A quantitative evaluation of the structure and properties of the methyl ester of divinyl ether - maleic anhydride 1:2 copolymer

The methyl ester of divinyl ether—maleic anhydride 1:2 copolymer (DME) has been used as a molecular probe to identify the structure of DIVEMA (divinyl ether—maleic anhydride 1:2 copolymer). Solution light scattering, gel permeation chromatography, and intrinsic viscosity measurements have shown that tetrahydrofuran at 30°C is a theta solvent for DME, and that DME has a random coil conformation with possible long chain branching at higher molecular weights. Determination of the characteristic ratio of DME required identification of its molecular structure. Molecular model studies revealed that the bulky methyl ester groups cause much more steric hindrance in the generally accepted tetrahydropyran structure of DME than in an alternative tetrahydrofuran structure. This observation, together with the polymer solution measurements, indicates the latter structure is more in accord with experimental data, suggesting that both DME and the parent DIVEMA contain tetrahydrofuran in their structures.     

Synthesis of a novel linear water‐soluble β‐cyclodextrin polymer

A novel linear water‐soluble β‐cyclodextrin polymer has been prepared by grafting β‐cyclodextrin on poly[(methyl vinyl ether)‐alt‐(maleic anhydride)]. First, lithium hydride was used to obtain the mono‐alkoxide β‐CD. Grafting of β‐CD derivatives to the polymer backbone was then carried out by an esterification method. Using this method, polymers containing various amounts of β‐CD were synthesized. The resulting grafted polymers were characterized by two complementary methods, ¹H NMR and IR spectroscopy. The first was used to calculate the degree of substitution for the low amounts of β‐CD. The second method was very useful to evaluate the degree of substitution and the molar ratio of CD especially for high amounts of grafting. Our results indicate good agreement between both methods for intermediate rates. Copyright © 2004 Society of Chemical Industry     

Associations between a hydrophobically modified,degradable, poly(malic acid) and a β‐cyclodextrin polymer in solution

A new associating system has been elaborated from mixing a degradable polymer, poly(β‐malic acid‐co‐β‐ethyladamantyl malate), and a β‐cyclodextrin polymer in aqueous solution. Viscosity and dynamic light scattering measurements have been made on solutions of the single copolyester and of mixtures of both polymers. Studies on copolyesters with different percentages of hydrophobic groups (0–7.5%) show that a small proportion of the chains (less than 5% in weight) are aggregated in large structures (100 nm) which dominate the scattering intensity. The mixtures exhibit slow diffusive relaxation modes which correlate with a large viscosity enhancement at low concentration. These effects, which depend sensitively on pH, are attributed to the presence of polydisperse complexes of copolyester and β‐cyclodextrin polymer. The influence of pH, ionic strength, medium composition, and concentration were examined on the mixture of copolymers. It was found that the association properties are controlled by the net charge on the amphiphilic copolyester. © 2001 Society of Chemical Industry     

Preparation and characterization of a novel responsive hydrogel with a β‐cyclodextrin‐based macromonomer

Based on a combination of poly(N‐isopropylacrylamide), which could respond to an external temperature, and β‐cyclodextrin (β‐CD), which could form a molecular inclusion complex, a novel hydrogel, having both thermal and pH sensitivities and containing β‐CD and N‐isopropylacrylamide (NIPA) segments, was synthesized. For the incorporation of β‐CD into the polymer network, a macromonomer was prepared first by the reaction of a β‐CD‐based polymer with maleic anhydride in dimethylformamide and then by copolymerization with NIPA in an aqueous solution. Elemental analysis, IR spectroscopy, differential scanning calorimetry, and swelling measurements were employed for the characterization of the hydrogel chain structure and its physical properties. With methyl orange as a model compound in inclusion tests, it was found that the hydrogel not only possessed a remarkable supramolecular inclusion ability (with respect to that of the small molecule cyclodextrin) but also could sensitively respond to various external stimuli, including the temperature, pH, and ionic strength. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 361–367, 2003     

