Shift and shape of grating diffracted beams

Abstract

The grating diffraction of beams is theoretically investigated by applying an electromagnetic method (the Integral Equation System Method with Parametrization of the grating profile = IESMP) to their plane wave components. For the first time, explicit values for the displacement of grating diffracted Gaussian beams are calculated with this method. For total reflection this displacement of beams is known as the Goos-Hänchen shift. A maximum shift of 36 μm has been found for the investigated sinusoidal grating near an anomaly which is much greater than the known Goos–Hänchen shift of about 1 μm for the total reflection case. The replacement of the angular spectrum of plane waves with constant wavelength by a wavelength spectrum of plane waves of constant direction allows an analogous treatment of short-time pulses. Surprisingly, the above anomaly causes a maximum temporal shift of 80 fs for the pulse diffraction. These temporal shifts and additional effects like pulse deformations can influence ultra short-time pulse experiments. Furthermore, the behaviour of temporally and spatially Gaussian shaped light pulses (TSG pulses) by grating diffraction are studied considering the diffraction of an angular and wavelength dependent spectrum of plane waves. The diffraction of a short TSG pulse at the above grating deforms the pulse and creates an additional smaller satellite pulse. All described effects occur only at positions of the space–time complex filtering function in the angular-wavelength frequency space with high gradient of the phase.     

Vector diffraction analysis of optical disk readout

The optical disk readout signals from ROM disks are presented by use of a rigorous three-dimensional vector diffraction method. The optical disk is modeled as a crossed metal grating without restriction on the form of the information marks, and the permittivity of the metal is taken into account. The diffracted field from the disk is obtained by means of decomposing the focused incident beam into a spectrum of plane waves and then calculating the diffracted plane waves for each respective incident component. The readout signal is obtained by integration of the energy-flux density of the diffracted field according to the detection scheme of the optical disk system. A typical digital versatile disk (DVD) system is applied with this theory, and the result is far from that of scalar diffraction theory.     

Effect of Slab Interfaces on Diffraction of Visible Light by a Thick Volume Grating

Abstract

A theory of visible light diffraction by a volume grating is given for the case when reflection at slab interfaces cannot be neglected. A method of approximate solution of the second-order coupled-wave equations, applicable over a wide range of the grating vector orientation, is proposed. An appropriate boundary-value problem is discussed and solved in the two-wave approximation. The results are analytical and expressed in matrix notation suitable for both transmission and reflection diffraction gratings. Particular attention is given to the diffraction regime that arises in a slanted grating under the total internal reflection of the diffracted wave (TIRDW). Strong transmission anomalies occurring in the vicinity of the TIRDW threshold are established and analysed.     

Grazing Diffraction by Volume Phase Gratings

Light diffraction by a volume phase grating with slanted fringes is considered. An analytical solution of the system of second-order coupled wave equations is obtained and applied to the problems of grazing diffraction by a transmission grating. It is shown that a strong backward diffracted wave arises, demonstrating that the grating can behave simultaneously as a transmission and a reflection grating. The diffraction efficiency balance and angular selectivity are analysed.     

Self-pumped phase-conjugate interferometer with a photorefractive iron-doped lithium-niobate crystal

A single object wave is amplitude divided by a beam splitter into two waves of equal intensity that are made to interfere at the back surface of an iron-doped lithium-niobate crystal so that the normal to the back surface is the angular bisector of the input waves. The interference results in the formation of a phase grating (Bragg grating) in the volume of the crystal. These waves are diffracted at the Bragg grating on both the front focal plane and the back focal plane of the crystal. The wave diffracted in the back focal plane from the Bragg grating and counterpropagating to the incident wave is observed to be the phase conjugate of the input object wave. The wave diffracted in the front focal plane of the Bragg grating is incorporated into the design of an interferometer to measure a specific in-plane displacement of the object wave. It is theoretically evaluated and experimentally demonstrated that interferometers such as those that incorporate conjugate-wave pairs are highly sensitive.     

Polarization of holographic grating diffraction. I. General theory

The full polarization property of volume holographic grating diffraction is investigated theoretically. With a simple volume grating model, the diffracted fields and Mueller matrices are first derived from Maxwell's equations by using the Green's function algorithms. The formalism is derived for the general case that the diffraction beam and the grating wave vector are not in the plane of incidence, where s waves and p waves are not decoupled. The derived photon-momentum relations determine the Bragg angle selectivity. The parameters of diffraction strength related to the hologram-writing process and material are defined and are not necessarily small in general. The diffracted-beam profiles are analytically calculated by using the known grating shape function. This theory has provided a fundamental understanding of the polarization phenomena of a real holographic diffraction grating device. The derived algorithm would provide a simulation-analysis tool for the engineering design of real holographic beam combiner/splitter devices.     

