Synthesis and properties of polyamides derived from 4,6‐bis(4‐chloroformylphenylthio)pyrimidine and 3,6‐bis(4‐chloroformylphenylthio)pyridazine

Two kinds of monomers containing thioether units 4,6‐bis(4‐chloroformylphenylthio)pyrimidine (BPPM‐DC) and 3,6‐bis(4‐chloroformylphenylthio)pyridazine (BPPD‐DC) were synthesized by two steps and were reacted with diamine‐containing thioether (?S–) and sulfone units to prepare a kind of polyamide containing heterocycles and high contents of thioether groups. These polyamides had good optical properties, including an optical transmittance of the aromatic polyamide film at 450 nm that was higher than 87%. Additionally, the pyridazine, pyrimidine and the large quantity of thioether units provided the polymers with high refractive indices of 1.722–1.732 and low birefringences of 0.004–0.006. These polyamides were also found to have good thermal properties. They showed improved solubility in polar aprotic solvents and could form tough films with a tensile strength of 79.2–112.3 MPa and a storage modulus of 1.4–2.4 GPa (at 200 °C).© 2013 Society of Chemical Industry     

Facile synthesis of processable aromatic polyamides containing thioether units

Aromatic polyamides containing thioether units were synthesized by interfacial polycondensation of 4,4′‐thiodibenzoyl chloride (or 4,4′‐bis(4‐chloroformylphenylthio)benzene) with aromatic diamines containing a nitrile unit. Their structure was established using ¹H NMR and Fourier transform infrared spectroscopy. The inherent viscosities of the polyamides prepared with optimum synthesis conditions were in the range 0.71–0.84 dL g^?1. These polyamides showed excellent thermal properties with glass transition temperatures of 210.5–219.6 °C, melting temperatures of 313.8–315.0 °C and initial degradation temperatures of 440–459 °C. They could be processed by melting due to their relatively wide processing window. Their tensile strengths were 71.3–79.1 MPa, water absorption was 0.17–0.22 wt%, and melt flowability was in the range 64.5 to 315.2 Pa s and 68.5 to 422.3 Pa s at different shear rates. At the same time, they were soluble in aprotic solvents such as N‐methyl‐2‐pyrrolidone, dimethylformamide and dimethylsulfoxide. The results suggest that these aromatic polyamides containing thioether units represent a promising type of heat‐resistant and processable engineering plastic. © 2012 Society of Chemical Industry     

Synthesis and properties of novel soluble polyamides containing both fluorene or xanthene cardo moieties and fluorinated phenoxy pendant groups

A series of novel aromatic polyamides containing both fluorene or xanthene cardo moieties and fluorinated phenoxy pendant groups were synthesized from two fluorinated isophthaloyl chlorides and four diamines containing cardo groups by the low‐temperature solution polycondensation in N,N‐dimethylacetamide (DMAc). The obtained polymers were characterized by different physicochemical techniques. All the polymers were amorphous and readily soluble in many organic solvents such as DMAc, N‐methyl‐2‐pyrrolidinone, N,N‐dimethylformamide, dimethyl sulfoxide, pyridine, and tetrahydrofuran at room temperature. The new fluorinated polyamides had high thermal stability with the glass transition temperatures of 237–259°C, the temperatures at 5% weight loss of 437–476°C in nitrogen. All the polymers formed transparent, strong, and flexible films with tensile strengths of 70.6–87.5 MPa, tensile moduli of 2.23–2.78 GPa, and elongations at break of 5.8–8.7%. These polyamide films had high optical transparency with an ultraviolet–visible absorption cutoff wavelength of 352–368 nm, low dielectric constants of 3.24–3.45 (1 MHz), and lower water absorptions of 1.06–1.43%. POLYM. ENG. SCI., 57:1234–1241, 2017. © 2017 Society of Plastics Engineers     

Polyamide derived from 4,4′-thiobis(methylene)dibenzoyl chloride and aliphatic diamine: interfacial synthesis and characterization

