In situ polymerization of polyimide‐based nanocomposites via covalent incorporation of functionalized graphene nanosheets for enhancing mechanical,thermal, and electrical properties

In this study, we report an effective method to fabricate high‐performance polyimide (PI)‐based nanocomposites using 3‐aminopropyltriethoxysilane functionalized graphene oxide (APTSi‐GO) as the reinforcing filler. APTSi‐GO nanosheets exhibit good dispersibility and compatibility with the polymer matrix because of the strong interfacial covalent interactions. PI‐based nanocomposites with different loadings of functionalized graphene nanosheets (FGNS) were prepared by in situ polymerization and thermal imidization. The mechanical performance, thermal stability, and electrical conductivity of the FGNS/PI nanocomposites are significantly improved compared with those of pure PI by adding only a small amount of FGNS. For example, a 79% improvement in the tensile strength and a 132% increase in the tensile modulus are achieved by adding 1.5 wt % FGNS. The electrical and thermal conductivities of 1.5 wt % FGNS/PI are 2.6 × 10^?3 S/m and 0.321 W/m·K, respectively, which are ～10¹⁰ and two times higher than those of pure PI. Furthermore, the incorporation of graphene significantly improves the glass‐transition temperature and thermal stability. The success of this approach provides a good rationale for developing multifunctional and high‐performance PI‐based composite materials. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42724.     

GO@TA-Fe/PVDF纳米复合材料制备与介电性能

为降低氧化石墨烯（GO）/聚偏氟乙烯（PVDF）体系的介电损耗,本文采用单宁酸-铁配合物（TA-Fe）修饰GO表面,将改性GO和PVDF复合后制得了GO@TA-Fe/PVDF纳米复合电介质材料,研究了GO@TA-Fe对PVDF复合材料的微观形貌及介电性能影响。研究结果表明,TA-Fe包覆层强化了GO与PVDF基体间界面相容性及界面作用力,促进了GO在基体中均匀分散;TA-Fe界面层的存在显著降低了GO/PVDF漏导电流及损耗,归因于绝缘界面层有效阻止了GO之间直接接触,抑制漏导电流;TA-Fe用量对体系介电性能有明显影响,随TA-Fe用量增大,体系的介电损耗和电导率显著降低。与GO/PVDF相比,质量分数2%的GO@TA-Fe/PVDF在100Hz下介电常数为1000,而介电损耗由19.8降低为0.08。本研究制备的高介电常数及低损耗的柔性GO@TA-Fe/PVDF纳米电介质材料在电子器件及电力设备领域具有潜在应用。     

Preparation of functional reduced graphene oxide and its influence on the properties of polyimide composites

Homogeneous dispersion and strong filler–matrix interfacial interactions were vital factors for graphene for enhancing the properties of polymer composites. To improve the dispersion of graphene in the polymer matrix and enhance the interfacial interactions, graphene oxide (GO), as an important precursor of graphene, was functionalized with amine‐terminated poly(ethylene glycol) (PEG–NH₂) to prepare GO–poly(ethylene glycol) (PEG). Then, GO–PEG was further reduced to prepare modified reduced graphene oxide (rGO)–PEG with N₂H₄·H₂O. The success of the modification was confirmed by Fourier transform infrared spectroscopy, thermogravimetric analysis, and Raman spectroscopy. Different loadings of rGO–PEG were introduced into polyimide (PI) to produce composites via in situ polymerization and a thermal reduction process. The modification of PEG–NH₂ on the surface of rGO inhibited its reaggregation and improved the filler–matrix interfacial interactions. The properties of the composites were enhanced by the incorporation of rGO–PEG. With the addition of 1.0 wt % rGO–PEG, the tensile strength of PI increased by 81.5%, and the electrical conductivity increased by eight orders of magnitude. This significant improvement was attributed to the homogeneous dispersion of rGO–PEG and its strong filler–matrix interfacial interactions. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 45119.     

