single-Ended Fully Integrated SiGe 77/79 GHz Receiver for Automotive Radar

A single-ended 77/79 GHz monolithic microwave integrated circuit (MMIC) receiver has been developed in SiGe HBT technology for frequency-modulated continuous-wave (FMCW) automotive radars. The single-ended receiver chip consists of the first reported SiGe 77/79 GHz single-ended cascode low noise amplifier (LNA), the improved single-ended RF double-balanced down-conversion 77/79 GHz micromixer, and the modified differential Colpitts 77/79 GHz voltage controlled oscillator (VCO). The LNA presents 20/21.7 dB gain and mixer has 13.4/7 dB gain at 77/79 GHz, and the VCO oscillates from 79 to 82 GHz before it is tuned by cutting the transmission line ladder, and it centres around 77 GHz with a tuning range of 3.8 GHz for the whole ambient temperature variation range from $- hbox{40},^{circ}{hbox{C}}$ to $+ hbox{125},^{circ}{hbox{C}}$ after we cut the lines by tungsten-carbide needles. Phase noise is $-$90 dBc/Hz@1 MHz offset. Differential output power delivered by the VCO is 5 dBm, which is an optimum level to drive the mixer. The receiver occupies 0.5 ${hbox{mm}}^{2}$ without pads and 1.26 ${hbox{mm}}^{2}$ with pads, and consumes 595 mW. The measurement of the whole receiver at 79 GHz shows 20–26 dB gain in the linear region with stable IF output signal. The input ${rm P}_{rm 1dB}$ of the receiver is $-$35 dBm.      

A Wide Tuning-Range CMOS VCO With a Differential Tunable Active Inductor

By utilizing a differential tunable active inductor for the LC-tank, a wide tuning-range CMOS voltage-controlled oscillator (VCO) is presented. In the proposed circuit topology, the coarse frequency tuning is achieved by the tunable active inductor, while the fine tuning is controlled by the varactor. Using a 0.18-$muhbox m$CMOS process, a prototype VCO is implemented for demonstration. The fabricated circuit provides an output frequency from 500 MHz to 3.0 GHz, resulting in a tuning range of 143% at radio frequencies. The measured phase noise is from$-$101 to$-$118 dBc/Hz at a 1-MHz offset within the entire frequency range. Due to the absence of the spiral inductors, the fully integrated VCO occupies an active area of$hbox 150times hbox 300 muhbox m^2$.     

Balanced Colpitt oscillator MMICs designed for ultra-low phase noise

Balanced voltage-controlled oscillator (VCO) monolithic microwave integrated circuits (MMICs) based on a coupled Colpitt topology with a fully integrated tank are presented utilizing SiGe heterojunction bipolar transistor (HBT) and InGaP/GaAs HBT technologies. Minimum phase noise is obtained for all designs by optimization of the tank circuit including the varactor, maximizing the tank amplitude, and designing the VCO for Class C operation. Fundamental and second harmonic VCOs are evaluated. A minimum phase noise of less than -112 dBc at an output power of 5.5 dBm is achieved at 100-kHz carrier offset and 6.4-GHz oscillation frequency for the fundamental InGaP/GaAs HBT VCO. The second harmonic VCO achieves a minimum measured phase noise of -120 dBc at 100 kHz at 13 GHz. To our best knowledge, this is the lowest reported phase noise to date for a varactor-based VCO with a fully integrated tank. The fundamental frequency SiGe HBT oscillator achieves a phase noise of -108 dBc at 100 kHz at 5 GHz. All MMICs are fabricated in commercial foundry MMIC processes.     

An Integrated 5–2.5-GHz Direct-Injection Locked Quadrature LC VCO

This letter presents an integrated direct-injection locked quadrature voltage controlled oscillator (VCO), consisted of a 5-GHz VCO integrated with injection locked LC frequency dividers for low-power quadrature generation. The circuit is implemented using a standard 0.18-mum CMOS process. The differential VCO is a full PMOS Colpitts oscillator, and the frequency divider is performed by adding an injection nMOS between the differential outputs of complementary cross-coupled np-core LC VCO. The measurement results show that at the supply voltage of 1.8-V, the master 5-GHz VCO is tunable from 4.73 to 5.74GHz, and the slave 2.5-GHz VCO is tunable from 2.36 to 2.87GHz. The measured phase noise of master VCO is -118.2dBc/Hz while the locked quadrature output phase noise is -124.4dBc/Hz at 1-MHz offset frequency, which is 6.2dB lower than the master VCO. The core power consumptions are 7.8 and 8.7mW at master and slave VCOs, respectively     

