Preparation of thermosensitive and superabsorbent polymer hydrogels from trialkyl‐4‐vinylbenzyl phosphonium chloride‐N‐isopropylacrylamide‐N,N′‐methylenebisacrylamide copolymers and their properties

Thermosensitive and superabsorbent polymer hydrogels were synthesized by copolymerization of three kinds of tri‐n‐alkyl vinylbenzyl phosphonium chlorides (TRVB) with different lengths of alkyl chains, N‐isopropylacrylamide (NIPAAm), and N,N′‐methylenebisacrylamide (MBAAm). The water‐absorption ability and antibacterial activity of the hydrogels against Staphylococcus aureus (S. aureus) were investigated. The water content of TRVB–NIPAAm–MBAAm copolymers decreased with increasing temperature and increased with increasing phosphonium groups in the copolymers, while it decreased with increasing chain length of the alkyl groups in the phosphonium groups as well as with an increasing degree of crosslinking in the copolymers. The TRVB–NIPAAm–MBAAm copolymers with a higher TRVB content in the copolymers exhibited higher antibacterial activity against S. aureus, but decreased with increasing chain length of alkyl groups in phosphonium groups. The TRVB–NIPAAm–MBAAm copolymers exhibited the highest antibacterial activity at 30°C against S. aureus in deionized water. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 79: 115–124, 2001     

Thermoreversible hydrogels. VII. Synthesis and swelling behavior of poly(N‐isopropylacrylamide‐co‐3‐methyl‐1‐vinylimidazolium iodide) hydrogels

A series of N‐isopropylacrylamide/3‐methyl‐1‐vinylimidazolium iodide (NIPAAm/MVI) copolymer gels were prepared from the various molar ratios of NIPAAm, cationic monomer MVI, and N,N′‐methylene bisacrylamide (NMBA) in this study. The influence of the amount of MVI in the copolymer gels on the swelling behaviors was investigated in various aqueous saline solutions. Results showed that the swelling ratios (SRs) of copolymer gels were significantly greater than those of NIPAAm homopolymer gels, and the higher the MVI content, the higher the volume phase transition temperature. The SRs for the NIPAAm/MVI copolymer gels decreased with an increase of the salt concentration. In various saline solutions, results showed that the effect of divalent ions on the SR was greater than that of monovalent ions for these hydrogels. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 74: 3242–3253, 1999     

Synthesis and characterization of radio‐opaque thermosensitive poly[N‐isopropylacrylamide‐2,2′‐(ethylenedioxy)bis(ethylamine)‐2,3,5‐triiodobenzamide]

BACKGROUND: In situ gelling polymers, like poly(N‐isopropylacrylamide) (poly(NIPAAm)), have many potential medical applications due to their biocompatibility and thermosensitivity. RESULTS: Radio‐opaque thermosensitive poly(NIPAAm) grafted with 10.7 wt% 2,2′‐(ethylenedioxy)bis(ethylamine)‐2,3,5‐triiodobenzamide was successfully synthesized and characterized. The conjugated polymer showed good visibility with X‐ray fluoroscopy. The polymer had a lower critical solution temperature of 30 °C after conjugation with triiodobenzamide as determined by cloud point determination and a transition peak temperature of 33.3 ± 0.57 °C as determined by differential scanning calorimetry. CONCLUSION: The polymer synthesized was highly visible under X‐rays, based upon the percentage incorporation of triiodobenzamide. After conjugation of the NIPAAm to the triiodobenzamide through a bis(ethylamine) linkage, the resultant polymer retained lower critical solution temperature characteristics in a temperature region that makes it physiologically useful. Copyright © 2009 Society of Chemical Industry     

Thermo‐ and pH‐responsive behaviors of graft copolymer and blend based on chitosan and N‐isopropylacrylamide