Development and characterization of co‐polyimide/attapulgite nanocomposites with highly enhanced thermal and mechanical properties

A series of co‐polyimide/attapulgite (co‐PI/AT) nanocomposites have been successfully fabricated from anhydride‐terminated polyimide (PI) and γ‐aminopropyltriethoxysilane (APTES)‐modified fibrous attapulgite (AT). Co‐PI was prepared from 4,4′‐diaminodiphenyl ether (ODA), 4,4′‐oxydiphthalic anhydride (ODPA), and 2,2‐bis[4‐(3,4‐dicarboxyphenoxy)phenyl]propane dianhydride (BPADA) by using the method of chemical imidization. Different amount of AT (0, 1, 3, 5, 7 wt%) were introduced into co‐PI via strong covalent interactions between terminal anhydride and amino groups. The properties of co‐PI/AT nanocomposites such as morphology, thermal stability, mechanical properties, and UV transparency were investigated to illustrate the contribution of the introduction of AT into the PI matrix. FTIR spectra and SEM images revealed that network structures between co‐PI and AT are formed, which endowed the nanocomposites with outstanding thermal and mechanical properties. The co‐PI/AT nanocomposites exhibited excellent thermal and thermo‐oxidative stabilities with the onset decomposition temperature and 10% weight loss temperature increasing to the ranges of 502–510°C and 555–562°C from 480°C to 526°C for the pristine co‐PI, respectively. The glass transition temperatures of these co‐PI/AT nanocomposites increased to the range of 231–238°C from 222°C for pure co‐PI. The co‐PI/AT nanocomposites films were found to be transparent, flexible, and tough. By incorporating 5 wt% AT into the co‐PI matrix, the tensile strength, elongation at break, and Young's modulus of the co‐PI/AT nanocomposites reached 110.7 MPa, 14.5%, and 1.2 GPa, respectively, which are 50%, 120%, and 80% increased compared with the values of pristine PI. POLYM. COMPOS., 35:86–96, 2014. © 2013 Society of Plastics Engineers     

Morphology evolution induced by carbon nanotubes on thermal and mechanical characters of semi-crystalline aromatic polyimide

A series of nanocomposites based on a new semi-crystalline polyimide (PI) and multi-walled carbon nanotubes (MWCNTs) were prepared by in situ polymerization. The TEM measurement reveals the improved dispersion of carboxylic acid-functionalized MWCNTs (COOH-MWCNTs) in semi-crystalline PI compared with pristine MWCNTs. The TGA analysis show that the concentration of carboxylic acid groups on the surface of nanotubes is about 4.34 wt%. The FT-IR spectroscopy analysis indicate that the imide rings of the PI interact non-covalently with nanotubes. The Polarized optical microscopy observation reveals significant morphology evolution in semi-crystalline PI induced by MWCNTs. The SEM micrographs suggest the strong interfacial interaction between COOH-MWCNTs and PI main chains, and significant changes in the fracture surfaces morphology. The WAXRD measurements reveal that COOH-MWCNTs promote the semi-crystalline PI crystallinity and structure change. COOH-MWCNTs can more efficiently improve the mechanical and thermal properties of resulting nanocomposites than pristine MWCNTs. COOH-MWCNT/PI nanocomposites show increases of Young’s modulus and yield strength, as high as 20–30 %, without sacrificing the elongation at break at loadings of 0.5 wt% nanotubes. Furthermore, with increasing the loadings of COOH-MWCNTs to 1.0 wt%, Young’s modulus and yield strength decrease due to nanotube aggregation, but elongation at break increase about 46 %. An abrupt increase of elongation at break in pristine MWCNT/PI nanocomposites was also registered at nanotubes loadings increasing from 0.5 to 1 wt%. These results indicate that the properties of semi-crystalline PI nanocomposites reinforced with carbon nanotubes are not only determined by the dispersion of nanotubes in the PI matrix and their interfacial interactions, but also by the crystalline phase morphology evolution in the PI matrix.     

