High-performance MIM capacitor using ALD high-k HfO/sub 2/-Al/sub 2/O/sub 3/ laminate dielectrics

For the first time, we successfully fabricated and demonstrated high performance metal-insulator-metal (MIM) capacitors with HfO/sub 2/-Al/sub 2/O/sub 3/ laminate dielectric using atomic layer deposition (ALD) technique. Our data indicates that the laminate MIM capacitor can provide high capacitance density of 12.8 fF//spl mu/m/sup 2/ from 10 kHz up to 20 GHz, very low leakage current of 3.2 /spl times/ 10/sup -8/ A/cm/sup 2/ at 3.3 V, small linear voltage coefficient of capacitance of 240 ppm/V together with quadratic one of 1830 ppm/V/sup 2/, temperature coefficient of capacitance of 182 ppm//spl deg/C, and high breakdown field of /spl sim/6 MV/cm as well as promising reliability. As a result, the HfO/sub 2/-Al/sub 2/O/sub 3/ laminate is a very promising candidate for next generation MIM capacitor for radio frequency and mixed signal integrated circuit applications.     

Improvement of voltage linearity in high-/spl kappa/ MIM capacitors using HfO/sub 2/-SiO/sub 2/ stacked dielectric

It is demonstrated that the voltage coefficients of capacitance (VCC) in high-/spl kappa/ metal-insulator-metal (MIM) capacitors can be actively engineered and voltage linearity can be significantly improved maintaining high capacitance density, by using a stacked insulator structure of high-/spl kappa/ and SiO/sub 2/ dielectrics. A MIM capacitor with capacitance density of 6 fF/spl mu/m/sup 2/ and quadratic VCC of only 14 ppm/V/sup 2/ has been demonstrated together with excellent frequency and temperature dependence (temperature coefficients of capacitance of 54 ppm /spl deg/C) as well as low leakage current of less than 10 nA/cm/sup 2/ up to 4 V at 125 /spl deg/C.     

RF, DC, and reliability characteristics of ALD HfO/sub 2/-Al/sub 2/O/sub 3/ laminate MIM capacitors for Si RF IC applications

High-performance metal-insulator-metal capacitors using atomic layer-deposited HfO/sub 2/-Al/sub 2/O/sub 3/ laminate are fabricated and characterized for RF and mixed-signal applications. The laminate capacitor can offer high capacitance density (12.8 fF//spl mu/m/sup 2/) up to 20 GHz, low leakage current of 4.9/spl times/10/sup -8/ A/cm/sup 2/ at 2 V and 125/spl deg/C, and small linear voltage coefficient of capacitance of 211 ppm/V at 1 MHz, which can easily satisfy RF capacitor requirements for year 2007 according to the International Technology Roadmap for Semiconductors. In addition, effects of constant voltage stress and temperature on leakage current and voltage linearity are comprehensively investigated, and dependences of quadratic voltage coefficient of capacitance (/spl alpha/) on frequency and thickness are also demonstrated. Meanwhile, the underlying mechanisms are also discussed.     

MIM capacitors using atomic-layer-deposited high-/spl kappa/ (HfO/sub 2/)/sub 1-x/(Al/sub 2/O/sub 3/)/sub x/ dielectrics

Metal-insulator-metal (MIM) capacitors with (HfO/sub 2/)/sub 1-x/(Al/sub 2/O/sub 3/)/sub x/ high-/spl kappa/ dielectric films were investigated for the first time. The results show that both the capacitance density and voltage/temperature coefficients of capacitance (VCC/TCC) values decrease with increasing Al/sub 2/O/sub 3/ mole fraction. It was demonstrated that the (HfO/sub 2/)/sub 1-x/(Al/sub 2/O/sub 3/)/sub x/ MIM capacitor with an Al/sub 2/O/sub 3/ mole fraction of 0.14 is optimized. It provides a high capacitance density (3.5 fF//spl mu/m/sup 2/) and low VCC values (/spl sim/140 ppm/V/sup 2/) at the same time. In addition, small frequency dependence, low loss tangent, and low leakage current are obtained. Also, no electrical degradation was observed for (HfO/sub 2/)/sub 1-x/(Al/sub 2/O/sub 3/)/sub x/ MIM capacitors after N/sub 2/ annealing at 400/spl deg/C. These results show that the (HfO/sub 2/)/sub 0.86/(Al/sub 2/O/sub 3/)/sub 0.14/ MIM capacitor is very suitable for capacitor applications within the thermal budget of the back end of line process.     

