共查询到20条相似文献,搜索用时 187 毫秒
1.
谢榕 《冶金矿山设计与建设》1995,27(4):28-31
通过以200t/30m满水条件的水塔实例计算,定性定量地分析了按新结构规范对国标S844图集进行修编时所遇到的问题及考虑新老规范衔接后的解决办法,可供设计参考。 相似文献
2.
新的黄土规范国际标准“湿陷性黄土地区建筑规范”(GBJ25—90)发布已整整五年,在这期间我在工程实践中学习使用黄土规范,用以指导工程实践,收到明显的社会经济效益,对规范的理解也逐渐加深,也发现新规范存在的某些问题。1明确了以地基处理为主的综合措施的... 相似文献
3.
4.
5.
6.
规范中小煤矿发展的几个问题 总被引:4,自引:0,他引:4
分析了煤炭经济运行好转和关闭整顿煤矿效果明显的形势,论述了中小煤炭企业要规范发展是客观发展的必然,并提出了中小煤矿规范发展的具体建设和新一年的工作按排。 相似文献
7.
随着社会主义计划经济向市场经济转变及社会主义市场经济体制改革的不断深入,亦为适应世界经济全球化发展和加入WTO后我国工程造价管理与国际惯例接轨的需要,传统定额计价模式在目前形式下已无法满足以市场为核心的竞争主体,为此,我国工程界各专家、学者在借鉴国外先进的工程造价管理经验的同时,结合我国建筑行情,提出了工程量清单订价规范。为此,2003年国家标准.《建设工程工程量清单计价规范》(GB50500—2003)颁布实施,建立以工程量清单为平台的新工程量计价规范,开始了对现行计价方法国际化接轨的进程。在这传统定额计价与工程量清单计价规范交替之季,我们工程造价管理人员该如何尽快从传统定额计价模式脱出,转变到工程量清单计价模式,以适应这一新标准、新规范,这就要求工程造价管理人员对传统定额计价和工程量清单计价从概念和实施过程上进行理解分析。 相似文献
8.
论述了由于铁山矿床矿石资源的组分变化,原工业指标不能指导采选生产,经研究该矿床的矿石性质,结合生产实际,按新规范对工业指标进行了修订,取得了较好的效果。 相似文献
9.
墙下桩基连续承台梁是房屋设计中经常遇到的,随着砌体结构新规范的施用,规范(GB50003—2001)对连续墙梁的计算作了详细的规定,将连续墙梁的计算方法引入墙下桩基连续承台梁,使墙下桩基连续承台梁的设计计算更加安全可靠、经济合理,且计算简便,便于操作。 相似文献
10.
11.
国内外金刚石钻头的部分技术进展 总被引:3,自引:0,他引:3
收集和介绍了一些国内外金刚石钻头技术研究的发展前沿,从新材料新工艺的应用、新设计思路、先进设计手段等方面对金刚石钻头设计和制造技术的最新进展加以论述,可为国内金刚石钻头的设计制造提供参考。 相似文献
12.
自20世纪80年代以来,设计形态、设计意识、设计理念,在不同的设计领域都呈现出多元化发展态势,绿色设计、环保设计、可持续发展设计等观念已渗透到各行各业,而这些设计观念可归结为一点,即都注重人与自然、社会、环境的有机结合。在这种情况下,室内设计行业也随之展现出一些新的特点。 相似文献
13.
国汉军 《煤炭学报(英文版)》2004,10(2):95-100
Two design axioms and axiomatic approach were discussed. As an example of application, design process of a new style single prop was illustrated in term of axioms. 相似文献
14.
An innovative design solution is presented in this paper; it allows the enhancement of structural resistance and the dynamic performances of a vibrating screen for inert materials. The new design does not significantly affect the geometry of the traditional screens, keeping the same global dimensions and almost the same mass value. In fact the aim of this study was to design a new vibrating screen having almost the same dimensions but that could give a much higher dynamic structural resistance at frequencies and load amplitudes much higher than the nominal ones. Numerical finite element models were generated to investigate the structural and dynamic behavior of a standard vibrating screen. These analyses allowed the modification of the geometrical parameters of the traditional screen and to design the new one. Accurate three-dimensional FE models were so generated in order to evaluate the best design solution, in terms of dynamic structural resistance, able to reduce the stress values at the most stressed area. The fatigue resistance of all the components of the new screen was checked, with particular attention to the welding joints. Experimental full scale tests on a prototype of the new screen were carried out in order to validate the numerical models and mostly to verify the structural integrity of the vibrating screen during the working conditions. Strains at the surface of the most stressed areas of the screen were measured in dynamic working conditions, at different frequencies and load amplitudes; these stress values were compared with the numerical ones in order to validate the numerical results. The new screen was patented. 相似文献
15.
针对目前大庆油田最深的一口风险探井--古龙1井,为了使套管满足空气钻井和经济性需要,首次使用组合套管柱设计方法,同时在设计中对套管强度进行三轴应力强度校核,分析了套管强度设计的误差,给出一套新的安全经济的套管柱设计方法,为以后超深井套管柱设计提供了一个新的思路,对于指导设计与现场施工具有重要的意义. 相似文献
16.
17.
18.
矿井水处理介于煤炭和化工行业之间,对项目的设计及建设提出了新的要求。为探讨水处理蒸发结晶间的设计方法,结合中天合创蒸发结晶间的工程特点,从结构选型、荷载取值及应力控制、节点设计、楼板设计、支撑设计、操作平台设计等方面进行了阐述和分析。在进行基础及主体设计时,探讨了饱和沙土的地基承载力,并对钢筋混凝土杯口基础的插入深度和杯壁厚度进行了理论推导。分析认为,该设计和分析过程可以为类似的工艺设计提供一定的参考。 相似文献
19.
20.