Separation and spectral data of the six isomeric ozonides from methyl oleate

The structures of the products obtained on ozonation of methyl oleate have been re-examined. The assignments for the six isomeric ozonides of methyl oleate have been made by¹H and¹³C nuclear magnetic resonance (NMR), which were consistent with the retention times observed in high-performance liquid chromatography; the assignments were confirmed by mass and infrared spectroscopy. Two triplets for the ozonide ring protons of thecis andtrans isomers in the normal (MOO1) and the two cross ozonides (MOO1 and MOO3) can be resolved by 400 MHz NMR. For MOO1 and MOO3, where the two ring carbons are equivalent, two peaks for the ring carbons of each cross ozonides are resolved in the¹³C NMR spectra, one for thecis and one for thetrans isomer. For MOO2, four peaks for the ring carbons are resolved in the¹³C NMR spectra, two for thecis and two for thetrans isomer.     

Preparation of poly(amic acid) and polyimide derived from 3,3′,4,4′‐benzophenonetetracarboxylic dianhydride with different diamines by microwave irradiation

Polycondensation‐type poly(amic acid) (PAA) was synthesized with 3,3′,4,4′‐benzophenonetetracarboxylic dianhydride as a dianhydride monomer and 4,4′‐diaminodiphenylmethane and 4,4′‐oxydianiline as diamine monomers under microwave irradiation in dimethylformamide. Then, PAA was used to make polyimide (PI) by imidization at a low temperature. The structure and performance of the polymers were characterized with Fourier transform infrared (FTIR), proton nuclear magnetic resonance (¹H‐NMR), viscosity, X‐ray diffraction (XRD), and thermogravimetry (TG) curve analyses. The FTIR spectra of the polymers showed characteristic peaks of PI around 1779 and 1717 cm^?1. The ¹H‐NMR spectrum of PAA indicated a singlet at 6.55 ppm assigned to ? NHCO? and a singlet at 10.27 ppm assigned to carboxylic acid protons. The XRD spectrum demonstrated that the obtained PI had a low‐order aggregation structure with a d‐spacing of 0.5453 nm. The TG results revealed that the PI was thermally stable with 10% weight loss at 565°C in an N₂ atmosphere. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2008     

六烯丙基六氮杂异伍兹烷的核磁表征

为精确表征六烯丙基六氮杂异伍兹烷(HAIW)的化学结构,在氘代氯仿(CDCl3)及氘代丙酮(acetone-d6)中研究了HAIW的核磁谱图特征。采用一维及二维1 H、13 C、15 N NMR技术对HAIW的NMR信号进行了全归属,利用核磁模拟软件NMR-SIM对氢谱图进行计算机拟合。结果表明,HAIW在丙酮溶液中的1 H NMR的分辨率较好,谱图中存在两类异伍兹烷信号(环内与桥头)及两类烯丙基碳氢信号,其中五元环所连4个烯丙基不能自由旋转导致亚甲基氢不对称出现2组峰,而六元环所连2个烯丙基则能自由旋转使得该亚甲基氢对称重合;两类烯丙基存在的多种偶合使得氢谱谱线较为复杂;由拟合氢谱化学位移及偶合常数获得的1 H NMR谱图与实际图谱完全一致。表明二维核磁共振技术与核磁模拟技术相结合,可用于对复杂谱的精确分析。     

1H n.m.r. spectra of ring-opened polymers of 1-methylbicyclo[2.2.1]hept-2-ene

¹H n.m.r. spectra of the title polymers containing 0%, 57% and 100% cis double bonds and having various degrees of head-tail (HT) bias have been analysed. The olefinic protons give distinct signals for HH, HT and TT trans dyads, also for HT and TT cis dyads, but HH cis dyads are not present in any polymer. The ring protons adjacent to the double bonds also give distinct cis and trans signals as do the methyl protons. The latter give four lines, assigned to cc, ct, tc and tt double bond pairs, and their intensities indicate a somewhat blocky cis/trans distribution for polymers having a high cis content. There is no fine structure which can be positively assigned to ring tacticity effects.     