DRAM plate electrode bias optimization for reducing leakage current in UV-O/sub 3/ and O/sub 2/ annealed CVD deposited Ta/sub 2/O/sub 5/ dielectric films

A new plate biasing scheme is described which allowed the use of 65% higher supply voltage without increasing the leakage current for the UV-O/sub 3/ and O/sub 2/ annealed chemical-vapor-deposited tantalum pentaoxide dielectric film capacitors in stacked DRAM cells. Dielectric leakage was reduced by biasing the capacitor plate electrode to a voltage lower than the conventionally used value of V/sub cc//2. Ta/sub 2/O/sub 5/ films with 3.9 nm effective gate oxide, 8.5 fF//spl mu/m/sup 2/ capacitance and <0.3 /spl mu/A/cm/sup 2/ leakage at 100/spl deg/C and 3.3 V supply are demonstrated.<>     

Fully silicided NiSi gate on La/sub 2/O/sub 3/ MOSFETs

We have fabricated the fully silicided NiSi on La/sub 2/O/sub 3/ for n- and p-MOSFETs. For 900/spl deg/C fully silicided CoSi/sub 2/ on La/sub 2/O/sub 3/ gate dielectric with 1.5 nm EOT, the gate dielectric has large leakage current by possible excess Co diffusion at high silicidation temperature. In sharp contrast, very low gate leakage current density of 2/spl times/10/sup -4/ A/cm/sup 2/ at 1 V is measured for 400/spl deg/C formed fully silicided NiSi and comparable with Al gate. The extracted work function of NiSi was 4.42 eV, and the corresponding threshold voltages are 0.12 and -0.70 V for respective n- and p-MOSFETs. Electron and hole mobilities of 156 and 44 cm/sup 2//V-s are obtained for respective n- and p-MOSFETs, which are comparable with the HfO/sub 2/ MOSFETs without using H/sub 2/ annealing.     

A high-density MIM capacitor (13 fF//spl mu/m/sup 2/) using ALD HfO/sub 2/ dielectrics

Metal-insulator-metal (MIM) capacitors with different HfO/sub 2/ thickness have been investigated. The results show that both the capacitance density and voltage coefficients of capacitance (VCCs) increase with decreasing HfO/sub 2/ thickness. In addition, it is found that the VCCs decrease logarithmically with increasing thickness. Furthermore, the MIM capacitor with 10-nm HfO/sub 2/ shows a record high capacitance density of 13 fF//spl mu/m/sup 2/ and a VCC of 607 ppm/V, which can meet the requirement of the International Technology Roadmap for Semiconductors. It can also provide a low leakage current of 5.95 /spl times/ 10/sup -8/A/cm/sup 2/ at room temperature at 1 V, low tangent values below 0.05, and a small frequency dependence. These results indicate that the devices are suitable for use in silicon integrated circuit applications.     

Metal-insulator-metal RF bypass capacitor using niobium oxide (Nb/sub 2/O/sub 5/) with HfO/sub 2//Al/sub 2/O/sub 3/ barriers

A high capacitance density (C/sub density/) metal-insulator-metal (MIM) capacitor with niobium pentoxide (Nb/sub 2/O/sub 5/) whose k value is higher than 40, is developed for integrated RF bypass or decoupling capacitor application. Nb/sub 2/O/sub 5/ MIM with HfO/sub 2//Al/sub 2/O/sub 3/ barriers delivers a high C/sub density/ of >17 fF//spl mu/m/sup 2/ with excellent RF properties, while maintaining comparable leakage current and reliability properties with other high-k dielectrics. The capacitance from the dielectric is shown to be stable up to 20 GHz, and resonant frequency of 4.2 GHz and Q of 50 (at 1 GHz) is demonstrated when the capacitor is integrated using Cu-BEOL process.     

Electrical characteristics of 8-/spl Aring/ EOT HfO/sub 2//TaN low thermal-budget n-channel FETs with solid-phase epitaxially regrown junctions

The authors demonstrate high-performing n-channel transistors with a HfO/sub 2//TaN gate stack and a low thermal-budget process using solid-phase epitaxial regrowth of the source and drain junctions. The thinnest devices have an equivalent oxide thickness (EOT) of 8 /spl Aring/, a leakage current of 1.5 A/cm/sup 2/ at V/sub G/=1 V, a peak mobility of 190 cm/sup 2//V/spl middot/s, and a drive-current of 815 /spl mu/A//spl mu/m at an off-state current of 0.1 /spl mu/A//spl mu/m for V/sub DD/=1.2 V. Identical gate stacks processed with a 1000-/spl deg/C spike anneal have a higher peak mobility at 275 cm/sup 2//V/spl middot/s, but a 5-/spl Aring/ higher EOT and a reduced drive current at 610 /spl mu/A//spl mu/m. The observed performance improvement for the low thermal-budget devices is shown to be mostly related to the lower EOT. The time-to-breakdown measurements indicate a maximum operating voltage of 1.6 V (1.2 V at 125 /spl deg/C) for a ten-year lifetime, whereas positive-bias temperature-instability measurements indicate a sufficient lifetime for operating voltages below 0.75 V.     

