玉米秸秆生物法制取酒精的中间试验

建立了玉米秸秆采用蒸汽爆破预处理、纤维素酶水解和戊糖己糖同步发酵技术制取酒精的中间试验装置。玉米秸秆在1.6～2.0 MPa条件下蒸汽爆破预处理,在提高玉米秸秆对纤维素酶可及度的同时,玉米秸秆中纤维素、木聚糖和木质素损失分别为4.08%、40.02%和9.91%。里氏木霉以10%的原料制备纤维素酶,并用于降解剩余的90%的原料,滤纸酶活力和纤维素酶水解得率分别为2.27 FPIU/mL和71.3%。初始还原物浓度为43.65 g/L的水解糖液经树干毕赤酵母发酵16 h,还原物利用率和酒精得率分别为87.17%和0.43 g/g(酒精/消耗的糖)。     

纤维素燃料乙醇生产技术研究进展

纤维素燃料乙醇已成为下一代燃料乙醇的必然发展方向。文章综述了近年来以木质纤维素为原料生产燃料乙醇的关键技术,重点对物理法、化学法、蒸汽爆破法、生物法等木质纤维素原料预处理技术,酸水解、酶水解等水解(糖化)技术,以及直接发酵法、水解发酵两步法、同步水解发酵法等发酵工艺进行了总结,并指出了未来纤维素乙醇的产业化过程中必须解决的关键问题和发展趋势。     

木质纤维素转化为燃料乙醇的研究进展

以木质纤维素为原料生产燃料乙醇的生物转化方法包括预处理、酶水解和发酵过程,对这些过程中的技术进展以及解决现存问题的方法进行了评述。氨法爆破技术是较好的预处理方法,超声波、微波处理等新技术有助于改善酶水解。阐述了酶水解机理、纤维素酶的生产以及酶水解过程的优化方法。指出固定化酶糖化发酵技术在生物转化木质纤维原料技术中的前景广阔;选择合适的发酵方法,优化发酵过程,以及解决抑制问题对于提高乙醇产率尤为重要;利用基因重组技术构建旨在发酵混合糖的重组菌对于生产生物乙醇具有里程碑意义。     

植物纤维原料酶水解制取燃料乙醇的研究

综述了植物纤维原料酶水解制燃料乙醇的几种常见预处理方法,两步法发酵和同步糖化发酵,国内外植物纤维酶水解法制燃料乙醇产业化现状并总结了目前酶水解制取燃料乙醇存在的问题及对应的对策。     

植物纤维原料纤维素酶水解的研究

以麦草为原料,探讨纤维素酶水解植物纤维的适宜条件。麦草含大量的纤维素和聚戊糖,其中的纤维素在纤维素酶的作用下分解生成葡萄糖和纤维二糖。对温度,pH值,酶解时间,酶用量分别进行单因素实验,通过测定葡萄糖含量和总还原糖含量,找出酶水解麦草的适宜条件为:pH4.6,温度47℃,酶解时间48h,酶用量7.5IU(每克绝干原料)。对不同底物浓度的实验表明,在尽可能高的底物浓度下连续水解,产物浓度高,得率也高。     

秸秆高产燃料乙醇新工艺的研究

主要利用农村大量的农业废弃物——秸秆等为原料,将秸秆进行无污染蒸汽爆破预处理后,纤维素和木质素混合物中,将其中的一小部分混合物作为菌种的发酵底物,通过压力脉动固态发酵得到纤维素酶,并加入到另一部分混合物中,通过纤维素固相酶解与乙醇发酵耦合工艺处理后,即生成燃料乙醇和发酵渣。     

木质纤维生物质同步糖化发酵(SSF)生产乙醇的研究进展

综述了有关木质纤维生物质原料同步糖化发酵生产乙醇的最新研究进展和未来发展方向:同步糖化发酵是一种用于从木质纤维原料生产乙醇的工艺过程,此工艺的优点是酶水解与发酵同时进行,可以减少最终产物对酶水解的抑制作用,并减少投资成本,是最具发展潜力和优势的工艺之一。近年来在优化预处理工艺、降低纤维素酶成本以及己糖戊糖协同发酵等方面的研究都取得了长足的进步,其中以小麦秸秆为原料进行同步糖化发酵所得到的乙醇浓度接近40g/L。     

