High-mobility ultrathin strained Ge MOSFETs on bulk and SOI with low band-to-band tunneling leakage: experiments

For the first time, the tradeoffs between higher mobility (smaller bandgap) channel and lower band-to-band tunneling (BTBT) leakage have been investigated. In particular, through detailed experiments and simulations, the transport and leakage in ultrathin (UT) strained germanium (Ge) MOSFETs on bulk and silicon-on-insulator (SOI) have been examined. In the case of strained Ge MOSFETs on bulk Si, the resulting optimal structure obtained was a UT low-defect 2-nm fully strained Ge epi channel on relaxed Si, with a 4-nm Si cap layer. The fabricated device shows very high mobility enhancements >3.5/spl times/ over bulk Si devices, 2/spl times/ mobility enhancement and >10/spl times/ BTBT reduction over 4-nm strained Ge, and surface channel 50% strained SiGe devices. Strained SiGe MOSFETs having UT (T/sub Ge/<3 nm) very high Ge fraction (/spl sim/ 80%) channel and Si cap (T/sub Si cap/<3 nm) have also been successfully fabricated on thin relaxed SOI substrates (T/sub SOI/=9 nm). The tradeoffs in obtaining a high-mobility (smaller bandgap) channel with low tunneling leakage on UT-SOI have been investigated in detail. The fabricated device shows very high mobility enhancements of >4/spl times/ over bulk Si devices, >2.5/spl times/ over strained silicon directly on insulator (SSDOI; strained to 20% relaxed SiGe) devices, and >1.5/spl times/ over 60% strained SiGe (on relaxed bulk Si) devices.     

氧化对SOI基SiGe薄膜残余应变弛豫的影响

研究了氧化对外延在SOI衬底上的SiGe薄膜的残余应变弛豫过程的影响.通过对SiGe薄膜采用不同工艺的氧化,从而了解不同氧化条件对SOI基SiGe薄膜的应变弛豫过程的影响.氧化将会促使SiGe薄膜中的Ge原子扩散到SOI材料的顶层硅中.而SiGe薄膜的残余应变弛豫过程将会与Ge原子的扩散过程同时进行,通过对SiGe薄膜和SOI顶层硅中位错分布的分析发现:在氧化过程中,SiGe薄膜和SOI衬底之间存在一个应力传递的过程.     

Pure germanium epitaxial growth on thin strained silicon-germanium graded layers on bulk silicon substrate for high-mobility channel metal-oxide-semiconductor field-effect transistors

We demonstrate epitaxially grown high-quality pure germanium (Ge) on bulk silicon (Si) substrates by ultra-high-vacuum chemical vapor deposition (UHVCVD) without involving growth of thick relaxed SiGe buffer layers. The Ge layer is grown on thin compressively strained SiGe layers with rapidly varying Ge mole fraction on Si substrates resulting in several SiGe interfaces between the Si substrate and the pure Ge layer at the surface. The presence of such interfaces between the Si substrate and the Ge layer results in blocking threading dislocation defects, leading to a defect-free pure Ge epitaxial layer on the top. Results from various material characterization techniques on these grown films are shown. In addition, capacitance-voltage (CV) measurements of metal-oxide-semiconductor (MOS) capacitors fabricated on this structure are also presented, showing that the grown structure is ideal for high-mobility metal-oxide-semiconductor field-effect transistor applications.     

Thickness Dependence of Hole Mobility in Ultrathin SiGe-Channel p-MOSFETs

A fundamental understanding of the mechanisms responsible for the dependence of hole mobility on SiGe channel layer thickness is presented for channel thicknesses down to 1.8 nm. This understanding is critical to the design of strained SiGe p-MOSFETs, as lattice mismatch limits the thickness of SiGe that can be grown on Si and as Ge outdiffusion during processing reduces the Ge fraction. Temperature-dependent measurements are used to extract the phonon-limited mobility as a function of SiGe channel thickness for strained Si_0.57Ge_0.43 heterostructures on bulk Si. The hole mobility is shown to degrade significantly for channel thickness below 4 nm due to a combination of phonon and interface scattering. Due to the finite nature of the quantum-well barrier, SiGe film thickness fluctuation scattering is not significant in this structure for channel thickness greater than 2.8 nm.     