Low-frequency noise in submicrometer MOSFETs with HfO/sub 2/, HfO/sub 2//Al/sub 2/O/sub 3/ and HfAlO/sub x/ gate stacks

Low-frequency noise measurements were performed on p- and n-channel MOSFETs with HfO/sub 2/, HfAlO/sub x/ and HfO/sub 2//Al/sub 2/O/sub 3/ as the gate dielectric materials. The gate length varied from 0.135 to 0.36 /spl mu/m with 10.02 /spl mu/m gate width. The equivalent oxide thicknesses were: HfO/sub 2/ 23 /spl Aring/, HfAlO/sub x/ 28.5 /spl Aring/ and HfO/sub 2//Al/sub 2/O/sub 3/ 33 /spl Aring/. In addition to the core structures with only about 10 /spl Aring/ of oxide between the high-/spl kappa/ dielectric and silicon substrate, there were "double-gate oxide" structures where an interfacial oxide layer of 40 /spl Aring/ was grown between the high-/spl kappa/ dielectric and Si. DC analysis showed low gate leakage currents in the order of 10/sup -12/A(2-5/spl times/10/sup -5/ A/cm/sup 2/) for the devices and, in general, yielded higher threshold voltages and lower mobility values when compared to the corresponding SiO/sub 2/ devices. The unified number-mobility fluctuation model was used to account for the observed 1/f noise and to extract the oxide trap density, which ranged from 1.8/spl times/10/sup 17/ cm/sup -3/eV/sup -1/ to 1.3/spl times/10/sup 19/ cm/sup -3/eV/sup -1/, somewhat higher compared to conventional SiO/sub 2/ MOSFETs with the similar device dimensions. There was no evidence of single electron switching events or random telegraph signals. The aim of this paper is to present a general discussion on low-frequency noise characteristics of the three different high-/spl kappa//gate stacks, relative comparison among them and to the Si--SiO/sub 2/ system.     

Very high density RF MIM capacitors (17 fF//spl mu/m/sup 2/) using high-/spl kappa/ Al/sub 2/O/sub 3/ doped Ta/sub 2/O/sub 5/ dielectrics

Using high-/spl kappa/ Al/sub 2/O/sub 3/ doped Ta/sub 2/O/sub 5/ dielectric, we have obtained record high MIM capacitance density of 17 fF//spl mu/m/sup 2/ at 100 kHz, small 5% capacitance reduction to RF frequency range, and low leakage current density of 8.9/spl times/10/sup -7/ A/cm/sup 2/. In combination of both high capacitor density and low leakage current density, a very low leakage current of 5.2/spl times/10/sup -12/ A is calculated for a typical large 10 pF capacitor used in RF IC that is even smaller than that of a deep sub-/spl mu/m MOSFET. This very high capacitance density with good MIM capacitor characteristics can significantly reduce the chip size of RF ICs.     

Low-frequency noise in submicrometer MOSFETs with HfO/sub 2/, HfO/sub 2//Al/sub 2/O/sub 3/ and HfAlO/sub x/ gate stacks

Low-frequency noise measurements were performed on p- and n-channel MOSFETs with HfO/sub 2/, HfAlO/sub x/ and HfO/sub 2//Al/sub 2/O/sub 3/ as the gate dielectric materials. The gate length varied from 0.135 to 0.36 /spl mu/m with 10.02 /spl mu/m gate width. The equivalent oxide thicknesses were: HfO/sub 2/ 23 /spl Aring/, HfAlO/sub x/ 28.5 /spl Aring/ and HfO/sub 2//Al/sub 2/O/sub 3/ 33 /spl Aring/. In addition to the core structures with only about 10 /spl Aring/ of oxide between the high-K dielectric and silicon substrate, there were "double-gate oxide" structures where an interfacial oxide layer of 40 /spl Aring/ was grown between the high-K dielectric and Si. DC analysis showed low gate leakage currents in the order of 10/sup -12/ A(2-5 /spl times/ 10/sup -5/ A/cm/sup 2/) for the devices and, in general, yielded higher threshold voltages and lower mobility values when compared to the corresponding SiO/sub 2/ devices. The unified number-mobility fluctuation model was used to account for the observed 1/f noise and to extract the oxide trap density, which ranged from 1.8 /spl times/ 10/sup 17/ cm/sup -3/ eV/sup -1/ to 1, 3 /spl times/ 10/sup 19/ cm/sup -3/ eV/sup -1/ somewhat higher compared to conventional SiO/sub 2/ MOSFETs with the similar device dimensions. There was no evidence of single electron switching events or random telegraph signals. The aim of this paper is to present a general discussion on low-frequency noise characteristics of the three different high-K/gate stacks, relative comparison among them and to the Si-SiO/sub 2/ system.     