Enhanced thermal conductivity and dimensional stability of flexible polyimide nanocomposite film by addition of functionalized graphene oxide

Polyimide (PI) nanocomposites with both enhanced thermal conductivity and dimensional stability were achieved by incorporating glycidyl methacrylate‐grafted graphene oxide (g‐GO) in the PI matrix. The PI/g‐GO nanocomposites exhibited linear enhancement in thermal conductivity when the amount of incorporated g‐GO was less than 10 wt%. With the addition of 10 wt% of g‐GO to PI (PI/g‐GO‐10), the thermal conductivity increased to 0.81 W m^?1 K^?1 compared to 0.13 W m^?1 K^?1 for pure PI. Moreover, the PI/g‐GO‐10 composite exhibited a low coefficient of thermal expansion (CTE) of 29 ppm °C^?1. The values of CTE and thermal conductivity continuously decreased and increased, respectively, as the g‐GO content increased to 20 wt%. Combined with excellent thermal stability and high mechanical strength, the highly thermally conducting PI/g‐GO‐10 nanocomposite is a potential substrate material for modern flexible printed circuits requiring efficient heat transfer capability.     

Enhanced dielectric properties of PVDF nanocomposites with modified sandwich-like GO@PVP hybrids

ABSTRACT

Herein, graphene oxide (GO) nanosheets coated with insulated polyvinyl pyrrolidone (PVP) were integrated into poly(vinylidene fluoride) (PVDF) to investigate the effects of the insulating PVP shell, loading, and its reaction time on the dielectric properties of the nanocomposites. Compared with the pristine GO/PVDF, the GO@PVP/PVDF nanocomposites show an improvement of the filler dispersion, and significantly suppressed conductivity and loss. Activation energies of GO/PVDF and GO@PVP/PVDF nanocomposites are calculated as 1.247 eV and 0.435 eV, respectively, indicating that the presence of PVP layer on the GO surface reduces the relaxation activation energy and makes the relaxation occurrence at low temperatures.     

In situ preparation of transparent polyimide nanocomposite with a small load of graphene oxide

Polyimide (PI) nanocomposites with 4,4′‐bisphenol A dianhydride, 4,4′‐oxydiphthalic anhydride, and diaminodiphenyl methane (MDA) as comonomers and functionalized with graphene oxide (GO), were prepared by in situ polymerization. Only a small amount of GO (0.03–0.12 wt %) is added to improve the mechanical properties of PI and to avoid a substantial decrease of PI transparence. The nanocomposites are characterized by FTIR, X‐ray diffraction, thermogravimetric analysis, transmission electron microscope, tensile test, and UV‐vis spectroscopy. It is demonstrated that the PI/GO composite films possess transmittance of above 80% at wavelengths of 500–800 nm when the GO content is under 0.12 wt %, while the stress intensity and Young's modulus are improved by 29 and 25%, respectively. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Mechanical,thermal and electrical properties of multi‐walled carbon nanotube/aluminium nitride/polyetherimide nanocomposites

A series of polyimide‐based nanocomposites containing polyimide‐grafted multi‐walled carbon nanotubes (PI‐g MWCNTs) and silane‐modified ceramic (aluminium nitride (AlN)) were prepared. The mechanical, thermal and electrical properties of hybrid PI‐g MWCNT/AlN/polyetherimide nanocomposites were investigated. After polyimide grafting modification, the PI‐g MWCNTs showed good dispersion and wettability in the polyetherimide matrix and imparted excellent mechanical, electrical and thermal properties. The utilization of the hybrid filler was found to be effective in increasing the thermal conductivity of the composites due to the enhanced connectivity due to the high‐aspect‐ratio MWCNT filler. The use of spherical AlN filler and PI‐g MWCNT filler resulted in composite materials with enhanced thermal conductivity and low coefficient of thermal expansion. Results indicated that the hybrid PI‐g MWCNT and AlN fillers incorporated into the polyetherimide matrix enhanced significantly the thermal stability, thermal conductivity and mechanical properties of the matrix. Copyright © 2012 Society of Chemical Industry     

