Synthesis and characterization of calix[4]arene‐containing polyimides

Three types of amino‐functionalized calixarenes, i.e. the diaminocalix[4]arenes 5,17‐diaminomethyl‐25,26,27,28‐tetrapropoxycalix[4]arene, 25,27‐diaminoethoxy‐26,28‐dihydroxycalix[4]arene and 5,11,17,23‐tetra‐tert‐butyl‐25,27‐diaminoethoxy‐26,28‐dihydroxycalix[4]arene, were synthesized and incorporated as comonomers into the backbones of aromatic polyimides. As a first step, polyimide precursors (poly(amic acid)s) were prepared by condensation reaction of diamine with dianhydride at the stoichiometric ratio. The diamine component was composed of synthesized diaminocalix[4]arene and commercial 4,4′‐oxydianiline combined in various molar ratios. The dianhydride used was 4,4′‐oxydiphthalic anhydride. The poly(amic acid)s were characterized using intrinsic viscosity measurements and their chemical composition was determined using ¹H NMR spectroscopy. The precursors were then transformed into the polyimides using a thermal treatment. Thermal and dynamic mechanical behaviour, wide‐angle X‐ray diffraction and solubility of the resulting polyimide films in selected solvents were evaluated. The structure–property relationship of the novel types of synthesized polyimides is discussed in terms of the calixarene monomer used and the fraction of it incorporated into the polymer backbone. Copyright © 2010 Society of Chemical Industry     

Novel linear molecular aggregation tethered by hydrogen-Bonded interaction within the crystalline calix[4]arene derivatives

Single crystals of two calix[4]arene derivatives, that is, 5,11,17,23-tetra-tert-butyl- 25,27-bis[2-[N-(3-methoxy-4-methoxy-benzylidene)-amino]ethoxy]-26,28- dihydroxy calix[4]arene (1) and 5,11,17,23-tetra-tert-butyl-25,27-bis[2-[3- pyridine carbonyl-amino]ethoxy]-26,28-dihydroxy calix[4]arene (2), were prepared and their crystal structures have been determined by X-ray crystallographic study. As compared with calix[4]arene derivative 1 possessing CN functional group, compound 2 bearing the NH group could form not only intermolecular hydrogen bonds between the hydrogen atom in NH group and the oxygen atom in CO of an adjacent calix[4]arene molecule, but also intramolecular hydrogen bonds between the N—H⋯OC moieties in solid state, giving a rare linear molecular aggregation.     

Thermal Behaviors of Bisazocalix[4]arene Derivatives

In this article, calix[4]arene (4) was prepared by debutylation and hydrolyses reacting from 25,27-dibenzoyl-26,28-dihydroxy-5,11,17,23-tetra(tert-butyl)calix[4]arene (2). Azocalix[4]arenes (6a-c) were coupled by linking 4-methoxy, 4-ethyl, and 4-nitroaniline to calix[4]arene (4) through a diazo-coupling reaction. Thermal behavior characteristics and decomposition routes of 25,26,27,28-tetrahydroxy-11,23-di(tert-butyl)-5,17-(p-substitue phenyl)azocalix[4]arene (6a-c) were investigated in air atmosphere by means of thermogravimetry (TG), differential thermogravimetry (DTG), and differential thermal analysis (DTA) analyses. It was found that the decomposition of all compounds complete with two exothermic stages which corresponded to removal of substitute groups (methoxy-, ethyl-, nitro-) and second stage rest of structure decomposition.     

芘冠醚双功能化杯[4]芳烃的合成与表征

以杯[4]芳烃为原料,经碱催化合成了26,28-双(1-乙酰基芘)-5,11,17,23-四叔丁基杯[4]-冠-6,产物结构经IR、1HNMR和元素分析表征。该衍生物为锥形结构。     

6,7-甲氧基香豆素冠醚双功能化杯【4】芳烃的合成与表征

以对叔丁基杯[4]芳烃为原料,经碱催化两步合成了26,28-二（6,7-二甲氧基香豆素-4-亚甲基）-5,11,17,23-四叔丁基杯[4]芳烃-25,27-冠-6,产物经IR、^1H NMR表征和元素分析表征,该衍生物为锥形结构并与设计思想一致。     

杯[4]芳烃咪唑盐的微波合成及在氟化反应中的应用

以杯[4]芳烃为起始原料,首先制得中间体杯[4]芳烃双溴代烷基衍生物,然后经微波辐射和阴离子交换,共得9种杯[4]芳烃咪唑盐衍生物,化合物的结构与构象经元素分析、IR、1HNMR、19FNMR、31PNMR表征.研究了它们在对氯硝基苯氟化反应中的催化性能以及对K+的萃取性能.结果表明,这9种化合物在氟化反应中的催化效果良好,对氟硝基苯的收率为80.89％～92.67％;同时化合物对K+具有较好的萃取效果,其中以化合物25,27-二[4-(3-甲基咪唑)乙氧基]-26,28-二羟基-5,11,17,23-四叔丁基杯[4]芳烃六氟磷酸盐的萃取效果最好,萃取率可达75.45％.     

