利用UPLC-DAD-HRMS分析低温压榨 鲜青花椒油贮藏期间的色素变化

旨在为低温压榨鲜青花椒油的工业生产、贮藏和质量控制提供借鉴,利用超高效液相色谱-二极管阵列检测器-高分辨质谱（UPLC-DAD-HRMS）技术对低温压榨鲜青花椒油中色素进行测定,并研究贮藏过程中光、氧、温度对低温压榨鲜青花椒油的色素含量和色泽L*、a*、b*的影响。结果表明：从低温压榨鲜青花椒油中鉴定出32种叶绿素和10种类胡萝卜素;叶绿素中主要含有叶绿素a、C132-羟基-叶绿素a、叶绿素b和脱镁叶绿素a;类胡萝卜素中主要含有叶黄素和β-胡萝卜素;叶绿素总量为9.44 mg/kg,类胡萝卜素总量为4.95 mg/kg。贮藏过程中影响低温压榨鲜青花椒油中色素降解最主要的因素是光,其次是温度,氧气几乎没有影响。另外,a*可以作为衡量低温压榨鲜青花椒油色素含量及色泽控制的指标。     

成熟期温度对烟叶质体色素积累及香气成分的影响

为明确成熟期温度对烟叶品质风格的影响机制,以烟草品种K326为材料,采用盆栽试验在烟株打顶后将其分别转移至日均温度28.1℃和22.8℃的人工气候室中控温培养,在培养30 d后对中部叶片细胞结构、色素积累及烟叶香气成分进行分析。叶片超微结构观察结果显示,在烟叶成熟期高温条件下,叶片细胞核降解程度提高,淀粉粒含量(质量分数)丰富,嗜锇颗粒数量多、体积较大,叶绿体降解充分,类囊体片层不完整。LC/MS分析表明,成熟期高温处理的叶片中质体色素,包括β-胡萝卜素、新黄质、紫黄质、叶黄素、叶绿素a、叶绿素b等含量(质量分数)均低于低温处理的叶片。而在烤后烟叶中类胡萝卜素降解产物芳樟醇、异佛尔酮、β-二氢大马酮、二氢猕猴桃内酯、巨豆三烯酮4、法尼基丙酮、螺岩兰草酮等,叶绿素降解产物新植二烯含量显著高于低温处理的叶片。因此,烟叶成熟期高温促进了叶片细胞结构的降解和内含物质的积累,有利于质体色素降解和香气物质的生成,对烟叶品质和风格具有较大影响。     

黄金芽茶鲜叶加工过程中色泽变化及内在原因分析

探究黄金芽茶鲜叶加工过程中的色泽变化及其内在原因,以期为黄金芽及此类白化茶树品种鲜叶的加工生产提供一定理论指导。以常规茶树品种鸠坑作为对照,分析黄金芽鲜叶在受热加工过程中外观色泽和内在呈色物质含量的变化,采用UPLC法分析叶黄素、β-胡萝卜素、叶绿素a、叶绿素b、脱镁叶绿素a及脱镁叶绿素b等6种脂溶性色素含量。研究结果表明,黄金芽鲜叶杀青后外观颜色由黄变绿,色差a*值由正值(红色)变为负值(绿色),以叶黄素为代表的黄色素含量显著降低,导致绿色素与黄色素含量比值显著上升,呈现鲜绿色;而后续的闷黄工序可使茶叶外观色泽恢复黄色,原因在于闷黄可使茶叶中的叶绿素a/b含量显著下降,绿色素与黄色素含量比值显著降低,使得闷黄后的成品茶外观色泽和色素含量均与鲜叶更为接近,黄金芽鲜叶的色泽优势由此得以凸显。     

冰温贮藏过程中蟹味菇几种营养成分变化的动力学特征

为研究冰温贮藏减缓蟹味菇营养成分降解的机理,以采后蟹味菇为试材,基于反应动力学理论研究了25℃、15℃、4℃及-0.5℃4个贮藏条件下蟹味菇抗坏血酸、可溶性糖和可溶性蛋白质等3种营养成分的降解表观动力学及热力学特征。结果表明,蟹味菇抗坏血酸、可溶性糖和可溶性蛋白质的降解均符合一级动力学反应模型,降解活化能分别为81.51 kJ/mol、83.88 kJ/mol、100.52kJ/mol;冰温贮藏条件下3种营养成分的降解半衰期、分子有效碰撞百分比、降解活化焓、降解活化自由能均高于其他温度处理组;降解过渡态平衡常数K≠均小于其他温度处理组。此外,可溶性蛋白质的降解活化熵及位阻因素为4℃贮藏时最大,而抗坏血酸及可溶性糖的降解活化熵和位阻因素则为冰温贮藏时最大。故,冰温贮藏改变了蟹味菇营养成分降解的动力学及热力学特性,从而表现为其减缓了蟹味菇营养成分的降解。     

