Implications of the structure of cementitious wastes containing Pb(II), Cd(II), As(V), and Cr(VI) on the leaching of metals

Cement stabilisation has been widely applied for the immobilisation of heavy metal ions before their disposal in landfills. This paper investigated the microstructure of cementitious wastes containing Pb, Cd, As, and Cr using an electron probe microanalyser and examined the implications of the microstructure on the leaching of the metal ions. From the microstructure analysis, it was proposed that Pb, As, and Cr ions were homogeneously dispersed in the calcium silicate hydrate (C-S-H) matrix by adsorption or precipitation with calcium or silicate compounds present in the cement. However, Cd formed discrete Cd(OH)₂ precipitates believed to be contained within the cement pores or adsorbed on the C-S-H matrix. The leaching of metals in the pH region of 6 to 8 decreased in the following order: Cr(VI)>Cd(II)>Pb(II)>As(V). This leaching trend was found to be influenced by the manner in which the metal ions were incorporated into the cement matrix.     

Removal of Cu(II), Cr(III), and Cr(VI) from Aqueous Solution using a Novel Agricultural Waste Adsorbent

A novel adsorbent, chufa corm peels (CCP), is used for removing Cu(II), Cr(III), and Cr(VI) from aqueous solutions. The adsorption ability and characteristics of the CCP are thoroughly investigated. The adsorption capability for three heavy metal ions is in the order of Cu(II) > Cr(III) > Cr(VI). The morphology and elemental distribution on the biomass of CCP were evaluated by scanning electron microscopy (SEM) and energy dispersive spectrometry (EDS). Fourier-transform infrared spectroscopy (FTIR) analysis revealed that oxygen-containing functional groups, especially carboxylic and hydroxyl groups were responsible for chemical coordination between ionizable functional groups and metal ions. The adsorption features were evaluated based on the batch biosorption experiment. The results showed that the adsorption well meets the Freundlich adsorption isotherm models and pseudo-second-order kinetics model. In summary, this work demonstrated that CCP is an attractive, efficient, and low-cost adsorbent biomaterial that can be used for the removal of heavy metals from environmental contaminations.     

Adsorption of Cr(III), Ni(II), Zn(II), Co(II) ions onto phenolated wood resin

In this study, phenolated wood resin was used an adsorbent for the removal of Cr(III), Ni(II), Zn(II), Co(II) ions by adsorption from aqueous solution. The adsorption of metal ions from solution was carried at different contact times, concentrations and pHs at room temperature (25°C). For individual metal ion, the amount of metal ions adsorbed per unit weight of phenolated wood resin at equilibrium time increased with increasing concentration and pH. Also, when the amounts of metal ions adsorbed are compared to each other, it was seen that this increase was order of Cr(III) > Ni(II) > Zn(II) > Co(II). This increase was order of Cr(III) > Ni(II) > Co(II) > Zn(II) for commercial phenol–formaldehyde resin. Kinetic studies showed that the adsorption process obeyed the intraparticle diffusion model. It was also determined that adsorption isotherm followed Langmuir and Freundlich models. Adsorption isotherm obtained for commercial phenol–formaldehyde resin was consistent with Freundlich model well. Adsorption capacities from Langmuir isotherm for commercial phenol–formaldehyde resin were higher than those of phenolated wood resin, in the case of individual metal ions. Original adsorption isotherm demonstrated the monolayer coverage of the surface of phenolated wood resin. Adsorption kinetic followed the intraparticle diffusion model. The positive values of ΔG° determined using the equilibrium constants showed that the adsorption was not of spontaneous nature. It was seen that values of distribution coefficient (K_D) decreasing with metal ion concentration in solution at equilibrium (C_e) indicated that the occupation of active surface sites of adsorbent increased with metal ions. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 2838–2846, 2006     

Adsorption Behavior of Iminodiacetic Acid Type of Chelating Gel Prepared from Waste Paper

Abstract

Adsorption gel was prepared from waste recycled paper by immobilizing iminodiacetic acid (IDA) functional group by chemical modification. The gel exhibited good adsorption behavior for a number of metal ions viz. Cu(II), Pb(II), Fe(III), Ni(II), Cd(II), and Co(II) at acidic pH. The order of selectivity was found to be as follows: Cu(II)>Pb(II)>Fe(III)>Ni(II)～Cd(II)～Co(II). From the adsorption isotherms, the maximum adsorption capacity of the gel for both Cu(II) and Pb(II) was found to be 0.47 mol/kg whereas that for Cd(II) was 0.24 mol/kg. A continuous flow experiment for Cd(II) showed that the gel can be useful for pre‐concentration and complete removal of Cd(II) from aqueous solution.     

