Syntheses of PAM microgel surfacely covered with alkyl quaternary ammonium surfactant/Keggin‐type polyoxometalate complexes

The composite microspheres of poly(lacrylamide) microgels (PAM) surfacely covered with [2‐(methacryloyloxy)ethyl]dodecyldimethylammonium (MEDDAB)‐tungstophosphate (HPW) complexes (MEDDAB‐HPW) were synthesized by using ion‐exchange reaction between MEDDAB located within the porous PAM microgels and HPW in aqueous solution. The morphology and component of the composite microspheres were characterized by scanning electron microscopy, Fourier transform infrared spectroscopy, and thermogravimetric analysis, respectively. The results indicated that PAM/MEDDAB‐HPW composite microsphere with different hierarchical surface structures could be obtained by controlling the weight ratio of MEDDAB to HPW in the microgels and cross‐linking degree of PAM microgels. Although the surface morphologies of the composite microspheres prepared in different conditions were different, a general feature was that the composite microspheres have the core‐shell structure and the wrinkly surface covered with the particles of MEDDAB‐HPW complexes. The formation of the wrinkly surface is attributed to the difference in shrinkage between inside and outside of PAM microgel frameworks due to deposition of MEDDAB‐HPW on the surface, and the formation of MEDDAB‐HPW small particles originates from the reaction between MEDDAB aggregation and HPW. For this composite microsphere, PAM hydrogel core is suitable to store water‐soluble substances, and the shell composed of the surfactant/Keggin‐type polyoxometalate complexes is not only amphiphilic but also catalytic. Additionally, PAM/MEDDAB‐HPW composite microspheres with big size and MEDDAB‐HPW particles with small size make the composite microspheres not only easy for separation but also beneficial for catalysis. This material provides an example to construct microreactors with new structure used in diphase catalytic reaction. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Synthesis and characterization of air‐stable magnetic Fe composites microspheres of narrow size distribution

Air‐stable Fe magnetic nanoparticles entrapped within carbon and porous crosslinked polystyrene microspheres of narrow size distribution were prepared by the following sequential steps: (1) Polystyrene/poly(divinyl benzene) and polystyrene/poly(styrene‐divinyl benzene) uniform micrometer‐sized composite particles were prepared by a single‐step swelling of uniform polystyrene template microspheres dispersed in an aqueous continuous phase with emulsion droplets of dibutyl phthalate containing the monomers divinyl benzene and styrene and the initiator benzoyl peroxide. The monomers within the swollen polystyrene template microspheres were then polymerized by raising the temperature to 73°C; (2) Porous poly (divinyl benzene) and poly(styrene‐divinyl benzene) uniform crosslinked microspheres were prepared by dissolution of the polystyrene template part of the former composite particles; (3) Uniform magnetic poly(divinyl benzene)/Fe and poly(styrene‐divinyl benzene)/Fe composite microspheres were prepared by entrapping Fe(CO)₅ within the porous crosslinked microspheres, by suction of the Fe complex into the dried porous particles, followed by decomposition of the encapsulated Fe(CO)₅ at 200°C in Ar atmosphere; (4) Uniform magnetic air‐stable C/Fe composite microspheres were prepared similarly, apart from changing the decomposition temperature from 200 to 600°C. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Preparation of magnetic poly(lactic‐co‐glycolic acid) microspheres with a controllable particle size based on a composite emulsion and their release properties for curcumin loading