食用植物油脂精炼过程中色素的定量分析

摘要：以精炼各工段大豆油、玉米油、菜籽油为原料,通过定量检测其中4种天然色素（β-胡萝卜素、叶黄素、玉米黄质及叶绿素）的含量,考察不同种类食用植物油脂的色素组成及在精炼各工段的含量范围,研究精炼过程中各色素的变化趋势。结果表明：原油中色素总量大小排序为菜籽油＞玉米油＞大豆油,3种植物油脂中色素组成也不相同。在中和工段,菜籽油中叶黄素、玉米油中叶绿素衰变较明显,其他色素衰变不明显;各色素在脱色工段衰变较为明显;脱臭工段叶绿素总去除率分别为大豆油85.7%～98.7%、菜籽油97.9%～99.9%、玉米油92.3%～98.9%,而脱臭油中β-胡萝卜素、叶黄素、玉米黄质含量均低于检出限。食用植物油脂精炼过程色素的定量分析,可以为植物油脂适度精炼及精准加工提供可靠的评估方式。     

低温贮藏和短波紫外线辐照对芥蓝采后叶绿素降解及脱镁叶绿素酶活性的影响

采后叶绿素降解造成绿叶蔬菜失绿,直接影响产品的感官品质和货架寿命.以研究芥蓝采后叶绿素降解和脱镁叶绿素酶(PPH)之间的关系为目的,考察了温度以及短波紫外线(uv-C)辐照对贮藏过程中芥蓝叶绿素含量及脱镁叶绿素酶活性变化的影响.结果表明常温22℃贮藏时,PPH活性在前期快速上升,第3d时约为第0d的200％,而在低温4℃时酶活仅为第0d的135％,第3d时叶绿素a的含量是常温时的2.8倍;UV-C辐照降低了PPH活性,第1dPPH酶活仅上升14％,而对照则上升50％,第5d时叶绿素a的含量是对照的1.3倍.因此低温和UV-C辐照抑制了贮藏过程中PPH酶活性的快速上升,从而降低了叶绿素降解的速度.     

贮藏温度对红肉脐橙(Citrus sinensis Osbeck)果实类胡萝卜素含量的影响

研究贮藏温度(20℃和4℃)对红肉脐橙(C.sinensis Osbeck)果实类胡萝卜素含量的影响。结果表明:贮藏温度对红肉脐橙果皮和果肉类胡萝卜素含量的影响存在明显组织特异性。常温(20℃)对红肉脐橙果皮着色的积极作用只维持在贮藏的前5周,随着贮藏时间延长,果皮总类胡萝卜素含量基本保持不变;低温(4℃)能基本保持贮藏初期果皮类胡萝卜素含量,但含量低于常温贮藏。除贮藏10周时β-胡萝卜素、叶黄素、α-隐黄素含量有一个小幅增加外,常温对红肉脐橙果肉类胡萝卜素总体影响不大;低温贮藏的红肉脐橙果肉类胡萝卜素含量于采后1周达到峰值,随后含量基本保持稳定。     

精炼过程中大豆油色素含量的变化及叶绿素的脱除

为了改善成品大豆油外观发绿、发暗的情况，测定了大豆油精炼过程中3种色素（叶黄素、β-胡萝卜素和叶绿素）的含量，并研究了叶绿素的脱除。结果表明：在现有精炼工艺条件下，叶黄素、β-胡萝卜素可以被完全脱除，当大豆原油的叶绿素含量大于2.0 mg/kg时，叶绿素含量很难降到0.20 mg/kg以下；添加0.075%的活性炭对大豆原油进行脱色可使叶绿素含量不超过0.20 mg/kg。综上，通过目前加工手段及调整加工助剂，基本可以脱除大豆油中的色素。     

