Recovery of [BMIM]FeCl4 from homogeneous mixture using a simple chemical method

[BMIM]FeCl₄ (1-butyl-3-methylimidazolium tetrachloroferrate) was successfully separated from a homogeneous mixture of [BMIM]FeCl₄ and H₂O via a simple two-step method of phase-division by adding inorganic salt plus chemical extraction, or alternatively, ultracentrifugation, or ultrastrong magnetic field. NaCl showed excellent and effective phase-dividing performance combined with chemical extraction method from the homogeneous mixture of [BMIM]FeCl₄ and H₂O lower to 1 v%.     

Fast Oxidative Removal of Refractory Aromatic Sulfur Compounds by a Magnetic Ionic Liquid

Magnetic ionic liquids (MIL) are extensively used in extraction and catalytic processes. Here, a series of MIL, i.e., 1‐n‐butyric acid‐3‐methylimidazolium chloride/xFeCl₃ ([C₃H₆COOHmim]Cl/xFeCl₃; x = 0.5, 1, 1.5, 2), were synthesized and characterized by infrared spectroscopy, visible absorption spectrometry, and electrospray ionization mass spectrometry. The MIL [C₃H₆COOHmim]Cl/2FeCl₃ was found to be highly active for the extraction and catalytic oxidative desulfurization of a model oil under mild conditions. Of note, the removal of benzothiophene, which has been regarded as a refractory aromatic sulfur compound, could be achieved at up to 100 % in 10 min. After reaction, the MIL could be easily separated from the model oil by applying an external magnetic field, due to its paramagnetic properties.     

1‐Allyl‐3‐methylimidazolium halometallate ionic liquids as efficient catalysts for the glycolysis of poly(ethylene terephthalate)

Series of 1‐allyl‐3‐methylimidazolium halometallate ionic liquids (ILs) were synthesized and used to degrade poly(ethylene terephthalate) (PET) as catalysts in the solvent of ethylene glycol. One important feature of these new IL catalysts is that most of them, especially [amim][CoCl₃] and [amim][ZnCl₃], exhibit higher catalytic activity under mild reaction condition, compared to the traditional catalysts [e.g., Zn(Ac)₂], the conventional IL catalysts (e.g., [bmim]Cl), Fe‐containing magnetic IL catalysts (e.g., [bmim][FeCl₄]), and metallic acetate IL catalysts (e.g., [Deim][Zn(OAc)₃]). For example, using [amim][ZnCl₃] as catalyst, the conversion of PET and the selectivity of bis(hydroxyethyl) terephthalate (BHET) reach up to 100% and 80.1%, respectively, under atmospheric pressure at 175°C for only 1.25 h. Another important feature is that BHET can be easily separated from the catalyst and has a high purity. Finally, based on the experimental phenomena, in ‐situ infrared spectra, and experimental results, the possible mechanism of degradation with synthesized IL is proposed. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Effects of 1-butyl-3-methylimidazolium tetrafluoroborate on the oxidation of glucose catalyzed by glucose oxidase

The effects of room temperature ionic liquids (ILs) on the conformation and electrocatalytic activity of enzymes were studied using glucose oxidase (GOx) and 1-butyl-3-methylimidazolium tetrafluoroborate ([bmim]BF₄) as models. UV-vis and circular dichroic (CD) spectra indicated that [bmim]BF₄ did not affect the conformation of the enzyme, and the secondary structure of GOx in [bmim]BF₄-PBS mixtures (the content of the IL is from 0 to 20 vol%) was essentially the same as that of the native one. The Raman spectra showed that no interaction existed between glucose and [bmim]BF₄. The oxidation of glucose catalyzed by GOx was investigated under a substrate-saturated condition in [bmim]BF₄-PBS mixtures using ferroceneacetic acid (FcA) as a mediator. The voltammetric results showed that electrocatalytic current (i_cat) decreased with the increase of the content of [bmim]BF₄ in the mixtures. The reason causing the decrease of i_cat was analyzed. The reduction in the diffusion rate of FcA due to the increase of the viscosity after the addition of the IL was a key factor of causing the decrease of i_cat. The results presented here will be useful for the designing of the related biosensor used in ILs-containing system.     