采用低温Si技术的Si/SiGe异质结P-MOSFET

针对S i/S iG e p-M O SFET的虚拟S iG e衬底厚度较大(大于1μm)的问题,采用低温S i技术在S i缓冲层和虚拟S iG e衬底之间M BE生长低温-S i层。S iG e层应力通过低温-S i层释放,达到应变弛豫。XRD和AFM测试表明,S i0.8G e0.2层厚度可减薄至300 nm,其弛豫度大于85%,表面平均粗糙度仅为1.02 nm。试制出应变S i/S iG e p-M O SFET器件,最大空穴迁移率达到112 cm2/V s,其性能略优于目前多采用1μm厚虚拟S iG e衬底的器件。     

Resonant cavity enhanced photoluminescence of tensile strained Ge/SiGe quantum wells on silicon-on-insulator substrate

The tensile strained Ge/SiGe multiple quantum wells （MQWs） grown on a silicon-on-insulator （SOI） substrate were fabricated successfully by ultra-high chemical vapor deposition. Room temperature direct band photoluminescence from Ge quantum wells on SOI substrate is strongly modulated by Fabry-Perot cavity formed between the surface of Ge and the interface of buried SiO2. The photoluminescence peak intensity at 1.58 μm is enhanced by about 21 times compared with that from the Ge/SiGe quantum wells on Si substrate, and the full width at half maximum （FWHM） is significantly reduced. It is suggested that tensile strained Ge/SiGe multiple quantum wells are one of the promising materials for Si-based microcavity lijzht emitting devices.     

Evaluation of super-critical thickness strained-Si on insulator (sc-SSOI) substrate

Crystal quality and strain distribution in SOI layer of conventional strained-Si on insulator (SSOI) and super-critical thickness strained-Si on insulator (sc-SSOI) were evaluated by in-plane X-ray diffraction (XRD), Raman spectroscopy, and other techniques. The surface defect distribution measured by wafer inspection system shows pit-type and line defects in both SSOI layers. More specifically, the sc-SSOI material has more line defects than conventional SSOI layers. Cross-hatched pattern defects were observed using X-ray topography (XRT) measurements. Raman mapping of 300 mm wafers shows the strain at the center of the wafer is larger than at the edge. In magnified close-up mapping, cross-hatched contrasts corresponding to misfit dislocations are observed, while the surface morphology is completely smoothed out. In-plane XRD measurements show the strain depth variations are quite uniform along the depth direction. The full width at half maximum (FWHM) of in-plane XRD peaks obtained from strained-Si layers is much larger than for un-strained SOI and bulk Si, reflecting poor crystal quality. SSOI was fabricated by the layer transfer of strained-Si on a virtual SiGe substrate. Therefore, we believe the crystal quality and strain distribution originate in the donor strained Si when virtual SiGe substrate is the starting material.     

Transition from the two- to three-dimensional growth of Ge films upon deposition onto relaxed SiGe/Si(001) buffer layers

The critical thickness of the two-dimensional growth of Ge on relaxed SiGe/Si(001) buffer layers different in Ge content is studied in relation to the parameters of the layers. It is shown that the critical thickness of the two-dimensional growth of Ge on SiGe buffer layers depends on the lattice mismatch between the film and the substrate and, in addition, is heavily influenced by Ge segregation during SiGe-layer growth and by variations in the growth-surface roughness upon the deposition of strained (stretched) Si layers. It is found that the critical thickness of the two-dimensional growth of Ge directly onto SiGe buffer layers with a Ge content of x = 11–36% is smaller than that in the case of deposition onto a Si (001) substrate. The experimentally detected increase in the critical thickness of the two-dimensional growth of Ge with increasing thickness of the strained (stretched) Si layer predeposited onto the buffer layer is attributed to a decrease in the growth-surface roughness and in the amount of Ge located on the surface as a result of segregation.     

用减压化学气相沉积技术制备应变硅材料

利用减压化学气相沉积技术，制备出应变Si/弛豫Si0.9Ge0.1/渐变组分弛豫SiGe/Si衬底. 通过控制组分渐变SiGe过渡层的组分梯度和适当优化弛豫SiGe层的外延生长工艺，有效地降低了表面粗糙度和位错密度.与Ge组分突变相比，采用线性渐变组分后，应变硅材料表面粗糙度从3.07nm减小到0.75nm，位错密度约为5E4cm-2，表面应变硅层应变度约为0.45%.     