The Role of Organically Modified Clay Particle on Thermal,Mechanical and Gas Barrier Properties of Polyimide Nanocomposites and Toward Improvement of Gas Selectivities

ABSTRACT

Novel mixed matrix membranes with various Cloisite®15A in polyimide (PI) matrix were developed for gas separation. The synthesized membranes were characterized by the FE-SEM, XRD, DTG and TEM. According to FE-SEM results, at 3 wt% of Cloisite®15A, the fillers were dispersed homogeneously in the PI polymer matrix. The tensile properties of PI/Cloisite®15A increased gradually with clay content. It was interesting to note that the pure gas selectivity was seen to be increased with decreasing the filler loading. At 1 wt% clay loading, PI/Cloisite®15A nanocomposites showed an increase of 55% in CO₂/CH₄ ideal selectivity over pristine PI membrane.     

Novel in situ carbon nanofiber/polydimethylsiloxane nanocomposites: Synthesis,morphology, and physico‐mechanical properties

A series of carbon nanofiber (CNF)/polydimethylsiloxane (PDMS)‐based nanocomposites was prepared by anionic ring opening polymerization of octamethylcyclotetrasiloxane (D₄) in presence of pristine CNF and amine‐modified CNF. A detailed study of morphology–property relationship of the nanocomposites was carried out in order to understand the effect of chemical modification and loading of filler on property enhancement of the nanocomposites. An elaborate comparison of structure and properties was carried out for the nanocomposites prepared by in situ and conventional ex situ methods. Pronounced improvement in degree of dispersion of the fillers in the matrix on amine modification of CNFs was reflected in mechanical properties of the modified nanocomposites. Maximum upliftment in mechanical properties was observed for in situ prepared amine modified CNF/hydroxyl PDMS nanocomposites. For 8 phr filler loading, tensile strength increased by 370%, while tensile modulus showed an increase of 515% compared with the virgin elastomer. Furthermore, in situ prepared unmodified CNF/hydroxyl PDMS nanocomposites showed an increase of 141°C in temperature of maximum degradation (T_max) for 8 phr CNF loading. These results were correlated with the morphological analysis through transmission electron microscopic studies. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Performance enhancement of polylactide by nanoblending with POSS and graphene oxide

We report the effect of filler modification on the properties of polylactide (PLA)‐based nanocomposites, where graphene oxide (GO) nanosheets and polyhedral oligomeric silsesquioxane (POSS) nanocages are employed as nanofillers. The organically treated nanofillers are termed as GO‐functionalized and POSS‐functionalized. The synthesis of the nanocomposites was carried out via in situ ring‐opening polymerization of lactic acid (LA). The following four naocomposite systems were prepared, characterized, and compared to achieve a better understanding of structure‐property relationship (1) PLA/GO‐functionalized, (2) PLA/POSS‐functionalized, (3) PLA/physical mixture of GO‐functionalized and POSS‐functionalized, and (4) PLA/GO‐graft‐POSS (with eight hydroxyl groups). As revealed by the thermal and mechanical (nanoindendation) characterization, that the nanocomposites having a combination of GO and POSS as nanofiller, either as physical mixture of GO‐functionalized and POSS‐functionalized or as GO‐graft‐POSS, is far more superior as compared with the nanocomposites having individually dispersed nanofillers in the PLA matrix. Observed enhancement is attributing to the synergistic effect of the nanofillers as well as better dispersion of the modified‐fillers in the matrix. POLYM. COMPOS., 35:118–126, 2014. © 2013 Society of Plastics Engineers     

Influence of aminosilane‐functionalized carbon nanotubes on the rheometric,mechanical, electrical and thermal degradation properties of epoxidized natural rubber nanocomposites