High-density MIM capacitors using AlTaO/sub x/ dielectrics

The authors have obtained good MIM capacitor integrity of high-capacitance density of 10 fF//spl mu/m/sup 2/ using high-/spl kappa/ AlTaO/sub x/ fabricated at 400/spl deg/C. In addition, small voltage dependence of capacitance of <600 ppm (quadratic voltage coefficient of only 130 ppm/V/sup 2/) is obtained at 1 GHz using their mathematical derivation from measured high-frequency S parameters. These good results ensure the high-/spl kappa/ AlTaO/sub x/ MIM capacitor technology is useful for high-precision circuits operated at the RF frequency regime.     

High-performance nonvolatile HfO/sub 2/ nanocrystal memory

In this letter, we demonstrate high-performance nonvolatile HfO/sub 2/ nanocrystal memory utilizing spinodal phase separation of Hf-silicate thin film by 900/spl deg/C rapid thermal annealing. With this technique, a remarkably high nanocrystal density of as high as 0.9 /spl sim/ 1.9 /spl times/ 10/sup 12/ cm/sup -2/ with an average size <10 nm can be easily achieved. Because HfO/sub 2/ nanocrystals are well embedded inside an SiO/sub 2/-rich matrix and due to their sufficiently deep energy level, we, for the first time, have demonstrated superior characteristics of the nanocrystal memories in terms of a considerably large memory window, high-speed program/erase (P/E) (1 /spl mu/s/0.1 ms), long retention time greater than 10/sup 8/ s for 10% charge loss, and excellent endurance after 10/sup 6/ P/E cycles.     

Performance of polysilicon gate HfO/sub 2/ MOSFETs on [100] and [111] silicon substrates

Mobility dependence on Si substrate orientations was investigated for HfO/sub 2/ MOSFETs for the first time. High-temperature (600 /spl deg/C) forming gas (FG) annealing (HT-FGA) was applied on the devices on both [100] and [111] substrates to evaluate the mobility for optimal interfacial quality. Using HT-FGA, D/sub it/ of the [111] devices was reduced down below 1 /spl times/ 10/sup 12/ cm/sup -2/V/sup -1/. Similar to SiO/sub 2/ devices, NMOS mobility of the [111] devices was lower than that of the [100] devices at higher effective fields, while it was reversed for PMOSFETs.     

Characteristics of HfO/sub 2/ pMOSFET prepared by B/sub 2/H/sub 6/ plasma doping and KrF excimer laser annealing

The electrical characteristics of HfO/sub 2/ pMOSFETs prepared by B/sub 2/H/sub 6/ plasma doping and excimer laser annealing were investigated. Various metal gate electrodes were evaluated to protect the high-/spl kappa/ oxide during laser irradiation. Although the aluminum gate electrode showed superior reflectivity to the laser, the equivalent oxide thickness was increased due to the interaction between aluminum and HfO/sub 2/, which resulted in reduced capacitance. In contrast, the Al-TaN stacked gate showed good reflectivity up to laser energy of 500 mJ/cm/sup 2/ and improved capacitance was obtained compared with the Al gate. For the first time, the electrical characteristics of a HfO/sub 2/ pMOSFET with an Al-TaN gate fabricated by plasma doping and excimer laser annealing were demonstrated. It was also demonstrated that plasma doping and excimer laser annealing combined with a metal gate could be applied for high-/spl kappa/ oxide MOSFET fabrication.     

