Testing PV Central Inverters＇ Compliance with International Grid Codes

In many electrical grids worldwide, the rising amount of installed PV （photovoltaic） power entails a considerable influence of PV systems on grid quality and stability. Consequently, in the wake of the revised German medium voltage directives issued in 2009, new requirements for PV inverters have been established internationally. At Fraunhofer ISE＇s Inverter Laboratory, approximately 25 large PV inverters with a nominal power of up to 880 kVA have been characterized in the past three years. In this period, the focus of many inverter manufacturers has begun to shift from traditional European markets towards an international perspective. Therefore, experiences with numerous different grid codes have been gained by our team. This work summarizes the similarities and differences between these grid codes. Additionally, several requirements that have proved to be critical will be examined. Finally, the adequacy of these grid codes to guarantee the safe and reliable operation of electrical grids is discussed.     

Flexible HVDC Transformer for Next Generation Renewable Energy Industry

The growing demand on non-fossil fuel energy has escalated the desire for mega-scale renewable energy power generation, which can no longer be satisfied solely by relying on onshore renewable energy power plants. Outcomes from a recent project funded by the Sixth European Union Framework Programme （FP6）, Project ＂Upwind＂ concluded that larger offshore wind turbines （i.e., 〉 10 MW） are feasible and cost effective. It will be beneficial for such future large scale renewable energy power generators （i.e., large offshore turbines） and plant （i.e., large offshore wind farms） to have a dedicated high efficiency, robust, flexible and low cost power collection, transmission and distribution technology. Proposed in this paper is a compact and effective hybrid HVDC （high voltage direct current） transformer that allows realisation of a highly robust and financially rewarding next generation multi-terminal HVDC system for future offshore renewable energy power plant. This concept, potentially, allows the elimination or minimisation of the need for a centralised local offshore HVDC platform or substation in each wind farm, solar farm, or tidal farm. This paper discusses the study outcome of the proposed hybrid HVDC transformer and the application of a multi-terminal HVDC system in the renewable energy industry, compared to the existing HVAC and VSC （voltage source converters） type HVDC systems.     

Research on Hybrid Renewable Energy Systems with Fault Detection Technology

Early and accurate fault detection and diagnosis for renewable energy systems can increase their safety and ensure the continuity of their service. This paper presents a comprehensive review of different fault detection and diagnosis methods for hybrid renewable energy systems consisting of a wind turbine power generator, a PV （photovoltaic） array, a PEM （polymer electrolyte membrane） fuel cell and a battery storage system. The need of batteries to store the generated power from the solar panel, wind turbine or PEM fuel cell is also emphasized. Finally, an overview of the current methods used in the diagnosing of the lead-acid battery degradation is given.     

Grid-Connected PV Solar Energy Converter with Active and Reactive Power Control

This work proposes a 12 kW three-phase grid-connected single stage PWM DC-AC converter destined to process the energy provided by a photovoltaic array composed of 57 KC200GT PV modules with high power factor for any solar radiation. The PWM inverter modeling and the control strategy, using dqO transformation, are proposed in order to also allow the system operation as an active power filter, capable to compensate harmonic components and react power generated by the non-linear loads connected to the mains grid. An input voltage clamping technique is proposed to impose the photovoltaic operation on the maximum power point. Simulation and experimental results are presented to validate the proposed methodology for grid connected photovoltaic generation system.     

High Efficiency PCS with Scan-Type MPPT Control for a Grid-Connected PV Power Generation System

For a standalone PV （photovoltaic） power generation system, the author previously proposed a new MPPT （maximum power point tracking） control method in which the I-V characteristics are scanned with a detection interval control that operates at specified intervals and monitors the maximum power point. The author has obtained satisfactory results using this new MPPT control method. This paper investigates the application of the new MPPT control method for a PCS （power conditioning system） in a grid-connected type PV power generation system. The experimental results clearly demonstrate that the developed PCS offers outstanding effectiveness in tracking the maximum power point in partially shaded environments.     

