化纤应用及处理

<正>20141234常压等离子体处理对PPS纤维亲水性的影响Guo X.…;Advanced Materials Research,2011,p.332(英)针对聚苯硫醚(PPS)纤维的疏水性,用常压等离子体处理PPS纤维并使其改性,可有效提高PPS纤维的亲水性。用扫描电子显微镜观察到PPS纤维的表面发生了刻蚀。随着处理功率和时间的增加,PPS纤维吸水率先增加然后下降。然而,PPS纤维的断裂强度基本上是随处理功率增加而下降的。此外,处理对PPS纤维的使用寿命没有太大的影响。     

低功率Ar等离子体对聚丙烯多孔膜的表面处理

以1 W功率的Ar等离子体对聚丙烯(PP)多孔膜作了表面处理,通过失量法和扫描电镜(SEM)法研究了等离子体的气氛压力和处理时间的表面刻蚀作用,并以水通量法评价了PP膜多孔隙内部的改性状况。结果表明,表面刻蚀作用随着等离子体气氛压力的降低及处理时间的延长而增强。中等气氛压力(18 Pa或30 Pa)的等离子体处理可使PP膜均匀通水,表明具有适中能量水平以及活性粒子密度的等离子体气氛是实现多孔膜多孔隙内部均匀改性的重要因素。为实现PP膜多孔隙内部的均匀处理同时降低表面刻蚀作用,10min、18Pa的等离子体处理条件较为合适。处理表面产生的羧基改善了表面亲水性,但表面接触角在5 d内由44.2°急剧上升到了66.0°,之后1 a内变化平稳。     

PHBV/PCL共混纤维的结构与性能

采用熔融纺丝法制备聚羟基丁酸戊酸酯(PHBV)/聚ε-己内酯(PCL)生物可降解共混纤维。采用差示扫描量热仪、广角X射线衍射仪、热台偏光显微镜和傅立叶变换红外光谱仪对PHBV/PCL共混体系的相容性和结晶性能进行了表征。结果表明:PHBV和PCL是不相容的;PHBV/PCL共混体系中的PHBV影响了PCL的结晶机制和结晶速率,PCL的结晶形态没有改变;PCL不影响PHBV的结晶机制,降低了PHBV的结晶速率,改变了PHBV的结晶形态。     

Ar等离子体对聚醚砜膜表面改性的研究

利用Ar等离子体对聚醚砜膜表面的改性研究其亲水性以及污染率的变化,分别讨论了等离子体功率,等离子处理时间,等离子的流量等因素对改性结果的影响.实验结果表明,随着等离子体功率,处理时间以及流量的增加,聚醚砜膜的亲水性不断增强然后基本不再变化.当等离子体功率为60 W,流量为20 sccm,处理时间为120 s时,获得较优的改性效果.此时聚醚砜膜的接触角由60°减小到10°,亲水性明显增强.污染率由0.652变为0.152,抗污染性能得以提高.     

PET非织造布等离子改性及抗菌性能研究

采用低温氧等离子体处理聚对苯二甲酸乙二酯(PET)非织造布接枝丙烯酸(AA)后,再接枝壳聚糖,探讨了氧等离子体参数对接枝AA后PET亲水性的影响,以及接枝壳聚糖后其PET非织造布抗菌性能的变化。结果表明:低温氧等离子体处理PET非织造布后,其纤维表面粗糙度增加,接枝AA后PET亲水性提高。低温氧等离子体处理PET非织造布接枝AA改性的最佳条件为:工作压强30 Pa,放电功率40 W,处理时间2 min。接枝壳聚糖后,PET非织造布具有抑菌性能,对大肠杆菌和金黄色葡萄球菌有明显的抑菌效果。     