Silver‐ and gold‐labeled colloidal and crosslinked glycopolymers based on glycyl glycosynthons and maleic anhydride copolymers for lectin binding

A simple, convenient, and inexpensive technique for preparing lectin‐specific nanogold‐ and silver‐labeled colloidal and crosslinked neoglycoconjugates, based on maleic anhydride copolymers, was developed. Water‐soluble nanogold‐ and silver‐labeled glyconanoparticles were obtained in two steps: (1) introduction of free N‐acetyl‐D‐glucosamine or glycyl‐spacered glycosynthons—β‐N‐glycyl‐N‐acetyl‐D‐glucosamine or β‐N‐glycyl‐lactose—into poly(ethylene‐alt‐maleic anhydride) or poly(N‐vinylpyrrolidone‐alt‐maleic anhydride) and (2) labeling in situ the thus‐obtained glycopolymers with gold or silver nanoparticles. Lectin sorbents were synthesized from glycyl‐spacered glycosynthons and spherical, granulated, crosslinked maleic anhydride copolymers in an aqueous system without any condensing agents. Thus, maleic anhydride copolymer was used solely, without any preliminary modification of the polymer, as a matrix for crosslinking, for specific ligand binding, and as metal nanoparticles as a stabilizing cover. The resulting colloidal gold or silver glyconanoparticles were used as lectin sensors (in a dot‐blot analysis of lectins) and as crosslinked neoglycoconjugates for lectin sorption studies. The corresponding gold‐ or silver‐labeled water‐soluble glyconanoparticles and crosslinked neoglycoconjugates manifested high activity and specificity in all tests with a series of β‐D‐GlcNAc‐specific and β‐D‐Gal‐specific lectins. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 44718.     

Heptakis(2,3‐di‐O‐methyl‐6‐O‐sulfopropyl)‐β‐cyclodextrin: A Genuine Supramolecular Carrier for Aqueous Organometallic Catalysis

The behavior of heptakis(2,3‐di‐O‐methyl‐6‐O‐sulfopropyl)‐β‐cyclodextrin as inverse phase transfer catalyst in biphasic Tsuji–Trost and hydroformylation reactions has been investigated. In terms of activity, this methylated sulfopropyl ether β‐cyclodextrin is much more efficient than the randomly methylated β‐cyclodextrin, which was the most active cyclodextrin known to date. From a selectivity point of view, the intrinsic properties of the catalytic system are fully preserved in the presence of this cyclodextrin as the chemo‐ or regioselectivity was found to be identical to that observed without a mass transfer promoter in the hydroformylation reaction. The efficiency of this cyclodextrin was attributed to its high surface activity and to the absence of interactions with the catalytically active species and the water‐soluble phosphane used to dissolve the organometallic catalyst in the aqueous phase.     

Preparation of novel amphiphilic copolymer microspheres and their drug‐release and glucose‐sensitive properties

A novel amphiphilic copolymer was prepared by the copolymerization of N‐acryloyl‐3‐aminophenylboronic acid with β‐cyclodextrin containing maleic anhydride. The copolymer was fully characterized with ¹³C‐NMR, ¹H‐NMR, IR, and scanning electron microscopy. The self‐assembling mechanism of the copolymer in H₂O–CH₃OH cosolvents was studied. Gliclazide as a model drug was loaded inside the copolymer microspheres, and the drug‐release behavior of the microspheres was studied. The results of in vitro oscillating release tests indicated that the microspheres responded to glucose rapidly in 30 min, and the microspheres exhibited self‐regulated on–off release behavior four to six times in 6 h between the solution with 3 g/L glucose and the medium without glucose; this met the clinical requirements of multidrug delivery. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Synthesis and characterization of grafting β‐cyclodextrin with chitosan