Design of a Mobile Photovoltaic Module System for Demonstration and Experimentation

In Mexico, owing to solar radiation conditions, there is great potential for PV （photovoltaic） systems. Besides, since 2007, the solar electricity interconnection agreement became official which allowed for an important growth of the photovoltaic industry. Due to the important development of the PV industry, there is a need for engineers trained to design, install, and evaluate PV systems The UAEMEX （autonomous university of the state of Mexico） offers a new bachelor degree of engineering program which dedicated to the development of sustainable energy systems. This kind of programs requires special equipment for experimentation and practice Specialists at UAEMEX also detected the need for a system to evaluate and demonstrate the application of PV modules, but they also found that most of the systems on the market are very expensive and unable to evaluate different arrangements. The goal of this paper is to present the design of a mobile system to evaluate PV modules and arrangements. This system is useful, not only for demonstration practices, but also for experimentation with different materials and types of PV panels. The design allows for two or four PV modules to be assembled in different positions and inclinations. The prototype is equipped with a data acquisition system that will be used to obtain the PV module performance curves. It will also be used to evaluate the atmospheric, interference and shadow effects on these modules. This prototype will be used to complement the practice learning of solar PV systems, but also to demonstrate the use of PV modules. The prototype is being design and constructed by a group of mechanical and electronic engineering students and this fact will be useful to meet the needs of basic science, math, and engineering teaching objectives in an integrated and hands-on way project. The essential features of system are described. A comparative analysis of the systems on the market is carried out. Also presented are the learning advantages for the students involved in the     

Simulation of Maximum Power Point Tracking for Photovoltaic Systems

A PV （photovoltaic） solar panels exhibit non-linear current--voltage characteristics, and according to the MPT （maximum power transform） theory, it can produce maximum power at only one particular OP （operating point）; namely, when the source impedance matches with the load impedance, a match which cannot be guaranteed spontaneously. Furthermore, the MPP （maximum power point） changes with temperature and light intensity variations. Therefore, different algorithms have been developed for finding MPPT （maximum power point tracking） based on offline and online methods. Evaluating the performance of these algorithms for various PV systems operating under highly dynamic environments are essentials to ensure producing reliable, efficient, cost-effective and high performance systems. One possible approach for system evaluation is to use computer simulation. This paper addresses the use of Matlab software as a simulation tool for evaluating the performance of PV solar systems and finding the MPPT.     

Clever Nuclear Fuel Technology

The purpose of given article-consideration of the basic features of modern manufacturing of nuclear fuel which would confirm fact, that the manufacturer does everything that its production would respond not only to requirements of the consumer, but also to its expected inquiries, and would correspond to intended purposes of fuel. It was defined main tendencies and features of modern technology, especially in nuclear fuel production, on base of meeting discussions, themes of journal articles on nuclear subject. They are correspond with practice of JSC NCCP （Novosibirsk Chemical Concentrates Plant） and listed in the paper. In result of it number of base features of any advanced technology, not only nuclear, described here with examples from NCCP＇s practice. Of course, there is no certain list of all attributes of modern manufacturing as there is no limit to its perfection. These categories are forming by current needs of the market, but listed ones must be.     

Dynamic Voltage Restorer with Active Disturbance Rejection Control

Power quality is one of the major concerns among consumers and electric utility companies. CUPS （custom power systems） devices are used to improve the quality of power and enhance the reliability of the power supply in the distribution networks. The DVR （dynamic voltage restorer） is an important CUPS device used to mitigate voltage sag/swell and imbalances. Various control techniques have been implemented to control the DVR, among which the PID （proportional-integral-derivative） controller is dominant because of its model independent property and its error driven technique. In this paper, a new controller based on the ADRC （active disturbance rejection control） concept is developed, and its performance is compared to that of the PID controller. The model of the DVR and its ADRC and PID controllers were developed under the MATLAB （matrix laboratory）/Simulink environment. The simulation results demonstrated the effectiveness of the ADRC over the PID controller.     

Utilization of Data Communication according to the IEC61850 Standard for Nuclear Power Plant Electrical Equipment Testing

This paper deals with an integration of directly measured electrical parameters with data acquired by data communication from protections and terminals into an advanced monitoring system. Based on the periodic test, the authors of this paper present the possibility of an extended evaluation and more accurate analysis of transient and failure events. For periodical testing, as implemented during the commissioning of power plants in the Czech Republic, a monitoring system of electrical equipment has been used, to record the courses of important electrical parameters and thus, proving the proper functioning of complex technological systems in various operation modes. Data from monitoring system were used to prove the successful results of the test or as a base data for further analysis of failures. The monitoring system has proved itself as a very useful device also when recording unexpected failure events, the cause of which was very quickly and accurately detected by the follow-up analysis. Initially, only the voltage and current data from measuring transformers, analogue transducers and contact relays were used as input data for the monitoring system. After the implementation of new digital protection technology and controlling terminals with inner data recorder, the data from digital devices could be also utilized for the monitoring system.     

