一种紧凑型超宽带双陷波天线设计与研究

超宽带(UWB)系统的工作频段与现有的许多窄带系统频段相互重叠,因此各个系统信号之间存在潜在的干扰。针对上述问题提出了一种紧凑型超宽带双陷波天线。天线由一个圆形辐射贴片构成并通过50W的微带线进行馈电。接地板和传统的接地板相比被截短了,以提高天线的阻抗带宽。通过在辐射贴片上刻蚀H 型槽来实现天线的双陷波功能,并在微带馈线中引入了嵌入式谐振回路(ERC)结构,加大了天线的陷波深度和阻带宽度,陷波性能好于同频段的双陷波天线。仿真和测试结果表明,天线在3.1～4.2 GHz 以及5.0～6.6GHz 具有陷波特性,有效地避免了WiMAX 和WLAN 频段信号的干扰。同时在2.8 ~10.7 GHz 的其它频段上具有良好的阻抗匹配和较好辐射方向特性。天线的尺寸为34mm*26mm*1.6 mm,结构较为紧凑。     

具有双陷波特性的超宽带天线设计与研究

提出一种具有双陷波特性的燕尾形平面超宽带天线.天线的辐射体和地板分别采用椭圆和梯形的渐变结构,具有良好的宽带阻抗匹配特性.通过在辐射体上嵌入两种不同类型的缝隙,使天线具有双陷波功能.计算和实测结果表明,天线在通带(2～3.2GHz、4.3～5.3GHz和6.2～14GHz)频段范围内满足电压驻波比小于2,在3.2～4.3GHz和5.3～6.2GHz两个频段内同时具有陷波特性,并且,天线在通带频段内呈现良好的辐射特性.文末结合天线的实测阻抗曲线给出了一个概念性电路,定性地解释了陷波特性的工作原理.     

基于开窗结构和寄生单元的双陷波超宽带天线

设计了一种具有双陷波特性的平面超宽带天线。超宽带基础天线的馈电采用渐变式阶梯阻抗匹配结构作,使得天线具有了宽阻抗匹配能力。通过在椭形辐射器内进行开窗,以及在地面添加矩形寄生单元,实现了天线的双陷波特性。测试结果表明,该天线的工作带宽(VSWR<2）为3.1~10 GHz,工作在超宽带(UWB)频率范围,两个陷波分别在3.3~4.0 GHz和5.0~5.85 GHz,可以应用于WiMAX和WLAN频段的信号抑制。仿真与实测结果表明,该天线结构简单、实现了良好的陷波功能,能够较好地应用于超宽带通信系统中。     

一种共面波导馈电的双陷波渐变槽天线

为了滤除WIMAX(3.3～3.8 GHz)和WLAN(5.125～5.825 GHz)窄带信号对超宽带系统的干扰,该文提出一款共面波导馈电的小型化双陷波渐变槽天线。共面波导结构可以有效地扩展天线的带宽,实现对整个UWB(3.1～10.6 GHz)频段的全覆盖。通过在天线的馈线上开L型缝隙和在辐射贴片上开一对E字型缝隙的方法,有效实现了在3.15～3.97 GHz和4.94～6.05 GHz频段的双陷波特性,能够抑制WIMAX和WLAN对超宽带系统的干扰。该天线结构简单紧凑,尺寸非常小,仅为40 mm×18 mm×0.813 mm。仿真和实测结果表明该天线在超宽带波段内具有良好的陷波特性、增益特性,可以应用于小型化超宽带系统中。文中方法对于陷波渐变槽天线的研究具有一定的借鉴意义。     

一种共面波导馈电的三阻带超宽带天线设计与研究

设计了一种共面波导馈电的超宽带天线(UWB),该天线的辐射体和地板分别由具有渐变结构的类圆辐射贴片和梯形组成,具有良好的宽带阻抗匹配特性。通过在贴片的不同位置上嵌入3种不同形状的缝隙,实现了天线的3陷波特性。并利用HFSS 12软件对所设计的天线进行仿真测试,仿真计算和实测结果表明,该天线在WiMax(3.3～3.7G)、Wlan(5.15～5.825GHz)以及ITU(8.025～8.4GHz)3个频段内具有良好的陷波特性,并且该天线在其它通带频段具有良好的辐射特性和稳定的增益。天线的尺寸仅有25mm×29mm×1mm,利于与微波器件的集成。     