Thermo‐ and pH‐sensitive polymers were prepared by graft polymerization or blending of chitosan and poly(N‐isopropylacrylamide) (PNIPAAm). The graft copolymer and blend were characterized by Fourier transform‐infrared, thermogravimetric analysis, X‐ray diffraction measurements, and solubility test. The maximum grafting (%) of chitosan‐g‐(N‐isopropylacrylamide) (NIPAAm) was obtained at the 0.5 M NIPAAm monomer concentration, 2 × 10⁻³ M of ceric ammonium nitrate initiator and 2 h of reaction time at 25°C. The percentage of grafting (%) and the efficiency of grafting (%) gradually increased with the concentration of NIPAAm up to 0.5 M, and then decreased at above 0.5 M NIPAAm concentration due to the increase in the homopolymerization of NIPAAm. Both crosslinked chitosan‐g‐NIPAAm and chitosan/PNIPAAm blend reached an equilibrium state within 30 min. The equilibrium water content of all IPN samples dropped sharply at pH > 6 and temperature > 30°C. In the buffer solutions of various pH and temperature, the chitosan/PNIPAAm blend IPN has a somewhat higher swelling than that of the chitosan‐g‐NIPAAm IPN. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 78: 1381–1391, 2000     

Thermo‐responsive injectable hydrogel system based on poly(N‐isopropylacrylamide‐co‐vinylphosphonic acid). I. Biomineralization and protein delivery

To achieve the injectable hydrogel system in order to improve bone regeneration by locally delivering a protein drug including bone morphogenetic proteins, thermo‐responsive injectable hydrogels composed of N‐isopropylacrylamide (NIPAAm) and vinyl phosphonic acid (VPAc) were prepared. The P(NIPAAm‐co‐VPAc) hydrogels were also biomineralized by urea‐mediation method to create functional polymer hydrogels that deliver the protein drug and mimic the bone extracellular matrix. The loosely cross‐linked P(NIPAAm‐co‐VPAc) hydrogels were pliable and fluid‐like at room temperature and could be injected through a small‐diameter aperture. The lower critical solution temperature (LCST) of P(NIPAAm‐co‐VPAc) hydrogel was influenced by the monomer ratio of NIPAAm/VPAc and the hydrogel with a 96/4 molar ratio of NIPAAm/VPAc exhibited an LCST of ～34.5°C. Water content was influenced by temperature, NIPAAm/VPAc monomer ratio, and biomineralization; however, all hydrogels maintained more than about 77% of the water content even at 37°C. In a cytotoxicity study, the P(NIPAAm‐co‐VPAc) and biomineralized P(NIPAAm‐co‐VPAc) hydrogels did not significantly affect cell viability. The loading content of bovine serum albumin in hydrogel, which was used as a model drug, gradually increased with the amount of VPAc in the hydrogel owing to the ionic interaction between VPAc groups and BSA molecules. In addition, the release behavior of BSA from the P(NIPAAm‐co‐VPAc) hydrogels was mainly influenced by the drug loading content, water content, and biomineralization of the hydrogels. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Influence of pore size and pore shape on thermo‐sensitive properties of poly[(ethylene terephthalate)‐graft‐(N‐isopropylacrylamide)] track membranes

BACKGROUND: The main aim of this work was to prepare poly[(ethylene terephthalate)‐graft‐(N‐isopropylacrylamide)] (PET‐graft‐NIPAAm) track membranes with various pore shapes and pore sizes, and to investigate the influence of pore shape and pore size on the thermo‐sensitive properties of the membranes. The PET‐graft‐NIPAAm track membranes were prepared using UV illumination, chemical etching and γ‐irradiation polymerization. Their thermo‐sensitive properties were investigated using conductimetry. RESULTS: PET track membranes with four kinds of pore shapes and sizes were prepared using chemical etching by changing the UV illumination time. After γ‐irradiation, NIPAAm was grafted into the etched PET track membranes both inside the pores and on the membranes. Conductimetric measurements showed that only membranes with appropriate pore shape and pore size had thermo‐sensitive properties. When the grafting ratio was 5 wt%, membranes with both small double cone‐shaped pores and with very large cylinder‐shaped pores showed no thermo‐sensitive properties. CONCLUSION: Along with the grafting ratio, the pore shape and pore size also have an influence on the thermo‐sensitive properties of PET‐graft‐NIPAAm track membranes. Copyright © 2009 Society of Chemical Industry     

Thermo‐ and pH‐ responsive copolymers: Poly(n‐Isopropylacrylamide‐co‐IAM) copolymers

Poly(N‐isopropylacrylamide) (NIPAAm) is well known as a smart material with good thermal sensitivity and favorable biocompatibility. A series of new smart hydrogels, NIPAAm copolymerized with IAM (itaconamic acid; 4‐amino‐2‐methylene‐4‐oxobutanoic acid), were synthesized through radical solution polymerization in this work. Poly(NIPAAm‐co‐IAM) can respond to the changes of temperature as well as pH value. Such a characteristic is due to the fact that IAM contains not only a hydrophilic acrylic acid moiety but also an acrylamide moiety to be thermal and pH sensitive. The experimental results show that the lower critical solution temperature (LCST) of the copolymer increases as the molar fraction of IAM increases. Moreover, based on the current experimental data, 3 wt % of Poly(NIPAAm‐co‐IAM) aqueous solution in this study exhibits a phase transition temperature (37.8°C) close to the human body temperature in the buffer solution of pH 7 possibly to be useful in drug delivery. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42367.     