Two new adsorbents [β‐cyclodextrin–chitosan (β‐CD–CTS) and β‐cyclodextrin‐6–chitosan (β‐CD‐6‐CTS)] were synthesized by the reaction of β‐cyclodextrin (β‐CD) with epoxy‐activated chitosan (CTS) and the sulfonation of the C‐6 hydroxyl group of β‐cyclodextrin with CTS, respectively. Their structures were confirmed by IR spectral analysis and X‐ray diffraction analysis, and their apparent amount of grafting was determined by ultraviolet spectroscopy. The adsorption properties of β‐CD‐CTS and β‐CD‐6‐CTS for p‐dihydroxybenzene were studied. The experimental results showed that the two new adsorbents exerted adsorption on the carefully chosen target. The highest saturated capacity of p‐dihydroxybenzene of β‐CD‐CTS and β‐CD‐6‐CTS were 51.68 and 46.41 mg/g, respectively. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 94: 860–864, 2004     

Immobilization of a functionalized poly(ethylene glycol) onto β‐cyclodextrin‐coated surfaces by formation of inclusion complexes: Application to the coupling of proteins

The aim of this study was the immobilization of COOH‐modified poly(ethylene glycol) (PEG) layers onto β‐cyclodextrin‐coated surfaces by formation of inclusion complexes, in view of biosensors applications. To this end, PEGs with one phenyladamantyl and one carboxylic end group (Ad‐PEG‐COOH) were prepared according to a three‐step procedure. After modification of PEG with 4‐toluenesulfonylchloride, the reaction of the tosyl intermediate with the alcoholate of 4‐(1‐adamantyl)‐phenol was carried out in tetrahydrofuran to avoid the formation of by‐products. Then, it was shown by high performance liquid chromatography that the association between β‐cyclodextrin cavities and Ad‐PEG‐COOH polymers was not hindered by the presence of the COOH group. Last, the Ad‐PEG‐COOH polymer was immobilized onto β‐cyclodextrin‐coated gold surfaces by formation of inclusion complexes. The immobilization was performed in water, at room temperature, with a rapid kinetics. After activation of COOH groups with N‐hydroxysuccinimide, β‐lactoglobulin was coupled to the biocompatible PEG layer. Functionalization of the gold surface with β‐cyclodextrin cavities, immobilization of Ad‐PEG‐COOH onto the surface, and coupling of the protein to the reactive PEG layer were followed in real time by surface plasmon resonance imaging system. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 2362–2370, 2006     

Novel colloidal nanofiber electrolytes from PVA‐organoclay/poly(MA‐alt‐MVE), and their NaOH and Ag‐carrying polymer complexes

Novel multifunctional polymer nanofiber electrolytes with covalence crosslinked structures from various solution blends of reactive intercalated poly(vinyl alcohol)/octadecylamine montmorillonite (as a matrix polymer), poly(maleic anhydride‐alt‐methyl vinyl ether) (as a partner polymer) and their NaOH‐absorbing and Ag‐carrying polymer complexes were fabricated via electrospinning. Chemical, physical, morphological, and electrical properties of nanofiber structures were investigated by FTIR, XRD, SEM, and electrical analysis methods. Ag precursors in fiber composites significantly improved phase separation processing, fiber morphologies, diameter distributions, and electrical properties of the fibers. In situ generation of Ag nanoparticles and their distribution on nanofiber surfaces during fiber formation occurred via complex formation between silver cations and electronegative functional groups from both matrix and partner polymers as stabilizing/reducing agents. Electrical resistance and conductivity strongly depended on matrix/partner polymer ratios and absorption time of NaOH solution on nanofibers. Addition of NaOH changed the electrical properties of fiber structures from almost dielectric state to excellent conductivity form. The fabricated unique nanofiber electrolytes are promising candidates for applications in power and fuel cell nanotechnology, electrochemical, and bioengineering processes as reactive semiconductive platforms. POLYM. ENG. SCI., 56:204–213, 2016. © 2015 Society of Plastics Engineers     

Preparation and characterization of bottle‐brush polymer via host−guest self‐assembly between β‐cyclodextrin and adamantane