Tetrachloroferrate containing ionic liquids: Magnetic- and aggregation behavior

The magnetic behavior of a binary salt of tricaprylylmethylammonium tetrachloroferrate and tricaprylylmethylammonium chloride, [A336][FeCl₄]_0.73[Cl]_0.27, was evaluated. With a magnetic susceptibility of 0.011 emu mol^? 1 this binary salt exhibited a remarkable response to an external magnetic field. Dynamic light scattering (DLS) measurements allowed to study the aggregation behavior of [A336][FeCl₄]_0.73[Cl]_0.27 as well as of further magnetic ionic liquids [PR_6,6,6,14][FeCl₄] and (BMIM)[FeCl₄] in ethylacetate and ethanol.     

Study on ionic liquid [bmim]PF<Subscript>6</Subscript> and [hmim]PF<Subscript>6</Subscript> as plasticizer for PVC paste resin

Two kinds of room temperature ionic liquids, [bmim]PF₆ (1-butyl-3-methylimidazolium hexafluorophosphate) and [hmim]PF₆ (1-hexyl-3-methylimidazolium hexafluorophosphate), were respectively used as plasticizer for PVC paste resin. The mechanical properties, thermal and ultraviolet ray stabilities, and migration characteristics of the PVC paste resin samples were determined by universal testing machine, TG/DTA, and HPLC. The results showed that the tensile strength and elastic modulus decreased, the elongation at break and thermal stability of PVC paste resin membranes were improved with the increasing of [bmim]PF₆ or [hmim]PF₆ dosages. The immersed time and temperature could accelerate leaching and migration of plasticizers in plasticized PVC paste resin films. Moreover, the effect of solvent environment on migration amount was also studied.     

A study on synthesis and properties of Fe<Subscript>3</Subscript>O<Subscript>4</Subscript> nanoparticles by solvothermal method

Magnetic nanoparticles (Fe₃O₄) were synthesized by the solvothermal method using FeCl₃ · 6H₂O and ethylene glycol as a reactant. Powder X-ray diffraction, FT-IR, TEM, SEM, and VSM were used to characterize the magnetic particles. The reacting factors, such as reacting time, the concentration of iron source and surfactant, especially the effect of NaAc · 3H₂O, were studied. The results indicated that NaAc · 3H₂O plays the role not only as a dispersant but also a structure-directing agent. The synthesized Fe₃O₄ particles showed excellent magnetic property, which made them have potential for application in magnetic nanodevices and biomedicine.     

Negative effect of [bmim][PF6] on the catalytic activity of alcohol dehydrogenase: mechanism and prevention

BACKGROUND: [bmim][PF₆] is a hydrophobic ionic liquid which could be considered as an environmentally friendly solvent for biocatalysis. In pure [bmim][PF₆], however, alcohol dehydrogenase from yeast (YADH) has no catalytic activity. The aim of the present work was (1) to quantitatively study the negative effect of [bmim][PF₆] on the catalytic activity of YADH and the related mechanism and (2) to made an attempt to lessen the negative effect of [bmim][PF₆] on YADH by microemulsifying [bmim][PF₆]. RESULTS: The activity of YADH in the homogeneous solution formed by H₂O, CH₃CH₂OH and [bmim][PF₆] decreased rapidly with the increase of the molar fraction of [bmim][PF₆]. The inhibitory effect of [bmim][PF₆] on YADH was probably caused by the competition of the imidazole group of [bmim][PF₆] with the coenzyme NAD⁺ for the binding sites on YADH. In a water‐in‐[bmim][PF₆] microemulsion, YADH was catalytically active due to the formation of the interfacial membrane of the nonionic surfactant TritonX‐100, which separated YADH from [bmim][PF₆] and avoided the direct inactivation of [bmim][PF₆] on YADH. Under optimal conditions, the activity of YADH was as high as 51 µmol L^?1 min^?1. CONCLUSION: [bmim][PF₆] was an inhibitor of YADH and its negative effect on YADH could be lessened by its microemulsification. Copyright © 2008 Society of Chemical Industry     

SHS of metal-oxide systems in a DC magnetic field: Part 1. TRXRD and thermal imaging studies of the Fe-Fe<Subscript>2</Subscript>O<Subscript>3</Subscript> system

The effect of a 0.2 T external magnetic field on the heterogeneous combustion of a mixture of iron metal and oxide (Fe₂O₃) system with solid oxidizer (NaClO₄) was studied. Time-resolved X-ray diffraction (TRXRD) was used to study the kinetics of intermediate product formation and thermal imaging experiments to measure the reaction temperature and velocity. Metastable fcc iron phase formation was discovered as an intermediate predominantly in applied field reactions.     

