Polyester and multiwalled carbon nanotube composites: characterization,electrical conductivity and antibacterial activity

Poly(butylene terephthalate) (PBT) composites containing multiwalled carbon nanotubes (MWCNTs) were prepared using a melt‐blending process and used to examine the effects on the composite structure and properties of replacing PBT with acrylic acid‐grafted PBT (PBT‐g‐AA). PBT‐g‐AA and multihydroxyl‐functionalized MWCNTs (MWCNTs‐OH) were used to improve the compatibility and dispersibility of the MWCNTs within the PBT matrix. The composites were characterized morphologically using transmission electron microscopy, and chemically using Fourier transform infrared, solid‐state ¹³C NMR and UV‐visible absorption spectroscopy. The antibacterial and electrical conductivity properties of the composites were also evaluated. MWCNTs or MWCNTs‐OH enhanced the antibacterial activity and electrical conductivity of the PBT/MWCNT or PBT‐g‐AA/MWCNTs‐OH composites. The functionalized PBT‐g‐AA/MWCNTs‐OH composites showed markedly enhanced antibacterial properties and electrical conductivity due to the formation of ester bonds from the condensation of the carboxylic acid groups of PBT‐g‐AA with the hydroxyl groups of MWCNTs‐OH. The optimal proportion of MWCNTs‐OH in the composites was 1 wt%; in excess of this amount, the compatibility between the organic and inorganic phases was compromised. Copyright © 2011 Society of Chemical Industry     

PBTA/TPS共混物的结构、性能和断裂行为

将热塑性淀粉(TPS)与聚(对苯二甲酸丁二醇酯-己二酸丁二醇酯)(PBAT)挤出共混并注塑成型,制备了可完全生物降解的TPS/PBAT复合材料制品。采用扫描电子显微镜研究了注塑复合材料的层次结构与微观形态,测试了不同组分复合材料的性能和应力应变行为。结果表明：TPS在PBAT中呈皮芯结构分布,随含量增加逐渐由芯层向皮层分布。当含量为45%时,芯层到皮层形成均匀的以纤维为主的分散相形态,提高了复合材料的力学性能。加入TPS后会改变复合材料的形变行为,由类似半结晶聚合物的应力应变行为转变为屈服-冷拉行为。     

Melt characteristics,mechanical, and thermal properties of blown film from modified blends of poly(butylene adipate‐co‐terephthalate) and poly(lactide)

Blown films from poly(butylene adipate‐co‐terephthalate) and poly(lactide) (PLA) blends were investigated. The blends were prepared in a twin‐screw extruder, in the presence of small amounts of dicumyl peroxide (DCP). The influence of DCP concentration on film blowing, rheological, mechanical, and thermal properties of the blends is reported in this article. Rheological results showed a marked increase in polymer melt strength and elasticity with the addition of DCP. As a consequence, the film homogeneity and the stability of the bubble were improved. The modified blend films, compared with the unmodified blend, showed an improvement in tensile strength and modulus with a slight loss in elongation. Fourier transform infrared and gel results revealed that chain scission and branching were more significant than crosslinking when the DCP loadings in the blends were not higher than 0.7%. A reduction in melt temperatures of PLA was observed due to difficulty in chain crystallization. The concentrations of DCP strongly affected the melting temperatures but had an insignificant effect on the decomposition behavior of the blends. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Compatible and crystallization properties of poly(lactic acid)/poly(butylene adipate‐co‐terephthalate) blends

Differential scanning calorimetry (DSC), wide angle X‐ray diffraction (WAXD) and dynamic mechanical analysis (DMA) properties of poly(lactic acid)/ poly(butylene adipate‐co‐terephthalate) (PLA/PBAT) specimens suggest that only small amounts of poor PLA and/or PBAT crystals are present in their corresponding melt crystallized specimens. In fact, the percentage crystallinity, peak melting temperature and onset re‐crystallization temperature values of PLA/PBAT specimens reduce gradually as their PBAT contents increase. However, the glass transition temperatures of PLA molecules found by DSC and DMA analysis reduce to the minimum value as the PBAT contents of PLA_xPBAT_y specimens reach 2.5 wt %. Further morphological and DMA analysis of PLA/PBAT specimens reveal that PBAT molecules are miscible with PLA molecules at PBAT contents equal to or less than 2.5 wt %, since no distinguished phase‐separated PBAT droplets and tan δ transitions were found on fracture surfaces and tan δ curves of PLA/PBAT specimens, respectively. In contrast to PLA, the PBAT specimen exhibits highly deformable properties. After blending proper amounts of PBAT in PLA, the inherent brittle deformation behavior of PLA was successfully improved. Possible reasons accounting for these interesting crystallization, compatible and tensile properties of PLA/PBAT specimens are proposed. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Effect of γ‐radiation on the thermal and mechanical properties of a commercial poly(butylene adipate‐co‐terephthalate)