Adsorption characterization of lead(II) and cadmium(II) on crosslinked carboxymethyl starch

The adsorption of Pb(II) and Cd(II) ions with crosslinked carboxymethyl starch (CCS) was investigated as function of the solution pH, contact time, initial metal‐ion concentration, and temperature. Isotherm studies revealed that the adsorption of metal ions onto CCS better followed the Langmuir isotherm and the Dubinin–Radushkevich isotherm with adsorption maximum capacities of about 80.0 and 47.0 mg/g for Pb(II) and Cd(II) ions, respectively. The mean free energies of adsorption were found to be between 8 and 16 kJ/mol for Pb(II) and Cd(II) ions; this suggested that the adsorption of Pb(II) and Cd(II) ions onto CCS occurred with an ion‐exchange process. For two‐target heavy‐metal ion adsorption, a pseudo‐second‐order model and intraparticle diffusion seem significant in the rate‐controlling step, but the pseudo‐second‐order chemical reaction kinetics provide the best correlation for the experimental data. The enthalpy change for the process was found to be exothermic, and the ΔS^θ values were calculated to be negative for the adsorption of Pb(II) and Cd(II) ions onto CCS. Negative free enthalpy change values indicated that the adsorption process was feasible. The studies of the kinetics, isotherm, and thermodynamics indicated that the adsorption of CCS was more effective for Pb(II) ions than for Cd(II) ions. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

HDPE chelate membranes prepared by preirradiation grafting for adsorption of heavy metal ions

A new chelate membrane was prepared by grafting of glycidyl methacrylate (GMA) onto high‐density polyethylene membranes and subsequent amination of poly‐GMA graft chains. The effects of grafting conditions such as radiation dose and temperature on grafting yield were studied. Effects of various parameters such as grafting yield, pH, and adsorption time on the metal uptake were investigated. The results show that the maximum metal uptake followed as given in the order Cr (III)>Fe (III)>Cu (II)>Cd (II). The metal uptake increased with grafting yield, adsorption time, pH of the medium, and initial concentration. The chelated metal ions are easily desorbed with 0.1 mol/L hydrochloric acid at room temperature. The results obtained from the chelate membrane showed a promising application in extraction of heavy metal ions from industrial effluents. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Preparation of amidoximated polyester fiber and competitive adsorption of some heavy metal ions from aqueous solution onto this fiber

In this study, a fibrous adsorbent containing amidoxime groups was prepared by graft copolymerization of acrylonitrile (AN) onto poly(ethylene terephthalate) (PET) fibers using benzoyl peroxide (Bz₂O₂) as initiator in aqueous solution, and subsequent chemical modification of cyano groups by reaction with hydroxylamine hydrochloride in methanol. The grafted and modified fibers were characterized by FTIR, TGA, SEM, and XRD analysis. The crystallinity increased, but thermal stability decreased with grafting and amidoximation. The removal of Cu(II), Ni(II), Co(II), Pb(II), and Cd(II) ions from aqueous solution onto chelating fibers were studied using batch adsorption method. These properties were investigated under competitive conditions. The effects of the pH, contact time, and initial ion concentration on the removal percentage of ions were studied. The results show that the adsorption rate of metal ions followed the given order Co(II) > Pb(II) > Cd(II) > Ni(II) > Cu(II). The percentage removal of ions increased with initial ion concentration, shaking time, and pH of the medium. Total metal ion removal capacity was 49.75 mg/g fiber on amidoximated fiber. It was observed that amidoximated fibers can be regenerated by acid without losing their activity, and it is more selective for Pb(II) ions in the mixed solution of Pb‐Cu‐Ni–Co‐Cd at pH 4. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Poly(4-sodium styrene sulfonate-co-4-acryloylmorpholine). Synthesis,Characterization, and Metal Ion Retention Properties

Abstract

A novel resin poly(sodium 4-styrene sulfonate-co-4-acryloyl morpholine) was synthesized through a radical solution polymerization in solution and studied as an adsorbent under uncompetitive and competitive conditions by batch and column equilibrium procedures for the following divalent metal ions Cd(II), Zn(II), Pb(II), and Hg(II), and trivalent Cr(III). For all metal ions, the adsorption was strongly influenced by the pH. The maximum retention capacity, 3.29 mmol of metal ion/g, was obtained for Zn(II) at pH 5 by batch equilibrium procedure. For both the batch and column procedures, the retention behavior was similar for Cd(II), Cr(III), Zn(II), and Pb(II).     