低温等离子体引发丙烯酸在PET纳米纤维膜上的接枝聚合

介绍了低温等离子体引发丙烯酸（AA）表面接枝聚合对聚苯二甲酸乙二醇酯（PET）纳米纤维薄膜的改性研究。实验探索了放电时间和放电功率对薄膜润湿性的影响,在真空度60 Pa、AA气体流量3 L/min条件下,放电功率75～150 W范围内,放电时间60 s和放电功率150 W、放电时间30~60 s范围内,处理后薄膜的水接触角均为0°,结果说明了此改性PET纳米纤维膜具有超亲水性。通过扫描电镜、红外和力学性能等测试讨论了接枝处理前后薄膜的形态及性能的变化。实验结果表明气相低温等离子体接枝处理后,薄膜的断裂伸长率和断裂强度有一定的增强。低温等离子体引发AA表面接枝PET纳米纤维薄膜的方法有望成为电纺PET纤维膜表面改性的有效手段,具有积极的应用价值。     

聚己内酯/胶原/丝素复合微纳米纤维膜的制备

采用静电纺丝技术制备了聚己内酯(PCL)与胶原/丝素(COL/SF)质量比为0∶100、10∶90、20∶80、30∶70、40∶60、50∶50的复合微纳米纤维膜,通过扫描电子显微镜、力学性能测试和接触角测试等对复合纤维膜的理化性能进行表征,并将HepG_2细胞种植在复合纤维膜上检测其细胞生物相容性。结果表明:PCL/COL/SF复合微纳米纤维膜纤维形貌良好,纤维直径和亲水性随PCL含量的增加而减小;PCL/COL/SF复合纤维膜具有较好的力学性能。PCL与COL/SF质量比为30∶70时,复合纤维膜亲水性良好,强度和柔性最佳,并且HepG_2细胞在复合纤维膜表面黏附生长良好,细胞增殖情况明显,表明PCL与COL/SF质量比为30∶70的复合纤维膜有望成为一种良好的载体,可应用于体外肝细胞培养。     

静电纺PLLA/PCL有序纤维的制备及性能研究

以三氯甲烷为溶剂,按聚乳酸(PLLA)/聚己内酯(PCL)质量比70/30配制质量分数3%的溶液进行静电纺丝,接收装置为转筒,电压为10 kV,接收距离为25 cm,推进速度为1.0 mL/h,制备PLLA/PCL有序纤维膜。通过对有序纤维膜进行扫描电镜、X射线衍射、动态力学性能以及力学性能测试,讨论了转筒的表面线速度对PLLA/PCL有序纤维膜性能的影响。结果表明:随着转筒表面线速度的增加,收集的有序纤维接近于平行排列,纤维的排列有序度提高;转筒表面线速度为3.75 m/s时,收集的有序纤维膜的晶粒尺寸及结晶度达到最大值,拉伸强度也达到最大值;转筒表面线速度大于3.75 m/s,收集的有序纤维膜的结晶度和晶粒尺寸减小,拉伸强度降低;转筒表面线速度为3.75 m/s时,得到的PLLA/PCL有序纤维膜的综合性能最好。     

PCL/PVP共混膜的制备及其性能研究

利用溶液浇铸法制备了聚ε-己内酯(PCL)/聚乙烯吡咯烷酮(PVP)共混膜,分析了PCL/PVP共混膜的结晶性能、相容性、力学性能、亲水性和生物降解性能。结果表明:PVP的加入对PCL的结晶晶型无影响,但产生了稀释作用,两者可以相容且在共混过程中未发生化学反应;一定含量的PVP有助于增强共混膜的力学性能,PVP的质量分数为20%时,PCL/PVP共混膜力学性能最佳;随着PVP含量的增加,共混膜与水的接触角减小,吸水率逐步增大,PCL的亲水性得到改善;PCL/PVP共混膜在磷酸盐缓冲液中的失重率随PVP含量的增加而增大,且共混膜的失重率逐渐由PCL主导过渡到PVP主导,加入脂肪酶可加速PCL/PVP共混膜的降解。     