A series of processable semi-aromatic polyamides containing thioether and methylene units were synthesized through the reaction of 4,4′-thiobis(methylene)dibenzoyl chloride and aliphatic diamine by the method of interfacial polycondensation. These polyamides had excellent thermal properties with glass transition temperatures (T _g) of 104.3–130.6 °C, melting temperatures (T _m) of 300.3–303.8 °C, and initial degradation temperatures (T _d) of 405.2–410.3 °C. They had wider processing windows than traditional semi-aromatic polyamides (such as PA6T can not be processed by melting) and can be processed by melting method. They had better tensile strengths of 57.6–64.1 MPa, low-temperature mechanical properties, low water absorption of 0.19–0.27 %, low dielectric constants of 3.11–3.95 at 100 kHz, and better melt flowability properties of 232–60.7, 301.9–78.8, and 423.1–83.6 Pa s under a shear rate ranging from 20 to 1,170 s^?1, respectively. In addition, these polyamides showed good corrosion resistance, they did not dissolve in solvents such as NMP, DMSO, hydrochloric acid (6 mol/l), and solution of NaOH (1 mol/l) and so on.     

Synthesis of high refractive index polyamides containing thioether unit

Two kinds of aromatic dibenzoyl chloride monomer containing thioether unit 4,4′-Bis(4-chloroformylphenylthio)benzophenone (BP-DC) and 4,4′-thiodibenzoyl chloride (T-DC) were synthesized with two steps, which was reacted with diamine monomer containing thioether and amide unit to prepare a new kind of polyamide containing high quantity thio-ether group. The intrinsic viscosity of the polyamides was 0.76–0.90 dl/g obtained with optimum synthesis conditions. The polymers were found to have good optical properties: the optical transmittance of the aromatic polyamide film at 450 nm is higher than 80%, meantime the high quantity thio-ether unit provided the polymer with a high refractive index ranging from 1.691 to 1.696 and low birefringence of 0.007–0.008. At the same time the polymers had excellent thermal performance with glass transition temperature (T_g) of 226 °C–278 °C, initial degradation temperature (T_d) of 427 °C–439 °C. They showed improved solubility in polar aprotic solvents.     

High‐optical transparency and low‐dielectric constant of new organosoluble polyamides containing trifluoromethyl and xanthene groups

A series of fluorinated polyamides was prepared directly by low‐temperature polycondensation of a new cardo diacid chloride, 9,9‐bis[4‐(4‐chloroformylphenoxy)phenyl]xanthene (BCPX), with various diamines containing trifluoromethyl substituents in N,N‐dimethylacetamide (DMAc). Almost all polyamides showed excellent solubility in amide‐type solvents such as DMAc and could also be dissolved in pyridine, m‐cresol, and tetrahydrofuran. These polymers had inherent viscosities between 0.77 and 1.31 dL g^?1, and their weight‐average molecular weights and number‐average molecular weights were in the range of 69,000–102,000 and 41,000–59,000, respectively. The resulting polymers showed glass transition temperatures between 240–258°C and 10% weight loss temperatures ranging from 484°C to 517°C and 410°C to 456°C in nitrogen and air, respectively, and char yields at 800°C in nitrogen higher than 55%. All polymers were amorphous and could be cast into transparent, light‐colored, and flexible films with tensile strengths of 81–100 MPa, elongations at break of 8–12%, and tensile modulus of 1.6–2.1 GPa. These polymers had low‐dielectric constants of 3.34–3.65 (100 kHz), low‐moisture absorption in the range of 0.76–1.91%, and high transparency with an ultraviolet–visible absorption cut‐off wavelength in the 322–340 nm range. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Metal adhesive properties of polyamides having the 2,3‐bis(1,4‐phenylene)quinoxalinediyl structure

Polyamides were synthesized by interfacial polycondensation of 2,3‐bis(4‐chloroformylphenyl)quinoxaline (BCFPQ) and several aliphatic diamines using a phase transfer catalyst, and their adhesive property for stainless steel was investigated. The inherent viscosity of the obtained polyamides ranged from 0.37 to 1.24 dL g⁻¹. The glass transition temperatures of the polyamides ranged between 154 and 201°C, and their thermal decomposition temperatures were above 450°C. The polyamides were soluble in several organic solvents, including m‐cresol, N‐methyl‐2‐pyrrolidone (NMP), and formic acid. The adhesive property for stainless steel was examined by a standard tensile test. One member of the series, polyamide P8, derived from BCFPQ and 1,8‐octanediamine, displayed high tensile strength with values of 232 kgf cm⁻² at 20°C, 173 kgf cm⁻² at 120°C, and 137 kgf cm⁻² at 180°C. Thus, the tensile strength of P8 decreased at 180°C, but the decrease was much smaller than that of an epoxy resin in wide use as a metal adhesive. Heat distortion temperature, measured by thermal mechanical analysis, of P8 was 191°C. This suggested that P8 possessed high thermal resistance in metal adhesives. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 74: 1366–1370, 1999     