BACKGROUND: Poly(butylene adipate‐co‐terephthalate) (PBAT) has attracted wide interest as a biodegradable polymer. However, its use is restricted in certain applications due to its low melting point. RESULTS: PBAT was treated using γ‐radiation. The radiation features were analyzed using Soxhlet extraction, and the ratio of chain scission and crosslinking and gelation dose were determined using the classical Charlesby–Pinner equation. The results showed that PBAT is a radiation‐crosslinkable polymer. The degree of crosslinking increased with increasing radiation dose; the relation between sol fraction and dose followed the Charlesby–Pinner equation. Differential scanning calorimetry analyses showed that the melting temperature (T_m) and the heat of fusion (ΔH_m) of PBAT exhibited almost no change in the first scan. The second scan, however, showed a decrease in T_m and ΔH_m. The glass transition temperature of irradiated PBAT increased with increasing radiation dose. The weight loss of control and irradiated PBAT resulting from thermal degradation was a one‐step process. Moreover, the tensile strength and elongation at break decreased with an increase in radiation dose. However, the Young's modulus and stress at yield were not greatly affected by γ‐radiation. CONCLUSION: PBAT can be crosslinked using γ‐radiation. The crosslinking efficiency is relatively low. The thermal and mechanical properties of PBAT are affected by γ‐radiation. Copyright © 2009 Society of Chemical Industry     

Crystallization kinetics of poly(1,4‐butylene‐co‐ethylene terephthalate)

The crystallization kinetics of poly(butylene terephthalate) (PBT), poly(ethylene terephthalate) (PET), and their copolymers poly(1,4‐butylene‐co‐ethylene terephthalate) (PBET) containing 70/30, 65/35 and 60/40 molar ratios of 1,4‐butanediol/ethylene glycol were investigated using differential scanning calorimetry (DSC) at crystallization temperatures (T_c) which were 35–90 °C below equilibrium melting temperature . Although these copolymers contain both monomers in high proportion, DSC data revealed for copolymer crystallization behaviour. The reason for such copolymers being able to crystallize could be due to the similar chemical structures of 1,4‐butanediol and ethylene glycol. DSC results for isothermal crystallization revealed that random copolymers had a lower degree of crystallinity and lower crystallite growth rate than those of homopolymers. DSC heating scans, after completion of isothermal crystallization, showed triple melting endotherms for all these polyesters, similar to those of other polymers as reported in the literature. The crystallization isotherms followed the Avrami equation with an exponent n of 2–2.5 for PET and 2.5–3.0 for PBT and PBETs. Analyses of the Lauritzen–Hoffman equation for DSC isothermal crystallization data revealed that PBT and PET had higher growth rate constant G_o, and nucleation constant K_g than those of PBET copolymers. © 2001 Society of Chemical Industry     

Electrical,thermal, and viscoelastic properties of graphene nanoplatelet/poly(butylene adipate‐co‐terephthalate) biodegradable nanocomposites

Graphene nanoplatelets (GNPs) were dispersed in poly(butylene adipate‐co‐terephthalate) (PBAT) by melt‐blending. Scanning electron micrographs showed good dispersion of GNPs in PBAT at low concentrations while at higher loadings, the platelets became physically in contact forming conductive pathways. Electrical conductivity of PBAT was enhanced markedly with GNP addition with a distinctly faster rate for GNP loadings higher than 6 wt % because of formation of conductive networks. Interestingly, thermal stability of PBAT was also found to increase for GNP loadings above 6 wt %. Dynamic viscoelastic properties of the nanocomposites exhibited significant enhancement with increasing GNPs. In particular, storage modulus showed less frequency dependency in the low frequency region leading to a percolation threshold of between 6 and 9 wt %, above which time–temperature superposition principle failed. Steady shear measurements revealed that GNP incorporation increased the zero‐shear viscosity markedly and intensified the shear thinning behavior. Carreau model well described the shear viscosity of all the compositions. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43620.     