We describe the preparation, characterization and physical properties of multiwalled carbon nanotube (MWCNT)‐filled epoxidized natural rubber (ENR) composites. To ensure better dispersion in the elastomer matrix, the MWCNTs were initially subjected to aminopropyltriethoxysilane (APS) treatment to bind amine functional groups (?NH₂) on the nanotube surface. Successful grafting of APS on the MWCNT surface through Si–O–C linkages was confirmed using Fourier transform infrared spectroscopy. Grafting of APS on the MWCNT surface was further corroborated using elemental analysis. ENR nanocomposites with various filler loadings were prepared by melt compounding to generate pristine and APS‐modified MWCNT‐filled elastomeric systems. Furthermore, we determined the effects of various filler loadings on the rheometric, mechanical, electrical and thermal degradation properties of the resultant composite materials. Rheometric cure characterization revealed that the torque difference increased with pristine MWCNT loading compared to the gum system, and this effect was more pronounced when silane‐functionalized MWCNTs were loaded, indicating that this effect was due to an increase in polymer–carbon nanotube interactions in the MWCNT‐loaded materials. Loading of silane‐functionalized MWCNTs in the ENR matrix resulted in a significant improvement in the mechanical, electrical and thermal degradation properties of the composite materials, when compared to gum or pristine MWCNT‐loaded materials.© 2013 Society of Chemical Industry     

In situ Synthesis and mechanical,thermal properties of polyimide nanocomposite film by addition of functionalized graphene oxide

Polyimide (PI) and chemical modified graphene oxide nanocomposite films are prepared by in situ polymerization from solutions of pyromellitic dianhydride and 4,4′‐oxydianiline with various amount (0.5–2 wt%) of 3‐aminopropyltriethoxysilane (APTS) functionalized graphene oxide (GO) sheets in dimethylacetamide. The APTS functionalized GO (GO‐APTS) is a versatile platform for polymer grafting, improving excellent dispersion of GO in the PI matrix, and forming strong interaction with the PI matrix. The GO‐APTS/PI nanocomposites exhibited improvement in mechanical and thermal properties by addition of a small amount of GO‐APTS. With the addition of a small amount of GO‐APTS (1.5 wt%) to PI matrix, mechanical properties with the tensile strength and Young's modulus improved by 45% and 15%, respectively. The thermal analysis showed that the thermal stability of PI was slightly enhanced by the incorporation of GO‐APTS (1.5 wt%). This approach provides a strategy for developing high performance functionalized GO‐polymer composite materials. POLYM. COMPOS., 37:907–914, 2016. © 2014 Society of Plastics Engineers     

Organomodification of montmorillonite and its effects on the properties of poly(butylene succinate) nanocomposites

The pristine sodium montmorillonite (MMT) was organically modified with hexadecyltrimethylammonium bromide (HTAB) at different contents. The organoclay was characterized by X‐ray diffraction (XRD), Fourier transform infrared spectroscopy, energy dispersive X‐ray techniques, and thermogravimetric analysis. Then, poly(butylene succinate) (PBS) nanocomposites were prepared by melt‐mixing process using maleic anhydride‐grafted PBS (PBS‐g‐MA) as compatibilizer. It was found that the mechanical properties of PBS nanocomposites filled with organoclay were apparently higher than that of the nanocomposite filled with MMT. This is attributed to the better filler–matrix interactions between PBS and the organoclay and the better filler dispersion. This is verifiable through the XRD, scanning electron microscopy, and transmission electron microscopy. The addition of PBS‐g‐MA further improved the mechanical properties. It was also found that our laboratory synthesized organoclay modified with HTAB has provided a better reinforcing efficiency when compared with the commercial octadecylamine‐modified organoclay. Besides that the thermal properties of PBS nanocomposites were studied through differential scanning calorimetry. POLYM. ENG. SCI., 2013. © 2013 Society of Plastics Engineers     

Structure–properties investigations in hydrophilic nanocomposites based on polyurethane/poly(2–hydroxyethyl methacrylate) semi‐interpenetrating polymer networks and nanofiller densil for biomedical application

