Morphology and mechanical properties of natural rubber latex films modified by exfoliated Na‐montmorillonite/polyethyleneimine‐g‐poly (methyl methacrylate) nanocomposites

Na‐montmorillonite/polyethyleneimine‐g‐poly(methyl methacrylate) (Na‐MMT/PEI‐g‐PMMA) nanocomposite latexes were prepared by soap‐free emulsion polymerization in the aqueous suspension of Na‐MMT. The exfoliated morphology of the nanocomposites was confirmed by XRD and TEM. With the aim of improving morphology and mechanical properties of natural rubber latex (NRL) films, the synthesized Na‐MMT/PEI‐g‐PMMA nanocomposites were mixed with NRL by latex compounding technology. The results of SEM and AFM analysis showed that the surface of NRL/Na‐MMT/PEI‐g‐PMMA film was smoother and denser than that of pristine NRL film while Na‐MMT was dispersed uniformly on the fracture surface of the modified films, which suggested the good compatibility between NRL and Na‐MMT/PEI‐g‐PMMA. The tensile strength of NRL/Na‐MMT/PEI‐g‐PMMA films was increased greatly by 85% with 10 phr Na‐MMT/PEI‐g‐PMMA when Na‐MMT content was 3 wt % and the elongation at break also increased from 930% to 1073% at the same time. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43961.     

Effect of clay platelet dispersion as affected by the manufacturing techniques on thermal and mechanical properties of PMMA‐clay nanocomposites

In this work, the properties of Poly(methyl methacrylate) (PMMA)‐clay nanocomposites prepared by three different manufacturing techniques viz., solution mixing, melt mixing, and in‐situ bulk polymerization in presence of clay were studied. Morphological analysis revealed that the extent of intercalation and dispersion of the nanoclay were relatively higher in the in‐situ polymerized nanocomposites than those of solution and melt blended nanocomposites. Differential Scanning Calorimetric study indicated maximum increment in T_g of the PMMA in the in‐situ polymerized PMMA‐clay nanocomposites. Thermo gravimetric analysis showed improved thermal stability of PMMA in all the nanocomposites and the maximum improvement was for in‐situ polymerized nanocomposites. The storage moduli of all the nanocomposites were higher than the pure PMMA. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Preparation and properties of polyethylene/montmorillonite nanocomposites formed via ethylene copolymerization

BACKGROUND: In situ formation of polyethylene/clay nanocomposites is one of the prevalent preparation methods that include also solution blending and melt blending with regard to process simplification, economy in cost, environment protection and marked improvement in the mechanical properties of the polymeric matrix. In the work reported here, the preparation of linear low‐density polyethylene (LLDPE) and fabrication of polymer/clay nanocomposites were combined into a facile route by immobilizing pre‐catalysts for ethylene oligomerization on montmorillonite (MMT). RESULTS: [(2‐ArN?C(Me))₂C₅H₃N]FeCl₂ (Ar = 2,4‐Me₂(C₆H₃)) was supported on MMT treated using three different methods. The MMT‐supported iron complex together with metallocene compound rac‐Et(Ind)₂ZrCl₂ catalyzed ethylene to LLDPE/MMT nanocomposites upon activation with methylaluminoxane. The oligomer that was formed between layers of MMT promoted further exfoliation of MMT layers. The LLDPE/MMT nanocomposites were highly stable upon heating. Detailed scanning electron microscopy analysis revealed that the marked improvement in impact strength of the LLDPE/MMT nanocomposites originated from the dispersed MMT layers which underwent cavitation upon impact and caused plastic deformation to absorb most of the impact energy. In general, the mechanical properties of the LLDPE/MMT nanocomposites were improved as a result of the uniform dispersion of MMT layers in the LLDPE matrix. CONCLUSION: The use of the MMT‐supported iron‐based diimine complex together with metallocene led to ethylene copolymerization between layers of MMT to form LLDPE/MMT nanocomposites. The introduction of exfoliated MMT layers greatly improved the thermal stability and mechanical properties of LLDPE. Copyright © 2009 Society of Chemical Industry     