Influence of phthalic anhydride and bioxazoline on the mechanical and morphological properties of biodegradable poly(lactic acid)/poly[(butylene adipate)‐co‐terephthalate] blends

Poly(lactic acid) (PLA)/poly[(butylene adipate)‐co‐terephthalate] (PBAT) blends were fabricated by melt blending, with 2,2′‐(1,3‐phenylene)bis(2‐oxazoline) (BOZ) and phthalic anhydride (PA) used as compatibilizers. It was found that a small amount of BOZ or PA greatly increased the elongation at break of the PLA/PBAT blends without sacrificing their high tensile strength. Scanning electron microscopy results revealed that the PBAT particles became finer and were uniformly dispersed in the matrix when the compatibilizers were incorporated, which indicated that the interfacial bonding and compatibilization between PLA and PBAT were improved in the presence of the compatibilizers. Compared with PLA/PBAT blends, the molecular weight of PLA/PBAT/PA/BOZ blends was increased due to chain‐extending reactions. Differential scanning calorimetry results suggested PBAT decreased the crystallization rate and crystallinity of PLA in the blends. Moreover, the glass transition temperature of PBAT was further decreased when the compatibilizers were used. © 2013 Society of Chemical Industry     

Facile fabrication of highly flexible poly(lactic acid) film using alternate multilayers of poly[(butylene adipate)‐co‐terephthalate]

Poly(lactic acid) (PLA) and poly[(butylene adipate)‐co‐terephthalate] (PBAT) are both commonly used biodegradable polymers. In this study, co‐extrusion of PLA and PBAT was used to create alternately multilayered films in order to obtain high‐flexibility PLA film. The incorporation of PBAT provides enhanced flexibility to PLA and the effect is more distinct in the PLA/PBAT multilayer film as the number of layers increases. Through differential scanning calorimetric and wide‐angle X‐ray scattering analyses, the crystallinity of PLA is shown to decrease more in the multilayer film than in the blended film. Transparency is also enhanced in the multilayer film. The fabrication of alternate multilayered film by co‐extrusion of PLA and PBAT shows a new method of preparing a flexible, transparent and fully biodegradable film, which is impossible through a blending process. © 2014 Society of Chemical Industry     

Novel High‐Performance Talc/Poly[(butylene adipate)‐co‐terephthalate] Hybrid Materials

New talc/PBAT hybrid materials were prepared through reactive extrusion. First, PBAT was free‐radically grafted with MA to improve the interfacial adhesion between PBAT and talc. Then, the resulting MA‐g‐PBAT was reactively melt‐blended with talc through esterification reactions of MA moieties with the silanol functions from talc. Sn(Oct)₂ and DMAP were used as catalysts. Interestingly, the tensile properties for these compatibilized composites were improved due to a better interfacial adhesion between both partners. XPS showed the formation of covalent ester bonds between the silanol functions from talc particles, and the MA moieties grafted onto the polyester backbones.

     

Formulation and characterization of compatibilized poly(lactic acid)‐based blends and their nanocomposites with silver‐loaded kaolinite

Biodegradable polymer nanocomposites have been developed in this study as materials for use in the packaging of moisture‐sensitive products. Poly(lactic acid) (PLA) was the main component of the nanocomposites with poly(butylene adipate‐co‐terephthalate) (PBAT) as flexibility enhancer. Tetrabutyl titanate was also added as a compatibilizer to enhance the interfacial affinity between PLA and PBAT by inducing the formation of some PLA/PBAT via transesterification during the melt blending process, thereby improving the mechanical properties of the blends. Silver‐loaded kaolinite synthesized via chemical reduction was also incorporated into the compatibilized blends for further property improvement. Herein, we report a novel biodegradable quaternary nanocomposite system with intercalated‐exfoliated clay dispersion that was uniquely achieved by increasing the interlamellar space between kaolinite layers through silver nanoparticle insertion. The resultant nanocomposites containing as little as 4 phr modified clay reduced the elongation at break from 213.0 ± 5.85% to 53.8 ± 1.81%, enhanced thermal stability (initial decomposition temperature increased from 378 °C to 399 °C) and exhibited a water vapor permeability reduction of 41.85%. On the basis of these properties, the developed nanocomposites are considered to be promising candidates for use in bio‐packaging applications to replace non‐biodegradable and petro‐based plastics. © 2014 Society of Chemical Industry     