Synthesis and characterization of aromatic–aliphatic polyamides

A new monomer, 2,5‐bis(4‐carboxy methylene phenyl)‐3,4‐diphenyl thiophene (V) has been synthesized and characterized by physical and spectroscopic methods. A series of eight aromatic–aliphatic polyamides was prepared from the (V) and different aromatic diamines using Yamazaki's direct phosphorylation reaction. The polyamides were characterized by IR spectroscopy, viscosity measurements, and thermal analysis. An excellent yield of these polyamides was obtained, with inherent viscosities in the range of 0.28 to 0.67 dL/g, and the polyamide were readily soluble in aprotic polar solvents such as N‐methyl‐2‐pyrrolidone, N‐N‐dimethyl acetamide, dimethyl sulphoxide, and so forth. Polyamides could be cast into transparent and flexible films. They had glass‐transition temperatures of 225–273°C. When evaluated by thermogravimetry, thermal analysis of the polyamides showed no weight loss below 311°C, and the char yield in air at 900°C was 55%–67%. The structure–property correlation among these polyamides is also discussed. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 79: 566–571, 2001     

Synthesis and properties of new polyamides based on a hydroxyethyl cinnamide extended from 3,5‐diaminobenzoic acid

A series of new aromatic polyamides containing cinnamide pendent units were prepared from 2′‐(cinnamide)ethyl‐3,5‐diaminobenzoate and various aromatic dicarboxylic acids by the direct polycondensation reaction, with triphenyl phosphite and pyridine as condensing agents. The polyamides were characterized by ¹H NMR, IR, and UV spectroscopy, and gel permeation chromatography. Their thermal stability was studied by thermogravimetric analysis in air, and differential scanning calorimetry. These polymers were readily soluble in polar aprotic solvents and can be cast from their solutions in flexible and tough films. Glass transition temperatures (T_gs) of these polyamides were observed in the range of 225–245°C. Their inherent viscosities varied from 0.77 to 1.12 dL/g that corresponded to weight–average and number–average molecular weights of 39,000–72,700 and 18,800–29,000, respectively. These polymers can be photochemically crosslinked. The photochemical aspects were revealed by means of UV–vis and IR analyses onto thin films. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 2013–2020, 2007     

Synthesis and properties of novel polyamides containing sulfone‐ether linkages and xanthene cardo groups

In order to obtain polyamides with enhanced solubility and processability, as well as good mechanical and thermal properties, several novel polyamides containing sulfone‐ether linkages and xanthene cardo groups based on a new diamine monomer, 9,9‐bis[4‐(4‐aminophenoxy)phenyl]xanthene (BAPX), were investigated. The BAPX monomer was synthesized via a two‐step process consisting of an aromatic nucleophilic substitution reaction of readily available 4‐chloronitrobenzene with 9,9‐bis(4‐hydroxyphenyl)xanthene in the presence of potassium carbonate in N,N‐dimethylformamide, followed by catalytic reduction with hydrazine and Pd/C. Four novel aromatic polyamides containing sulfone‐ether linkages and xanthene cardo groups with inherent viscosities between 0.98 and 1.22 dL g^?1 were prepared by low‐temperature polycondensation of BAPX with 4,4′‐sulfonyldibenzoyl chloride, 4,4′‐[sulfonyl‐bis(4‐phenyleneoxy)]dibenzoyl chloride, 3,3′‐[sulfonyl‐bis(4‐phenyleneoxy)]dibenzoyl chloride and 4,4′‐[sulfonyl‐bis(2,6‐dimethyl‐1,4‐phenyleneoxy)]dibenzoyl chloride in N,N‐dimethylacetamide (DMAc) solution containing pyridine. All these new polyamides were amorphous and readily soluble in various polar solvents such as DMAc and N‐methylpyrrolidone. These polymers showed relatively high glass transition temperatures in the range 238–298 °C, almost no weight loss up to 450 °C in air or nitrogen atmosphere, decomposition temperatures at 10% weight loss ranging from 472 to 523 °C and 465 to 512 °C in nitrogen and air, respectively, and char yields at 800 °C in nitrogen higher than 50 wt%. Transparent, flexible and tough films of these polymers cast from DMAc solution exhibited tensile strengths ranging from 78 to 87 MPa, elongations at break from 9 to 13% and initial moduli from 1.7 to 2.2 GPa. Primary characterization of these novel polyamides shows that they might serve as new candidates for processable high‐performance polymeric materials. Copyright © 2010 Society of Chemical Industry     