Physical properties of poly(vinyl chloride)–grafted N‐isopropylacrylamide graft copolymers and corresponding polyblends

The physical properties of poly(vinyl chloride) (PVC) and poly(N‐isopropylacrylamide) [poly(NIPAAm)] blend systems, and their corresponding graft copolymers such as PVC‐g‐NIPAAm, were investigated in this work. The compatible range for PVC–poly(NIPAAm) blend systems is less than 15 wt % poly(NIPAAm). The water absorbencies for the grafted films increase with increase in graft percentage. The water absorbencies for the blend systems increase with increase in poly(NIPAAm) content within the compatible range for the blends, but the absorbencies decrease when the amount of poly(NIPAAm) is more than the compatible range in the blend system. The tensile strengths for the graft copolymers are larger than the corresponding blends. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 76: 170–178, 2000     

Preparation of alginate/poly(N‐isopropylacrylamide) semi‐interpenetrating and fully interpenetrating polymer network hydrogels with γ‐ray irradiation and their swelling behaviors

Semi‐interpenetrating polymer network (semi‐IPN) and fully interpenetrating polymer network (full‐IPN) hydrogels composed of alginate and poly(N‐isopropylacrylamide) were prepared with γ‐ray irradiation. The semi‐IPN hydrogels were prepared through the irradiation of a mixed solution composed of alginate and N‐isopropylacrylamide (NIPAAm) monomer to simultaneously achieve the polymerization and self‐crosslinking of NIPAAm. The full‐IPN hydrogels were formed through the immersion of the semi‐IPN film in a calcium‐ion solution. The results for the swelling and deswelling behaviors showed that the swelling ratio of semi‐IPN hydrogels was higher than that of full‐IPN hydrogels. A semi‐IPN hydrogel containing more alginate exhibited relatively rapid swelling and deswelling rates, whereas a full‐IPN hydrogel showed an adverse tendency. All the hydrogels with NIPAAm exhibited a change in the swelling ratio around 30–40°C, and full‐IPN hydrogels showed more sensitive and reversible behavior than semi‐IPN hydrogels under a stepwise stimulus. In addition, the swelling ratio of the hydrogels continuously increased with the pH values, and the swelling processes were proven to be repeatable with pH changes. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 4439–4446, 2006     

pH and thermo‐responsive poly(N‐isopropylacrylamide) copolymer grafted to poly(ethylene glycol)

pH and thermo‐responsive graft copolymers are reported where thermo‐responsive poly(N‐isopropylacrylamide) [poly(NIPAAm), poly A ], poly(N‐isopropylacrylamide‐co‐2‐(diethylamino) ethyl methacrylate) [poly(NIPAAm‐co‐DEA), poly B ], and poly(N‐isopropylacrylamide‐co‐methacrylic acid) [poly(NIPAAm‐co‐MAA), poly C ] have been installed to benzaldehyde grafted polyethylene glycol (PEG) back bone following introducing a pH responsive benzoic‐imine bond. All the prepared graft copolymers for PEG‐g‐poly(NIPAAm) [ P‐N1 ], PEG‐g‐poly(NIPAAm‐co‐DEA) [ P‐N2 ], and PEG‐g‐poly(NIPAAm‐co‐MAA) [ P‐N3 ] were characterized by ¹H‐NMR to assure the successful synthesis of the expected polymers. Molecular weight of all synthesized polymers was evaluated following gel permeation chromatography. The lower critical solution temperature of graft copolymers varied significantly when grafted to benzaldehyde containing PEG and after further functionalization of copolymer based poly(NIPAAm). The contact angle experiment showed the changes in hydrophilic/hydrophobic behavior when the polymers were exposed to different pH and temperature. Particle size measurement investigation by dynamic light scattering was performed to rectify thermo and pH responsiveness of all prepared polymers. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Self‐assembled poly(styrene‐co‐N‐isopropylacrylamide) film induced by capillary force