Nanocomposites based on sequential semi–interpenetrating polymer networks (semi–IPNs) of crosslinked polyurethane and linear poly(2‐hydroxyethyl methacrylate) filled with 1–15 wt % of nanofiller densil were prepared and investigated. Nanofiller densil used in an attempt to control the microphase separation of the polymer matrix by polymer–filler interactions. The morphology (SAXS, AFM), mechanical properties (stress–strain), thermal transitions (DSC) and polymer dynamics (DRS, TSDC) of the nanocomposites were investigated. Special attention has been paid to the raising of the hydration properties and the dynamics of water molecules in the nanocomposites in the perspective of biomedical applications. Nanoparticles were found to aggregate partially for higher than 3 and 5 wt % filler loading in semi–IPNs with 17 and 37 wt % PHEMA, respectively. The results show that the good hydration properties of the semi–IPN matrix are preserved in the nanocomposites, which in combination with results of thermal and dielectric techniques revealed also the existence of polymer–polymer and polymer–filler interactions. These interactions results also in the improvement of physical and mechanical properties of the nanocomposites in compare with the neat matrix. The improvement of mechanical properties in combination with hydrophilicity and biocompatibility of nanocomposites are promising for use these materials for biomedical application namely as surgical films for wound treatment and as material for producing the medical devises. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43122.     

Graphene Oxide as a Prospective Graft in Polyethylene Glycol for Enhancing the Toughness of Epoxy Nanocomposites

Polyethylene glycol (PEG) was successfully grafted onto the surface of graphene oxide (GO) by the “grafting to” technique. PEG, GO as well as the PEG grafted GO (GO-g-PEG) was successfully incorporated into an epoxy matrix and subsequently cured using diethylenetoluenediamine (DETDA) to make epoxy nanocomposites. Mechanical, thermal, and rheological properties of the epoxy nanocomposites were studied to check the effectiveness of these fillers in the epoxy matrix. An improvement of 255% and 334% at a very low filler loading of about 0.1 wt% was observed in the fracture toughness of GO and GO-g-PEG loaded systems versus the neat epoxy. Toughening mechanisms are also explained by analyzing SEM images of the fractured surface. Modeling of rheological properties was carried out by following time-independent Newtonian model. The homogeneity of the epoxy filler systems are explained with the help of Cole–Cole plots. The thermal stability of the filler loaded epoxy composites was examined in detail by TGA. Improvements in mechanical properties reveal the potential benefit of the grafting process in epoxy toughening. POLYM. ENG. SCI., 60:773–781, 2020. © 2020 Society of Plastics Engineers     

An Innovative Approach to the Synthesis of PMMA/PEG/Nanobifiller Filled Nanocomposites with Enhanced Mechanical and Thermal Properties

A facile route was adopted to blend the matrix. The PMMA/PEG blend was reinforced with three types of nanofillers, i.e., pristine MWCNT (P-CNT), amine functionalized MWCNT (PDA-EA-CNT) and nanobifiller i.e. nanodiamond functional MWCNT (PDA-EA-CNT-ND) to yield three different types of nanocomposites i.e. PMMA/PEG/P-CNT, PMMA/PEG/PDA-EA-CNT and PMMA/PEG/PDA-EA-CNT-ND. These nanocomposites were reinforced with nanofiller loading (1 wt. %, 3 wt. %, 5 wt. %, 10 wt. %, 30 wt. % and 50 wt. %) by solution casting method. Structure of composite and nanofillers was confirmed by FTIR. FESEM imaging revealed that nanocomposites have micro porous morphology. At high magnification, distribution of functionalized CNT/ND appears to be protruding out of the polymeric matrix. The TGA result suggests that the thermal stability of the nanocomposites was enhanced in comparison to PMMA due to grafting of filler molecules with PMMA/PEG macromolecules. The DTG results showed that the bifiller nanocomposites (PMMA/PEG/PDA-EA-CNT-ND) exhibited improved thermal stability with T_max (431^°C) as compared to P-CNT and amine functionalized CNT (PMMA/PEG/PDA-EA-CNT) with T_max of 395^°C and 418^°C respectively. XRD results showed fine interaction between filler and the polymeric matrix. As the filler loading was increased the composites showed pronounced XRD peak at 25.9^°, corresponding to (002) reflection of nanotubes. Significant improvement in the mechanical properties of composites was recorded with the reinforcement of fillers as compared to the neat matrix. The most significant improvement in tensile strength and elastic modulus was observed for the bifiller nanocomposites with 5 wt. % PDA-EA-CNT-ND. They showed a tensile strength and elastic modulus of 29.9 MPa and 1474.31 MPa respectively as compared to amine functionalized CNT with tensile strength (25.7) and elastic modulus (1466.99 MPa)and P-CNT with tensile strength(25 MPa) and elastic modulus (1155.75 MPa).     