Poly(vinyl alcohol) nanocomposites with different clays: Pristine clays and organoclays

Poly(vinyl alcohol) (PVA)/clay nanocomposites were synthesized using the solution intercalation method. Na ion‐exchanged clays [Na⁺–saponite (SPT) and Na⁺–montmorillonite (MMT)] and alkyl ammonium ion‐exchanged clays (C₁₂–MMT and C₁₂OOH–MMT) were used for the PVA nanocomposites. From the morphological studies, the Na ion‐exchanged clay is more easily dispersed in a PVA matrix than is the alkyl ammonium ion‐exchanged clay. Attempts were also made to improve both the thermal stabilities and the tensile properties of PVA/clay nanocomposite films, and it was found that the addition of only a small amount of clay was sufficient for that purpose. Both the ultimate tensile strength and the initial modulus for the nanocomposites increased gradually with clay loading up to 8 wt %. In C₁₂OOH–MMT, the maximum enhancement of the ultimate tensile strength and the initial modulus for the nanocomposites was observed for blends containing 6 wt % organoclay. Na ion‐exchanged clays have higher tensile strengths than those of organic alkyl‐exchanged clays in PVA nanocomposites films. On the other hand, organic alkyl‐exchanged clays have initial moduli that are better than those of Na ion‐exchanged clays. Overall, the content of clay particles in the polymer matrix affect both the thermal stability and the tensile properties of the polymer/clay nanocomposites. However, a change in thermal stability with clay was not significant. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 3208–3214, 2003     

Influence of clay and predispersion method on the structure and properties of polystyrene (PS)‐clay nanocomposites

To prepare the polystyrene (PS)‐clay nanocomposites via an in situ emulsion polymerization, a clay predispersion method, i.e. dispersing the organic clay in the emulsifier solution by the assistance of ultrasonic, was proposed in this study. The conventional method, predispersing the organic clay into the monomer, was also presented for the comparison. The morphology analysis based on the X‐ray Deflection (XRD) and Transmission Electronic Microscopy (TEM) results suggested that the more uniform clay dispersion in the final nanocomposites could be achieved through the new method. The inorganic clay (Na‐MMT) and two organic clays (C₁₈‐MMT and VC₁₈‐MMT) synthesized by exchanging inorganic cations with the trimethyloctadecyl ammonium chloride (OTAC) and the vinylbenzyldimethyloctadecyl ammoniun chloride (VOAC) were chosen to investigate the influence of the clay surface modification on the properties of nanocomposites. The Dynamic Mechanical Analysis (DMA) results showed the storage modulus G′s of the nanocomposites had different enhancements over that of the pure PS, especially when the temperature approached the glass transition temperature (T_g). The T_gs of the nanocomposites, however, varied with the microstructure and the interactions between the polymer and the clay layers. The Na‐MMT and VC₁₈‐MMT increased the T_g, while the T_gs of PS/C₁₈‐MMT nanocomposites were slightly lower than that of the pure PS. POLYM. ENG. SCI., 2009. © 2009 Society of Plastics Engineers     

Functional copolymer/organo‐MMT nanoarchitectures. II. Dynamic mechanical behavior of poly(MA‐co‐BMA)s‐organo‐MMT clay nanocomposites