木质纤维原料生物转化燃料乙醇的研究进展

木质纤维生物量能够用来生产一种可替代有限的石油产品的能源——乙醇。木质纤维的转化主要分两个步骤木质纤维生物量中纤维素水解生成还原糖;糖发酵成乙醇。基于目前的技术,木质纤维原料生产乙醇的主要问题是得率低、水解成本高。促进木质纤维水解的方法包括木质纤维原料预处理脱除木素和半纤维素;纤维素酶的优化;同步糖化发酵法(SSF)。     

玉米芯的2步法预处理及其酶解条件优化研究

生物燃料将成为主要新能源之一,以玉米芯为原料,碱氧和稀酸为处理剂对其进行2步法预处理,使原料中纤维素相对含量增加,以提供转化乙醇的纤维素原料。采用扫描电镜表征2步法预处理玉米芯,其表面形成疏松、沟纹和孔洞形态,这有利于酶解。采用瑞氏木霉生产的纤维素酶水解该预处理玉米芯,利用正交实验得到酶水解优化条件为,酶用量75 FPU g 1,底物质量浓度60 g L 1,pH值4.8,反应温度50℃,还原糖得率可达69.3%。为提高纤维素酶中β-葡聚糖酶的酶活效率,并减少产物葡萄糖对β-葡聚糖酶的抑制作用,进一步优化β-葡聚糖酶加量。结果表明,当β-葡聚糖酶加量达6.5 CBU时,还原糖得率显著提高到78.2%。这表明该预处理玉米芯是有效降解的玉米芯原料,适于提高还原糖得率。     

木质纤维素类生物质制备燃料乙醇的微生物研究进展

从木质纤维素制备燃料乙醇的基本工艺可以分为预处理、 水解、发酵和纯化4个部分。考虑到微生物方法在工业化生产中具有的低成本优势,本文就微生物在预处理中的应用,微生物在纤维素酶生产中的应用以及微生物在乙醇发酵中的应用这三方面的研究现状进行了综述,并进一步分析了在改进原料预处理、提高纤维素酶产量和活性、扩大糖原范围、优化水解发酵工艺等方面的研究进展。     

Pretreatment of Lignocellulosic Wastes to Improve Ethanol and Biogas Production: A Review

Lignocelluloses are often a major or sometimes the sole components of different waste streams from various industries, forestry, agriculture and municipalities. Hydrolysis of these materials is the first step for either digestion to biogas (methane) or fermentation to ethanol. However, enzymatic hydrolysis of lignocelluloses with no pretreatment is usually not so effective because of high stability of the materials to enzymatic or bacterial attacks. The present work is dedicated to reviewing the methods that have been studied for pretreatment of lignocellulosic wastes for conversion to ethanol or biogas. Effective parameters in pretreatment of lignocelluloses, such as crystallinity, accessible surface area, and protection by lignin and hemicellulose are described first. Then, several pretreatment methods are discussed and their effects on improvement in ethanol and/or biogas production are described. They include milling, irradiation, microwave, steam explosion, ammonia fiber explosion (AFEX), supercritical CO₂ and its explosion, alkaline hydrolysis, liquid hot-water pretreatment, organosolv processes, wet oxidation, ozonolysis, dilute-and concentrated-acid hydrolyses, and biological pretreatments.     

汽爆预处理技术在纤维素乙醇工业化中的应用及实践

纤维素乙醇技术是推动秸秆高值化利用、缓解环境压力的重要途径之一。在整个工艺过程中,原料预处理对于纤维素乙醇技术的发展起着至关重要的作用。其中,蒸汽爆破是目前应用最广、工业化水平最高的预处理技术之一。综述了汽爆技术在纤维素乙醇工业化装置中的应用,按照汽爆方式、汽爆设备类型、工艺流程和添加的化学试剂的不同,对汽爆工艺和设备分别进行了介绍。综合而言,两段式连续汽爆预处理能够有效的降低半纤维素降解产生的抑制物,提高木糖回收率,降低原料成本,是比较有应用前途的技术之一,对设备的耐压能力和稳定性以及系统控制水平要求较高。从化学试剂的使用来看,中性或低酸汽爆是未来工业发展的方向。     

