共查询到20条相似文献,搜索用时 156 毫秒
1.
2.
CARR堆本体中设计有各类实验孔道(水平孔道和垂直孔道),以满足燃料元件和结构材料的辐照考验、各种放射性同位素辐照生产、单晶硅中子掺杂、中子物理实验研究、中子活化分析研究、中子散射实验、中子照相、在线同位素分离器研究等科研活动的需求。 CARR中垂直孔道共计22根,包括 相似文献
3.
堆中子活化分析是核技术应用的一个重要领域。近几年来随着中子活化分析技术的推广、应用,大量实验数据需要由计算机来处理。为此,我们在CANBERRA公司的JUPITER系统上开发了一个实际有效的中子活化分析应用软件包,从而实现了中子活化分析数据的自动化处理。 相似文献
4.
5.
韩国原子能研究院(KAERI)30MW的HANARO研究堆,其堆内中子活化分析辐照孔道NAA3号的热中子注量率为1.26×10^14cm^-2·s^-1,可用作基于临界增殖系数%的中子活化分析(k0-NAA)。本工作的目的是:①通过确定该中子活化分析方法所需要的中子谱参数来描述NAA3号辐照孔道;②通过建立探测效率曲线来标定Y射线能谱仪系统;③通过分析6种认证参考物来评定k0-NAA中子活化分析方法的性能,其中3种为天然生物物料,另3种为环境物料。从获得的结果可以看出,对生物样品和环境样品采用k0-NAA方法,可以分别定量确定多达25或35种元素。已确定元素的实验值与认证值之间的偏差通常在12%以内,大部分考虑不确定度后实验值与认证参考值的估计偏差(u-score)值低于2。结果证明:HANARO研究堆上实施的k0-NAA中子活化分析方法适用于生物样品和环境样品的多元素分析,具有较高的分析精度,而且k0-NAA中子活化分析方法还可进一步获得实际应用。 相似文献
6.
山东微堆1989年5月3日达到临界,现已安全运营200天,累计功率19800KW·h。根据本省任务要求,现安装了6条照射孔道、配备了3套计算机高纯锗γ能谱仪,用于微堆中子活化分析、中子辐照的科学研究和常规应用。1990年9月,山东微堆中子活化分析通过了国家级实验室计 相似文献
7.
用14MeV中子活化分析相对法测定钢或其它金属的氧含量时,由于标准和样品基体的差异,会造成它们中子自屏蔽与γ自吸收的不同。为此,需引入透射比因子(transmittance)修正测得的结果。利用物质对中子屏蔽及对γ吸收的规律计算透射比不易准确,故大多针对具体的分析装置,采用实验方法测定。I.Fujii以及J.Hoste等人曾测定了纵向(端面)接受辐照的圆柱状样品的透射比,本工作则是对横向(侧面)接受中子辐照的圆筒状钢样品的透射比进行测定,并利用测得的结果完成钢中氧的活化分析。 相似文献
8.
9.
10.
反应堆中子活化分析方法由于它的灵敏度高,已被广泛用于多种样品中汞的分析。1972年,西末雄首次将巯基联在棉花的大分子链上,制成了用来富集汞的巯基纤维。在此基础上,我们引用了巯基棉稳定汞作为反应堆中子活化分析辐照汞标准。棉花分子链上有许多-OH 相似文献
11.
介绍一套特殊的核物理实验装置,它由氦喷嘴装置,带传输装置和微机数据获取与分析系统组成,氦喷嘴装置和带传输装置将反应物从反应室传送到探测器前面,同时给出一个同步信号来控制获取系统,获取系统准确识别控制信号,产生一个明显的标识符来标记不同的样品。本系统对短寿命远离稳定线纱的研究有独特的优势。 相似文献
12.
13.
TC-SCAN滚装船货运安全检查站车辆检测信息系统的设计 总被引:1,自引:0,他引:1
港口滚装船货运安全检查系统在TC-SCAN集装箱检测系统的基础上研制出来的,相对于传统的集装箱检测系统,车辆检测流程更加复杂,介绍了该系统的车辆信息和图像信息(统称车辆检测信息)的获取、传输和管理. 相似文献
14.
15.
简要介绍了秦山三期消防系统的组成,详尽阐述了电厂运行几年来在消防运行管理和系统设备问题改进方面的良好实践。对系统设备和管理中仍然存在的比较突出的问题进行分析探讨并提出个人改进建议,以供今后消防系统的运行管理、变更改造作参考。 相似文献
16.
Refurbishment of steady state tokamak (SST-1) primarily focused at addressing the issues and bottle-necks involving various subsystems of SST-1 as observed during earlier commis- sioning attempts, have progressed significantly. Under the refurbishment spectrum, all joints in the superconducting magnet system have been re-fabricated as low DC leak tight joint resistances, all toroidal field (TF) magnets have been equipped with 5 K radiation shields on the inner side and successfully tested for their rated parameters in cold under nominal currents, all vessel sectors and modules have been baked and tested under representative conditions, supporting helium and ni- trogen cryogenic facilities have been made > 99% reliable in various envisaged operating scenarios of SST-1. The reassemblies of the critical subsystems of the SST-1 machine shell have progressed aggressively and are nearing completion. Auxiliaries such as the baking facility for the vacuum vessel and first wall components, current leads assembly distributions, synchronized timing sys- tem, reliable data acquisition and plasma control systems as well as essential diagnostics have also been readied towards the first plasma. A detailed engineering validation of the assembled SST-1 machine shell including field error measurements has been planned prior to first plasma attempts. 相似文献
17.
《核技术(英文版)》2016,(5):152-160
Safety system testing is one of the most rigorous and time-consuming requirements in the verification and validation process for reactor protection systems(RPSs).This paper presents the development of a test system for the fully digital and field-programmable gate array-based RPS of the solid fuel(SF) thorium-breeding molten salt pebble bed fluoride salt-cooled reactor(TMSR),denoted as the TMSR-SF1 project,developed by the Chinese Academy of Sciences.The test system is applied to the RPS to ensure that it fully meets its designed functions and system specifications.We first introduce the testing principles and methods.Then,the hardware component designs and the software program development of the test system are discussed.Finally,the test process and test results are discussed and summarized. 相似文献
18.
19.
20.
计算机逻辑编程技术在谱仪触发判选系统中的应用 总被引:1,自引:1,他引:0
PLD和FPGA是逐渐发展起来的可编程逻辑器件,可由用户用计算机编程实现需要的逻辑,本文简单介绍了器件的开发和在谱仪的触发判选系统中的应用。 相似文献