Functional copolymer/organo‐silicate [N,N′‐dimethyldodecyl ammonium cation surface modified montmorillonite (MMT)] layered nanocomposites have been synthesized by interlamellar complex‐radical copolymerization of preintercalated maleic anhydride (MA)/ organo‐MMT complex as a ‘nano‐reactor’ with n‐butyl methacrylate (BMA) as an internal plasticization comonomer in the presence of radical initiator. Synthesized copolymers and their nanocomposites were investigated by dynamic mechanic analysis, X‐ray diffraction, SEM, and TEM methods. It was found that nanocomposite dynamic mechanical properties strongly depend on the force of interfacial MA … organo‐MMT complex formation and the amount of flexible n‐butyl ester linkages. An increase in both of these parameters leads to enhanced intercalation and exfoliation in situ processes of copolymer chains and the formation of hybrid nanocomposites. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Synthesis and antimicrobial activity of the Schiff base from polyoxyalkylene‐montmorillonite nanocomposites and aldehydes

Vanillin (4‐hydroxy‐3‐methoxy benzaldehyde) and 5‐formylamino salicylic acid microbicides were reacted with polyoxyalkylene‐montmorillonite (D_230–2000‐MMT) nanocomposites. The microstructure of these Schiff base nanocomposites was characterized by TEM and XRD. D_230–2000‐MMT nanocomposites were prepared by an ion exchange process of sodium montmorillonite (Na‐MMT) and NH₃ ⁺ groups in polyoxyalkylene amine hydrochloride with three different molecular masses of D₂₃₀, D₄₀₀, and D₂₀₀₀. Wide‐angle X‐ray diffraction confirms the intercalation of the polymer between the silicate layers. Electrostatic interaction between the positively charged NH₃ ⁺ groups and the negatively charged surface of MMT was observed. The nanocomposites were tested for antimicrobial activity against the Gram‐negative bacteria (Escherichia coli NCIM 2065), Gram‐positive bacteria (Bacillus subtillus ATCC), and fungi (Candida albicans SC5314 and Cryptococcus neoformans). The D₂₀₀₀‐MMT/vanillin Schiff base nanocomposite strongly inhibited the growth of all microorganisms that can be used in different applications. The amount of loaded polymer and the structure of the nanocomposite play an important role in inhibiting the bacterial and fungal strains. It is found that the Schiff base nanocomposite affect the morphology, oxygen consumption, and the release of cytoplasmic constituents such as potassium (K⁺), sodium (Na⁺), and calcium (Ca²⁺) ions leading to death of the cells. POLYM. COMPOS., 2012. © 2012 Society of Plastics Engineers     

The effect of clay modification on the mechanical properties of poly(methyl methacrylate)/organomodified montmorillonite nanocomposites prepared by in situ suspension polymerization

Poly(methylmethacrylate) (PMMA)/montmorillonite (MMT) nanocomposites were prepared by in situ suspension polymerization. MMT was previously organically modified by different modification agents [dioctadecyl dimethyl ammonium chloride (DODAC) and methacrylatoethyltrimethyl ammonium chloride (MTC)] and different modification method (cation‐exchange reaction and grafting reaction), ultimately giving rise to five kinds of organomodified MMT (OMMT). The structure of the OMMT was studied by Wide angle X‐ray diffraction (WAXD) and Fourier transform infrared spectroscopy (FTIR). Meanwhile, the structure of the PMMA/MMT nanocomposites microspheres was also investigated by WAXD. The molecular weight of the polymers extracted from PMMA/MMT nanocomposites was measured by gel permeation chromatograph (GPC). Finally, the mechanical properties of these PMMA/MMT nanocomposites were studied in detail. It was found that large interlayer spacing (d₀₀₁) of OMMT could not entirely ensure an exfoliated structure of resultant PMMA/MMT nanocomposites, while OMMT with relative small d₀₀₁ could still yield exfoliated structure as long as the compatibility between OMMT and polymer matrix was favorable. In addition, the results of mechanical investigation indicated that the compatibility between OMMT and PMMA matrix turned out to be the dominant factor deciding the final mechanical properties of PMMA/MMT nanocomposites. POLYM. COMPOS., 37:1705–1714, 2016. © 2014 Society of Plastics Engineers     

Effect of silane grafting on the microstructure of high‐density polyethylene/organically modified montmorillonite nanocomposites