6-BA、GA_3结合果蜡复合涂膜对槟榔果实失水和色泽的影响及其机理

以海南产新鲜槟榔为研究对象,研究了100 mg/L 6-BA+100 mg/L GA3+50%果蜡复合涂膜对采后槟榔鲜果在(25±0.5)℃和(7±0.5)℃条件下失水和色泽变化的影响及其机理。贮藏至21 d,低温结合涂膜处理的槟榔失重率为2.51%、电导率为15.09%、丙二醛为13.1%,含量均显著低于其他处理组(p0.05);贮藏至21 d,通过电镜观察,低温结合涂膜处理的槟榔组织结构保持平滑状态、没有破损,明显优于其他处理组,而且该组的槟榔果实表皮叶绿素含量最高、胡萝卜素含量最低、叶绿素酶活性最低。结果表明复配涂膜配合低温贮藏能有效抑制丙二醛的生成,维持细胞膜的完整性,降低了叶绿素酶对叶绿素的催化分解以及减缓了胡萝卜素的生成,相比常温贮藏和未涂膜处理可以更有效地降低槟榔果实失水,增加槟榔表皮叶绿素的积累,延缓槟榔果实黄化劣变。     

2,4-表油菜素内酯处理对不同温度贮藏中小白菜品质和生理生化的影响

以'上海青'小白菜为试验材料,采用1.0 mg/L的2,4-表油菜素内酯(2,4-epibrassinolide,EBR)溶液进行采后喷洒处理,分别于2℃和20℃下贮藏,研究EBR处理对贮藏期间小白菜品质和生理生化的影响.结果显示,EBR处理能抑制2℃和20℃贮藏期间小白菜的L*上升和色调角H下降,减缓总叶绿素、叶绿素...     

Reliable identification of grapevine rootstock varieties using RAPD PCR on woody samples

Since grapevine ( Vitis spp .) rootstock material is being traded increasingly as disbudded woody material a lack of distinctive morphological features on such material necessitates an alternative and reliable means of identification. Methods described here were developed for rapid and efficient extraction of DNA from woody samples rich in phenolic compounds and polysaccharides, and for subsequent identification of varieties by RAPD PCR. Using these methods, and with the application of only one selected RAPD primer, we were able to differentiate sixteen rootstock varieties, including the seven varieties most commonly used in Germany. Problems commonly encountered with reproducibility of RAPD patterns were avoided by choosing primers with a dinucleotide sequence and a high G/C content that allowed a rather high annealing temperature of 45°C. Methods described here should also be useful for other horticultural crops, especially those with woody tissues rich in phenolic compounds and polysaccharides.     

An internet compendium of analytical methods and spectroscopic information for monomers and additives used in food packaging plastics

An internet website (http://cpf.jrc.it/smt/) has been produced as a means of dissemination of methods of analysis and supporting spectroscopic information on monomers and additives used for food contact materials (principally packaging). The site which is aimed primarily at assisting food control laboratories in the European Union contains analytical information on monomers, starting substances and additives used in the manufacture of plastics materials. A searchable index is provided giving PM and CAS numbers for each of 255 substances. For each substance a data sheet gives regulatory information, chemical structures, physico-chemical information and background information on the use of the substance in particular plastics, and the food packaging applications. For monomers and starting substances (155 compounds) the infra-red and mass spectra are provided, and for additives (100 compounds); additionally proton NMR are available for about 50% of the entries. Where analytical methods have been developed for determining these substances as residual amounts in plastics or as trace amounts in food simulants these methods are also on the website. All information is provided in portable document file (PDF) format which means that high quality copies can be readily printed, using freely available Adobe Acrobat Reader software. The website will in future be maintained and up-dated by the European Commission's Joint Research Centre (JRC) as new substances are authorized for use by the European Commission (DG-ENTR formerly DGIII). Where analytical laboratories (food control or other) require reference substances these can be obtained free-ofcharge from a reference collection housed at the JRC and maintained in conjunction with this website compendium.     

Aroma characterization of various apricot varieties using headspace–solid phase microextraction combined with gas chromatography–mass spectrometry and gas chromatography–olfactometry

The characterization of the aromatic profile of several apricot cultivars with molecular tracers in order to obtain objective data concerning the aromatic quality of this fruit was undertaken using headspace–solid phase microextraction (HS–SPME). Six apricot cultivars were selected according to their organoleptic characteristics: Iranien, Orangered, Goldrich, Hargrand, Rouge du Roussillon and A4025. The aromatic intensity of these varieties measured by HS–SPME–Olfactometry were defined and classified according to the presence and the intensity of grassy, fruity and apricot like notes. In the six varieties, 23 common volatile compounds were identified by HS–SPME–GC–MS. Finally, 10 compounds, ethyl acetate, hexyl acetate, limonene, β-cyclocitral, γ-decalactone, 6-methyl-5-hepten-2-one, linalool, β-ionone, menthone and (E)-hexen-2-al were recognized by HS–SPME–GC–O as responsible of the aromatic notes involved in apricot aroma and considered as molecular tracers of apricot aromatic quality which could be utilized to discriminate apricot varieties.     