Because of their unique magnetic features and good biocompatibility, magnetic poly(lactic‐co‐glycolic) acid (PLGA) microspheres have great application potential in magnetic targeted drug‐delivery systems. In this research, magnetic PLGA microspheres with controllable particle sizes were successfully prepared from a composite emulsion with a T‐shaped microchannel reactor. A water‐in‐oil‐in‐water composite emulsion was generated by the injection of a dichloromethane/gelatin water‐in‐oil initial emulsion into the microchannel together with a coating aqueous phase, that is, the aqueous solution of glucose and poly(vinyl alcohol). The mean particle size of the microspheres could be controlled by the manipulation of the osmotic pressure difference between the internal and external aqueous phases via changes in the glucose concentration. Curcumin, a drug with an inhibitory effect on tumor cells, was used to exemplify the release properties of the magnetic PLGA microspheres. We found that the mean particle size of the microspheres ranged from 16 to 207 μm with glucose concentrations from 0 to 20 wt %. The resulting microspheres showed a rapid magnetic response, good superparamagnetism, and a considerable magnetocaloric effect, with a maximum magnetic entropy of 0.061 J·kg^?1·K^?1 at 325 K. An encapsulation efficiency of up to 77.9% was achieved at a loading ratio of 3.2% curcumin. A release ratio of 72.4% curcumin from the magnetic PLGA microspheres was achieved within 120 h in a phosphate‐buffered solution. The magnetic PLGA microspheres showed potential to be used as drug carriers for magnetic targeted tumor therapy. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43317.     

α‐Amylase immobilized by Fe3O4/poly(styrene‐co‐maleic anhydride) magnetic composite microspheres: Preparation and characterization

Fe₃O₄/poly(styrene‐co‐maleic anhydride) core–shell composite microspheres, suitable for binding enzymes, were prepared using magnetite particles as seeds by copolymerization of styrene and maleic anhydride. The magnetite particles were encapsulated by polyethylene glycol, which improved the affinity between the magnetite particles and the monomers, thus showing that the size of the microspheres, the amount of the surface anhydrides, and the magnetite content in the composite are highly dependent on magnetite particles, comonomer ratio, and dispersion medium used in the polymerization. The composite microspheres, having 0.08–0.8 μm diameter and containing 100–800 μg magnetite/g microspheres and 0–18 mmol surface‐anhydride groups/g microsphere, were obtained. Free α‐amylase was immobilized on the microspheres containing reactive surface‐anhydride groups by covalent binding. The effects of immobilization on the properties of the immobilized α‐amylase [magnetic immobilized enzyme (MIE)] were studied. The activity of MIE and protein binding capacity reached 113,800 U and 544.3 mg/g dry microspheres, respectively. The activity recovery was 47.2%. The MIE had higher optimum temperature and pH compared with those of free α‐amylase and showed excellent thermal, storage, pH, and operational stability. Furthermore, it can be easily separated in a magnetic field and reused repeatedly. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 95: 328–335, 2005     

The formation of asymmetric polystyrene/saponite composite nanoparticles via miniemulsion polymerization

The synthesis of asymmetric spherical nanoparticles has attracted great interest because their anisotropic structure can be used as unique building blocks for constructing advanced materials. In this article, we report the formation of hemispherical or truncated polystyrene/nanosaponite composite particles via one‐pot miniemulsion polymerization. It was found that the morphology of final composite latex particles strongly depends on the size of the nanoclay and its surface properties. Hemisphere or truncated sphere is the dominant morphology if the size of the nanoclay is larger than 100 nm. With the increase of the nanoclay content (up to 30 wt %), the fraction of hemispherical or truncated polystyrene/nanosaponite composite latex particles increased accordingly. The formation of hemispherical particles is possibly attributed to either the asymmetric growth of polymer chains on one side of the hydrophobically modified clay or the mechanical peeling‐off of large spherical particles between polymer and saponite. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Polymer–metal composite particles: Metal particles on poly(St‐co‐MAA) microspheres

Poly(styrene‐co‐methacrylic acid) P(St‐co‐MAA) microspheres with a monodisperse size distribution were prepared by emulsifier‐free emulsion copolymerization of St and MAA. The effects of MAA content on the polymerization rate and the content of MAA in the copolymer were investigated by gravimetrical and IR methods, respectively. The results of XPS measurement indicated the presence of a carboxyl functional group. By chemical metal deposition, nickel or palladium particles were formed and deposited on the surface of P(St‐co‐MAA) microspheres to form P(St‐co‐MAA)Ni or P(St‐co‐MAA)Pd composite particles. XRD measurement and TEM observation confirmed that nickel and palladium metal particles in a small size (20–40 nm) were distributed on surface of the copolymer microspheres. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 75: 1693–1698, 2000     