Sorption of Uranium and other Metal Ions on Amine-Functionalized Silica Materials

Sorption of U(VI) and other metal ions on amine-functionalized silica was studied, including aminopropylsilica (APS), 3-(ethylenediamino)propyl silica (ENPS), and 3-[2-(2-aminoethylamino)ethylamino]propyl silica (DIENPS). DIENPS showed the strongest and fastest sorption for U(VI) that can be described by Langmuir isotherm, suggesting U(VI) was sorbed at well-defined and energetically identical sites independent from each other. The sorption efficiency of DIENPS follows the order: U(VI) > Fe(III) > Cu(II) > Pb(II) > Ni(II) > Mg(II) > Sr(II). Results demonstrate that the amine-functionalized silica materials could be used as efficient sorbents to remove uranium and hazardous metal ions in environmental remediation.     

PREPARATION AND ADSORPTION PROPERTIES OF THE POLYSTYRENE RESIN HAVING DIETHYLENETRIAMINE-N,N′- BIS(METHYLENEPHOSPHONATE) GROUP

Styrene-divinylbenzene copolymer beads containing diethylenetriamine-N,N′-bis(methylenephosphonate) group have been synthesized. The adsorption properties, of the present resin for some trivalent and bivalent metal ions have been examined. The selectivity sequence of the present resin at pH lower than 2.0 is as follows: Ga(III)> A1(III)> Sm(III)>Cu(II)>Co(II)>Zn(II)>Ca(II). The present resin reveals remarkable selectivity for the trivalent metal ions. The selective concentration of In(III) Ga(III) and Sm(III) from an acidic aqueous solution has been demonstrated by using a column of the present resin.     

Adsorption of heavy‐metal ions on poly(ethylene imine)‐immobilized poly(methyl methacrylate) microspheres

Poly(methyl methacrylate) (PMMA) microspheres carrying poly(ethylene imine) (PEI) were prepared for the removal of heavy‐metal ions (copper, cadmium, and lead) from aqueous solutions with different amounts of these ions (50–600 mg/L) and different pH values (3.0–7.0). Ester groups in the PMMA structures were converted to imine groups in a reaction with PEI as a metal‐chelating ligand in the presence of NaH. The adsorption of heavy‐metal ions on the unmodified PMMA microspheres was very low [3.6 μmol/g for Cu(II), 4.6 μmol/g for Cd(II), and 4.2 μmol/g for Pb(II)]. PEI immobilization significantly increased the heavy‐metal adsorption [0.224 mmol/g for Cu(II), 0.276 mmol/g for Cd(II), and 0.126 mmol/g for Pb(II)]. The affinity order of adsorption (in moles) was Cd(II) > Cu(II) > Pb(II). The adsorption of heavy‐metal ions increased with increasing pH and reached a plateau value around pH 5.5. Their adsorption behavior was approximately described with the Langmuir equation. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 81: 197–205, 2001     

Adsorption of copper(II), cobalt(II), and iron(III) ions from aqueous solutions on poly(ethylene terephthalate) fibers

The adsorption behavior of poly(ethylene terephthalate) (PET) fibers towards copper(II), cobalt(II), and iron(III) ions in aqueous solutions was studied by a batch equilibriation technique. Influence of treatment time, temperature, pH of the solution, and metal ion concentration on the adsorption were investigated. Adsorption values for metal ion intake followed the following order: Co(II) > Cu(II) > Fe(III). One hour of adsorption time was found sufficient to reach adsorption equilibrium for all the ions. The rate of adsorption was found to decrease with the increase in the temperature. Langmuir adsorption isoterm curves were found to be significant for all the ions studied. The heat of adsorption values were calculated as −5, −2.8, and −3.6 kcal/mol for Cu(II), Co(II), and Fe(III) ions, respectively. © 1998 John Wiley & Sons, Inc. J Appl Polym Sci 68: 1935–1939, 1998     

Molecularly imprinted polymer for solid phase extraction of nicotinamide in pork liver samples