Tests of potential functional barriers for laminated multilayer food packages. Part I: Low molecular weight permeants

The advent of the functional barrier concept in food packaging has brought with it a requirement for fast tests of permeation through potential barrier materials. In such tests it would be convenient for both foodstuffs and materials below the functional barrier (sub-barrier materials) to be represented by standard simulants. By means of inverse gas chromatography, liquid paraffin spiked with appropriate permeants was considered as a potential simulant of sub-barrier materials based on polypropylene (PP) or similar polyolefins. Experiments were performed to characterize the kinetics of the permeation of low molecular weight model permeants (octene, toluene and isopropanol) from liquid paraffin, through a surrogate potential functional barrier (25 μm-thick oriented PP) into the food simulants olive oil and 3% (w/v) acetic acid. These permeation results were interpreted in terms of three permeation kinetic models regarding the solubility of a particular model permeant in the post-barrier medium (i.e. the food simulant). The results obtained justify the development and evaluation of liquid sub-barrier simulants that would allow flexible yet rigorous testing of new laminated multilayer packaging materials.     

Analysis of benzo[a]pyrene in spiked fatty foods by second derivative synchronous spectrofluorimetry after microwave-assisted treatment of samples

A simple, rapid and inexpensive method has been developed for the determination of benzo[a     

The development of reference materials for paralytic shellfish poisoning toxins in lyophilized mussel. II: Certification study

This paper describes the second part of a project undertaken to develop certified mussel reference materials for paralytic shellfish poisoning toxins. In the first part two interlaboratory studies were undertaken to investigate the performance of the analytical methodology for several PSP toxins, in particular saxitoxin and decarbamoyl-saxitoxin in lyophilized mussels, and to set criteria for the acceptance of results to be applied during the certification exercise. Fifteen laboratories participated in this certification study and were asked to measure saxitoxin and decarbamoyl-saxitoxin in rehydrated lyophilized mussel material and in a saxitoxin-enriched mussel material. The participants were allowed to use a method of their choice but with an extraction procedure to be strictly followed. The study included extra experiments to verify the detection limits for both saxitoxin and decarbamoyl-saxitoxin. Most participants (13 of 15) were able to meet all the criteria set for the certification study. Results for saxitoxin.2HCl yielded a certified mass fraction of <0.07 mg/kg in the rehydrated lyophilized mussels. Results obtained for decarbamoyl-saxitoxin.2HCl yielded a certified mass fraction of 1.59+/-0.20 mg/kg. The results for saxitoxin.2HCl in enriched blank mussel yielded a certified mass fraction of 0.48 +/- 0.06 mg/kg. These certified reference materials for paralytic shellfish poisoning toxins in lyophilized mussel material are the first available for laboratories to test their method for accuracy and performance.     

Announcing a new international peer-reviewed journal:Food Science and Human Wellness now accepting manuscript submission in English

<正>We are pleased to announce the launch of a new international peer-reviewed journal-Food Science and Human Wellness,ISSN 2213-4530,which is an open access journal,produced and hosted by Elsevier B.V.on behalf of Beijing Academy of Food Sciences.Food Science and Human Wellness is an international peer-reviewed English journal that provides a forum for the dissemination of the     

Chinese CTP Market

According to Printing and Printing Equipment Industries Association of China（PEIAC）＇s statistics to the plate manufucturer in China, in 2013, the actual offset plate production has reached 346 million square meters in China. Among them, the CTP production volume was 245 million square meters, up by 11% than that of last year; the total sales of the CTP plate was 239 million square meters, up by 13%.     

Preparatory Work of Print China 2015 is Going Smoothly

正Held at Guangdong Modern International Exhibition Center,Print China 2015 will cover 7exhibition halls,besides the original Hall No.3,4,5,6,7,the newly built F zone of Hall 3 will be used too.The total area will be140,000 square meters.Hall 3:Offset and large printing equipment,package printing equipment,post press