氧气低温等离子体对PBO纤维的表面改性

采用氧气低温等离子体对聚对苯撑苯并双噁唑(PBO)纤维进行表面改性,讨论了处理时间、处理功率及气压对PBO纤维单丝强度、与环氧树脂基体的界面剪切强度(π_(IFSS))、形态结构、表面元素组成和亲水性的影响。结果表明:在处理时间为2.5 min,处理功率为30 W,处理气压为50 Pa的最佳工艺条件下,经氧气等离子处理后的PBO纤维与环氧树脂的π_(IFSS)比原丝提高60%,达9.38 MPa,与水的接触角也从105°下降到72°。     

Insect antifeedant properties of anthranoids from the genusVismia

Vismiones and ferruginins, representatives of a new class of lypophilic anthranoids from the genusVismia were found to inhibit feeding in larvae of species ofSpodoptera, Heliothis, and inLocusta migratoria.     

Direct observation of freeze-thaw instability of latex coatings via high pressure freezing and cryogenic SEM

Despite its industrial importance, the subject of freeze-thaw (F/T) stability of latex coatings has not been studied extensively. There is also a lack of fundamental understanding about the process and the mechanisms through which a coating becomes destabilized. High pressure (2100 bar) freezing fixes the state of water-suspended particles of polymer binder and inorganic pigments without the growth of ice crystals during freezing that produce artifacts in direct imaging scanning electron microscopy (SEM) of fracture surfaces of frozen coatings. We show that by incorporating copolymerizable functional monomers, it is possible to achieve F/T stability in polymer latexes and in low-VOC paints, as judged by the microstructures revealed by the cryogenic SEM technique. Particle coalescence as well as pigment segregation in F/T unstable systems are visualized. In order to achieve F/T stability in paints, latex particles must not flocculate and should provide protection to inorganic pigment and extender particles. Because of the unique capabilities of the cryogenic SEM, we are able to separate the effects of freezing and thawing, and study the influence of the rate of freezing and thawing on F/T stability. Destabilization can be caused by either freezing or thawing. A slow freezing process is more detrimental to F/T stability than a fast freezing process; the latter actually preserves suspension stability during freezing. Presented at the 82nd Annual Meeting of the Federation of Societies for Coatings Technology, October 27–29, 2004 in Chicago, IL. Tied for first place in The John A. Gordon Best Paper Competition.     

Ethanol and (−)-α-Pinene: Attractant Kairomones for Bark and Ambrosia Beetles in the Southeastern US

In 2002–2004, we examined the flight responses of 49 species of native and exotic bark and ambrosia beetles (Coleoptera: Scolytidae and Platypodidae) to traps baited with ethanol and/or (−)-α-pinene in the southeastern US. Eight field trials were conducted in mature pine stands in Alabama, Florida, Georgia, North Carolina, and South Carolina. Funnel traps baited with ethanol lures (release rate, about 0.6 g/day at 25–28°C) were attractive to ten species of ambrosia beetles (Ambrosiodmus tachygraphus, Anisandrus sayi, Dryoxylon onoharaensum, Monarthrum mali, Xyleborinus saxesenii, Xyleborus affinis, Xyleborus ferrugineus, Xylosandrus compactus, Xylosandrus crassiusculus, and Xylosandrus germanus) and two species of bark beetles (Cryptocarenus heveae and Hypothenemus sp.). Traps baited with (−)-α-pinene lures (release rate, 2–6 g/day at 25–28°C) were attractive to five bark beetle species (Dendroctonus terebrans, Hylastes porculus, Hylastes salebrosus, Hylastes tenuis, and Ips grandicollis) and one platypodid ambrosia beetle species (Myoplatypus flavicornis). Ethanol enhanced responses of some species (Xyleborus pubescens, H. porculus, H. salebrosus, H. tenuis, and Pityophthorus cariniceps) to traps baited with (−)-α-pinene in some locations. (−)-α-Pinene interrupted the response of some ambrosia beetle species to traps baited with ethanol, but only the response of D. onoharaensum was interrupted consistently at most locations. Of 23 species of ambrosia beetles captured in our field trials, nine were exotic and accounted for 70–97% of total catches of ambrosia beetles. Our results provide support for the continued use of separate traps baited with ethanol alone and ethanol with (−)-α-pinene to detect and monitor common bark and ambrosia beetles from the southeastern region of the US.     