Aromatic polyamides and polythioamides with pendent chlorobenzylidine rings were synthesized through direct polycondenzation of 2‐(p‐chlorobenzalimino) terephthalic acid with the diamines 4,4′‐oxidianiline (1a), 4,4′‐methylenediamide (1b), 4,4′‐diaminodiphenyl sulfone (1c), and thioamines 4,4′‐(bisthiourea) diphenyl ether (3a), 4,4′‐(bisthiourea) diphenyl methane (3b), 4,4′‐(bisthiourea) diphenyl sulfone (3c), respectively, in DMF using P(OPh)₃/pyridine. The polymers were precipitated using water as nonsolvent. FTIR and ¹H‐NMR spectroscopic analysis was used to characterize the monomers and polymers. Representative polyamides and polythioamides were used for the removal of heavy metal ions such as Pb(II), Cd(II), Cu(II), and Cr(III) from aqueous solutions. The effects of pH, contact time, and initial concentration on the uptake of metal ions have been investigated. The adsorption capacities under competitive conditions were in the order Pb (II) > Cu (II) > Cr (III) > Cd (II). The adsorbed ions were eluted by treatment with 2N HCl, and the activities of the polymers are retained after fourth regeneration. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Modern hybrid sorbents – New ways of heavy metal removal from waters

The possibility of hybrid ion exchanger (HIX) application in the simultaneous removal of heavy metal ions such as Cr(VI), Cu(II) and Zn(II) as well as Cd(II) and Pb(II) was presented. The ion exchanger in question combines the unique properties of hydrated metal oxides with the mechanical and thermal stability of synthetic ion exchangers. The kinetics of the sorption process of Cr(VI), Cu(II) and Zn(II) as well as Cd(II) and Pb(II) in the presence of Cl⁻, NO₃⁻ and SO₄²⁻ as well as EDDS (ethylenediaminedisuccinic acid) was also analyzed. Additionally, the effect of initial concentration, phase contact time and pH was also studied. Taking into account the possibility of its application on a large scale, the parameters of the adsorption process were estimated based on the linear form of the Langmuir and Freundlich isotherms.     

Preparation and characterization of magnetic polymethylmethacrylate microbeads carrying ethylene diamine for removal of Cu(II), Cd(II), Pb(II), and Hg(II) from aqueous solutions

Magnetic polymethylmethacrylate (mPMMA) microbeads carrying ethylene diamine (EDA) were prepared for the removal of heavy metal ions (i.e., copper, lead, cadmium, and mercury) from aqueous solutions containing different amount of these ions (5–700 mg/L) and at different pH values (2.0–8.0). Adsorption of heavy metal ions on the unmodified mPMMA microbeads was very low (3.6 μmol/g for Cu(II), 4.2 μmol/g for Pb(II), 4.6 μmol/g for Cd(II), and 2.9 μmol/g for Hg(II)). EDA‐incorporation significantly increased the heavy metal adsorption (201 μmol/g for Cu(II), 186 μmol/g for Pb(II), 162 μmol/g for Cd(II), and 150 μmol/g for Hg(II)). Competitive adsorption capacities (in the case of adsorption from mixture) were determined to be 79.8 μmol/g for Cu(II), 58.7 μmol/g for Pb(II), 52.4 μmol/g for Cd(II), and 45.3 μmol/g for Hg(II). The observed affinity order in adsorption was found to be Cu(II) > Pb(II) > Cd(II) > Hg(II) for both under noncompetitive and competitive conditions. The adsorption of heavy metal ions increased with increasing pH and reached a plateau value at around pH 5.0. The optimal pH range for heavy‐metal removal was shown to be from 5.0 to 8.0. Desorption of heavy‐metal ions was achieved using 0.1 M HNO₃. The maximum elution value was as high as 98%. These microbeads are suitable for repeated use for more than five adsorption‐desorption cycles without considerable loss of adsorption capacity. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 78: 81–89, 2000     

Heavy metals removal from solution by polyaniline/palygorskite composite

Batch adsorption experiments were carried out to remove heavy metal ions such as Cu (II), Ni (II), Cd (II), and Cr (VI) from single‐metal solutions using a polyaniline/palygorskite (PP) composite. Different parameters affecting the adsorption capacity such as contact time and pH of the solution have been investigated. The structural characteristics of the PP composite were studied in this work. Atomic absorption spectroscopy was used for the measurement of heavy metal contents, and the adsorption capacity (q_e) calculated were 114 mg Cu (II) g^?1, 84 mg Ni (II) g^?1, 56 mg Cd (II) g^?1, and 198 mg Cr (VI) g^?1 under optimal conditions. The removal of the metal ions from solutions was assigned to chelation, ionic exchange, and electrostatic attraction. Data from this study proved that the novel organic/inorganic composite presents great potential in the recovery and elimination of noble or heavy metal ions from industrial wastewater. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011.     