Spectroscopic Characterization of Ozonated Sunflower Oil

Ozonation reactions are very important in vegetable oil chemistry since their ozonation products are involved in antimicrobial effect in therapeutical uses for several microbiological etiology diseases. Information on the spectroscopic characterization of the products generated by ozonolysis of sunflower oil is limited. In the present study ozonized sunflower oil with 650 mmol-equiv/kg of peroxide index is chemically characterized. Ozonation of sunflower oil produced ozonides, aldehydes and hydroperoxides which were identified by ¹H, ¹³C and two-dimensional ¹H Nuclear Magnetic Resonance (NMR). The virgin sunflower oil and ozonized sunflower oil show very similar ¹H NMR spectra except for the resonances at δ = 9.74 and δ = 9.63 ppm that correspond to both triplet from aldehydic protons, δ = 5.6 ppm (olefinic signal from hydroperoxides), and δ = 5.15 ppm (multiplet from ozonides methylic protons). Other resonance assignments are based on the connectivities provided by the proton scalar coupling constants. These are the following: δ = 3.15 ppm (doublet from methylenic group in α position respect to olefinic proton), δ = 2.45 ppm (multiplet from methylenic group allylic to ozonides methynic protons) and δ = 1.62 ppm (multiplet methylenic protons in β position respect to ozonides methynic protons). From the ¹³C NMR and ¹H-¹³C two- dimensional spectrum of the ozonized sunflower oil, the presence of ozonides was confirmed by the signals δ = 103.43 and δ = 103.49 ppm, respectively. The others new signals found in δ = 42.5 and δ = 42.76 ppm confirm the presence of methylenic carbons from hydroperoxides and ozonides. These results indicate that NMR Spectroscopy can provide valuable information about the amount of reaction compounds of ozonized vegetable oil. From the chemical structural elucidation of ozonated sunflower oils, relevant biochemical and chemical information can be achieved.     

Ring location in cyclopropane fatty acid esters by boron trifluoride-catalyzed methoxylation followed by mass spectroscopy

Methyl esters of methylcis- andtrans-9,10-methyleneoctadecanoic acids react with 50% boron trifluoride-methanol to produce unsaturated and methoxy-esters; both products are shown by gas chromatography to be a mixture of several isomers. Mass spectra of the methoxylated esters are characterized by intense peaks due to cleavage adjacent to methoxy-functions which allow the position of the ring in the original cyclopropane ester to be easily assigned. Methyl oleate is also partially attacked by 50% BF₃−MeOH to produce a mixture of methyl 9- and 10-methoxyoctadecanoates. 14% BF₃−MeOH does not react with cyclopropane and olefinic esters under the reaction conditions employed.     

Disecondary amine synthesis and its reaction kinetics with epoxy prepolymers

3,3′‐Diaminodiphenyl sulfone (3,3′‐DDS) was reacted with acetaldehyde in the presence of sodium triacetoxy borohydride via reductive amination to yield a 3,3′‐DDS based secondary diamine, N,N′‐diethyl‐3,3′‐diaminodiphenyl sulfone. Near IR analysis indicated that the 5060 cm^?1 peak for primary amine (? NH₂) in 3,3′‐DDS was absent in the reaction product spectrum. The ? NH₂ proton peak at δ 5.66 ppm shifted to δ 6.16 ppm in the product. Methyl and methylene protons of CH₃? CH₂? NH? Ph? group were observed at δ 3.01 and 1.12 ppm, respectively, in the product. The carbon NMR spectrum of the reaction product showed new peaks at δ 37.46 and 14.47 ppm that further confirmed secondary amine formation. The liquid chromatography coupled mass spectra peaks at 248–250 for 3,3′‐DDS and 304 for the reaction product further supported the formation of N,N′‐diethyl‐3,3′‐diaminodiphenyl sulfone. A blend of N,N′‐diethyl‐3,3′‐diaminodiphenyl sulfone with diglycidyl ether of bisphenol‐A (DGEBA) epoxy prepolymer started reacting at about 110–125°C surpassing an energy barrier of ～ 66 kJ/mol as determined via differential scanning calorimetry analysis. Reaction kinetics were characterized via near IR spectroscopy specific to the reaction between secondary amine and DGEBA epoxy prepolymer. The results confirmed >97% conversion at a cure protocol of 5 h at 80°C, 5 h at 100°C, 11 h at 125°C, and 6 h at 185°C. N,N′‐diethyl‐3,3′‐diaminodiphenyl sulfone‐DGEBA thermoplastics displayed tensile and flexural modulii of 3.08 and 2.86 GPa, respectively, and glass transition temperature (T_g) of 120.77°C. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Determination of positional distribution of butyryl groups in milkfat triacylglycerols,triacylglycerol mixtures,and isolated positional isomers of triacylglycerols by gas chromatography and1H nuclear magnetic resonance spectroscopy