Preparation and characterization of porous titanium dioxide sulfonated polystyrene composite microspheres with amphiphilicity

Porous particles with amphiphilicity were prepared by a nonpolymeric pore‐formation process with the sulfonation of polystyrene microspheres. Nano titanium dioxide (TiO₂) particles were then grafted onto the surface via a sol–gel method to finally form the composite particles. The effects of the mass ratio of ethanol (EtOH) to water, temperature, and solubility parameter on the pore‐formation process is discussed in detail. The morphology, porous structure, and wetting properties of the particles were studied by scanning electron microscopy, transmission electron microscopy, Fourier transform infrared (FTIR) spectroscopy, and contact angle measurement. The results show that porous sulfonated polystyrene (SP) microspheres could be fabricated at 60°C with a 1 : 1 mass ratio of EtOH–water and a solubility parameter of 29.69 MPa^1/2. The TiO₂ particles were determined to be grafted onto the SP microspheres by physical‐bond interaction on the basis of FTIR analysis. The contact angles for both water (aqueous‐phase) and various organic solvent (oil‐phase) droplets with different polarities on the surface of compressed tablets of TiO₂–SP powder were all lower than 30°; this indicated excellent amphiphilicity in the composite particles. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Preparation of hybrid composite microspheres containing nanosilicon via microsuspension polymerization

Hybrid composite microspheres with nano‐Si as the core and poly(styrene‐co‐acrylonitrile) as a shell are successfully prepared by a two‐step polymerization technique, which includes dispersion polymerization of styrene and 3‐methacryloxypropyl trimethoxysilane in ethanol for surface modification of nano‐Si followed by microsuspension polymerization of styrene and acrylonitrile in an aqueous phase for encapsulating nano‐Si into an SAN copolymer matrix. The structure and surface properties of modified nano‐Si are investigated by Fourier transform infrared spectroscopy (FTIR) and contact angle. The hybrid composite microspheres are systematically characterized by energy dispersive spectroscopy, thermogravimetric analysis, and transmission electron microscopy (TEM). According to the FTIR spectra and the contact angle experiments, it was determined that a hydrophobic polymer layer was formed on the surface of nano‐Si. TEM showed that nano‐Si was homogeneously dispersed in SAN particles when the loading capacity of nano‐Si in the hybrid composite microspheres was less than 20 wt %. Moreover, scanning electron microscopy and X‐ray photoelectron spectroscopy revealed that there were large amounts of nano‐Si absorbed on the surface of the hybrid composite microspheres, and the mean particle size became much larger when the loading amounts of nano‐Si reached 25 wt %. From this, it can be inferred that nano‐Si overflows from the inner core to the outside surface in the emulsification process and acts as an inorganic dispersant. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43101.     

Preparation of monodisperse magnetic polystyrene microspheres and its surface chemical modification

Monodisperse magnetic polystyrene (PS) microspheres were prepared in the presence of PS seed particles and styrene‐based magnetic colloid by the method of magnetic colloid swelling polymerization. The PS seed particles were prepared in advance by soap‐free emulsion polymerization. Styrene‐based magnetic colloid was used for swelling the PS seed particles in the magnetic colloid swelling polymerization process. After polymerization, functional amino groups were introduced onto the surface of the magnetic PS microspheres by surface Friedel‐Crafts acylation reaction. The morphology, size distribution, and magnetic properties of magnetic PS microspheres were characterized with scanning electron microscopy (SEM) and vibrating sample magnetometer (VSM), respectively. SEM showed that the magnetic PS microspheres had an average size of 1078 nm with a narrow size distribution. VSM showed that the magnetic PS microspheres were superparamagnetic, and saturation magnetization was found to be 5.714 emu/g. The concentration of functional amino groups on the surface of magnetic PS microspheres was measured by atomic absorption spectroscopy and UV−Vis spectroscopy, and the concentration of amino groups was found to be 0.168 mmol/g. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Fe_3O_4/P(ST-AA)核—壳复合微球的制备和表征