一种采用有源电感的可调增益小面积超宽带低噪声放大器

设计了一款采用可调谐有源电感（TAI）的可调增益的小面积超宽带低噪声放大器(LNA),输入级采用共基极结构,输出级采用射随器结构,分别实现了宽带输入和输出匹配;放大级采用带有反馈电阻的共射共基结构以取得宽的带宽,并采用TAI作负载,通过调节TAI的多个外部偏压使LNA的增益可调。结果表明,该LNA在2~9GHz的频带内,通过组合调节有源电感调节端口的偏压可实现S21在16.5~21.1dB的连续可调;S11小于-14.7dB;S22小于-19.3dB;NF小于4.9dB;芯片面积仅为0.049mm2。     

A 0.13-μ m CMOS Phase Shifter Using Tunable Positive/Negative Refractive Index Transmission Lines

This letter presents a tunable positive/negative refractive index transmission line (TL) phase shifter utilizing active circuits. It comprises a microstrip TL loaded with series varactors and a shunt monolithic microwave integrated circuit (MMIC) to synthesize a tunable inductor. This implementation increases the phase tuning range and maintains the input and output matching of the phase shifter across the entire phase tuning range, while eliminating the need for bulky passive inductors. The phase shifter is capable of providing both positive and negative phase shifts. The MMIC tunable inductors are fabricated in a 0.13-mum CMOS process and operate from a 1.5-V supply. The phase shifter achieves a phase of -40deg to +34deg at 2.5GHz from a single stage with less than -19dB return loss, and better than 1.1-dB insertion loss at 2.5 GHz. The phase shifter has a 1-GHz bandwidth over which the return loss remains better than 12.1dB     

A highly linear double balanced Schottky diode S-band mixer

A high-level double balanced SiC Schottky diode mixer in SiC monolithic microwave integrated circuit (MMIC) technology has been designed, processed and characterized. The mixer is a single ended in- and output circuit with coupled transformers as baluns to enable a compact design, resulting in a total area of 2.2/spl times/2.2mm/sup 2/. The mixer has a maximum IIP/sub 3/ of 38dBm and IIP/sub 2/ of 58dBm at 3.3GHz, and a typical P/sub 1 dB/ of 23dBm in the S-band. The minimum conversion loss was 12dBm at 2.4GHz. The high power operation of the mixer shows that SiC MMIC can perform well in high microwave radiation environments.     

Integrated VCO With Up/Down Converter for Si-Based 60 GHz WPAN Applications

This letter presents the design and implementation of the largest reported bandwidth of a 60 GHz up/down converter with an integrated voltage controlled oscillator (VCO) in a low-cost 0.18 mum silicon-germanium process. The up/down conversion is achieved using the 2X sub-harmonic passive mixing with anti-parallel diode pairs. A 30 GHz cross-coupled VCO is designed, optimized and integrated with the sub-harmonic mixer through a cascode amplifier to meet the local oscillator power requirements. The fully integrated chip takes only 1.5 mm² of silicon die area and consumes only 40 mW of dc power for a measured conversion loss of 12 dB at 61.5 GHz. The integrated up/down converter is measured to have greater than 9 GHz double-sided 3-dB RF bandwidth suitable for wideband high data-rate WPAN transceiver requirements. The VCO and VCO-amplifier test structures are separately fabricated and measured to have a phase noise as low as -105 dBc/Hz at 1 MHz offset with a tuning range of 2.3 GHz.     

低电调电压全集成10~20GHz VCO的设计与实现

研制了一款低电调电压、多频段压控振荡器(VCO)微波单片集成电路(MMIC),MMIC主要由6频段振荡电路、控制电路、译码电路等组成。将10~20 GHz的频率范围分为6个频段覆盖,从而将电调电压控制在5 V以内。基于GaAs异质结双极晶体管(HBT) 2μm工艺对所设计的VCO进行了流片验证,芯片面积为3.4 mm×3.2 mm。测试结果表明,在室温下,当电源电压为5 V、电调电压在0~5 V时,每个频段VCO可覆盖的频率为9.58~11.6 GHz、11.06~13.23 GHz、12.77~14.89 GHz、14.21~16.48 GHz、16~18.48 GHz和17.7~20.17 GHz;当电调电压为2.5 V、频偏为100 kHz时,每个频段VCO的相位噪声分别为-91.8、-90.5、-90.3、-90、-88.2和-87.1 dBc/Hz。因此,该6频段VCO覆盖了10~20 GHz的频率范围,且每段VCO的相位噪声指标良好,可满足低压电子系统的应用需求。