Positional isomers (1-butyryl-2X-3Y-rac-glycerol and 2-butyryl-1X-3Y-rac-glycerol;X,Y=long-chain acyls) of saturated triacylglycerols (TAG) with 34 and 40 acyl carbons were shown to separate in two chromatographic peaks on immobilized phenyl(65%) methylsilicone column by gas-liquid chromatography, and on reversed-phase ODS-1 column by high-performance liquid chromatography. The analysis of 500-MHz¹H nuclear magnetic resonance (NMR) spectra showed distinct differences between 2-butyryl-1X-3Y-rac-glycerol and 1-butyryl-2X-3Y-rac-glycerol isomers in the resonance signals of methylene and methine protons of glycerol backbone, and carbon-2 methylene of acyl groups, and methyl protons of butyryl group. The¹H NMR spectra of three interesterified mixtures of three monoacid TAG containing saturated butyrate and caproate TAG and unsaturated butyrate TAG showed that triplets of methyl protons of butyryl groups atsn-1(3)- andsn-2-positions in saturated and unsaturated TAG had similar chemical shifts and that the chemical shift of caproyl methyl protons was different from those of butyryl methyl protons. The positional distribution of butyryl groups in isolated positional isomers of butyrate TAG, interesterified TAG mixtures, and natural and interesterified butteroil can be determined by integration of these signals.     

Stereochemical assignments of the nuclear magnetic resonance spectra of isobornyl acrylate/methacrylonitrile copolymers

Isobornyl acrylate (B)/methacrylonitrile (N) copolymers with different compositions were synthesized by the free‐radical bulk polymerization with azobisisobutyronitrile as the initiator under a nitrogen atmosphere at 70°C. The copolymer compositions were calculated from quantitative ¹³C(¹H)NMR spectra. The reactivity ratios of the comonomers in the B/N copolymers determined from the linear Kelen–Tudos method and nonlinear error‐in‐variable method were r_B = 0.66 ± 0.11 and r_N = 1.54 ± 0.22 and r_B = 0.74 and r_N = 1.65, respectively. The complete spectral assignments of the ¹H‐NMR and ¹³C(¹H)‐NMR spectra were carried out with the help of distortionless enhancement by polarization transfer, two‐dimensional (2D) heteronuclear single quantum coherence, and 2D total correlation spectroscopy. The nitrile carbon of the N unit and the methine and OCH carbons of the B unit were assigned to triad compositional sequences, whereas the β‐methylene carbons of the B and N units were assigned to the tetrad compositional and configurational sequences. The α‐methyl carbon of the N unit was also assigned to the triad level of configurational and compositional sequences. Similarly, the nitrile and quaternary carbon resonances with the methine, methylene, and methyl protons were studied in detail with 2D heteronuclear multiple‐bond correlation spectra. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Sequence analysis of poly(ethylene/1,4-cyclohexanedimethylene terephthalate) copolymer using H and C NMR

The triad-level sequence analysis of poly(ethylene/1,4-cyclohexanedimethylene terephthalate) copolymer was reported in a solvent system of o-chlorophenol/deuterated chloroform mixture (50/50 v/v) at 80 °C using 600 MHz ¹H NMR. The well-resolved alcoholic CH₂ proton peak of the glycol units was observed, which made the detailed sequence analysis possible. The peaks of the cis- and trans-forms of the 1,4-cyclohexanedimethylene glycol units were split into the triad sequence in the chain and could be assigned by a comparison of the spectra with those of homopolymers and by an additional two-dimensional heteronuclear multiple bond correlation observation. The triad sequence distributions centered on 1,4-cyclohexanedimethylene glycol units were determined, which was independent of the cis- and trans-forms of the units and controlled according to Bernoullian statistics.     