本文以磁性氧化铁胶体粒子为种子,运用分散聚合法,制备出具有磁响应性Fe_3O_4/P(SI-AA)核—壳复合微球。考察了复合微球的形态及结构,测定了复合徽球的粒径和磁响应性,研究了分散介质,引发剂,聚合单体和种子粒子等因素对复合徽球形成的影响。适当调整有关反应条件,采用分散聚合法,可以使复合微球粒径达到23.0μm,磁性氧化铁含量达到9.0mg/s。     

Chemically bonded iron carbonyl for magnetic composites based on phthalonitrile polymers

Dicarboxylic acid‐containing 1,3‐benzoxazine was synthesized and chemically bonded on iron carbonyl particles using a post‐coating method. Novel organic–inorganic hybrid magnetic composites were prepared via the interfacial reaction between magnetic phthalonitrile prepolymers and the benzoxazine functional coatings that chemically modified the iron carbonyl particles. The results showed that, compared with pure iron carbonyl particles, the modified particles could cure the phthalonitrile prepolymers efficiently and improve the interfacial compatibility of the functional composites. The magnetic composites with chemically modified particles exhibited stronger magnetism in comparison to composites containing bare particles: the saturation magnetization of the magnetic composites with equal concentration (5 wt%) of Fe(CO)₅ increased from 41.12 to 48.82 emu g^?1. Also, the magnetic composites obtained demonstrated excellent thermal stability up to 500 °C. Copyright © 2010 Society of Chemical Industry     

Protein‐imprinted soft‐wet gel composite microspheres with magnetic susceptibility. II. Characteristics

Protein‐imprinted soft‐gel composite microspheres with magnetic susceptibility (MS‐PIGMs) were prepared by inverse suspension polymerization using Fe₃O₄ particles as magnetically susceptible component and bovine serum albumin and lysozyme (Lyz) as templates, respectively. The average content of magnetically susceptible component (Fe₃O₄) inside MS‐PIGMs was determined using thermogravimetric analyzer, and the magnetic characteristics of MS‐PIGMs were measured by vibrating sample magnetometer. The results showed that the resulting MS‐PIGMs had a certain magnetic response to external magnetic fields, and their average content of Fe₃O₄ was 2.08%. Their recognition specificity was investigated using BSA and Lyz as both templates and control molecules and characterized by high‐performance liquid chromatography, and the mechanism of imprinting and recognition was analyzed. It was shown that the resulting BSA imprinted soft‐gel composite microspheres with magnetic susceptibility (BSA‐PIGMs) and Lyz imprinted soft‐gel composite microspheres with magnetic susceptibility (Lyz‐PIGMs). All exhibited good recognition selectivity for their templates, and the relative separation factor (β) was 4.75 and 5.88, respectively. The recognition selectivity of MS‐PIGMs to their templates depended mainly on the synergic action of a large quantity of hydrogen binding being caused by complementation and very close contact of outer surface of proteins with inner surface of “imprinting cavities.” © 2005 Wiley Periodicals, Inc. J Appl Polym Sci, 2006     

Synthesis and properties of amphiphilic nonspherical SPS/PS composite particles by multi-step seeded swelling polymerization

Amphiphilic nonspherical particles have asymmetric surface physical and chemical properties. Such a unique structure makes them suitable for applications in many areas, such as chemical and biological sensors, colloidal surfactants, self-assembly, building blocks of complex superstructures, and materials engineering. In this study, amphiphilic sulfonated polystyrene/polystyrene (SPS/PS) composite particles with controllable morphologies are synthesized by combining modified treatment and multistage seeded swelling polymerization. Core-shell SPS particles were first obtained by modifying cross-linked PS particles with concentrated sulfuric acid, and the surface of SPS particles was a hydrophilic sulfonated polystyrene layer. With further twice seeded swelling polymerization, new hydrophobic PS oil phase sprouted on the strong hydrophilic surface even without any surfactant assistance in aqueous media. The morphologies of these SPS/PS composite particles could be adjusted by changing the crosslinking density of the seed microspheres, the sulfonation temperature and the swelling ratio of monomer/seed. These polymer composite particles can be used as solid surfactants.     