Solution‐processable and electroactive aromatic polyamides with 3,5‐bis(trifluoromethyl)triphenylamine moiety

New fluorine‐containing, triphenylamine‐based diamine and dicarboxylic acid monomers, namely 3,5‐bis(trifluoromethyl)‐4′,4″‐diaminotriphenylamine and 3,5‐bis(trifluoromethyl)‐4′,4″‐dicarboxytriphenylamine, were synthesized and polymerized with commercially available aromatic dicarboxylic acids and diamines, respectively, leading to two series of aromatic polyamides, 5a–h and 7a–e . Most of the polyamides were amorphous and readily soluble in many common organic solvents and could be solution‐cast into transparent, flexible and strong films with good mechanical properties. The polyamides had useful levels of thermal stability associated with high glass transition temperatures of 273–305 °C and 10% weight‐loss temperatures in excess of 500 °C. Cyclic voltammograms of films of polymers 5a–h on indium–tin oxide‐coated glass substrates exhibited reversible oxidation redox couples with E_1/2 around 1.15 V versus Ag/AgCl in tetrabutylammonium perchlorate/acetonitrile solution, accompanied by a color change from colorless neutral state to reddish brown oxidized state. The 7 series polymers displayed a higher oxidation potential and less electrochemical stability as compared to the 5 series analogues. © 2017 Society of Chemical Industry     

Facile preparation and characterization of soluble aramid

It remains a problem to prepare cost‐effective aramid with good solubility via a simple method since the commercialization of aromatic polyamides such as Kevlar and Nomex by DuPont in 1960s. Herein, we report the facile preparation and properties of an aromatic polyamide copolymerized by 2,6‐naphthalene dichloride (26N‐COCl), 4,4′‐oxydianiline, and m‐phenylenediamine. The synthetic route is very facile and cost‐effective. The modified aramids possess excellent comprehensive properties. The polymers are soluble in some organics. Their thermal stabilities are excellent, with 5% weight loss temperatures (T_d,5%'s) in air higher than 460 °C and glass transition temperatures (T_g's) higher than 280 °C. These polymers are easily processed into films, fibers, and tubes. The products exhibit high strength. For example, the films have excellent mechanical strength, with a tensile strength up to 139 MPa, a tensile modulus up to 3.45 GPa, and an elongation of 11%. The films are also transparent and fluorescent. The overall properties are better than those of the commercial Nomex. The facilely prepared aramids with good solubility are very promising for commercial use. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46341.     

Synthesis and properties of novel soluble fluorinated aromatic polyamides containing 4-benzoyl-2,3,5,6-tetrafluorophenoxy pendant groups

A new diaroyl chloride monomer, 5-(4-benzoyl-2,3,5,6-tetrafluorophenoxy)isophthaloyl dichloride (BTFPIPC), was prepared in a three-step synthesis. Six novel aromatic polyamides containing 4-benzoyl-2,3,5,6-tetrafluorophenoxy pendant groups were synthesized by low temperature polycondensation of BTFPIPC with six aromatic diamines in N,N-dimethylacetamide (DMAc). All these new polymers are amorphous and readily soluble in various dipolar solvents such as DMAc, N-methyl-2-pyrrolidinone (NMP), N,N-dimethylformamide (DMF), and dimethyl sulfoxide (DMSO) at room temperature. These polymers showed glass transition temperatures between 212 and 243 °C and 5% weight loss temperatures ranging from 439 °C to 456 °C. These polyamides could be cast into transparent, flexible and strong films from DMAc solution with tensile strengths of 73.5–85.4 MPa, tensile moduli of 2.06–2.72 GPa, and elongations at break of 6.4–9.3%. These new polyamide films exhibited low dielectric constants of 3.26–3.57 (1 MHz), lower water uptakes in the range of 1.27–2.28%, and excellent transparency with an ultraviolet-visible absorption cut-off wavelength in the 326–373 nm range. Primary characterization of these new polyamides shows that they might serve as new candidates for processable high-performance polymeric materials.     