Supramolecular assemblies with a bottle‐brush structure are obtained by inclusion complexation between β‐cyclodextrin and adamantane. β‐cyclodextrin‐modified chitosan is synthesized via the aldimine condensation reaction between β‐cyclodextrin monoaldehyde and chitosan as the host. The guest is prepared through the esterification reaction between methoxypoly(ethylene glycol) and 1‐adamantanecarboxylic acid chloride. The supramolecular assemblies are formed through the inclusion of adamantane‐modified methoxypoly(ethylene glycol) into the β‐cyclodextrin cavity on the chitosan chain. Fourier transform infrared and ¹H NMR spectra were used to prove that the host, guest and assemblies were successfully obtained. UV?visible spectra were employed to confirm the formation of assemblies. Furthermore, the size of the particles in the assembled solution, the change before and after self‐assembly, and the effect of the addition of competitive molecules were studied by dynamic light scattering measurements. The results indicate that supramolecular assemblies have formed successfully which might be used to realize the biomimetic structure of the articular cartilage proteoglycan. © 2014 Society of Chemical Industry     

Nonisothermal crystallization and melting behavior of β‐nucleated isotactic polypropylene and polyamide 66 blends

A highly novel nano‐CaCO₃ supported β‐nucleating agent was employed to prepare β‐nucleated isotactic polypropylene (iPP) blend with polyamide (PA) 66, β‐nucleated iPP/PA66 blend, as well as its compatibilized version with maleic anhydride grafted PP (PP‐g‐MA), maleic anhydride grafted polyethylene‐octene (POE‐g‐MA), and polyethylene‐vinyl acetate (EVA‐g‐MA), respectively. Nonisothermal crystallization behavior and melting characteristics of β‐nucleated iPP and its blends were investigated by differential scanning calorimeter and wide angle X‐ray diffraction. Experimental results indicated that the crystallization temperature (T) of PP shifts to high temperature in the non‐nucleated PP/PA66 blends because of the α‐nucleating effect of PA66. T of PP and the β‐crystal content (K_β) in β‐nucleated iPP/PA66 blends not only depended on the PA66 content, but also on the compatibilizer type. Addition of PP‐g‐MA and POE‐g‐MA into β‐nucleated iPP/PA66 blends increased the β‐crystal content; however, EVA‐g‐MA is not benefit for the formation of β‐crystal in the compatibilized β‐nucleated iPP/PA66 blend. It can be relative to the different interfacial interactions between PP and compatibilizers. The nonisothermal crystallization kinetics of PP in the blends was evaluated by Mo's method. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Molecular recognition: polymers comprising isomeric meta‐/para‐isopropylphenol and N‐isopropylacrylamide and their supramolecular complexes with methylated β‐cyclodextrin

We describe the molecular recognition of polymeric attached isomers meta‐isopropylphenol and para‐isopropylphenol, respectively, in a copolymer of N‐isopropylacrylamide (NIPAAm) by use of randomly methylated β‐cyclodextrin (RAMEB‐CD). The acrylic monomers 4‐ and 3‐isopropylphenylacrylate were synthesized and radically copolymerized with NIPAAm yielding the corresponding polymers. The supramolecular structures resulting from complexation with RAMEB‐CD were characterized using dynamic light scattering, turbidity, NMR spectroscopy and isothermal titration. We found differences in binding constant, mean coil size and cloud point as a result of different complexations of the mentioned polymer‐bound isomers with RAMEB‐CD. Copyright © 2012 Society of Chemical Industry     

Synthesis and reactive features of a terpolymer: Poly(N‐vinyl‐2‐pyrrolidone‐co‐vinyl acetate‐co‐glycidyl methacrylate)