应用400℃低温Si技术制备应变Si沟道pMOSFET

在利用分子束外延方法制备SiGe pMOSFET中引入了低温Si技术.通过在Si缓冲层和SiGe层之间加入低温Si层,提高了SiGe层的弛豫度.当Ge主分为20%时,利用低温Si技术生长的弛豫Si1-xGex层的厚度由UHVCVD制备所需的数微米降至400nm以内,AFM测试表明其表面均方粗糙度(RMS)小于1.02nm.器件测试表明,与相同制备过程的体硅pMOSFET相比,空穴迁移率最大提高了25%.     

Ultrathin-body strained-Si and SiGe heterostructure-on-insulator MOSFETs

The combination of channel mobility-enhancement techniques such as strain engineering with nonclassical MOS device architectures, such as ultrathin-body (UTB) or double-gate structures, offers the promise of maximizing current drive while maintaining the electrostatic control required for aggressive device scaling in future technology nodes. The tradeoff between transport enhancement and OFF-state leakage current is compared experimentally for UTB MOSFETs in two types of materials: 1) strained Si directly on insulator (SSDOI) and 2) strained Si/strained Si/sub 1-z/Ge/sub z/ (z=0.46-0.55)/strained Si heterostructure-on-insulator (HOI). SSDOI of moderate strain level (e.g. /spl sim/ 0.8%) yields high electron-mobility enhancements for all electron densities, while high strain levels (e.g. /spl sim/ 1.6%) are required to obtain hole-mobility enhancements at high inversion charge densities. HOI is demonstrated to have similar electron-mobility characteristics to SSDOI, while hole mobilities are improved and can be maintained at high inversion charge densities. Hole mobility in strained channels with thickness below 10 nm is studied and compared for SSDOI and HOI. As the channel thickness is reduced, mobility decreases, as in unstrained silicon-on-insulator (SOI), though hole-mobility enhancements are demonstrated into the ultrathin-channel regime. Increased OFF-state leakage currents are observed in HOI compared to SSDOI and SOI. For a 4-nm-thick buried SiGe layer, leakage is reduced relative to devices with thicker SiGe channels.     

应变Si1-xGex沟道PMOSFET空穴局域化研究

为充分利用应变 Si Ge材料相对于 Si较高的空穴迁移率 ,研究了 Si/Si Ge/Si PMOSFET中垂直结构和参数同沟道开启及空穴分布之间的依赖关系。在理论分析的基础上 ,以数值模拟为手段 ,研究了栅氧化层厚度、Si帽层厚度、Si Ge层 Ge组分及厚度、缓冲层厚度及衬底掺杂浓度对阈值电压、交越电压和空穴分布的影响与作用 ,特别强调了 δ掺杂的意义。模拟和分析表明 ,栅氧化层厚度、Si帽层厚度、Si Ge层 Ge组分、衬底掺杂浓度及 δ掺杂剂量是决定空穴分布的主要因素 ,而 Si Ge层厚度、缓冲层厚度和隔离层厚度对空穴分布并不敏感。最后总结了沟道反型及空穴分布随垂直结构及参数变化的一般规律 ,为优化器件设计提供了参考。     

Si/SiGe PMOSFET USING P^＋ IMPLANTATION TECHNOLOGY

Si/SiGe P-channel Metal-Oxide-Semiconductor Field Effect Transistor （PMOSFET） using P^＋ （phosphor ion） implantation technology is successfully fabricated. P^＋ implantation into SiGe virtual substrate induces a narrow defect region slightly below the SiGe/Si interface, which gives rise to strongly enhanced strain relaxation of SiGe virtual substrate. X-Ray Diffraction （XRD） tests show that the degree of relaxation of SiGe layer is 96% while 85% before implantation. After annealed, the sample appeared free of Threading Dislocation densities （TDs） within the SiGe layer to the limit of Transmission Electron Microscopy （TEM） analysis. Atomic Force Microscope （AFM） test of strained Si channel surface shows that Root Mean Square （RMS） is 1.1nm. The Direct Current （DC） characters measured by HP 4155B indicate that the maximum saturated transconductance is twice bigger than that of bulk Si PMOSFET.     