Organically modified montmorillonite (org‐MMT) and high‐density polyethylene (HDPE) grafted with silane groups (HDPE‐g‐silane) were melt compounded to give HDPE‐g‐silane‐blend‐org‐MMT nanocomposites. X‐ray diffractometry was performed to investigate the intercalation effect. Transmission electron microscopy was applied to observe the dispersion of org‐MMT layers in HDPE matrices. The results indicate that an intercalated structure can be easily obtained in HDPE‐g‐silane‐blend‐org‐MMT nanocomposites. Furthermore, positron annihilation lifetime spectroscopy was used to characterize the microstructure of the composites. It is found that the ortho‐positron (o‐Ps) intensity for HDPE‐g‐silane is decreased by approximately 10% with a narrower lifetime distribution than that for HDPE. With increasing org‐MMT concentration, the o‐Ps intensity I₃ increases for HDPE‐g‐silane‐blend‐org‐MMT nanocomposites; however, for HDPE‐blend‐org‐MMT composites I₃ decreases. It is found that HDPE composites with good dispersion can be obtained following appropriate modification of the HDPE. And silane grafting has an effect on the free volume of the HDPE nanocomposites. Copyright © 2007 Society of Chemical Industry     

Synthesis and characterization of poly(butylene terephthalate) nanocomposite fibers: Thermo‐mechanical properties and morphology

Nanocomposites of poly(butylene terephthalate) (PBT) with the organoclay C₁₂PPh‐MMT were prepared using in situ intercalation polymerization. Hybrids with various organoclay contents were processed for fiber spinning to examine their thermal behavior, tensile mechanical properties, and morphologies for various draw ratios (DRs). The thermal properties (T_g, T_m, and T_Dⁱ) of the hybrid fibers were found to be better than those of pure PBT fibers and were unchanged by variation of the organoclay loading up to 2 wt %. However, these thermal properties remained unchanged for DRs ranging from 1 to 18. Most clay layers were dispersed homogeneously in the matrix polymer, although some clusters were also detected. The tensile properties of the hybrid fibers increased gradually with increasing C₁₂PPh‐MMT content at DR = 1. However, the ultimate strengths and initial moduli of the hybrid fibers decreased markedly with increasing DR. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 1247–1254, 2006     

Effect of organic modifiers and silicate type on filler dispersion,thermal, and mechanical properties of ABS‐clay nanocomposites

Acrylonitrile–butadiene–styrene (ABS)–clay composite and intercalated nanocomposites were prepared by melt processing, using Na‐montmorillonite (MMT), several chemically different organically modified MMT (OMMT) and Na‐laponite clays. The polymer–clay hybrids were characterized by WAXD, TEM, DSC, TGA, tensile, and impact tests. Intercalated nanocomposites are formed with organoclays, a composite is obtained with unmodified MMT, and the nanocomposite based on synthetic laponite is almost exfoliated. An unintercalated nanocomposite is formed by one of the organically modified clays, with similar overall stack dispersion as compared to the intercalated nanocomposites. T_g of ABS is unaffected by incorporation of the silicate filler in its matrix upto 4 wt % loading for different aspect ratios and organic modifications. A significant improvement in the onset of thermal decomposition (40–44°C at 4 wt % organoclay) is seen. The Young's modulus shows improvement, the elongation‐at‐break shows reduction, and the tensile strength shows improvement. Notched and unnotched impact strength of the intercalated MMT nanocomposites is lower as compared to that of ABS matrix. However, laponite and overexchanged organomontmorillonite clay lead to improvement in ductility. For the MMT clays, the Young's modulus (E) correlates with the intercalation change in organoclay interlayer separation (Δd₀₀₁) as influenced by the chemistry of the modifier. Although ABS‐laponite composites are exfoliated, the intercalated OMMT‐based nanocomposites show greater improvement in modulus. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Dynamic mechanical,thermal, and morphological properties of silane‐treated montmorillonite reinforced polycarbonate nanocomposites