Synthesis of Various Calix[4]arene Derivatives with Mercaptoalkyl Chains and Their Application in Removing Cr(VI) from Aqueous Solution

Four different mercaptoalkyl-substituted calixarene derivatives (5,11,17,23-tetra-tert-butyl-25,27-bis(3-mercaptopropoxyl)-26,28-dihydroxycalix[4]arene, 25,27-bis(3-mercaptopropoxyl)-26,28-dihydroxycalix[4]arene, 25,27-bis(5-mercaptopentanoxyl)-26,28-dihydroxycalix[4]arene and 5,17-di-tert-butyl-11,23-di-carboxyl-26,28-bis(3-mercaptopropoxyl)-25,27-di-hydroxycalix[4]arene) were synthesized. Their structures were characterized by Fourier transform infrared spectroscopy (FTIR), ¹H and ¹³C NMR spectroscopy, and elemental analysis techniques. Moreover, their extraction capabilities at different parameters such as pH, shaking speed, and shaking time were examined toward dichromate ions. Results implied that all mercaptoalkyl-substituted calixarene derivatives showed an extraction capability toward dichromate anion while the carboxyl-functionalized calixarene-marcapto-alkyl derivative exhibited the highest extraction capability.     

蒽醌冠醚双功能化杯[4]芳烃的合成与表征

以对叔丁基杯[4]芳烃为原料,经碱催化两步合成了26,28-双（2-亚甲基蒽醌）-5,11,17,23-四叔丁基杯[4]-25,27-冠-6。产物经IR、1HNMR表征和元素分析表征,该衍生物为锥形结构并与设计思想一致。     

Synthesis of Calix[4]arene-Based Thiourea Derivatives for Extraction of Toxic Dichromate and Arsenate Ions

In the environment, the presence of toxic oxyanions such as Cr(VI) and As(V), especially in drinking water, creates serious hazards to human health. For efficient and selective detection of these species; novel calix[4]arene-based thiourea derivatives which obtained using p-tert-butylcalix[4]arene as starting material have been prepared from m-aniline or o-aniline or o-aminophenol in moderate yield. The structures of all new synthesized compounds obtained from these reactions were determined by using FTIR, ¹H, and ¹³C NMR spectroscopy. The complexing properties of calix[4]arene-based thiourea derivatives have been studied towards the As(V) and Cr(VI). It was found that calix[4]arene-based thiourea derivative 5,11,17,23-tetra-tert-butyl-25,27-bis(o-amino-phenylthioureido propoxy)-26,28-hydroxycalix[4]arene is an effective extractant for carrying HCr₂O₇^2? anions.     

Molecular Reinforcement of Transparent Materials With Acrylamide‐Modified Calix[4]arene as a Crosslinker

The synthesis of 5,11,17,23‐amino‐25,26,27,28‐propoxycalix[4]arene (calix[4]amine, 4 ) starting from 5,11,17,23‐nitro‐25,26,27,28‐propoxy‐calix[4]arene ( 3 ) via microwave‐assisted transfer hydrogenation is reported. Furthermore, the calix[4]amine ( 4 ) is functionalized with an acrylamide moiety. The swelling behavior in water, the influence on the glass transition temperature, and the shear modulus of a crosslinked N,N‐dimethylacrylamide (NDA) polymer with 5,11,17,23‐acrylamido‐25,26,27,28‐propoxycalix[4]arene ( 5 ) and EGDMA, respectively, are investigated.