Synthesis and application of magnetic NaY zeolite composite immobilized with ionic liquid for adsorption desulfurization of fuel using response surface methodology

Magnetic NaY zeolite immobilized with 1-butyl-3-methylimidazolium tetrachloroferrate ([bmim]Cl/FeCl₃) ionic liquid as a reusable, efficient, and easily separable adsorbent was synthesized to remove dibenzothiophene from n-hexane. SEM–EDX, FT-IR were used for characterization of the synthesized magnetic sorbent. The prepared ionic liquid was characterized by with NMR, and mass spectrometry. The magnetic property of the sorbent was considered by VSM method. The obtained saturation magnetization of 19.5 emu g^?1 confirmed the facile separation of magnetic zeolite immobilized with [bmim]Cl/FeCl₃ after adsorption process. Central composite design was applied to predict the proposed process and to achieve the optimum conditions for three influential parameters of temperature, time, and sorbent mass. At the predicted conditions, temperature of 23.2 °C, time of 24.7 min, and sorbent mass of 0.836 g, the sulfur removal of 97.9 ± 0.5 % was experimentally obtained which was close to the model sulfur removal prediction of 98.4 %. This noticeable agreement proved the proper and acceptable estimation of the central composite design model for the proposed process. The experimental data were reasonably fitted to the Langmuir and Freundlich model which shows that the sorption takes place on a heterogeneous material. The sorption capacities of 2.957 (mg g^?1) were achieved from sorption isotherms.     

Accurate Prediction of the Surface Tensions of Ionic Liquids–Amines–Water Mixtures Regarding CO2 Recovery and Sequestration Processes

A support vector machine (SVM) model is presented concerning accurate prediction of the surface tension of the complex mixtures of ionic liquids (ILs)–amines–water using the most important types of amines employed in the gas sweetening plants, such as monoethanolamine, diethanolamine, and methyldiethanolamine. Different ILs, such as [bmim] [BF₄], [bmim] [DCA], [mmim] [dmp], [emim] [dep], [bmim] [BF₄], [bmim] [Br], [bmim] [BF₄], and [bmim] [Br], are considered in the presented model. The effects of most important influencing parameters, such as temperature and mass fraction of amines and ILs, on the surface tension of the aqueous mixtures of ILs and amines are well represented. A comparison of the presented model and the most important models reveals that the suggested SVM model has better performance in terms of accuracy and generalizability. The percentage average absolute deviation between the predicted and experimental surface tensions is about 0.44% suggesting the superiority of the presented model over wide ranges of temperatures and species concentrations.     

Selective oxidation of H<Subscript>2</Subscript>S to ammonium thiosulfate and elemental sulfur using mixtures of V-Bi-O and Sb<Subscript>2</Subscript>O<Subscript>4</Subscript>

The selective oxidation of hydrogen sulfide in the presence of excess water and ammonia was investigated by using vanadium-bismuth based mixed oxide catalysts. Synergistic effect on catalytic activity was observed for the mechanical mixtures of V-Bi-O and Sb₂O₄. Temperature programmed oxidation (TPO), X-ray photoelectron spectroscopy (XPS), and two separated bed reactivity test results supported the role of Sb₂O₄ for reoxidizing the reduced V-Bi-O during the reaction. This paper is dedicated to Professor Hyun-Ku Rhee on the occasion of his retirement from Seoul National University.     

Facile and effective promotion of β crystalline phase in poly(vinylidene fluoride) via the incorporation of imidazolium ionic liquids