Three different loading of 3‐aminopropyltriethoxysilane (APS) was used to modify the Na‐montmorillonite via cation exchange technique. The Na‐MMT and silane‐treated montmorillonite (STMMT) were melt‐compounded with polycarbonate (PC) by using Haake Minilab machine. The PC nanocomposite samples were prepared by using Haake Minijet injection molding technique. The intercalation and exfoliation of the PC/MMT nanocomposites were characterized by using X‐ray diffraction (XRD) and transmission electron microscopy (TEM). The thermal properties of the PC nanocomposites were investigated by using dynamic mechanical analyzer and thermogravimetry analyzer. XRD and TEM results revealed partial intercalation and exfoliation of STMMT in PC matrix. Increase of APS concentration significantly enhanced the storage modulus (E′) and improved the thermal stability of PC nanocomposites. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Preparation and characterization of polyimide nanocomposites with different organo‐montmorillonites

Poly(amic acid) nanocomposites were synthesized from a dimethylacetamide (DMAc) solution with two organophilic montmorillonites (organo‐MMTs). It was then heated at various temperatures under vacuum, yielding 15–20 um thick films of polyimide/organo‐MMT hybrid with different clay contents (1–8 wt%). Dodecy‐lamine (C₁₂‐) and hexadecylamine (C₁₆‐) were used as aliphatic alkylamines in organo‐MMT. The ultimate strength monotonically increased with increasing clay content in the polymer matrix. Maximum enhancement in the initial modulus was observed for the blends containing 2 wt% clay with two kinds of organo‐clays, and values did not alter significantly with further increases in clay content. Additions of only 2 wt% C₁₂‐ and C₁₆‐MMT to the polyimide were shown to cause 94%‐95% reduction in oxygen gas permeability. This is caused by the barrier properties of the clay layers dispersed in the composite. In general, C₁₆‐MMT is more effective than C₁₂‐MMT in increasing both the tensile property and the gas barrier in a polyimide matrix. Intercalations of the polymer chains in clay were examined through wide‐angle X‐ray diffraction (XRD) and electron microscopies (SEM and TEM).     

Synthesis of poly(butyl acrylate‐co‐methyl methacrylate)/montmorillonite waterborne nanocomposite via semibatch emulsion polymerization

Poly(butyl acrylate‐co‐methyl methacrylate)‐montmorillonite (MMT) waterborne nanocomposites were successfully synthesized by semibatch emulsion polymerization. The syntheses of the nanocomposites were performed in presence of sodium montmorillonite (Na‐MMT) and organically modified montmorillonite (O‐MMT). O‐MMT was used directly after the modification of Na‐MMT with dimethyl dioctadecyl ammonium chloride. Both Na‐MMT and O‐MMT were sonified to obtain nanocomposites with 47 wt % solids and 3 wt % Na‐MMT or O‐MMT content. Average particle sizes of Na‐MMT nanocomposites were measured as 110–150 nm while O‐MMT nanocomposites were measured as 200–350 nm. Both Na‐MMT and O‐MMT increased thermal, mechanical, and barrier properties (water vapor and oxygen permeability) of the pristine copolymer explicitly. X‐ray diffraction and transmission electron microscope studies show that exfoliated morphology was obtained. The gloss values of O‐MMT nanocomposites were found to be higher than that of the pristine copolymer. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42373.     