Methyl 2,4,6-decatrienoates Attract Stink Bugs and Tachinid Parasitoids

Halyomorpha halys (Stål) (Pentatomidae), called the brown marmorated stink bug (BMSB), is a newly invasive species in the eastern USA that is rapidly spreading from the original point of establishment in Allentown, PA. In its native range, the BMSB is reportedly attracted to methyl (E,E,Z)-2,4,6-decatrienoate, the male-produced pheromone of another pentatomid common in eastern Asia, Plautia stali Scott. In North America, Thyanta spp. are the only pentatomids known to produce methyl 2,4,6-decatrienoate [the (E,Z,Z)-isomer] as part of their pheromones. Methyl 2,4,6-decatrienoates were field-tested in Maryland to monitor the spread of the BMSB and to explore the possibility that Thyanta spp. are an alternate host for parasitic tachinid flies that use stink bug pheromones as host-finding kairomones. Here we report the first captures of adult and nymph BMSBs in traps baited with methyl (E,E,Z)-2,4,6-decatrienoate in central Maryland and present data verifying that the tachinid, Euclytia flava (Townsend), exploits methyl (E,Z,Z)-2,4,6-decatrienoate as a kairomone. We also report the unexpected finding that various isomers of methyl 2,4,6-decatrienoate attract Acrosternum hilare (Say), although this bug apparently does not produce methyl decatrienoates. Other stink bugs and tachinids native to North America were also attracted to methyl 2,4,6-decatrienoates. These data indicate there are Heteroptera in North America in addition to Thyanta spp. that probably use methyl 2,4,6-decatrienoates as pheromones. The evidence that some pentatomids exploit the pheromones of other true bugs as kairomones to find food or to congregate as a passive defense against tachinid parasitism is discussed.     

2007～2008年世界塑料工业进展

收集了2007年7月～2008年6月世界塑料工业的相关资料,介绍了2007～2008年国外塑料工业的发展情况,提供了世界塑料产量、消费量及全球各类树脂的需求量及产能情况.按通用热塑性树脂(聚乙烯、聚丙烯、聚苯乙烯、聚氯乙烯、ABS树脂)、工程塑料(尼龙、聚碳酸酯、聚甲醛、热塑性聚酯、聚苯醚)、特种工程塑料(聚苯·硫醚、液晶聚合物、聚醚醚酮)、通用热固性树脂(酚醛、聚氨酯、不饱和聚酯树脂、环氧树脂)不同品种的顺序,对树脂的产量、消费量、供需状况及合成工艺、产品应用开发、树脂品种的延伸及应用的进一步扩展等技术作了详细介绍.     

2005～2006年国外塑料工业进展

收集了2005年7月～2006年6月国外塑料工业的相关资料,介绍了2005—2006年国外塑料工业的发展情况。提供了世界塑料产量、消费量及全球各类树脂生产量以及各国塑料制品的进出口情况。作为对比,介绍了中国塑料的生产情况。按通用热塑性树脂（聚乙烯、聚丙烯、聚苯乙烯、聚氯乙烯、ABS树脂）、工程塑料（聚酰胺、聚碳酸酯、聚甲醛、热塑性聚酯、聚苯醚）、通用热固性树脂（酚醛、聚氨酯、不饱和树脂、环氧树脂）、特种工程塑料（聚苯硫醚、液晶聚合物、聚醚醚酮）的品种顺序,对树脂的产量、消费量、供需状况及合成工艺、产品开发、树脂品种的延伸及应用的扩展作了详细的介绍。