A polyvinyl pyrrolidone terpolymer system is described that can be chemically cross‐linked at moderate, 70–100°C, temperatures. The system has significant potential for development of durable long‐lasting pyrrolidone coatings in a wide range of applications, particularly in water filtration membrane construction where leaching is an unresolved, serious problem. The synthesis of the terpolymer, poly(N‐vinyl‐2‐pyrrolidone‐co‐vinyl acetate‐co‐glycidyl methacrylate), by free radical polymerization is described. The reactive features of this terpolymer are presented in the context of acidic anhydride curing. In a polar aprotic solvent, the terpolymer is reacted with poly(methyl vinyl ether‐co‐maleic acid) and cured thermally. Key aspects of the terpolymer synthesis and the acid anhydride cross‐linking reaction using DSC, rheology, FTIR, and a small molecule model system to study the cross‐linking chemistry are presented. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Poly(methyl vinyl ether‐alt‐maleic anhydride) functionalized with 3‐aminophenylboronic acid: A new boronic acid polymer for sensing diols in neutral water

Amidation of poly(methyl vinyl ether‐alt‐maleic anhydride) with 3‐aminophenylboronic acid was used to prepare a new boronic acid polymer. The binding of catechol dye, Alizarin Red S to the polymer obtained resulted in getting a stable, colored sensor which was used to establish association constants with different diols in competitive assay. The binding of different diols was readily detected by color change and absorbance values measured at 450 nm were used to calculate the association constants. The polymer obtained formed high‐affinity complexes with ribonucleosides, particularly cytidine and uridine. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40778.     

Synthesis and morphology of carboxylated polyether‐block‐polydimethylsiloxane and the supermolecule self‐assembled from it

In this research, hydroxyl‐terminated polyether‐block‐polydimethylsiloxane (PESO) was synthesized as an intermediate through the hydrosilylation of Si? H‐terminated polydimethylsiloxane with allyl polyoxyethylene polyoxypropylene ether. Then, carboxylated polyether‐block‐polydimethylsiloxane (CPES) was prepared through the reaction of maleic anhydride with PESO. First, the chemical structures of the synthesized polysiloxanes were characterized with IR and ¹H‐NMR spectroscopy, and then the film morphology of CPES and the supermolecule self‐assembled from CPES and N‐β‐aminoethyl‐γ‐aminopropyl polydimethylsiloxane (ASO‐1) was investigated by atomic force microscopy in detail. Experimental results indicated that the superpolysiloxane that self‐assembled from CPES and ASO‐1 showed a film morphology very different from those of CPES and ASO‐1. There were not only many small, bright dots but also some big and marvelous dots circled by dots on the film surface. The morphology of dots circled by dots was estimated to result from aggregates of CPES micelles adsorbed onto the curled ASO‐1 molecule interface. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Investigation on β‐polypropylene/PP‐g‐MAH/ surface‐treated calcium carbonate composites

β‐Polypropylene composites containing calcium carbonate treated by titanate coupling agent (T‐CaCO₃) and maleic anhydride grafted PP (PP‐g‐MAH) were prepared by melt compounding. The crystallization, morphology and mechanical properties of the composites were investigated by means of differential scanning calorimetry, wide‐angle X‐ray diffraction, polarized light microscopy, scanning electron microscopy and mechanical tests. It is found that both T‐CaCO₃ and NT‐C are able to induce the formation of β‐phase, and NT‐C greatly increases the β content and decreases the spherulitic size of PP. PP‐g‐MAH facilitates the formation of β‐form PP and improves the compatibility between T‐CaCO₃ and PP. Izod notched impact strength of β‐PP/T‐CaCO₃ composite is higher than that of PP/T‐CaCO₃ composite, indicating the synergistic toughening effect of T‐CaCO₃ and β‐PP. Incorporation of PP‐g‐MAH into β‐PP/T‐CaCO₃ composite further increases the content of β‐crystal PP and improves the impact strength and tensile strength when T‐CaCO₃ concentration is below 5 wt%. The nonisothermal crystallization kinetics of β‐PP composites is well described by Jeziorny's and Mo's methods. It is found that NT‐C and T‐CaCO₃ accelerate the crystallization rate of PP but the influence of PP‐g‐MAH on crystallization rate of β‐PP composite is marginal. POLYM. COMPOS., 2012. © 2012 Society of Plastics Engineers     