Synthesis and characterization of poly(methyl methacrylate)/montmorillonite nanocomposites by in situ bulk polymerization

Poly(methyl methacrylate)/montmorillonite (MMT) nanocomposites were prepared by in situ bulk polymerization. The results showed that the silicone coupling agent affected the structure and properties of hybrid materials. XRD analysis showed that the dispersion of clay in nanocomposites with silicone‐modified organophilic MMT was more ordered than that in nanocomposites with unmodified organophilic MMT. The glass transition temperature (T_g) of the nanocomposites was 6–15°C higher and the thermal decomposition temperature (T_d) was 100–120°C higher than those of pure PMMA. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 2256–2260, 2003     

Waste polystyrene foam‐graft‐acrylic acid/montmorillonite superabsorbent nanocomposite

A novel superabsorbent nanocomposite based on partially neutralized acrylic acid, waste polystyrene foam, and sodium type montmorillonite (Na‐MMT) powder was synthesized through emulsion polymerization using N, N′‐methylenebisacrylamide as a crosslinker, 2,2′‐azo‐bisiso‐butyronitrile, ammonium persulfate, and sodium sulfite as mixed redox initiators. The effects of such factors as amount of Na‐MMT, crosslinker, initiator, and neutralization degree on water absorbency of the superabsorbent were investigated. The composites were characterized by Fourier transform infrared spectroscope, X‐ray diffraction, thermo gravimetric analysis, and scanning electron microscope. The results show that acrylic acid monomer successfully grafted onto the polystyrene chain, the layers of Na‐MMT were exfoliated and dispersed in the composite at nano size after copolymerization. The introduction of waste polystyrene foam in the composite increased the water absorbency rate. The addition of Na‐MMT not only enhanced the thermal stability of the composites but also increased its water absorbency, and the optimal water absorbencies of distilled water and saline water (w_NaCl = 0.9%) of the nanocomposites were more than 1180 g H₂O/g and 72.6 g H₂O/g, respectively. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 2341–2349, 2007     

Polyindene/organo‐montmorillonite conducting nanocomposites. I. Synthesis,characterization, and electrokinetic properties

In this study, Na‐montmorillonite was organically modified with cetyltrimethylammoniumbromide (CTAB) and intercalated with in‐situ polymerized indene. Polyindene(PIn)/Organo‐MMT nanocomposites were obtained with three different compositions and coded as: K1: [PIn(94.5%)/O‐MMT(5.5%)], K2: [PIn(92.8%)/O‐MMT(7.2%)], and K3: [PIn(87.9%)/O‐MMT(12.1%)]. These nanocomposites were subjected to full characterization with various techniques. Electrokinetic studies were conducted to reveal the zeta (ζ)‐potential characteristics of the nanocomposites. ζ‐potentials of the materials were observed to decrease with increasing O‐MMT content. The cationic (CTAB) and anionic (sodium dodecylsulfate) surfactants were shifted the ζ‐potentials of the colloidal dispersions to more positive and more negative regions, respectively whereas nonionic surfactant (Triton X‐100) caused almost no change. The pH and temperature were observed to shift the ζ‐potential values of the nanocomposites to more negative and slightly more positive regions, respectively. With the addition of mono (NaCl), di (BaCl₂) and three (AlCl₃) valent salts, the ζ‐potential of the nanocomposites were shifted to more negative, more positive, and much more positive regions, respectively. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

PE/OMMT nanocomposites prepared by in situ polymerization approach: Effects of OMMT‐intercalated catalysts and silicate modifications

In this article, the surfactants, (2‐hydroxylethyl) octadecyl dimethylammonium nitrate (OH‐C18), hexadecyltrimethylammonium bromide(C16), and mixture of trimethylchlorosilane (TM) and OH‐C18 were ion‐exchanged with cations in the montmorillonite (MMT) to generate three organic MMTs (named as OH‐C18‐MMT, C16‐MMT, and MMMT), leading to different environments of catalyst species in MMT interlayer gallery. Et[Ind]₂ZrCl₂ (abbreviated as EI) was supported on the above three types of OMMTs to prepare the PE/OMMT nanocomposites via in situ polymerization. By contrast, EI/MMMT showed higher activity than EI/OH‐C18‐MMT and EI/C16‐MMT under the same polymerization conditions. The other two types of catalysts, such as [(tert‐Bu)NSi(Me₂)C₅Me₄]TiCl₂ (CGCT) and Bis[N‐(3‐tert‐butylsalicylidene)anilinato] titanium (IV) dichloride (FI) were also supported on the OH‐C18‐MMT for in situ ethylene polymerization. It was found that the activity of FI/OH‐C18‐MMT for ethylene polymerization was much lower than the other two corresponding catalysts under the similar reaction conditions. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Synthesis and properties of poly(methyl methacrylate)/clay nanocomposites using natural montmorillonite and synthetic Fe‐montmorillonite by emulsion polymerization