Initiation of surface graft polymerization by ceric ions on polymer microspheres

The surface graft polymerization of acrylamide on poly(styrene‐co‐acrylonitrile) copolymer microspheres by the initiation of ceric ions was studied. The grafting was verified by IR spectra and X‐ray photoelectron spectroscopy measurements. The resultant microspheres with surface‐grafted polymer chains were employed in the preparation of polymer‐microsphere‐supported palladium composite particles. The composite particles were then studied by transmission electron microscopy and X‐ray diffraction. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 936–940, 2003     

Surface‐initiated nitroxide‐mediated radical polymerization of 4‐vinylpyridine on magnetite nanoparticles

Poly (4‐vinylpyridine) (P4VP) brushes had been prepared by the surface‐initiated nitroxide‐mediated radical polymerization of 4‐VP on the surface of 3‐methacryloxyproyltrimethoxysilane (3‐MPS)‐modified magnetite nanoparticles with an average diameter of 30 nm. The grafting polymerization was accomplished by nitroxide‐mediated polymerization of 4‐VP, using 4‐hydroxyl‐2,2,6,6‐tetramethyl‐1‐piperidinyl‐oxy (HTEMPO·) free radical as capping agent and benzoyl peroxide (BPO) as initiator. X‐ray photoelectron spectra (XPS) measurement demonstrated that the alkoxysilane initiator layer had formed on the magnetite surface. Gel permeation chromatograph analysis and XPS measurement suggested that the amount of grafted P4VP increases with increasing grafting time. The amount of P4VP grafted on the surface could be determined to be 0.09 chains/nm² by thermogravimetric analysis. The P4VP‐grafted magnetite particles exhibited the characteristics of multidomain system, distinct from the single domain attributes of the pure magnetite particles. Atomic force‐microscopy analysis revealed the diameter of the grafted P4VP magnetic latex particles is in the range of 120 nm to 150 nm. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Controlled preparation of Fe3O4/P (St-MA) magnetic composite microspheres by DPE method

In this work, controlled radical polymerization based on 1, 1-diphenylethylene (DPE method) was used to prepare magnetic composite microspheres. By this method, Fe₃O₄/P (St-MA) magnetic composite microspheres were prepared via copolymerization of styrene (St) and maleic anhydride (MA) using DPE as radical control agent in the presence of Fe₃O₄ nanoparticles. The structure and properties of the magnetic composite microspheres obtained were characterized by IR, ¹H-NMR, SEC-MALLS, TEM, TGA, VSM, DLS and other instruments. It was found that the DPE method allows the controlled preparation of magnetic composite microspheres, and Fe₃O₄/ P(St-MA) microspheres possess perfect sphere-shaped morphology, homogeneous particle size, carboxylic surface, superparamagnetism with a saturation magnetization of 14.704 emu/g, and magnetic content with a value of 25%.     

Preparation of heat resisting poly(methyl methacrylate)/graphite composite microspheres used as ultra‐lightweight proppants

Ultra‐lightweight heat resisting poly(methyl methacrylate) (PMMA)/graphite microspheres were successfully prepared via in situ suspension polymerization. The Fourier transform infrared and X‐ray powder diffraction results confirmed the successful preparation of the composite microspheres. Field emission scanning electron microscope analysis illustrated that the graphite particles were dispersed in microspheres and the PMMA/graphite composite microspheres had good sphericity and roundness. Furthermore, density analysis indicated that the apparent density of composites microspheres was about 1.055–1.135g/cm³ which was suitable for the transmission with water carrying. The results from thermodynamic test revealed that the thermal stability of the composite was significantly improved with increasing graphite content, which could be used as ultra‐lightweight proppant in deep underground. In addition, the crushing rate decreased to 0.5% with graphite ratio of 3.0% at the pressure of 69 MPa. Therefore, PMMA/Graphite composite microspheres exhibit a promising application in petroleum or gas exploitation as water carrying fracturing proppants. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41924.     