The effect of furan molecular units on the glass transition and thermal degradation temperatures of polyamides

Interfacial polymerization is used to prepare biobased furan polyamides from the carbohydrate‐derived monomer, 2,5‐furan dicarboxylic acid, aromatic diamines, and varying chain length aliphatic diamines. The molecular weights of the furan polyamides variations range 10,000–70,000 g/mol. These biobased polyamides have improved solubility relative to petroleum‐derived polyamides affording enhanced processability options. The glass transition temperatures (T_g) of the biobased furan polyamides are higher than that of aliphatic analogs, but lower than phenyl‐aromatic analogs. The T_g for these furan polyamides are as high as 280 °C. Also, the furan polyamide glass transition temperatures increase with decreasing aliphatic diamine chain length similar to results exemplified in petroleum‐based nylons. Group contribution parameters are determined for furans to enable simple prediction of the glass transition temperature and decomposition temperature of furan polyamides. The molar glass transition function for the furan is calculated to be 27.6 ± 1.5 K kg/mol. Thermal analysis measurements of the biobased furan polyamides have maximum thermal degradation temperatures at 350 °C or higher, similar to that of aliphatic polyamides when scaled with the number average molecular weight. The molar decomposition temperature functions are determined to be 37 K kg/mol for furans bonded to aliphatic units and 42 K kg/mol for furans bonded to phenyl units. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 45514.     

Synthesis and properties of novel soluble aromatic polyamides containing 4-aryl-2,6-diphenylpyridine moieties and pendant fluorinated phenoxy groups

Three diamine monomers containing pyridine groups were prepared via the modified Chichibabin reaction of aromatic aldehydes with 4′-nitroacetophenone, followed by reduction with hydrazine hydrate in the presence of Pd/C. Novel aromatic polyamides containing 4-aryl-2,6-diphenylpyridine moieties and pendant fluorinated phenoxy groups were synthesized from these diamines and two fluorinated isophthaloyl dichlorides by the low temperature solution polycondensation in N,N-dimethylacetamide (DMAc). All the polymers are amorphous and readily soluble in strong polar organic solvents such as DMAc, N-methyl-2-pyrrolidinone (NMP), N,N-dimethylformamide (DMF), and dimethyl sulfoxide (DMSO) at room temperature. The resulting polymers showed glass transition temperatures between 270 and 314 °C and 5 % weight loss temperatures ranging from 442 °C to 475 °C, and char yields at 800 °C higher than 53 % in nitrogen. These polyamides could be cast into transparent, flexible and strong films from DMAc solution with tensile strengths of 72.5–87.3 MPa, tensile moduli of 2.35–2.87 GPa, and elongations at break of 5.3–9.5 %. The polyamide films exhibited low dielectric constants of 3.21–3.54 (1 MHz), low water uptakes in the range of 1.17–1.38 %, and high transparency with an ultraviolet-visible absorption cut-off wavelength in the 380–391 nm range.     

Synthesis and properties of novel soluble polychloro substituted aromatic polyamides

A novel monomer of tetrachloroterephthaloyl chloride (TCTPC) was prepared by the chlorination of terephthaloyl chloride catalyzed by ferric chloride at 175–180°C for 10 h, and confirmed by FTIR, MS, and elemental analysis. A series of new polychloro substituted polyamides with inherent viscosities of 1.17–1.28 dL/g have been prepared from TCTPC with various aromatic diamines. All the polyamides were amorphous and readily soluble in polar solvents such as NMP, DMAc, DMF, and DMSO at room temperature, and could afford flexible and tough films via solution casting. The cast films exhibited good mechanical properties with tensile strengths of 83.6–106.8 MPa, elongations at breakage of 3.9–7.1%, and tensile modulus of 2.28–3.98 GPa. These polyamide films also exhibited good thermal stability with the glass transition temperature of 250–284°C, the temperature at 5% weight loss of 470–504°C and high char yields of 57.8–59.7% in nitrogen. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Synthesis,characterization, and properties of novel fluorine containing aromatic polyamides