High performance materials based on a self‐assembled multiple‐percolated ternary blend

In this study, it will be shown that morphologically tailored tricontinuous ternary blends, comprising polybutylene succinate (PBS), polylactic acid (PLA), and poly (butylene adipate‐co‐terephthalate)(PBAT), can generate new materials with excellent properties. Detailed morphological analysis is used to establish that all three phases in the ternary 33%PBS/33%PLA/33%PBAT blend morphology are highly continuous with a phase structure dominated by complete wetting dynamics. PBS is shown to situate itself between PLA and PBAT. This melt processed, self‐assembled, multiple percolated, blend possesses a high elongation at break (567%), high Young's modulus (1130 MPa), high impact strength (271 J/m), and a storage modulus about 50% higher than pure PBS at room temperature. None of the neat materials demonstrate this combination of high properties and the synergy derives from the tricontinuous structure of the system. The ternary nature of the blend allows for a modulation of the crystallinity behavior as examined by differential scanning calorimeter and X‐ray Diffraction. © 2014 American Institute of Chemical Engineers AIChE J, 60: 3005–3012, 2014     

Poly(propylene)/poly(ethylene terephthalate‐co‐isophthalate) blends and glass bead filled composites: Microstructure and thermomechanical properties

Blends of poly(propylene) (PP) and poly(ethylene terephthalate‐co‐isophthalate) (co‐PET) (95/5) with and without compatibilizing agent (maleic anhydride PP), as well as composites of these blends with glass beads (50 wt%) with and without silane coupling agent surface‐treatment, were prepared and studied on a basis of the material microstructure and thermomechanical properties. Infrared and Raman spectroscopy, as well as transmission electron microscopy, displayed evidence of MAPP compatibilizing action for the blend. Differential scanning calorimetry showed a remarkable effect of nucleation rate increase exerted by co‐PET on the PP crystallization. Moreover, glass beads were found to increase the PP nucleation rate slightly. PP crystallinity hardly varied with the composition. Wide angle X‐ray diffraction allowed determination of differences in the orientation of the poly(propylene) b‐axis, with more homogeneous orientations in the presence of both co‐PET and glass beads. MAPP promoted the PP b‐axis orientation. Differences in PP α′ relaxation could be analyzed through dynamic‐mechanical thermal analysis (DMTA). © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 94: 1841–1852, 2004     

Rheological behavior of polyester blend and mechanical properties of the polypropylene–polyester blend fibers

The article deals with method of preparation, rheological properties, phase structure, and morphology of binary blend of poly(ethylene terephthalate) (PET)/poly(butylene terephthalate) (PBT) and ternary blends of polypropylene (PP)/(PET/PBT). The ternary blend of PET/PBT (PES) containing 30 wt % of PP is used as a final polymer additive (FPA) for blending with PP and subsequent spinning. In addition commercial montane (polyester) wax Licowax E (LiE) was used as a compatibilizer for spinning process enhancement. The PP/PES blend fibers containing 8 wt % of polyester as dispersed phase were prepared in a two‐step procedure: preparation of FPA using laboratory twin‐screw extruder and spinning of the PP/PES blend fibers after blending PP and FPA, using a laboratory spinning equipment. DSC analysis was used for investigation of the phase structure of the PES components and selected blends. Finally, the mechanical properties of the blend fibers were analyzed. It has been found that viscosity of the PET/PBT blends is strongly influenced by the presence of the major component. In addition, the major component suppresses crystallinity of the minor component phase up to a concentration of 30 wt %. PBT as major component in dispersed PES phase increases viscosity of the PET/PBT blend melts and increases the tensile strength of the PP/PES blend fibers. The impact of the compatibilizer on the uniformity of phase dispersion of PP/PES blend fibers was demonstrated. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 4222–4227, 2006     

Synthesis and characterization of polyaniline derivative and silver nanoparticle composites