The monodisperse poly(styrene‐co‐N‐isopropylacrylamide) (poly(St‐co‐NIPAAm)) particles prepared by emulsifier‐free emulsion polymerization with microwave irradiation were induced by capillary forces to self‐assemble, and formed the two‐dimensional films on the clean glassware wafer substrates. The morphologies of the two‐dimensional films were characterized by scanning electron microscopy (SEM) and atom force microscopy (AFM). The results showed that monodisperse poly(St‐co‐NIPAAm) particles could form ordered two‐dimensional films by capillary forces. With NIPAAm concentration increasing, there gradually appeared surface undulations or surface defective region on the two‐dimensional films. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 99: 3514–3519, 2006     

Temperature sensitive semi‐IPN microspheres from sodium alginate and N‐isopropylacrylamide for controlled release of 5‐fluorouracil

Semi‐interpenetrating network (IPN) of sodium alginate (NaAlg) and N‐isopropylacrylamide (NIPAAm) microspheres were prepared by water‐in‐oil (w/o) emulsification method. The microspheres were encapsulated with 5‐fluorouracil (5‐FU) and release patterns carried in 7.4 pH at temperatures of 25 and 37°C. The semi‐IPN microspheres were characterized by Fourier transform infrared spectroscopy (FTIR). Differential scanning calorimetry (DSC) and scanning electron microscopic studies were done on the drug‐loaded microspheres to confirm the polymorphism of 5‐FU and surface morphology of microspheres. These results indicated the molecular level dispersion of 5‐FU in the semi‐IPN microspheres. Particle size and size distribution were studied by laser light diffraction technique. Microspheres exhibited release of 5‐FU up to 12 h. The swelling studies were carried in 1.2 and 7.4 pH buffer media at 25 and 37°C. Drug release from NaAlg‐NIPAAm semi‐IPN microspheres at 25 and 37°C confirmed the thermosensitive nature by in vitro dissolution. The micro domains have released in a controlled manner due the presence of NIPAAm in the matrix. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Thermoreversible hydrogels X: Synthesis and swelling behavior of the (N‐isopropylacrylamide‐co‐sodium 2‐acrylamido‐2‐methylpropyl sulfonate) copolymeric hydrogels

A series of thermosensitive hydrogels were prepared from various molar ratios of N‐isopropylacrylamide (NIPAAm) and sodium‐2‐acrylamido‐2‐methylpropyl sulfonate (NaAMPS). Factors such as temperature and initial total monomer concentration and different pH solutions were investigated. Results indicated that the more the NaAMPS content in hydrogel system, the higher the swelling ratio and the gel transition temperature; the higher the initial monomer concentration, the lower the swelling ratio. The result also indicated that the NIPAAm/NaAMPS copolymeric hydrogels had different swelling ratios in various pH environments. The present gels showed a pH‐reversible property between pH 3 and pH 10 and thermoreversibility. The swelling ratios of copolymeric gels were lower in a strong alkaline environment because the gels were screened by counterions. Finally, the drug release behavior of these gels was also investigated in this article. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 77: 1760–1768, 2000     

Thermosensitive nanoparticles prepared from poly(N‐isopropylacrylamide‐acrylamide‐vinilpyrrolidone) and its blend with poly(lactide‐co‐glycolide) for efficient drug delivery system

Temperature‐responsive polymers have become increasingly attractive as carrier for the injectable drug delivery systems. In the present work, we have studied the preparation of poly(N‐isopropylacrylamide‐acrylamide‐vinilpyrrolidone) (NIPAAm‐AAm‐VP terpolymer) nanoparticulated terpolymer and its blend with poly(lactide‐co‐glycolide, PLGA; molar ratio of lactide/glycolid 1/3). Thermosensitive terpolymer, poly(NIPAAm‐AAm‐VP) was prepared by free‐radical polymerization in aqueous solution. The nanoparticles of poly(NIPAAm‐AAm‐VP) and its blend with PLGA containing naltrexone were prepared using the evaporation and w/o emulsion‐solvent evaporation methods, respectively. Nanoparticles prepared from terpolymer‐PLGA blend at low polymer concentration (5%) shows larger particle size (>300 nm) and higher drug content%. Various types of nanoparticles showed a burst release of less than 10% after 24 h . The results suggest that by regulating different variables, desired release profiles of naltrexone can be achieved using a blend of PLGA‐poly(NIPAAm‐AAm‐VP) nanoparticulate system. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Poly(N‐isopropylacrylamide‐co‐poly(ethylene glycol))‐acrylate simultaneously physically and chemically gelling polymer systems