In this study, a facile and efficient protocol to enhance the β‐phase content of poly(vinylidene fluoride) (PVDF) is developed, in which the effect of room temperature ionic liquids (RTILs), including [1‐butyl‐3‐methylimidazolium (bmim)][PF₆], [bmim][BF₄], [bmim][FeCl₄] and [bmim][Cl], on the crystallization behavior of PVDF is investigated. The resulting PVDF/RTIL hybrids are characterized by Fourier transform infrared (FTIR) spectroscopy, XRD, polarized optical microscopy (POM) and DSC. The FTIR spectroscopy and XRD results show that the fraction of β‐phase, F(β), is significantly enhanced by the incorporation of RTILs, specifically from 49.2% for neat PVDF to 92.6% for hybrid filled with 15 wt% [bmim][PF₆]. The analysis of the crystallization behavior based on the DSC tests reveals that the degree of crystallinity increases with incorporation of RTILs, implying that RTILs could act as directing agents to facilitate the crystallization process, which is further evidenced by the POM results. In addition, the non‐isothermal crystallization kinetics of PVDF and PVDF/RTIL composites are investigated by means of DSC and the results indicate that the addition of the RTILs significantly influences the mechanism of nucleation and growth of PVDF crystallites. © 2013 Society of Chemical Industry     

Electropolymerization of benzotriazole in room temperature ionic liquid [bmim]PF<Subscript>6</Subscript>

The electropolymerization of benzotriazole on an Au electrode was investigated via cyclic voltammetry and chronoamperometry in a room temperature ionic liquid medium, 1-butyl-3-methylimidazolium hexafluorophosphate ([bmim]PF₆) containing glacial acetic acid. The chronoamperometric investigation revealed that the instantaneous nucleation predominated the potentiostatic electropolymerization of benzotriazole at the oxidation peak potential. Scanning electron microscopy indicated that the polymer film was compact and relatively smooth and infrared spectroscopy suggested the polymer chains were formed mainly via coupling of the unsaturated nitrogen atoms. The polymer was found to be highly electroactive, showing a quasi-reversible and stable pair of redox peaks centering at 0.9 V versus Ag/AgCl in 0.1 mol L⁻¹ H₂SO₄.     

Preparation of stable magnetic nanofluids containing Fe<Subscript>3</Subscript>O<Subscript>4</Subscript>@PPy nanoparticles by a novel one-pot route

Stable magnetic nanofluids containing Fe₃O₄@Polypyrrole (PPy) nanoparticles (NPs) were prepared by using a facile and novel method, in which one-pot route was used. FeCl₃·6H₂O was applied as the iron source, and the oxidizing agent to produce PPy. Trisodium citrate (Na₃cit) was used as the reducing reagent to form Fe₃O₄ NPs. The as-prepared nanofluid can keep long-term stability. The Fe₃O₄@PPy NPs can still keep dispersing well after the nanofluid has been standing for 1 month and no sedimentation is found. The polymerization reaction of the pyrrole monomers took place with Fe³⁺ ions as the initiator, in which these Fe³⁺ ions remained in the solution adsorbed on the surface of the Fe₃O₄ NPs. Thus, the core-shell NPs of Fe₃O₄@PPy were obtained. The particle size of the as-prepared Fe₃O₄@PPy can be easily controlled from 7 to 30 nm by the polymerization reaction of the pyrrole monomers. The steric stabilization and weight of the NPs affect the stability of the nanofluids. The as-prepared Fe₃O₄@PPy NPs exhibit superparamagnetic behavior.     

Fe<Subscript>3</Subscript>O<Subscript>4</Subscript>@SiO<Subscript>2</Subscript>@TiO<Subscript>2</Subscript>-OSO<Subscript>3</Subscript>H: an efficient hierarchical nanocatalyst for the organic quinazolines syntheses

A sulfonic acid functionalized titanium dioxide quasi-superparamagnetic nanocatalyst Fe₃O₄@SiO₂@TiO₂-OSO₃H with average size of 61 nm and semispherical shape with surface area about 97 m² g^?1 with saturation magnetization 17.7 emu g^?1 and the coercivity 9.84 Oe was successfully synthesized. The structure and morphology of the nanocatalyst was characterized by Fourier transform infrared spectroscopy (FT-IR), energy-dispersive X-ray spectroscopy, X-ray diffraction pattern, transmission electron microscopy, field-emission scanning electron microscopy, vibrating sample magnetometer and Brunauer–Emmett–Teller surface area analysis. The catalytic usage of the nanocatalyst was exemplified in synthesis of 2,3-dihydroquinazolin-4(1H)-one and spiroquinazolin-4(3H)-one derivatives in deep eutectic solvents (DESs) based on choline chloride and urea. We suggest that the synergistic effects in catalytic activities of titanium dioxide, organic acid and the CO₂ capture property of DES are the main reasons for the improvement of catalytic activity. The synthesized spiroquinazolinones and dihydroquinazolinones derivatives were characterized by FT-IR, ¹H and ¹³C nuclear magnetic resonance spectroscopy. The magnetic nanocatalyst exhibit high catalytic activity and can be simply separated from reaction media by an external magnet in a few seconds and could be reused for six cycles without significant loos in activity, which indicates the good immobilization of sulfonic acid on the magnetic titanium dioxide support. Furthermore, the solvent which has been used in this work can be readily isolated and reused for several times.     