TDDB and polarity-dependent reliability of high-quality, ultrathin CVD HfO/sub 2/ gate stack with TaN gate electrode

In this letter, we present a comprehensive study on longterm reliability of ultrathin TaN-gated chemical vapor deposition gate stack with EOT=8.5-10.5. It is found that, due to the asymmetric band structure of HfO/sub 2/ gate stack with an interfacial layer, the HfO/sub 2/ gate stack shows polarity-dependent leakage current, critical defect density, and defect generation rate, under gate and substrate injection. However, no such polarity dependence of time-to-breakdown (T/sub BD/) is observed when T/sub BD/ is plotted as a function of gate voltage. The 10-year lifetime of an HfO/sub 2/ gate stack is projected to be Vg=-1.63 V for the equivalent oxide thickness (EOT) =8.6 and Vg=-1.88 V for EOT=10.6 at 25/spl deg/C. These excellent reliability characteristics are attributed to reduced leakage current of HfO/sub 2/ gate stack with physically thicker films that result in larger critical defect density and Weibull slope to that of SiO/sub 2/ for the same EOT. However, at 150/spl deg/C, and with area scaling to 0.1 cm/sup 2/ and low percentile of 0.01%, the maximum allowed voltages are projected to Vg=-0.6 V and -0.75 V for EOT of 8.6, and 10.6, respectively.     

High-performance Pt/SrBi/sub 2/Ta/sub 2/O/sub 9//HfO/sub 2//Si structure for nondestructive readout memory

Metal-ferroelectric-insulator-semiconductor (MFIS) capacitors with 390-nm-thick SrBi/sub 2/Ta/sub 2/O/sub 9/ (SBT) ferroelectric film and 8-nm-thick hafnium oxide (HfO/sub 2/) layer on silicon substrate have been fabricated and characterized. It is demonstrated for the first time that the MFIS stack exhibits a large memory window of around 1.08 V at an operation voltage of 3.5 V. Moreover, the MFIS memory structure suffers only 18% degradation in the memory window after 10/sup 9/ switching cycles. The excellent performance is attributed to the formation of well-crystallized SBT perovskite thin film on top of the HfO/sub 2/ buffer layer, as evidenced by the distinctive sharp peaks in X-ray diffraction (XRD) spectra. In addition to its relatively high /spl kappa/ value, HfO/sub 2/ also serves as a good seed layer for SBT crystallization, making the proposed Pt/SrBi/sub 2/Ta/sub 2/O/sub 9//HfO/sub 2//Si structure ideally suitable for low-voltage and high-performance ferroelectric memories.     

Lanthanide (Tb)-doped HfO/sub 2/ for high-density MIM capacitors

A high-density metal-insulator-metal (MIM) capacitor with a lanthanide-doped HfO/sub 2/ dielectric prepared by physical vapor deposition (PVD) is presented for the first time. A significant improvement was shown in both the voltage coefficient of capacitance (VCC) and the leakage current density of MIM capacitor, yet the high capacitance density of HfO/sub 2/ dielectrics was maintained by achieving the doping of Tb with an optimum concentration in HfO/sub 2/. This technique allows utilizing thinner dielectric film in MIM capacitors and achieving a capacitance density as high as 13.3 fF//spl mu/m/sup 2/ with leakage current and VCC values that fully meet requirements from year 2005 for radio frequency (RF) bypass capacitors applications.     

The electrical and material characterization of hafnium oxynitride gate dielectrics with TaN-gate electrode

Electrical and material characteristics of hafnium oxynitride (HfON) gate dielectrics have been studied in comparison with HfO/sub 2/. HfON was prepared by a deposition of HfN followed by post-deposition-anneal (PDA). By secondary ion mass spectroscopy (SIMS), incorporated nitrogen in the HfON was found to pile up at the dielectric/Si interface layer. Based on the SIMS profile, the interfacial layer (IL) composition of the HfON films appeared to be like hafnium-silicon-oxynitride (HfSiON) while the IL of the HfO/sub 2/ films seemed to be hafnium-silicate (HfSiO). HfON showed an increase of 300/spl deg/C in crystallization temperature compared to HfO/sub 2/. Dielectric constants of bulk and interface layer of HfON were 21 and 14, respectively. The dielectric constant of interfacial layer in HfON (/spl sim/14) is larger than that of HfO/sub 2/ (/spl sim/7.8). HfON dielectrics exhibit /spl sim/10/spl times/ lower leakage current (J) than HfO/sub 2/ for the same EOTs before post-metal anneal (PMA), while /spl sim/40/spl times/ lower J after PMA. The improved electrical properties of HfON over HfO/sub 2/ can be explained by the thicker physical thickness of HfON for the same equivalent oxide thickness (EOT) due to its higher dielectric constant as well as a more stable interface layer. Capacitance hysteresis (/spl Delta/V) of HfON capacitor was found to be slightly larger than that of HfO/sub 2/. Without high temperature forming gas anneal, nMOSFET with HfON gate dielectric showed a peak mobility of 71 cm/sup 2//Vsec. By high temperature forming gas anneal at 600/spl deg/C, mobility improved up to 256 cm/sup 2//Vsec.