一种双陷波超宽带单极子天线的设计

提出了一种新型双陷波特性的超宽带单极子天线。通过在介质基板上添加锥形辐射贴片,天线可以覆盖超宽带通信频段。在辐射贴片上引入上、下两个锥形缝隙结构,可以实现3.5 GHz、5.5 GHz的双陷波特性。天线实测模型电压驻波比＜2的阻抗带宽是2.56~10.61 GHz,其中3.18~3.76 GHz和4.4~5.75 GHz具有陷波特性。测试表明,天线在工作频带内具有全向辐射特性。     

一种新型具有双陷波特性的超宽带天线设计

本文提出了一种新型紧凑的具有双陷波特性的印刷超宽带天线。天线采用微带传输线馈电,并通过圆形与矩形 的混合结构辐射单元和带有矩形开槽结构的地板来实现天线的超宽带特性,工作带宽覆盖UWB 频率范围。通过地板上 两个对称的J 形开槽和微带馈线两侧对称添加的线型结构单元来实现双陷波特性,两个陷波频段刚好覆盖了3.5GHz 的 WIMAX 频段标准和5.2/5.8GHz 的WLAN 频段标准。同时,该天线在工作频带范围内具有良好的辐射特性,符合超宽带 通信的使用标准。     

一种新型双陷波超宽带天线设计

设计了一种新型双陷波超宽带印刷天线。辐射贴片底部为梯形结构,实现了良好的阻抗匹配。通过在贴片上加载两个U型缝隙,分别在中心频率3.5GHz和5.5GHz处产生陷波。比较陷波前后天线表面电流密度,并用传输线理论对陷波产生机理进行了分析。天线实测与仿真结果吻合,通带内天线辐射效果良好,陷波频段内增益下降超过5dB,达到了陷波抑制的效果。     

具有双陷波特性的超宽带平面天线设计

设计了一种带有2个陷波频段的超宽带天线。天线的缝隙和馈电枝节采用相反的梯形结构,以实现较好的阻抗匹配。通过在宽缝隙中增加2个线形枝节和1个"E"形结构,使得天线在3.0 GHz~3.9 GHz和5 GHz~6 GHz 2个频段内出现频率阻断。根据天线的阻抗曲线,给出等效谐振电路并对陷波产生的原理进行了分析。最后对天线的远场辐射特性进行分析和阐述,测试结果良好,达到了陷波超宽带天线频率阻断的效果。     

一种新型的具有陷波功能的超宽带天线仿真与设计

提出了一种新型的具有陷波功能的共面波导(CPW)馈电的超宽带(UWB)天线,基于有限元电磁仿真软件HFSS对天线结构参数进行大量仿真优化,最终天线阻抗带宽为2.SGHz～ 12.0GHz,在3.3GHz～3.8GHz频段范围内实现了陷波阻带,在带通频段范围内实现了良好的辐射特性,并且具有较稳定的增益,为2.7dBi～5.8dBi.     

Resolution Enhancement Technology:Integrated Process Solutions using OPC

DUV lithography, using the 248 nm wavelength, is a viable manufacturing option for devices with features at 130 nm and less. Given the low kl value of the lithography, integrated process development is a necessary method for achieving acceptable process latitude. The application of assist features for rule based OPC requires the simultaneous optimization of the mask, illumination optics and the resist.Described in this paper are the details involved in optimizing each of these aspects for line and space imaging.A reference pitch is first chosen to determine how the optics will be set. The ideal sigma setting is determined by a simple geometrically derived expression. The inner and outer machine settings are determined, in turn,with the simulation of a figure of merit. The maximum value of the response surface of this FOM occurs at the optimal sigma settings. Experimental confirmation of this is shown in the paper.Assist features are used to modify the aerial image of the more isolated images on the mask. The effect that the diffraction of the scattering bars (SBs) has on the image intensity distribution is explained. Rules for determining the size and placement of SBs are also given.Resist is optimized for use with off-axis illumination and assist features. A general explanation of the material' s effect is discussed along with the affect on the through-pitch bias. The paper culminates with the showing of the lithographic results from the fully optimized system.     

Cost-effective test solutions for smart card and other integrated flash applications

From its emergence in the late 1980s as a lower cost alternative to early EEPROM technologies, flash memory has evolved to higher densities and speedsand rapidly growing acceptance in mobile applications.In the process, flash memory devices have placed increased test requirements on manufacturers. Today, as flash device test grows in importance in China, manufacturers face growing pressure for reduced cost-oftest, increased throughput and greater return on investment for test equipment. At the same time, the move to integrated flash packages for contactless smart card applications adds a significant further challenge to manufacturers seeking rapid, low-cost test.     