Least Squares Fitting Based Fault Classification in Distribution Systems

Power systems are the largest and most complex human made systems, consisting of thousands of electrical sources, loads, transmission and distribution lines, power transformers, circuit breakers, etc. where faults always occurred. Faults can cause personnel and equipment safety problems, and can result in significant disruption to power supply and thus financial losses. In this paper we will present comprehensive mathematical suite to detect and classify fault dependent models of various types of power systems. This work will extract fault unique signatures by using polarization ellipse during the healthy condition and the polarization will be circular shape with radius equal the rated voltage of the system, but during the fault condition the polarization will be ellipse shape and the fault signature will be defined according the ellipse parameters major axis, minor axis, ellipticity and orientation angle, by using least squares criterion will define the ellipse parameters this system will identify and classify. This paper will be a milestone for extended paper based on the proposed mathematical modelling and applying it to identify, classify and localize with simulation model.     

Global Evaluation of Energy in Hybrid M-HTFC/MGT Systems in Cogenerative Arrangement

This work concerns the study of HSs （Hybrid Systems） that are made up of the integration of M-HTFC （Medium and High Temperature Fuel Cell） and MGT （Micro-Gas-Turbine）. Different typologies of hybrid systems are taken into account, which differ from each other in their plant layouts. The plants are considered in cogenerative arrangement. The aim of this study is to carry out an energetic analysis of the HS considered to obtain an analytical expression to depict the system operating in cogenerative arrangement. An energetic comparison among the systems analyzed based on some indexes is effected, which allows an evaluation of the plants performances in cogenerative arrangement. An energetic analysis is carried out, which is based on a ＂black box＂ depiction of the plant in which the components and the mutual interactions are highlighted. The fuel cell component of the plant is not analyzed as a black box, but each element that constitutes it, is elaborated as a subsystem.     

Analyzing the Share Composition of C02 Emissions in Asian Countries

This paper is concerned with the fossil fuel composition of carbon emissions in 10 selected Asian countries. It assesses how economic development may affect this composition through various channels. This paper contributes to the debate on the EKC （environmental Kuznets curve） puzzle, which hypothesizes an inverted U-shaped relationship between per capita income and pollution. The paper examines the EKC hypothesis in an empirical analysis of channels that may allow for this effect. In particular, a specific subset of this general paradigm is investigated using a fractional multinomial logit model to assess how indicators associated with economic development and energy prices affect carbon emissions from coal relative to those of natural gas and oil.     

3D Conceptual Modeling and Direct Utilization Calculations of the Albanian Low and Middle Enthalpy Geothermal Resources

The use of the Albanian geothermal springs and waters, for their curative effects （Natural SPA） dates back centuries, since the time of the Roman Empire, while their first modern use started only in 1937. Unfortunately they had not been used for its energetic values yet. The temperature of the water is above 60 ~C and the flow above 16 L/s, thus direct utilization is possible, in particular for space heating. Three-dimensional temperature field calculations and engineering calculations on a heating system with heat exchangers are presented here. The results show that the water temperature is expected to be stable and considerably higher temperature is expected through deep well drilling. The University＇s Campus of Tirana is composed of 29 buildings, which are partially heated through a coal heater. The installed capacity is 2,558 kW while the coal consumption is about 920 kg/h. The University＇s Campus of Tirana is one of the most important areas and with the highest density of population in Tirana, so it is the best area to show the heat exchanger efficiency. The economic analyses prove that the borehole heat exchangers are more convenient than the coal heating systems.     

Counter-Rotating Type Tidal Stream Power Unit Moored by Only One Cable

The authors have proposed that a counter-rotating type tidal stream power unit mounted rigidly on a pile, and outputs of the power unit and forces acting on the pile were investigated experimentally at a previous paper, A single propeller makes the pile undertake a reaction force orthogonal to the stream direction. On the contrary, proposed counter-rotating propellers do not require undertaking the reaction force of the pile, because the rotational torque is counter-balanced in the unit. This advantage means that the unit can be moored by only one cable. Continuously, this paper proposes such a power unit with tandem propellers, and experimentally investigates a behavior of the unit floating in a water channel. The vibrations of the power unit are induced from not only the individual but also the interacting rotations of the front and the rear propellers.     