Effect of poly(styrene‐co‐maleic anhydride) imidization on the miscibility and phase‐separation temperatures of poly(styrene‐co‐maleic anhydride)/poly(vinyl methyl ether) and poly(styrene‐co‐maleic anhydride)/ poly(methyl methacrylate) blends

The objective of this work was to study the miscibility and phase‐separation temperatures of poly(styrene‐co‐maleic anhydride) (SMA)/poly(vinyl methyl ether) (PVME) and SMA/poly(methyl methacrylate) (PMMA) blends with differential scanning calorimetry and small‐angle light scattering techniques. We focused on the effect of SMA partial imidization with aniline on the miscibility and phase‐separation temperatures of these blends. The SMA imidization reaction led to a partially imidized styrene N‐phenyl succinimide copolymer (SMI) with a degree of conversion of 49% and a decomposition temperature higher than that of SMA by about 20°C. We observed that both SMI/PVME and SMI/PMMA blends had lower critical solution temperature behavior. The imidization of SMA increased the phase‐separation temperature of the SMA/PVME blend and decreased that of the SMA/PMMA blend. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Altering associations of doxorubicin‐loaded alginate esters micelles in presence of β‐cyclodextrin

The aim of this article was to evaluate the effects of β‐cyclodextrin (β‐CD) on doxorubicin (DOX)‐loaded alginate esters (SA‐C₁₆) micelles (DOX/SA‐C₁₆) in aqueous solution. DOX was physically loaded into SA‐C₁₆ micelles by an o/w emulsion method with a substantial encapsulation efficiency (EE) level (36.12%), and DOX/SA‐C₁₆ was distributed in size diameters of approximately 254 nm. SA‐C₁₆ as carriers for the DOX can lead to the formation of associative networks in aqueous solutions between the hydrophobic tails of SA‐C₁₆ and DOX, and the dried morphology of DOX/SA‐C₁₆ aggregate was spherical shape. Addition of β‐CD to the system of DOX/SA‐C₁₆ facilitated decoupling of these associations via inclusion complex formation between β‐CD cavities and the polymer hydrophobic tails that produced the release of DOX immediately, and the EE level was dropped to 0.08%, and at the same time the size distribution of aggregate was increased to about 413 nm, moreover, the aggregate was relatively large and becoming irregular spherical shape. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40702.     

Phase morphology and interfacial characteristics of polycarbonate/acrylonitrile‐ethylene‐propylene‐diene‐styrene blends compatibilized by styrene‐maleic anhydride copolymers

Blends of polycarbonate (PC) and acrylonitrile ‐ ethylene‐propylene‐diene‐styrene (AES) were reactive compatibilized by styrene‐maleic anhydride copolymers (SMA). The changes in phase morphology and interfacial characteristics of the blends as a function of maleic anhydride content of SMA and the concentration of compatibilizer have been systematic studied. The occurrence of reaction between the terminal hydroxyl groups of PC and the maleic anhydride (MA) of compatibilizer was confirmed by fourier transform infrared (FTIR) spectroscopy. A glass transition temperature (T_g) with an intermediate value between T_g(AES) and T_g(PC) was found on differential scanning calorimeter (DSC) curves of PC/AES blends compatibilized with SMA contains high levels of MA. Furthermore, at lower compatibilizer content, increase of the compatibilizer level in blends result in decreasing gap between two T_gs corresponding to the constituent polymers. Small angle X‐ray scattering (SAXS) test results indicated that compatibilizer concentration for the minimum of blend interface layer's thickness was exactly the same as it was when compatibilized PC/AES blend exhibited optimal compatibility in DSC test. The observed morphological changes were consistent well with the DSC and SAXS test results. A new mechanism of interfacial structural development was proposed to explain unusual phenomena of SMA compatibilized PC/AES blends. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42103.