An improved parallel thinning algorithm with two subiterations

The parallel thinning algorithm with two subiterations is improved in this paper. By analyzing the notions of connected components and passes, a conclusion is drawn that the number of passes and the number of eight-connected components are equal. Then the expression of the number of eight-connected components is obtained which replaces the old one in the algorithm. And a reserving condition is proposed by experiments, which alleviates the excess deletion where a diagonal line and a beeline intersect. The experimental results demonstrate that the thinned curve is almost located in the middle of the original curve connectivelv with single pixel width and the processing speed is high.     

Theoretical analysis of the relationship between the Brillouin gain coefficient and the strain in the optical-fiber sensors

The relation between the power of the Brillouin signal and the strain is one of the bases of the distributed fiber sensors of temperature and strain. The coefficient of the Bfillouin gain can be changed by the temperature and the strain that will affect the power of the Brillouin scattering. The relation between the change of the Brillouin gain coefficient and the strain is thought to be linear by many researchers. However, it is not always linear based on the theoretical analysis and numerical simulation. Therefore, errors will be caused if the relation between the change of the Brillouin gain coefficient and the strain is regarded as to be linear approximately for measuring the temperature and the strain. For this reason, the influence of the parameters on the Brillouin gain coefficient is proposed through theoretical analysis and numerical simulation.     

Novel fiber-optical interferometer with miniaturized probe for in-hole measurements

Today, micro-system technology and the development of new MEMS （Micro-Electro-Mechanical Systems） are emerging rapidly. In order for this development to become a success in the long run, measurement systems have to ensure product quality. Most often, MEMS have to be tested by means of functionality or destructive tests. One reason for this is that there are no suitable systems or sensing probes available which can be used for the measurement of quasi inaccessible features like small holes or cavities. We present a measurement system that could be used for these kinds of measurements. The system combines a fiber optical, miniaturized sensing probe with low-coherence interferometry, so that absolute distance measurements with nanometer accuracy are possible.     

Study of waveguide coupling efficiency in hybrid silicon lasers

This paper presents a new method to increase the waveguide coupling efficiency in hybrid silicon lasers. We find that the propagation constant of the InGaAsP emitting layer can be equal to that of the Si resonant layer through improving the design size of the InP waveguide. The coupling power achieves 42% of the total power in the hybrid lasers when the thickness of the bonding layer is 100 nm. Our result is very close to 50% of the total power reported by Intel when the thickness of the thin bonding layer is less than 5 nm. Therefore, our invariable coupling power technique is simpler than Intel＇s.     

A rigorous proof of MIMO channel capacity’s increase with antenna number

It is well known that adding more antennas at the transmitter or at the receiver may offer larger channel capacity in the multiple-input multiple-output（MIMO） communication systems. In this letter, a simple proof is presented for the fact that the channel capacity increases with an increase in the number of receiving antennas. The proof is based on the famous capacity formula of Foschini and Gans with matrix theory.     

Teleportation of an arbitrary unknown N-qubit entangled state under the controlling of M controllers

A new quantum protocol to teleport an arbitrary unknown N-qubit entangled state from a sender to a fixed receiver under M controllers(M < N) is proposed. The quantum resources required are M non-maximally entangled Greenberger-Home-Zeilinger (GHZ) state and N-M non-maximally entangled Einstein-Podolsky-Rosen (EPR) pairs. The sender performs N generalized Bell-state measurements on the 2N particles. Controllers take M single-particle measurement along x-axis, and the receiver needs to introduce one auxiliary two-level particle to extract quantum information probabilistically with the fidelity unit if controllers cooperate with it.     

Diode-end-pumped Nd:YVO4/LBO lasers with 4.2W continuous-wave output at 457 nm

A continuous-wave (CW) 457 nm blue laser operating at the power of 4.2 W is demonstrated by using a fiber coupled laser diode module pumped Nd: YVO4 and using LBO as the intra-cavity SHG crystal With the optimization of laser cavity and crystal parameters, the laser operates at a very high efficiency. When the pumping power is about 31 W, the output at 457nm reaches 4.2 W, and the optical to optical conversion efficiency is about 13.5% accordingly. The stability of the out putpower is better than 1.2% for 8 h continuously working.     

Call for Papers

正Wireless Body-area Networks The last decade has witnessed the convergence of three giant worlds:electronics,computer science and telecommunications.The next decade should follow this convergence in most of our activities with the generalization of sensor networks.In particular with the progress in medicine,people live longer and the aging of population will push the development of wireless personal networks