     

Selective Extraction of Fe3+ Cation by Calixarene-Based Cyclic Ligands

Abstract

The selective liquid-liquid extraction of Fe³⁺ cation from the aqueous phase to the organic phase was carried out by using p-tert-butylcalix[4]arene [L₁], ca-lix[4]arene [L₂], p-nitro-calix[4]arene [L₃], calix[4]arene p-sulfonic acid [L₄], p-(diethylamino)methylcalixt4]arene [L₅], tetramethyl-p-tert-butylcalix[4]arene tet-raketone [L₆], 25,27-dimethyl-26,28-dihydroxy-p-tert-butylcalix[4]arene diketone [L₇], calix[4]arene-bearing dioxime group on the lower rim [L₈], and a monooxime [L₉]. The effect of varying pH upon the extraction ability of calixarenes substituted with electron-donating and electron-withdrawing groups at their p-position was examined. Observed results were compared with those found for unsubstituted calix[4]arene.     

Synthesis and absorption spectra of some novel hetaryldisazocalix[4]arene derivatives

In this study, a convenient method for the synthesis of thirteen novel disazo dyes containing 25,26,27‐tribenzoyloxy‐28‐hydroxycalix[4]arene have been described. 5,11,17,23‐Tetra‐tert‐butyl‐25,26,27,28‐tetrahydroxycalix[4]arene, 25,26,27,28‐tetrahydroxycalix[4]arene and 25,26,27‐tribenzoyloxy‐28‐hydroxycalix[4]arene were synthesised based on previously published literature. 2‐Arylhdrazone‐3‐ketiminobutyronitriles were synthesised and reacted with hydrazine hydrate to afford the corresponding 5‐amino‐4‐arylazo‐3‐methyl‐1H‐pyrazoles. Thirteen novel hetaryldisazocalix[4]arene derivatives were achieved by diazotisation of 5‐amino‐4‐arylazo‐3‐methyl‐1H‐pyrazoles using nitrosylsulphuric acid, coupled with 25,26,27‐tribenzoyloxy‐28‐hydroxycalix[4]arene. The obtained hetaryldisazocalix[4]arene dyes were characterised based on Fourier Transform–infrared, proton nuclear magnetic resonance and mass spectroscopic techniques, as well as elemental analysis. The solvatochromic behaviour of these dyes in various solvents was examined. Acid‐base effects on the visible absorption maxima of the dyes were also reported.     

杯芳烃衍生物修饰电极的电化学性能研究

采用5,11,17,23-四叔丁基-25,27-二羟基-26,28-二(乙氧羰基甲氧基)杯[4]芳烃(酯-杯[4]芳烃)-PVC膜修饰玻碳电极,研究了其对Pb2+的电化学行为。研究表明:该修饰电极在碱性条件中为不可氧化过程,在酸性条件下具有良好的电化学活性,对Pb2+具有很高的响应,在3.65×10-6～4.83×10-3mol.L-1范围内线性扫描溶出伏安峰电流与Pb2+浓度具有良好的线性关系,检测限为1.28×10-6mol.L-1。     

Calix[4]arene‐tetranitrone as crosslinker in dental composite materials

The synthesis of a functionalized calix[4]arene bearing 1,3‐dipolaric nitrone groups ( 5 ) has been carried out. The reaction of N‐methylhydroxylamine or N‐propylhydroxylamine with the carbonyl group of 5,11,7,23‐tetraformyl‐25,26,27,28‐tetraalkoxycalix[4]arene leads to calix[4]arenes bearing a nitrone function at each of the four para‐positions. Via 1,3‐dipolar cyclo‐addition of acrylic acid methyl ester with the nitrone functions of 5 , subsequently an upper rim‐substituted tetraisoxalidinecalix[4]arene is quantitatively synthesized. Further, the minimization of shrinkage of a dental filling depending on the amount of calix[4]arene‐tetranitrone is discussed. Copyright © 2011 Society of Chemical Industry     

Synthesis and evaluation of extraction ability of calix[4]-crown-6 cone conformer and its oligomeric analogue

The synthesis of the cone conformers of 5,11,17,23-tetra-tert-butyl-25,27-bis[(4-nitrobenzyloxy)-26,28-dihydroxy]-calix[4]-arene (2), 5,11,17,23-tetra-tert-butyl-25,27-bis[(4-nitrobenzyloxy)]calix[4]arene-crown-6 (3) and 5,11,17,23-tetra-tert-butyl-25,27-bis[(4-aminobenzyloxy)]calix[4]arene-crown-6 (4) containing polymerizable side arms, along with their oligomeric analogue 5, is reported. Extraction studies with monomers 3 and 4 and the oligomer 5 show no difference in their extraction behavior and selectivity, whereas, ionophore 2 is a poor extractant for alkali metal cations. These observations suggest that, substitution of side arms on the lower rim of calix moiety can enhance the calix[4]-crown-6 cone conformers function to extract alkali metal cations in two phase extraction systems.     