Physical and electrochemical properties of 1-butyl-3-methylimidazolium bromide, 1-butyl-3-methylimidazolium iodide,and 1-butyl-3-methylimidazolium tetrafluoroborate

The density, viscosity, refractive index, heat capacity, heat of dilution, ionic conductivity, and electrochemical stability of 1-butyl-3-methylimidazolium bromide ([bmim][Br]), 1-butyl-3-methylimidazolium iodide ([bmim][I]), and 1-butyl-3-methylimidazolium tetrafluoroborate ([bmim][BF₄]) were measured at room temperature or over a temperature range of 293.2 to 323.2 K. The density and refractive index values of [bmim][I] appeared to be the highest among three ionic liquids (ILs). However, the experimental viscosity values of [bmim][Br] were higher than those of [bmim][BF₄], while the heat capacities and heats of dilution of [bmim][BF₄] were higher than those of [bmim][Br]. The cyclic voltammogram of [bmim][br] and [bmim][BF₄] indicated electrochemical windows in the stability range from 2.7 V of [bmim][[Br] to 4.7 V of [bmim][BF₄].     

Chitosan- and dehydroascorbic acid-coated Fe<Subscript>3</Subscript>O<Subscript>4</Subscript> nanoparticles: preparation,characterization and their potential as draw solute in forward osmosis process

Forward osmosis (FO) is a natural osmosis process that has attracted a significant attention due to its many advantages. However, the development of FO process depends on the development of proper draw solutions. In this work, chitosan (CS)-coated Fe₃O₄ nanoparticles and dehydroascorbic acid (DHAA)-coated Fe₃O₄ nanoparticles were successfully synthesized by co-precipitation method and their performance as draw solutes was investigated for application in FO systems. CS and DHAA could improve the surface hydrophilicity of the Fe₃O₄ nanoparticles. The synthesized nanoparticles were characterized by field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), X-ray diffractometry (XRD), Fourier transform infrared spectroscopy (FTIR) and vibrating sample magnetometry (VSM) which the results presented a small size, crystalline morphology and high magnetization value for their structure as well as a good dispersion in water. Cellulose triacetate/cellulose acetate (CTA/CA)-based membranes were also prepared by immersion precipitation and used as FO membranes. The synthesized FO membranes were characterized by FESEM. The performance evaluation of synthesized nanoparticles revealed that the water flux of Fe₃O₄ nanoparticles capped with DHAA was higher than that of the chitosan-coated Fe₃O₄ nanoparticles. At the end of the process, the Fe₃O₄ nanoparticles were easily separated from the diluted draw solution by applying the magnetic field.     

Chloroferrate(III) Ionic Liquid: Efficient and Recyclable Catalyst for Solvent-free Synthesis of 3,4-Dihydropyrimidin-2(1H)-ones

A water-tolerant Lewis acidic ionic liquid, [bmim][FeCl₄], was found to be an efficient and recyclable catalyst in the synthesis of 4-aryl-dihydropyrimidinones through Biginelli condensation. This method is capable of being scaled up, if desired.     

Magnetite (Fe3O4) Nanoparticles‐Catalyzed Sonogashira– Hagihara Reactions in Ethylene Glycol under Ligand‐Free Conditions

A novel application of nanoparticles of paramagnetic magnetite (Fe₃O₄) as an efficient catalyst for carbon‐carbon bond formation via the Sonogashira–Hagihara reaction under heterogeneous ligand‐free conditions in ethylene glycol (EG) is described. By using this catalyst, arylalkynes are produced from the reaction of aryl iodides and activated heteroaryl bromides with alkynes. The results are reproducible using the catalyst, which was prepared from different sources. The catalyst is easily separated by an external magnetic field from the reaction mixture. The separated catalyst can be recycled for several consecutive runs without appreciable loss of its catalytic activity.