ZrO2 functionalized graphene Oxide/SEBS‐Based nanocomposites for efficient electromagnetic interference shielding applications

ZrO₂‐coated graphene oxide (GO)/SEBS(styrene‐ethylene‐butylene‐styrene)‐based nanocomposites were prepared for use as an electromagnetic interference (EMI) shielding material. Transmission electron microscopy (TEM) reveals almost every individual GO is fully and homogeneously covered with uniform ZrO₂. X‐ray diffraction (XRD) patterns and Differential scanning calorimetry (DSC) revealed increased ordering of ‐(CH₂‐CH₂)n segments in the poly(ethylene‐co‐1‐butene) block of the SEBS matrix in the case of SEBS/ZrO₂‐coated graphene oxide composites than in the SEBS/pristine graphene oxide nanocomposite. Thermogravimetric analysis (TGA) proved better oxidation resistance of SEBS/ZrO₂‐coated GO nanocomposite compared to that of SEBS/pristine GO nanocomposite. The present nanocomposites exhibited excellent EMI shielding effectiveness (SE) over X‐band (8.2 GHz–12.4 GHz) with EMI SE of 37.9 dB. J. VINYL ADDIT. TECHNOL., 25:E130–E136, 2019. © 2018 Society of Plastics Engineers     

Envisioning the composition effect on structural,magnetic, thermal and optical properties of mesoporous MgFe2O4-GO nanocomposites

The effect of variation in composition on the structural, magnetic, optical and photo catalytic activity of magnesium ferrite (MgFe₂O₄) -graphene oxide (GO) nanocomposites was studied. Magnetic nanocomposites of GO and MgFe₂O₄ nanoparticles (NPs) with varying w/w ratio were synthesized by facile sonication method. X-Ray diffraction patterns confirmed the presence of spinel ferrite phase in the nanocomposites with the crystalline size 8–32 nm. Fourier transformation infrared (FT-IR) spectra of the nanocomposites displayed absorption bands corresponding to GO and MgFe₂O₄ NPs along with red shift of bands corresponding to C=O, C=C and O-H stretching. Thermo gravimetric analysis confirmed higher stability of nanocomposites over pristine GO. Saturation magnetization increased from 3.63 to 11.10 emu/g with the increase in content of MgFe₂O₄ NPs in the nanocomposites. Scanning electron microscopy analysis along with energy dispersive spectroscopy (SEM-EDX) confirmed the presence of MgFe₂O₄ NPs along with GO sheets. Immobilization of clusters of MgFe₂O₄ NPs onto GO sheets was evident from transmission electron micrographs (TEM) of all the nanocomposites. BET surface area of the nanocomposites ranged from 63.04 to 165.29 m²/g and was maximum when GO:MgFe₂O₄ w/w ratio was 1:0.5. It was markedly higher than pristine GO and MgFe₂O₄ NPs. Optical studies revealed lowering of the band gap in the nanocomposites upto 2.21 eV as compared to pristine MgFe₂O₄ NPs. Photoluminescence (PL) spectra of nanocomposites displayed quenching of PL intensity with increase of GO content. Band gap also displayed similar trend. The synthesized nanocomposites were used as photocatalysts for methylene blue dye degradation under visible light irradiation. The nanocomposite with GO to MgFe₂O₄ ratio 1:0.5 displayed best activity with complete degradation of dye in 30 min. The results confirmed that the composition of GO based magnetic nanocomposites can be tailored for efficient removal of contaminants.