BACKGROUND: There has been a recent surge of interest in the synthesis and applications of electroactive polymers with incorporated metal nanoparticles. These hybrid systems are expected to display synergistic properties between the conjugated polymers and the metal nanoparticles, making them potential candidates for applications in sensors and electronic devices. RESULTS: Composites of polyaniline derivatives—polyaniline, poly(2,5‐dimethoxyaniline) and poly(aniline‐2,5‐dimethoxyaniline)—and silver nanoparticles were prepared through simultaneous polymerization of aniline derivative and reduction of AgNO₃ in the presence of poly(styrene sulfonic acid) (PSS). We used AgNO₃ as one of the initial components (1) to form the silver nanoparticles and (2) as an oxidizing agent for initiation of the polymerization reaction. UV‐visible spectra of the synthesized nanocomposites reveal the synchronized formation of silver nanoparticles and polymer matrix. The morphology of the silver nanoparticles and degree of their dispersion in the nanocomposites were characterized by transmission electron microscopy. Thermogravimetric analysis and differential scanning calorimetry results indicate an enhancement of the thermal stability of the nanocomposites compared to the pure polymers. The electrical conductivity of the nanocomposites is in the range 10^?4 to 10^?2 S cm^?1. CONCLUSION: A single‐step process for the synthesis of silver nanoparticle–polyaniline derivative nanocomposites doped with PSS has been demonstrated. The approach in which silver nanoparticles are formed simultaneously during the polymerization process results in a good dispersion of the nanoparticles in the conductive polymer matrix. Copyright © 2008 Society of Chemical Industry     

Influence of the degree of grafting on the morphology and mechanical properties of blends of poly(butylene terephthalate) and glycidyl methacrylate grafted poly(ethylene‐co‐propylene) (EPR)

Poly(ethylene‐co‐propylene) (EPR) was functionalized to varying degrees with glycidyl methacrylate (GMA) by melt grafting processes. The EPR‐graft‐GMA elastomers were used to toughen poly(butylene terephthalate) (PBT). Results showed that the grafting degree strongly influenced the morphology and mechanical properties of PBT/EPR‐graft‐GMA blends. Compatibilization reactions between the carboxyl and/or hydroxyl of PBT and epoxy groups of EPR‐graft‐GMA induced smaller dispersed phase sizes and uniform dispersed phase distributions. However, higher degrees of grafting (>1.3) and dispersed phase contents (>10 wt%) led to higher viscosities and severe crosslinking reactions in PBT/EPR‐graft‐GMA blends, resulting in larger dispersed domains of PBT blends. Consistent with the change in morphology, the impact strength of the PBT blends increased with the increase in EPR‐graft‐GMA degrees of grafting for the same dispersion phase content when the degree of grafting was below 1.8. However, PBT/EPR‐graft‐GMA1.8 displayed much lower impact strength in the ductile region than a comparable PBT/EPR‐graft‐GMA1.3 blend (1.3 indicates degree of grafting). Morphology and mechanical results showed that EPR‐graft‐GMA 1.3 was more suitable in improving the toughness of PBT. SEM results showed that the shear yielding properties of the PBT matrix and cavitation of rubber particles were major toughening mechanisms. Copyright © 2006 Society of Chemical Industry     

Surface characterization and antibacterial activity of chitosan‐grafted poly(ethylene terephthalate) prepared by plasma glow discharge

Poly(ethylene terephthalate) (PET) texture was exposed to oxygen plasma glow discharge to produce peroxides on its surfaces. These peroxides were then used as catalysts for the polymerization of acrylic acid (AA) in order to prepare a PET introduced by a carboxylic acid group (PET‐A). Chitosan and quaternized chitosan (QC) were then coupled with the carboxyl groups on the PET‐A to obtain chitosan‐grafted PET (PET‐A‐C) and QC‐grafted PET (PET‐A‐QC), respectively. These surface‐modified PETs were characterized by attenuated total reflection Fourier transform IR spectroscopy, electron spectroscopy for chemical analysis, and a contact angle goniometer. The amounts of AA, chitosan, and QC grafted on the PET surfaces as determined by the gravimetric method were about 6, 8, and 9 μg/cm², respectively. The antibacterial activity of the surface‐modified PET textures was investigated using a shake flask method. After 6 h of shaking, the growth of bacteria was markedly inhibited by PET with ionically (86% in PET‐A^?‐C⁺) and covalently (75% in PET‐A‐C) grafted chitosan and with covalently grafted QC (83% in PET‐A‐QC). After the laundering the inhibition of the growth of the bacteria was maintained in the range of 48–58%, showing the fastness of the chitosan‐grafted PET textures against laundering. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 81: 2769–2778, 2001     