Ultrathin body SiGe-on-insulator pMOSFETs with high-mobility SiGe surface channels

A novel concept and a fabrication technique of strained SiGe-on-insulator (SGOI) pMOSFET are proposed and demonstrated. This device has an ultrathin strained SiGe channel layer, which is directly sandwiched by gate oxide and buried oxide layers. The mobility enhancement of 2.3 times higher than the universal mobility of conventional universal Si pMOSFETs was obtained for a pMOSFET with 19-nm-thick Si/sub 0.58/Ge/sub 0.42/ channel layer, which is formed by high-temperature oxidation of a Si/sub 0.9/Ge/sub 0.1/ layer grown on a Si-on-insulator (SOI) substrate. A fully depleted SGOI MOSFET with this simple single-layer body structure is promising for scaled SOI p-MOSFET with high current drive.     

High-quality crystalline layer transfer from a silicon-on-insulator substrate onto a sapphire substrate using wafer bonding

We demonstrate layer transfer of 150 nm of Si from a 200-mm, silicon-on-insulator (SOI) substrate onto a sapphire substrate using low-temperature wafer bonding (T=150°C). The crystalline quality and the thermal stability of the transferred Si layer were characterized by x-ray diffraction (XRD). A broadening of the (004) Si peak is observed only for anneal temperatures T_A≥800°C, indicating some degradation of the crystalline quality of the transferred Si film above these temperatures. The measured electron Hall mobility in the bonded Si layer is comparable to bulk silicon for T_A≤800°C, indicating excellent material quality.     

Strained MOSFETs on ordered SiGe dots

The potential of strained DOTFET technology is demonstrated. This technology uses a SiGe island as a stressor for a Si capping layer, into which the transistor channel is integrated. The structure information of fabricated samples is extracted from atomic force microscopy (AFM) measurements. Strain on the upper surface of a 30?nm thick Si layer is in the range of 0.7%, as supported by finite element calculations. The Ge content in the SiGe island is 30% on average, showing an increase towards the top of the island. Based on the extracted structure information, three-dimensional strain profiles are calculated and device simulations are performed. Up to 15% enhancement of the NMOS saturation current is predicted.     

Fully depleted n-MOSFETs on supercritical thickness strained SOI

Strained silicon-on-insulator (SSOI) is a new material system that combines the carrier transport advantages of strained Si with the reduced parasitic capacitance and improved MOSFET scalability of thin-film SOI. We demonstrate fabrication of highly uniform SiGe-free SSOI wafers with 20% Ge equivalent strain and report fully depleted n-MOSFET results. We show that enhanced mobility is maintained in strained Si films transferred directly to SiO/sub 2/ from relaxed Si/sub 0.8/Ge/sub 0.2/ virtual substrates, even after a generous MOSFET fabrication thermal budget. Further, we find the usable strained-Si thickness of SSOI significantly exceeds the critical thickness of strained Si/SiGe without deleterious leakage current effects typically associated with exceeding this limit.     

Hole transport in UTB MOSFETs in strained-Si directly on insulator with strained-Si thickness less than 5 nm

Hole transport is studied in ultrathin body (UTB) MOSFETs in strained-Si directly on insulator (SSDOI) with a Si thickness down to 1.4 nm. In these Ge-free SSDOI substrates, the Si is strained in biaxial tension with strain levels equivalent to strained-Si on relaxed SiGe, with Ge contents of 30 and 40% Ge. The hole mobility in SSDOI decreases slowly for Si thicknesses above 4 nm, but drops rapidly below that thickness. Relative to silicon-on-insulator control devices of equal thickness, SSDOI displays significant hole mobility enhancement for Si film thicknesses above 3.5 nm. Peak hole mobility is improved by 25% for 40% SSDOI relative to 30% SSDOI fabricated by the same method, demonstrating the benefits of strain engineering for 3.1-nm-thick UTB MOSFETs.     

Tensile-Strained Germanium CMOS Integration on Silicon

Monolithic integration of tensile-strained Si/ Germanium (Ge)-channel n-MOS and tensile-strained Ge p-MOS with ultrathin (equivalent oxide thickness ~14 Aring) HfO₂ gate dielectric and TaN gate stack on Si substrate is demonstrated. Defect-free Ge layer (279 nm) grown by ultrahigh vacuum chemical-vapor deposition is achieved using a two-step Ge-growth technique coupled with compliant Si/SiGe buffer layers. The epi-Ge layer experiences tensile strain of up to ~0.67% and exhibits a peak hole mobility of 250 cm²/V ldr s which is 100% higher than the universal Si hole mobility. The gate leakage current is two orders of magnitude lower compared to the reported results on Ge bulk.