A series of novel fluorine containing aromatic polyamides were synthesized by the direct polycondensation of various fluorine containing aromatic diamines and commercially available 5‐t‐butyl isophthalic acid. These polyamides have good solubility in several organic solvents such as dimethylformamide, N,N‐dimethylacetamide, 1‐Methyl‐2‐pyrrolidone, dimethyl sulfoxide, and tetrahydrofuran. The synthesized polymers exhibited inherent viscosities up to 0.93 dL/g and M_w up to 1,52,000 with PDI of 2.49. The polyamides exhibited good thermal stability up to 489°C for 10% weight loss in nitrogen and high glass transition temperature up to 273°C. Dynamic mechanical analysis showed a very good retention of storage modulus up to the glass transition temperature. The tan δ peak value at 1 Hz was used to calculate the T_g and these values are in good agreement with differential scanning calorimetry data. The polyamide films were flexible with tensile strength up to 72 MPa, elongations at break up to 14%, and modulus of elasticity up to 1.39 GPa depending on the exact repeating unit structure. X‐ray diffraction measurements indicate that these polyamides are semicrystalline. Rheology study showed same trend of melt viscosity behavior with different shear rate for all polymers. Water absorption study indicates the hydrophobic nature of the polymer. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

A simple and efficient way to synthesize optically active polyamides by solution polycondensation of di‐O‐methyl‐L‐tartaryl chloride with diamines

A series of optically active polyamides containing di‐O‐methyl‐L ‐tartaryl moieties in the main chain were synthesized by polycondensation of di‐O‐methyl‐L ‐tartaryl chloride 5 with diamines and characterized by gel permeation chromatography, UV–vis, circular dichroism (CD), IR, and NMR spectroscopies. The polycondensation reaction could be carried out under mild conditions and the reaction time was short (2–3 h). The key monomer 5 prepared from L ‐tartaric acid via esterification, etherification, hydrolysis, and chlorination was easily purified by vacuum sublimation. These polyamides with number average molecular weights ranging from 14,000 to 35,000, displayed large optical activity in dimethyl sulfoxide solution, and their specific optical rotations oscillated between 87.2° and 210.7° depending on the structures of the diamines. The glass transition temperatures of these polyamides were in the range of 106–191°C, and the 10% mass loss occurred at temperature above 300°C. The polyamides derived from aromatic diamines exhibited higher T_g and thermal stability than those derived from aliphatic diamines. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Synthesis and properties of novel aromatic poly(ester–amide)s derived from 1,5‐bis(3‐aminobenzoyloxy)naphthalene and aromatic dicarboxylic acids

A new naphthalene‐ring‐containing bis(ester–amine), 1,5‐bis(3‐aminobenzoyloxy)naphthalene, was prepared from the condensation of 1,5‐dihydroxynaphthalene with 3‐nitrobenzoyl chloride followed by catalytic hydrogenation. A series of novel naphthalene‐containing poly(ester–amide)s was synthesized by direct phosphorylation polyamidation from this bis(ester–amine) with various aromatic dicarboxylic acids. The polymers were produced in high yields and had moderate inherent viscosities of 0.47–0.81 dL g^?1. The poly(ester–amide) derived from terephthalic acid was semicrystalline and showed less solubility. Other polymers derived from less rigid and symmetrical diacids were amorphous and readily soluble in most polar organic solvents and could be solution‐cast into transparent, flexible and tough films with good mechanical properties. The amorphous poly(ester–amide)s displayed well‐defined glass transition temperatures of between 179 and 225 °C from differential scanning calorimetry and softening temperatures of between 178 and 211 °C from thermomechanical analysis. These poly(ester–amide)s did not show significant decomposition below 400 °C in nitrogen or air. Copyright © 2004 Society of Chemical Industry     

Synthesis of high performance polyamides utilizing copper‐catalyzed amidation of a dibromoarene with different diamides

A series of diphenylquinoxaline‐containing polyamides were prepared from the condensation polymerization of 2,3‐bis (4‐bromophenyl) quinoxaline (DBQ) with various primary and secondary diamides via copper‐catalyzed amidation reaction. The polyamides were characterized with FTIR, NMR, GPC, differential scanning calorimeter, and thermo gravimetric analysis, and their solubility and viscosity were measured. The polyamides synthesized here are amorphous and showed relatively good solubility in polar aprotic solvents and demonstrate the ability to form brownish hard films by solvent casting; their inherent viscosities ranged from 49 to 55 mL/g. The average molecular weights of polyamides were in the range of M_w = 11,950–5592 g/mol (MWD = 1.21–1.87). These polyamides had relatively high thermal stability with T_g values up to 276°C, 10% weight loss temperatures (T_10%) in the range of 364–476°C, and char yields at 600°C in N₂ up to 72%. They also exhibit emission in the solid state and in dilute (0.2 g/dL) DMAc solution at 425–484 nm with photoluminescence quantum (?_f) yields in the range of 14–23%. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012