Voltammetric characterization of selective potassium ion transfer across micro-water/1,2-dichloroethane interface facilitated by a novel calix[4]arene derivative

In this study, transfer reactions of alkali and alkaline-earth metal ions across a micro-water/1,2-dichloroethane (1,2-DCE) interface facilitated by a novel calix[4]arene derivative, 5,11,17,23-tetra-tert-butyl-25,27-bis(2′amino-methylpyridine)-26,28-dihydroxy calix[4]arene (APHC4), were investigated by cyclic and differential pulse voltammetry techniques. Well-defined voltammetric behavior was obtained only for K⁺ ion among the used metal ions. The electrochemical data were used to determine the stoichiometry and the appropriate association constant of the occurring complex between K⁺ ion and APHC4. The obtained steady-state voltammograms indicated that the facilitated transfer process occurs with a TIC/TID mechanism according to 1:1 stoichiometry. The logarithm of the association constant () of K(APHC4)⁺ complex in the DCE phase was calculated to be 6.32. Also, the availability of the facilitated transfer for the design of an amperometric screening sensor for K⁺ ion was evaluated in the range of 50–500 μmol dm⁻³.     

A useful approach toward the synthesis and metal extractions with polymer appended thioalkyl calix[4]arenes

This article describes a convenient method for the synthesis of two new polymeric resins via nucleophilic substitution reactions involving 5,11,17,23-tetrakis[(propylthio)methyl]-25,26,27,28-tetrahydroxycalix[4]arene 4, and 5,11,17,23-tetrakis[(methylthio)methyl]-25,26,27,28-tetrahydroxycalix[4]arene 6, as precursors with Merrifield's resin. The extraction studies were made using both liquid-liquid extraction and solid-liquid batchwise sorption procedures. The calix[4]arene based polymeric resins have high extraction ability toward metal cations and Na₂Cr₂O₇ as compared to their monomeric precursors.     

Syntheses of inherently chiral monosulfinyltrithiacalix[4]arenes by the oxidation of one of the bridging sulfurs of a tetrathiacalix[4]arene fixed in the 1,3-alternate conformation

A new synthetic strategy for the construction of an inherently chiral, sulfur-bridged calix[4]arene molecular framework was presented by oxidation of one of the four epithio bonds of a tetrathiacalix[4]arene derivative of 1,3-alternate conformation: Tetra(carboxymethyl) ether of p-tert-butyltetrathiacalix[4]arene of 1,3-alternate conformation ( 7 ) was converted to the tetra(l-menthoxycarbonylmethyl) ether ( 8 ). Oxidation of the tetra l-menthyl ester 8 by treatment with NaBO₃ (1.1 molar equiv.) afforded a pair of diastereomers of the monosulfinyl derivatives ( 9 ) in 58% yield, which were readily separable by silica-gel column chromatography. Removal of the l-menthyl moieties followed by methyl esterification gave enantiomerically pure samples of inherently chiral (-)- and (+)-monosulfinyltrithiacalix[4]arene derivatives ((-) -10 and (+) -10 ) in 62 and 56% yield, respectively.     

杯芳烃／聚丙烯共混体系耐热氧性能的研究

合成了对叔丁基杯[4]、杯[6]、杯[8]芳烃,并用热重法和烘箱老化评价了共混体系的耐热氧性能。结果表明,杯芳烃能明显提高聚丙烯的耐热氧性能,其耐热氧能力为：对叔丁基杯[6]芳烃＞对叔丁基杯[4]＜2,6－二叔丁基－4－甲基苯酚。     

Characterization of polypyrrole/azocalix[4]arene salts: Electrical properties and thermal stability

Polypyrrole (PPy) was doped with the azocalix[4]arene [(5,11,17,23‐tetrakis[(p‐carboxyphenyl)azo]25,26,27,28‐tetrahydroxycalix[4]arene)] host species. PPy/azocalix[4]arene salts were characterized by FTIR, TGA, SEM, X‐ray diffraction, and conductivity measurements. The properties of PPy were investigated in the presence of azocalix[4]arene host species. The conductivity of PPy increased in the presence of azocalix[4]arene. TGA results indicated that the PPy/azocalix[4]arene salts have higher thermal stability than PPy. It was observed from SEM analysis that the particle diameter of PPy decreased with increasing content of azocalix[4]arene. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010