Carbonization of PAN grafted uniform crosslinked polystyrene microspheres

Micrometer-sized polystyrene/poly(styrene-divinylbenzene) and polystyrene/polydivinylbenzene composite particles of narrow size distribution were formed by a single-step swelling process of uniform polystyrene template particles with emulsion droplets of dibutyl phthalate containing benzoyl peroxide and divinylbenzene in the presence or absence of styrene, followed by polymerization of the monomer(s) within the swollen template particles at 70 °C. Porous poly(styrene-divinylbenzene) and polydivinylbenzene uniform microspheres were formed by dissolution of the polystyrene part of the former composite particles. Hydroperoxide conjugated microspheres were formed by ozonolysis of the former porous microspheres. Uniform poly(styrene-divinylbenzene)/PAN and polydivinylbenzene/PAN core/shell microspheres were prepared by room temperature redox graft polymerization of AN onto the hydroperoxide conjugated particles. Uniform carbon microspheres were prepared by carbonization of the core/shell particles at 800 and 1100 °C under dynamic N₂ atmosphere. On the other hand, a similar treatment of the core particles only resulted in destruction of the particle shape. Carbon microspheres of increasing surface area (up to ca. 1000 m²/g) were prepared by activation of the former carbon microspheres with CO₂ at 850 °C. The influence of the carbonization temperature of the core/shell particles and the activation time of the carbon particles on the carbon yield and surface area has been elucidated.     

Drug‐loaded microparticles prepared by the one‐step deposition of calcium carbonate/alginate onto cotton fabrics

Calcium carbonate (CaCO₃)/alginate inorganic–organic hybrid particles were synthesized and deposited on to the surface of cotton fabrics with a novel one‐step procedure. The effects of the Ca²⁺/CO₃^2?/alginate molar ratio on the cotton matrix were investigated. The optimization of the process resulted in a regular shaped hybrid microparticles, and scanning electron microscopy revealed that the particles were uniformly distributed on the surface of the fibers. Dynamic light scattering showed that the particles were about 2 μm in diameter. Moreover, transmission electron microscopy images demonstrated that the core–shell structure of the particles existed along with CaCO₃ evenly enfolded into the alginate layer. An X‐ray diffraction pattern displayed that the alginate/CaCO₃ hybrid microparticles were a mixture of calcite and vaterite crystal. Fourier transform infrared spectroscopy indicated that CaCO₃/alginate hybrid particles formed in situ were the only deposited materials. The thermogravimetric analysis curve indicated a certain mass ratio of the alginate and CaCO₃ in the hybrid particles. Furthermore, the drug‐loading and drug‐release properties of the hybrid microspheres were studied, and the results show that the water‐soluble diclofenac sodium could be effectively loaded in the hybrid microparticles and the drug release could be effectively sustained. Finally, both of the microparticles and modified fabrics had good cytocompatibility. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42618.     

Preparation of superparamagnetic immunomicrospheres and application for antibody purification

A novel and effective protocol for the preparation of superparamagnetic immunomicrospheres has been developed. First, micro‐size magnetic poly (methacrylate‐divinylbenzene) (PMA‐DVB) spheres were prepared by a modified suspension polymerization method. The oleic acid coated magnetite (Fe₃O₄) nanoparticles made by coprecipitation were mixed with monomers of MA, DVB, and initiator benzoyl peroxide (BPO) to form oil in water emulsion droplets with the presence of poly (vinyl alcohol) (PVA‐1788) as a stabilizer. The polymerization reaction was carried out in a 2‐L beaker equipped with four vertical stainless steel baffleplates by increasing the temperature of the mixture at a controlled rate. The resulting magnetic microspheres are micro‐sized (less than 8μm in diameter) and 80 percent of them are in the size ranging from 1 to 5 μm. Then, they were highly functionalized via ammonolysis reaction with ethylenediamine, and the surface amino‐modified magnetic microspheres were obtained. The morphology and properties of these magnetic microspheres were examined by SEM, TEM, VSM, and FT‐IR. Affinity ligand protein A (ProtA) was covalently immobilized to the amino‐modified magnetic microspheres by the glutaraldehyde method. These ProtA‐immobilized magnetic immunomicrospheres were effective for affinity bioseparation processes, as was demonstrated by the efficient immunoaffinity purification of antibodies IgG2a (22mg per gram of microspheres) from mouse ascites. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 94: 2205–2211, 2004