Determination of the tacticity of ring-opened metathesis polymers of norbornene and norbornadiene by 13C NMR spectroscopy of their hydrogenated derivatives

The 125 MHz ¹³C nuclear magnetic resonance (NMR) spectra of the hydrogenated derivatives of ring-opened metathesis polymers (ROMP) of bicyclo[2.2.1]hept-2-ene (norbornene) and bicyclo[2.2.1]hepta-2,5-diene (norbornadiene) prepared using a range of initiators, have been analysed in detail. The signals due to the methylene carbon atoms in the enchained cyclopentyl rings of these polymers show fine structure which is assigned to m and r ring dyads and mm, mr/rm and rr ring triads, enabling the tacticity of the hydrogenated polymer, and thus of the polyolefin precursor, to be determined for high-cis or high-trans polymers. Novel methods for making high-cis polymers are described and solvent-dependent variations in the stereospecificity of the propagation reaction have been observed.     

Comparative analysis of different properties of polyhydroxyalkanoates isolated from two different bacterial strains: Alkaliphilus oremlandii OhILAs and recombinant Escherichia coli XL1B

We synthesized poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) [P(3‐HB‐co‐3‐HV)] copolymer having different contents of 3‐hydroxyvalerate (3‐HV) units (16.04, 16.3, 24.95, 25.62, and 16.52 mol % 3‐HV) with different yields of polyhydroxyalkanoates (PHAs) by feeding with different cooking oils and with Alkaliphilus oremlandii OhILAs strain. The PHA production efficiency of the Alkaiphilus strain was compared with that of the control strain, Bacillus cereus. The synthesis of each PHA biopolymer was performed with different toxic spent oils as the sole carbon source in an oil‐in‐water‐based microemulsion medium. We observed that the productivity of the poly(3‐hydroxybutyrate) [P(3‐HB)] copolymer from the Alkaliphilus strain was higher than those of the PHAs isolated from B. cereus and the Escherichia coli XL1B strain. The synthesized PHA copolymers were characterized by ¹H‐NMR and Fourier transform infrared (FTIR) spectroscopy. In the ¹H‐NMR spectra, a doublet resonance peak at 1.253 ppm of the/ methyl protons of the 3‐hydroxybutyrate (3‐HB) side group and one at 0.894 ppm due to the methyl protons of the 3‐HV side group indicated the presence of 3‐HB and 3‐HV units in the copolymer. The chemical shift values at 1.25 and 2.2 ppm, due to the resonance absorption peaks of the methyl protons and methylene protons, confirmed the synthesis of the P(3‐HB) homopolymer. From the FTIR spectra, a strong C?O stretching frequency in the range of 1745–1727 cm^?1, together with strong C? O stretching bands near 1200 cm^?1 and a strong band near 3400 cm^?1, confirmed the synthesis of P(3‐HB‐co‐3‐HV) and P(3‐HB). Thus, waste cooking oil as a substrate provided an alternate route for the formation of P(3‐HB‐co‐3‐HV) and P(3‐HB) by Alkaliphilus and E. coli strains, respectively. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 41080.     

Theoretical and Experimental Spectroscopic Analysis of Cyano-Substituted Styrylpyridine Compounds

A combined theoretical and experimental study on the structure, infrared, UV-Vis and ¹H NMR data of trans-2-(m-cyanostyryl)pyridine, trans-2-[3-methyl-(m-cyanostyryl)] pyridine and trans-4-(m-cyanostyryl)pyridine is presented. The synthesis was carried out with an efficient Knoevenagel condensation using green chemistry conditions. Theoretical geometry optimizations and their IR spectra were carried out using the Density Functional Theory (DFT) in both gas and solution phases. For theoretical UV-Vis and ¹H NMR spectra, the Time-Dependent DFT (TD-DFT) and the Gauge-Including Atomic Orbital (GIAO) methods were used, respectively. The theoretical characterization matched the experimental measurements, showing a good correlation. The effect of cyano- and methyl-substituents, as well as of the N-atom position in the pyridine ring on the UV-Vis, IR and NMR spectra, was evaluated. The UV-Vis results showed no significant effect due to electron-withdrawing cyano- and electron-donating methyl-substituents. The N-atom position, however, caused a slight change in the maximum absorption wavelengths. The IR normal modes were assigned for the cyano- and methyl-groups. ¹H NMR spectra showed the typical doublet signals due to protons in the trans position of a double bond. The theoretical characterization was visibly useful to assign accurately the signals in IR and ¹H NMR spectra, as well as to identify the most probable conformation that could be present in the formation of the styrylpyridine-like compounds.     