Adsorption properties of poly(acrylaminophosphonic-carboxyl-hydrazide)type chelating fiber for heavy metal ions

In this article, the adsorption properties of poly(acrylaminophosphonic-carboxyl-hydrazide) chelating fibers for Cu(II), Cd(II), Co(II), Mn(II), Pb(II), Zn(II), Ni(II), and Cr(III) are investigated by a batch technique. Based on the research results of binding capacity, adsorption isotherm, effect of pH value on sorption, and adsorption kinetics experiments, it is shown that the poly(acrylaminophosphonic-carboxyl-hydrazide) chelating fibers have higher binding capacities and good adsorption kinetic properties for heavy metal ions. The sorption of the metal ions on the chelating fibers is strongly dependent on the equilibrium pH value of the solution. The adsorption isotherms of Cu(II) and Cd(II) on the chelating fiber exhibit a Langmuir-type equation. The adsorbed Cu(II), Cd(II), Zn(II), and Pb(II) could be eluted by diluted nitric acid. © 1998 John Wiley & Sons, Inc. J Appl Polym Sci 70: 7–14, 1998     

Adsorption behavior of metal ions by amidoxime chelating resin

The adsorption properties of poly(acrylamidoxime) chelating resin for Cu(II), Cd(II), Hg(II), Zn(II), Pb(II), Cr(III), and U(VI) are investigated by the batch technique. Based on the research results of the binding capacity effect of the pH value on sorption kinetic experiments, it is shown that this resin has higher binding capacity to uranyl ions, fast kinetics, and very good selectivity from binary metal ion mixtures with Cu(II) and Pb(II). The uranyl ion sorption strongly depends on the pH value of the solution. The highest value of 99% is at pH 5, but at pH 1 there is no retention. The adsorbed UO can be eluted by sulfuric acid and sodium carbonate. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 77: 1994–1999, 2000     

Experimental design and batch experiments for optimization of Cr(VI) removal from aqueous solutions by hydrous cerium oxide nanoparticles

Hydrous cerium oxide (HCO) was synthesized by intercalation of solutions of cerium(III) nitrate and sodium hydroxide and evaluated as an adsorbent for the removal of hexavalent chromium from aqueous solutions. Simple batch experiments and a 2⁵ factorial experimental design were employed to screen the variables affecting Cr(VI) removal efficiency. The effects of the process variables; solution pH, initial Cr(VI) concentration, temperature, adsorbent dose and ionic strength were examined. Using the experimental results, a linear mathematical model representing the influence of the different variables and their interactions was obtained. Analysis of variance (ANOVA) demonstrated that Cr(VI) adsorption significantly increases with decreased solution pH, initial concentration and amount of adsorbent used (dose), but slightly decreased with an increase in temperature and ionic strength. The optimization study indicates 99% as the maximum removal at pH 2, 20 °C, 1.923 mM of metal concentration and a sorbent dose of 4 g/dm³. At these optimal conditions, Langmuir, Freundlich and Redlich–Peterson isotherm models were obtained. The maximum adsorption capacity of Cr(VI) adsorbed by HCO was 0.828 mmol/g, calculated by the Langmuir isotherm model. Desorption of chromium indicated that the HCO adsorbent can be regenerated using NaOH solution 0.1 M (up to 85%). The adsorption interactions between the surface sites of HCO and the Cr(VI) ions were found to be a combined effect of both anion exchange and surface complexation with the formation of an inner-sphere complex.     

Hexafunctional poly(propylene glycol) based hydrogels for the removal of heavy metal ions

Two types of degradable poly(propylene glycol) (PPG) hydrogels that are suitable for the absorption of heavy metals have been presented. The PPG‐O‐P(O)Cl₂ fragments obtained by treating hexafunctional PPG with phosphorous oxychloride (POCl₃) react with 1,3‐propanediamine (PDA; Gel‐1 ) or PDA together with 1,2‐ethanedithiol ( Gel‐2 ), to yield cross‐linked and water‐swellable hydrogels in a one‐pot method. This protocol for the fabrication of PPG hydrogels exhibits promising advantages over prior methods including a short reaction time, mass‐production, easy separation, and high yield. A series of heavy metal ions were employed to test the adsorptive properties of the hydrogels. Gel‐2 shows better adsorption capacity than Gel‐1 for all the metal ions and the metal ions adsorption efficiency of the two types of hydrogels is in the order of Fe(III) > Pb(II) > Cd(II) > Zn(II) > Cu(II) > Ni(II) > Co(II) > Hg(II). The amounts of metal ions adsorbed increases with metal ion concentration and hydrogel dosage, but decreases with temperature. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40610.