In an effort to create an in situ physically and chemically cross‐linked hydrogel for in vivo applications, N‐isopropylacrylamide (NIPAAm) was copolymerized with poly(ethylene glycol)‐monoacrylate (PEG‐monoacrylate) and then the hydroxyl terminus of the PEG was further modified with acryloyl chloride to form poly(NIPAAm‐co‐PEG) with acrylate terminated pendant groups. In addition to physically gelling with temperature changes, when mixed with a multi‐thiol compound such as pentaerythritol tetrakis 3‐mercaptopropionate (QT) in phosphate buffer saline solution of pH 7.4, this polymer formed a chemical gel via a Michael‐type addition reaction. The chemical gelation time of the polymer was affected by mixing time; swelling of the copolymer solutions was temperature dependant. Because of its unique gelation properties, this material may be better suited for long‐term functional replacement applications than other thermo‐sensitive physical gels. Also, the PEG content of this material may render it more biocompatible than similar HEMA‐based precursors in previous simultaneous chemically and physically gelling materials. With its improved mechanical strength and biocompatibility, this material could potentially be applied as a thermally gelling injectable biomaterial for aneurysm or arteriovenous malformation (AVM) occlusion. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Vesicular and micellar self‐assembly of stimuli‐responsive poly(N‐isopropyl acrylamide‐b‐9‐anthracene methyl methacrylate) amphiphilic diblock copolymers

Dually responsive amphiphilic diblock copolymers consisting of hydrophilic poly(N‐isopropyl acrylamide) [poly(NIPAAm)] and hydrophobic poly(9‐anthracene methyl methacrylate) were synthesized by reversible addition fragmentation chain‐transfer (RAFT) polymerization with 3‐(benzyl sulfanyl thiocarbonyl sulfanyl) propionic acid as a chain‐transfer agent. In the first step, the poly(NIPAAm) chain was grown to make a macro‐RAFT agent, and in the second step, the chain was extended by hydrophobic 9‐anthryl methyl methacrylate to yield amphiphilic poly(N‐isopropyl acrylamide‐b‐9‐anthracene methyl methacrylate) block copolymers. The formation of copolymers with three different hydrophobic block lengths and a fixed hydrophilic block was confirmed from their molecular weights. The self‐assembly of these copolymers was studied through the determination of the lower critical solution temperature and critical micelle concentration of the copolymers in aqueous solution. The self‐assembled block copolymers displayed vesicular morphology in the case of the small hydrophobic chain, but the morphology gradually turned into a micellar type when the hydrophobic chain length was increased. The variations in the length and chemical composition of the blocks allowed the tuning of the block copolymer responsiveness toward both the pH and temperature. The resulting self‐assembled structures underwent thermally induced and pH‐induced morphological transitions from vesicles to micelles and vice versa in aqueous solution. These dually responsive amphiphilic diblock copolymers have potential applications in the encapsulation of both hydrophobic and hydrophilic drug molecules, as evidenced from the dye encapsulation studies. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46474.     

Fast responsive poly(acrylic acid‐co‐N‐isopropyl acrylamide) hydrogels based on new crosslinker

Novel dual temperature‐ and pH‐sensitive poly(acrylic acid‐co‐N‐isopropylacrylamide), AA/NIPAAm, hydrogels were successfully prepared by chemical crosslinking with crosslinkers. Copolymers of AA/NIPAAm were crosslinked in the presence of different mol % of N,N‐methylene bisacrylamide (MBA) and melamine triacrylamide (MAAm) as crosslinkers by bulk radical polymerization. The resultant xerogels were characterized by extracting the soluble fractions and measuring the equilibrium water content. Lower critical solution transition temperatures (LCST) were measured by DSC. The properties of crosslinked AA/NIPAAm series are evaluated in terms of compositional drift of polymerization, heterogeneous crosslinking, and chemical structure of the relevant components. Soluble fractions of the crosslinked networks were reduced by varying the MAAm and MBA concentrations. The influence of environmental conditions such as temperature and pH on the swelling behavior of these polymeric gels was investigated. The swelling behaviors of the resulting gels show pH sensitivity. The prepared MAAm type AA/NIPAAm hydrogels exhibited a more rapid deswelling rate than MBA type AA/NIPAAm hydrogels in ultra pure water in response to abrupt changes from 20°C to 50°C. The results of this study provide valuable information regarding the development of dual stimuli‐sensitive hydrogels with fast responsiveness. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Synthesis and properties of hydrogels of poly(acrylic‐co‐acroloyl β‐cyclodextrin)