Surface characterization of 8‐quinolinyl acrylate‐grafted poly(ethylene terephthalate) prepared by plasma glow discharge and it's antibacterial activity

Poly(ethylene terephthalate) (PET) film was exposed to oxygen plasma glow discharge to produce peroxides on its surface. These peroxides were then used as catalysts for the polymerization of 8‐quinolinyl acrylate (QA) to prepare the PET grafted with QA (PET‐Q). The surface‐modified PET was characterized by attenuated total reflection Fourier transform infrared spectroscopy (ATR‐FTIR) and X‐ray photoelectron spectroscopy (XPS). The introduction of QA to the PET surface was confirmed by observing the presence of nitrogen in the XPS survey scan and high‐resolution spectra. The amount of QA grafted on to the PET surface as measured by the gravimetric method was about 5.2 μg cm^?2. The antibacterial activity of the surface‐modified PET texture was investigated by using a shake‐flask and an inhibition zone test method. After 6 h of shaking, the PET grafted with QA showed the inhibition (91%) of the growth of the gram‐positive microorganism, S. aureus. Even after laundering ten times, an effectiveness of the inhibition was found. However, little inhibition was shown with the gram‐negative microorganism, K. pneumoniae. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 863–868, 2006     

Peroxide modification of poly(butylene adipate‐co‐succinate)

We attempted to introduce crosslinking into poly(butylene adipate‐co‐succinate) (PBAS) to improve the properties, such as the mechanical strength and elasticity, by a simple addition of dicumyl peroxide (DCP). Prior to curing, the thermal stability of PBAS was investigated. Above 170°C PBAS was severely degraded, and the degradation could not be successfully stabilized by an antioxidant. The PBAS was effectively crosslinked by DCP, and the gel fraction increased as the DCP content increased. A major structure of the crosslinked PBAS was an ester and aliphatic group. The tensile strength and elongation of PBAS were improved with an increasing content of DCP, but there was little affect on the tear strength. The biodegradability of crosslinked PBAS was not seriously deteriorated. A higher degree of crosslinking gave a lower heat of crystallization and heat of fusion. However, the melt crystallization temperatures of the crosslinked PBAS were higher than that of PBAS. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 81: 637–645, 2001     

Synthesis and characterization of copolymeric aliphatic–aromatic esters derived from terephthalic acid, 1,4‐butanediol,and ε‐caprolactone by physical,thermal, and mechanical properties and NMR measurements

In this study, a series of aliphatic–aromatic poly(butylene terephthalate‐co‐ε‐caprolactone) (PBTCL) copolyesters were synthesized from various monomeric compositions of terephthalic acid (TPA), 1,4‐butanediol (BDO), and ε‐caprolactone (CL) in the presence of tetrabutyl titanate (Ti(Obu)₄) and stannous octoate (Sn(Oct)₂) as catalysts through a combination of polycondensation and ring opening polymerization. A significant increase in the melting temperature (T_m) of copolyesters was observed by increasing the TPA/(CL+TPA) molar ratio, starting from the low end (T_m 66.2°C) of pure poly‐ε‐caprolactone PCL upward. We found that PBTCL‐50, which has a TPA/(CL+TPA) 50% molar ratio and polycondensation at 260°C for 1.5 h, resulted in a proper T_m of 139.2°C that facilitates thermal extrusion from biomass or other biodegradable polymers of similar T_m. The number–average molecular weight (M_n) of 7.4 × 10⁴ for PBTCL‐50 was determined from the intrinsic viscosity [η] by using the Berkowitz model of M_n = 1.66 × 10⁵[η]^0.9. Good mechanical properties of PBTCL‐50 have been shown by tensile stretching experiment that indicates tensile strength, elongation, and Young's modulus are 11.9 MPa, 132%, and 257 MPa, respectively. Polymers with aforementioned properties are suitable for manufacturing biodegradable plastic films for downstream agricultural applications or merely for trash bag. This article reveals that the PBTCL‐50 contains all five monomers with different molar ratios and characteristical linkages between each other. The novel structure was furthermore analyzed by ¹H‐ and ¹³C‐NMR spectroscopy. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013