Studies on the nuclear magnetic resonance spectra of olefinic protons of conjugated fatty acid methyl esters

The NMR spectra of olefinic protons in the four representative conjugated fatty acid methyl esters, methylcis-9,trans-11-octadecadienoate, methyltrans-9,trans-11-octadecadienoate, methyl α eleostearate, and methyl β eleostearate, were studied. The chemical shift of each olefinic proton in these compounds was determined by considering their intramolecular environment. Coupling constants were also obtained as the results of spectral analysis.     

Solvent effects on the nuclear magnetic resonance spectra of methyl hydroxystearates

High resolution NMR spectra of all the isomeric methyl hydroxystearates have been measured in carbon tetrachloride, pyridine, and quinoline. As a result of association with the solvent, spectra in pyridine, and particularly in quinoline, are considerably different from those in carbon tetrachloride. The two pairs of methylene groups on either side of the CHOH grouping are deshielded by the associated solvent molecule giving a new signal at 1.58 ppm in pyridine, and at 1.75 ppm in quinoline. Deshielding of the terminal CH₃ occurs in isomers with hydroxyl near the methyl end, and of the methylene alpha to the ester group in isomers with hydroxyl near the ester end of the chain. When the spectra of isomers substituted near the center of the chain are observed in quinoline, the major methylene signal is split into two peaks due to differential shielding by the solvent. The differences between the spectra of each isomer measured in quinoline are sufficiently large for use as a method of identification. Issued as NRC No. 9320. Presented at the AOCS Meeting in Cincinnati, October 1965.     

Cis and trans components of lipids: Analysis by 1H NMR and silver shift reagents

In this study, the methodology of shift reagents was exploited to distinguish cis and trans unsaturation in oils and fats. The differential binding of silver ions (in the form of AgFOD) to cis and trans double bonds allowed the separation of the allylic and olefinic proton signals in the ¹H NMR spectra of mixtures of cis and trans methyl esters of monoene aliphatic acids and unsaturated triacylglycerol mixtures at low frequency spectrometers (300 MHz). Careful integration of the appropriate proton resonances in the recorded quantitative ¹H NMR spectra afforded percentage concentrations in very good agreement with the actual values. This ¹H NMR methodology was validated by analyzing AOCS Laboratory Proficiency Program GC samples containing various percentages of saturated, cis‐mono unsaturated, and cis‐polyunsaturated fat as well as trans content. This fast and relatively low‐cost NMR methodology could be used on line for obtaining nutrition labeling compositional data (NLCD) required for fat‐containing food products. Attempts to differentiate lipid molecules with different degree of unsaturation and positional distribution of cis double bonds were unsuccessful.     

Microstructure analysis of poly(styrene‐co‐vinylidene chloride) copolymers by NMR spectroscopy

Poly(styrene‐co‐vinylidene chloride) (S/V) copolymers were prepared by free‐radical photopolymerization using uranyl nitrate as an initiator. The microstructure of the copolymer S/V was investigated by ¹H‐ and ¹³C{¹H}‐NMR, ¹H–¹³C‐heteronuclear shift quantum correlation (HSQC) NMR, and homonuclear total correlated spectroscopy (TOCSY). The ¹H‐NMR spectra of the copolymers is complex due to overlapping resonance signals of the various triad configurations. Assignments were made up to the triad and tetrad levels for the methylene and methine regions using two‐dimensional HSQC experiments. A ¹³C‐distortionless enhancement by polarization transfer (DEPT) spectrum was used to differentiate between the carbon resonance signals of methine and the methylene units. The geminal couplings in the methylene protons and vicinal coupling between the methine and methylene protons were detected from the TOCSY spectra. Monte Carlo simulations were used to investigate the effect of the degree of polymerization on the triad fractions. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 79: 544–554, 2001     