木质素结构以及表面活性剂对木质素吸附纤维素酶的影响

引言随着世界经济的快速发展和人口的增加,石油以及其他不可再生资源已经濒临枯竭。出于经济发展、国家安全以及环境保护等各个方面的需要,各个国家都在寻找石油的代替能源。生物乙醇这一新     

Supercritical hydrolysis of cellulose for oligosaccharide production in combined technology

A combined supercritical/subcritical technology was used as a pre-treatment and hydrolysis method for ethanol production from cellulose/lignocelluloses. In a batch study for supercritical hydrolysis, which is the primary step of the combined technology, 60 mg of microcrystalline cellulose in 2.5 ml deionized water was loaded into each reactor and heated in a salt bath at a selected temperature for a specified reaction time. Cellulose was quickly hydrolyzed to oligosaccharides, hexoses and other small molecular products at temperatures above the critical point of water. Temperature and reaction time were the two key parameters that determined the products of cellulose hydrolysis. The highest yield of oligosaccharides (approximately 40%) was obtained at optimum conditions of 380 °C and a reaction time of 16 s. The corresponding yield of hexoses was 24%, giving a maximum yield of hydrolysis products of approximately 63%. A complete decomposition of hydrolysis products occurred at higher temperatures and/or longer reaction times. A kinetic analysis was performed to explain the reaction of cellulose in supercritical water. The results presented here provide a rigid framework for the use of combined supercritical/subcritical technology in subsequent research.     

Enhanced ethanol production from enzymatically treated steam‐exploded rice straw using extractive fermentation

Alcohol fermentation of an enzymatic hydrolyzate of exploded rice straw was studied experimentally. Rice straw was treated under variable conditions, such as steam pressure and steaming time. The exploded rice straw was separated into water‐soluble material, methanol‐soluble lignin, Klason lignin, and a mixture of cellulose and a low molecular weight substance. The effects of steam explosion on the characteristics of the exploded rice straw were clarified from the point of view of the amounts of extractive components. Steam explosion was found to be effective for the delignification of rice straw and for increasing its susceptibility to enzyme hydrolysis and alcohol fermentation. The polysaccharides (cellulose and hemicellulose) in the rice straw treated at a steam pressure of 3.5 MPa with a steaming time of 2 min were hydrolyzed almost completely into monosaccharides, (ie glucose and xylose) by a mixture of Trichoderma viride cellulase (Meicelase) and Aspergillus aculeatus cellulase (Acucelase). The enzymatic hydrolyzate of exploded rice straw was converted into ethanol efficiently by Pichia stipitis and the ethanol yield from sugar was about 86%(w/w) of the theoretical value. The ethanol concentration in a membrane bioreactor coupled with a pervaporation system reached 50 gdm^?3 and was about five times higher than that in the culture broth. The energy efficiency (ratio of combustion energy of ethanol produced to energy for steam explosion) reached a maximum value at a pressure of 3.5 MPa for 2 min. © 2001 Society of Chemical Industry     

响应面法优化水/醇处理后汽爆玉米秸秆酶解的研究

为了提高水/醇处理后汽爆玉米秸秆的酶解还原糖产率,对其酶解条件进行了优化。通过响应面优化法确定了底物浓度为53.28g/L,纤维素酶用量为53.32FPU/g,酶解时间为60.45h时,还原糖产率可达672.36mg/g,与秸秆物料及汽爆后物料相比,酶解还原糖产率分别提高了179.21%和37.29%。化学组分及结构形貌分析表明：水/醇处理后物料纤维素含量显著增加,X射线衍射(XRD)和扫描电镜(SEM)结果表明经过水/醇处理后物料相对结晶度增高,但结构更有利于纤维素酶分子的吸附。     

响应面法优化水/醇处理后汽爆玉米秸秆酶解

为了提高水/醇处理后汽爆玉米秸秆的酶解还原糖产率,对其酶解条件进行了优化。通过响应面优化法确定了底物质量浓度为53.28 g/L,纤维素酶用量为53.32 FPU/g,酶解时间为60.45 h时,还原糖产率可达672.36mg/g,与秸秆物料及汽爆后物料相比,酶解还原糖产率分别提高了170.46%和28.97%。化学组分及结构形貌分析表明,汽爆水/醇处理后物料纤维素含量显著增加,物料相对结晶度增高,其结构更有利于纤维素酶分子的吸附。