In this article, Fe‐montmorillonite (Fe‐MMT) was synthesized by hydrothermal method. For the first time, Fe‐MMT was modified by cetyltrimethyl ammonium bromide (CTAB), and poly(methyl methacrylate)(PMMA)/Fe‐MMT nanocomposites were synthesized by emulsion polymerization. Then poly(methyl methacrylate)(PMMA)/natural montmorillonite (Na‐MMT) and PMMA/Fe‐MMT nanocomposites were compared by Fourier transform infrared (FTIR) spectra, X‐ray diffraction (XRD) patterns, transmission electron microscopy (TEM), and thermal gravimetric analysis (TGA). By XRD and TEM, it was found out that the morphology of PMMA/Fe‐MMT nanocomposites was different from that of the PMMA/Fe‐MMT nanocomposites when the content of two types of clay was same in the PMMA matrix. It was possible that the presence of iron may lead to some radical trapping, which enhances intragallery polymerization to be developed to improve layer dispersion in PMMA/Fe‐MMT systems. In TGA curves, the thermal stability and residue at 600°C of PMMA/Fe‐MMT nanocomposites were higher than those of PMMA/Na‐MMT nanocomposites. Those dissimilarities were probably caused by structural Fe ion in the lattice of Fe‐MMT. POLYM. COMPOS., 27:49–54, 2006. © 2005 Society of Plastics Engineers     

Effect of polymethylmethacrylate–montmorillonite nanocomposite on the release of some biologically active 1,2,4‐triazine derivatives

Methylmethacrylate chloromethylstyrene copolymer–montmorillonite (PMMA–MMT) intercalated nanocomposite was prepared by bulk copolymerization of methylmethacrylate (MMA) and chloromethylstyrene (2 wt%) followed by phosphonium salt formation. The intercalation of polymeric phosphonium salt into montmorillonite was achieved through an ion exchange process between sodium cations in MMT and phosphonium groups attached to the copolymer. Thermogravimetric analysis (TGA) showed improved thermal stability for the intercalated nanocomposite in comparison with the pure PMMA. Biologically active compounds including 4‐amino‐6‐methyl‐3‐thioxo‐3,4‐dihydro‐2H‐[1,2,4]triazin‐ 5‐one (I), 4‐amino‐6‐methyl‐3,4‐dihydro‐2H‐[1,2,4]triazin‐3,5‐dithione (II), 4‐amino‐6‐(4‐methoxystyryl)‐3‐thioxo‐3,4‐dihydro‐2H‐[1,2,4]triazin‐5‐one (III), and 4‐amino‐6‐styryl‐3‐thioxo‐3,4‐dihydro‐2H‐[1,2,4]triazin‐5‐one (IV) have been prepared and reacted with PMMA–MMT intercalates and ion exchanged with sodium montmorillonite (MMT) in the presence of HCl. Infrared spectra (IR) show bands characteristic to amide linkage between triazine derivatives and PMMA. These nanocomposites have been characterized by X‐ray diffraction (XRD) and transmission electron microscope (TEM). The release of biologically active compounds intercalated layered silicates is controllable and these materials have a great potential as a delivery host in the pharmaceutical field. The effect of temperature and presence of saline solution on the release was studied. POLYM. COMPOS., 2009. © 2008 Society of Plastics Engineers