Hydroperoxide formation during autoxidation of conjugated linoleic acid methyl ester

The aim of this study was to investigate whether hydroperoxides are formed in the autoxidation of conjugated linoleic acid (CLA) methyl ester both in the presence and absence of α‐tocopherol. The existence of hydroperoxide protons was confirmed by D₂O exchange and by chemoselective reduction of the hydroperoxide groups into hydroxyl groups using NaBH₄. These experiments were followed by nuclear magnetic resonance (NMR) spectroscopy. The ¹³C and ¹HNMR spectra of a mixture of 9‐hydroper‐oxy‐10‐trans,12‐cis‐octadecadienoic acid methyl ester (9‐OOH) and 13‐hydroperoxy‐9‐cis, 11‐trans‐octadecadienoic acid methyl ester (13‐OOH), which are formed during the autoxidation of methyl linoleate, were studied in detail to allow the comparison between the two linoleate hydroperoxides and the CLA methyl ester hydroperoxides. The ¹³CNMR spectra of samples enriched with one of the two linoleate hydroperoxide isomers were assigned using 2D NMR techniques, namely Correlated Spectroscopy (COSY), gradient Heteronuclear Multiple Bond Correlation (gHMBC), and gradient Heteronuclear Single Quantum Correlation (gHSQC). The ¹³C and ¹H NMR experiments performed in this study show that hydroperoxides are formed during the autoxidation of CLA methyl ester both in the presence and absence of α‐tocopherol and that the major isomers of CLA methyl ester hydroperoxides have a conjugated monohydroperoxydiene structure similar to that in linoleate hydroperoxides.     

Boron-modified phenolic resins for high performance applications

A boron-modified phenolic resin (BPR) that flows at usable processing temperatures was prepared from the solvent-less reaction of triphenyl borate (TPB) and paraformaldehyde (PF). The reaction of TPB and PF was performed at three different resinifying temperatures, 130, 120 and 90 °C. The BPR produced at 90 °C melted upon reheating, which indicated promising processing applications for this resin. ¹H and ¹³C NMR spectra of resins from the three resinifying temperatures had the same pattern of absorptions. Substitution of methylol groups occurred at the ortho and para positions of the ester phenyl rings (4.86-4.75 ppm). Aromatic, methylene and ether linkage protons were assigned at about 7.45-6.74, 4.93-3.36 and 5.30-4.91 ppm, respectively. The synthesis of BPR from the reaction phenolic resins, produced under basic conditions (resoles) and boric acid was not feasible. The reactivity of the resoles species with each other is more favorable than that with boric acid.     

Photochemical production of conjugated linoleic acid from soybean oil

Conjugated linoleic acid (CLA), an anticarcinogenic compound with numerous other health benefits, is present mainly in dairy and beef lipids. The main CLA isomer present in dairy and beef lipids is cis 9, trans 11 CLA at a 0.5% concentration. The typical minimum human dietary intake of CLA is 10 times less than the 3 g/d suggested requirement that has been extrapolated from animal and cell-line studies. The objectives of this study were to produce CLA isomers from soybean oil by photoisomerization of soybean oil linoleic acid and to study the oxidation status of the oil. Refined, bleached, and deodorized soybean oil with added iodine concentrations of 0, 0.1, 0.25, and 0.5% was exposed to a 100-W mercury lamp for 0 to 120 h. An SP-2560 fused-silica capillary GC column with FID was used to analyze the esterified CLA isomers in the photoisomerized oil. The CLA content of the individual isomers was optimized by response surface methodology. Attenuated total reflectance (ATR)-FTIR spectra in the 3400 to 3600 cm⁻¹ range and ¹H NMR spectra in the 8 to 12 ppm range of the photoisomerized soybean oil were obtained to follow hydroperoxide formation. The largest amount of cis 9, trans 11 CLA isomer in soybean oil was 0.6%, obtained with 0.25% iodine and 84 h of photoisomerization. Lipid hydroperoxide peaks in the ATR-FTIR spectra and aldehyde peaks in the ¹H NMR spectra were not observed in the photoisomerized soybean oil, and the spectra were similar to that of fresh soybean oil. This study shows that CLA isomers can be produced simply and inexpensively from soybean oil by photoisomerization.