Novel acrylic monomers (β‐CD‐A and β‐CD‐6‐EA) containing β‐cyclodextrin (β‐CD) with different extent of substitution were prepared by using dicyclohexylcarbodiimide (DCC) as a condensation agent at room temperature. Two kinds of functional hydrogels were also synthesized by copolymerization of β‐CD‐A and β‐CD‐6‐EA with acrylic acid (AAc) using a redox initiator system in aqueous solution. The nuclear magnetic resonance (¹H NMR), infrared spectroscopy (IR), thermogravimetric analysis (TGA) were employed to character the molecular structures of β‐CD modified monomers and their copolymers. The swelling experiments indicate that the hydrogels with different equilibrium swelling ratio (ESR) possess obvious pH‐sensitivity and distinct dynamic swelling behavior. Using an anti‐cancer drug, chlorambucil (CHL), able to form complexes with β‐CD in water, as a model compound, the controlled drug release behaviors of these hydrogels were investigated. The release behavior of CHL from two kinds of hydrogels synthesized reveals that the release rate of CHL can be effectively controlled by pH values, cross‐linking density, and β‐CD content. In addition, it is found that the β‐CD with the proper frame and concentration can increase release efficiency of CHL from the hydrogels. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Synthesis and swelling behavior of thermosensitive IPN hydrogels based on sodium acrylate and N‐isopropyl acrylamide by a two‐step method

A series of interpenetrating polymer network (IPN) hydrogels having higher swelling ratio (SR) and thermosensitivity were synthesized from sodium acrylate (SA) and N‐isopropyl acrylamide (NIPAAm) by a two‐step method. A series of the porous poly(sodium acrylate ‐co‐1‐vinyl–2‐pyrrolidone) [poly(SA‐co‐VP)], (SV), hydrogels were prepared from acrylic acid having 90% degree of neutralization and VP monomer in the first step. The second step is to immerse the SV dried gels into the NIPAAm solution containing initiator, accelerator, and crosslinker to absorb NIPAAm solution and then polymerized to form the poly(SA‐co‐VP)/poly(NIPAAm) IPN hydrogels (SVN). The effect of the different molar ratios of SA/VP and the content of NIPAAm on the swelling behavior and physical properties of the SVN hydrogels was investigated. Results showed that the SVN hydrogels displayed an obviously thermoreversible behavior when the temperature turns across the critical gel transition temperature (CGTT) of poly(NIPAAm) hydrogel. The pore diameter distributions inside the hydrogel also indicated that the pore sizes inside the SVN hydrogels were smaller than those inside the SV hydrogels. At the same time, the more proportion of SA was added into the hydrogel, the larger pore diameter of the SV hydrogel was formed. The results also showed that the SR decreased with an increase of the VP content in the SV hydrogel and more obviously decreased in the SVN hydrogels. The SVN networks also showed stronger shear moduli than SV hydrogels. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Controlled radical polymerization of N‐isopropylacrylamide initiated by photofunctional 2‐(N,N‐diethyldithiocarbamyl)isobutyric acid sodium salt in aqueous medium

Photopolymerizations of N‐isopropylacrylamide (NIPAAm) were carried out in water, initiated by 2‐(N,N‐diethyldithiocarbamyl)isobutyric acid sodium salt (DTCA‐Na) as water‐soluble initiator under UV irradiation. The first‐order time‐conversion plots showed slowly decreasing slopes indicating a slow decrease of the active radical concentration. The number‐average molecular weight (M_n) of the obtained poly(N‐isopropylacrylamide) (PNIPAAm) increased in direct proportion, roughly, to monomer conversion. Until ca. 60% of conversion, the polydispersity was relatively narrow (ca. 1.6). 1‐Vinyl‐2‐pyrrolidone (VP) could also be polymerized in living fashion with such PNIPAAm precursor as a macroinitiator, because PNIPAAm exhibited dithiocarbamate (DC) groups at terminal ends. It was concluded that the polymerization of NIPAAm proceeded via a controlled radical mechanism in the range ～60% of conversion. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 91: 3233–3238, 2004