Study of Properties of Lead Selenide （PbSe） Thin Films Deposited on TiO2

The study of nano properties of PbSe （lead selenide） thin films deposited on TiO2 semi conductor film prepared by sol gel method was a new work destined to perfect the nano materials used in photovoltaic energy. The growth of the first group of the fihns （Set 1： P（9）） ＆ P（14）） was based on the decomposition of lead citrate and sodium selenosulphite in the presence of sodium citrate and sodium hydroxide with ammonia and triethalamine （TEA） acting as the complexing agents and P.H stabilizers; while in the second group （Set 2： Pc15~）, the reaction bath was made up of solutions of lead nitrate Pb（NO3）2, PVA （polyvinyl alcohol）, H20 （distilled water）, NH3 （ammonia）, sodium selenosulphite （Na2SeSO3） and Triethalamine [N（CH2CH2OH）], which was used as the complexing agent. The deposited materials were identified by X-ray diffraction. In addition, nano optical and morphological investigations were also performed. The sample P9 has the lowest absorbance of about 0.3 nm in the ultra-violet region. It was found that there was a reduction in the optical absorbance as the wavelength increases. The optical band gap shows a range of 1.26-2.00 eV with sample PcIs~ having the lowest direct band gap.     

Numerical Flow Simulation in Turbine Mode of Counter-Rotating Type Pumping Unit to Cooperate with Wind Turbine

This serial research has proposed the hybrid power system combined the wind power unit with the counter-rotating type pump-turbine unit, to provide the constant output for the grid system, even at the suddenly fluctuating/turbulent wind circumstance. In this paper, the tandem impellers prepared for the counter-rotating type pumping unit were operated at the turbine mode, and the performances and the flow conditions were investigated numerically with accompanying the experimental results. Even though providing the pumping unit for the turbine mode, the maximum hydraulic efficiency is close to one of the counter-rotating type hydroelectric unit designed exclusively for the turbine mode. Besides, the runners/impellers of the unit work evidently so as to coincide the angular momentum change through the front runners/impellers with that through the rear runners/impellers, namely to take the axial flow at not only the inlet but also the outlet, without the guide vanes. From these results, it can be concluded that this type unit is effective to work at not only the pumping but also the turbine modes.     

A comparison of experimental and numerical studies performed on a low-pressure turbine blade cascade at high-speed conditions, low reynolds numbers and various turbulence intensities

This paper focuses on a comparison of experimental and numerical investigations performed on a low-pressure mid-loaded turbine blade at operating conditions comprised of a wide range of Mach numbers(from 0.5-1.1),Reynolds numbers(from 0.4e+5-3.0e+5),flow incidence(-15-15 degrees) and three levels of free-stream turbulence intensities(2,5 and 10%).The experimental part of the work was performed in a high-speed linear cascade wind tunnel.The increased levels of turbulence were achieved by a passive grid placed at the cascade inlet.A two-dimensional flow field at the center of the blade was traversed pitch-wise upstream and downstream the cascade by means of a five-hole probe and a needle pressure probe,respectively.The blade loading was measured using the surface pressure taps evenly deployed at the blade mid-span along the suction and the pressure side.The inlet turbulence was investigated using the constant temperature anemometer technique with a dual sensor probe.Experimentally evaluated values of turbulent kinetic energy and its dissipation rate were then used as inputs for the numerical simulations.An in-house code based on a system of the Favre-averaged Navier-Stokes equation closed by a two-equation k-turbulence model was adopted for the predictions.The code utilizes an algebraic model of bypass transition valid both for attached as for separated flows taking in account the effect of free-stream turbulence and pressure gradient.The resulting comparison was carried out in terms of the kinetic energy loss coefficient,distributions of downstream wakes and blade velocity.Additionally a flow visualization was performed by means of the Schlieren technique in order to provide a further understanding of the studied phenomena.A few selected cases with a particular interest in the attached and separated flow transition are compared and discussed.     

Magnetohydrodynamic Effect on Free Convection of Three Dimensional Laminar Flow in Porous Annulus

A numerical study has been carried out to investigate heat transfer by free convection under the effect of MHD （magnetohydrodynamic） for steady state three-dimensional laminar flow in horizontal and vertical cylindrical annulus filled with saturated porous media （sand silica） with fins attached to the inner cylinder. A single electric coil placed around the inner cylinder to generate a magnetic field. The governing equations which used are continuity, momentum （using Darcy＇s law） and energy equations which are transformed to dimensionless equations. The finite difference approach is used to obtain all the computational results using Fortran 90 program. The parameters affected on the system are Rayleigh number ranging within （102 ~ Ra＊ 〈 104）, and MHD （Mn） （0 〈_ Mn 〈_ 100） and radius ratio Rr （0.225, 0.338 and 0.435）. The results obtained are presented graphically in the form of streamline and isotherm contour plots and the results show that heat transfer decrease with the increase of magnetohydrodynamic. It was found that the average Nusselt number increase with Ra＊ and decrease with H~ Mn and Rr. A correlation for the average Nusselt number in terms of Ra＊ and Mn, has been developed for the inner cylinder.