Optimization of the parallelogrammic grating diffraction efficiency for normally incident waves

The diffraction directivity of parallelogrammic gratings with second-order pitch is examined for a plane wave normally incident upon a corrugated waveguide structure. The three diffracted components are assumed to be in the form of guided waves, which permits a self-consistent calculation. The efficiencies of diffraction into the horizontal components are obtained. Also, the dependence of efficiency on grating thickness, waveguide thickness, grating pitch, and angle of inclination is determined. The approach provides a useful simulation tool for optimizing the design parameters for waveguide couplers with an orthogonal source.     

Optical grating diffraction method: from strain microscope to strain gauge

The grating diffraction method for direct strain measurement is reviewed. Two systems which use this method are presented. The first system is a compact strain microscope. A Leitz optical transmitting microscope with white light source is reconstructed by developing a loading and recording system. Gratings with median density of between 40 and 200 lines/mm are used. With the help of a Bertrand lens, the Fourier spectrum of the grating is formed with high image quality on the CCD sensor plane. Software is developed to precisely, quickly and automatically determine the diffraction spot centroids. The second system is a new strain sensor based on a high-frequency grating and two Position Sensor Detectors (PSDs). The grating, attached to the surface of the specimen, is illuminated by a focused laser beam, generally with a frequency of 1,200 lines/mm. The centroids of diffracted beam spots from the grating are automatically determined using two PSD sensors connected to a personal computer. The shift of diffracted beam spots due to specimen deformation is detected. Strain sensitivity of one micro-strain can be obtained, as can a 0.4 mm spatial resolution for strain measurement. The system can be used for both static and dynamic tests.     

Diffraction characteristics of spatial and temporal Gaussian-shaped femtosecond laser pulse by rectangle reflection grating

The exact intensity distribution expression for the spatial and temporal Gaussian-shaped femtosecond laser pulse diffracted by a rectangle reflection grating is derived. The spatial and temporal diffraction characteristics are theoretically investigated in detail, and a criterion for judging whether or not the diffraction pulse is just split into two independent pulses in the temporal domain is obtained. The results show that the diffraction intensity in the temporal domain consists of three parts: the intensity diffracted by the upper reflection surface of the grating, the intensity diffracted by the nether reflection surface, and their temporal coherent intensity. The temporal coherent intensity becomes weaker, even is zero, for the higher height from the nether surface to the upper surface of the grating. The principal maximum becomes more sharply bright for the bigger waist width of the femtosecond laser pulse in the spatial domain.     

Binary blazed reflection gratings

A reflection grating with a binary surface profile is presented that has high diffraction efficiency. The measured intensity for the + 1st diffracted order was 77%. The binary grating is composed of a minilattice with feature sizes comparable with the wavelength of the incident light. The overall structure is designed in such a way that it imitates a conventional blazed grating. The grating also has interesting polarization properties. The main part of the TE-polarized light is diffracted into the 1st diffracted order, and most of the TM-polarized light remains in the 0th diffracted order. The measurements of the grating are compared with rigorous diffraction theory and found to be in reasonable agreement.     

Diffraction Efficiency of Attenuated Sinusoidally Modulated Gratings in Volume Holograms

Based on the theory of coupled waves the amplitude of the first-order diffracted wave and the diffraction efficiency respectively is calculated for an attenuated sinusoidally modulated grating using suitable approximations. Solutions for absorption, lossless dielectric, and mixed holograms in transmission and reflection are given. It is shown that the attenuation acts as a decreasing factor of the effective thickness of the storage medium. A deviation of Bragg-angle incidence shows an increasing and shifting of the secondary minimum and maximum values related to the normalized maximum value caused by attenuation.     

Phase constraint for the waves diffracted by lossless symmetrical gratings at Littrow mount

The energy conservation of grating diffraction is analyzed in a particular condition of incidence in which two incident waves reach a symmetrical grating from the two sides of the grating normal at the first-order Littrow mounting. In such a situation the incident waves generate an interference pattern with the same period as the grating. Thus in each direction of diffraction, interference occurs between two consecutive diffractive orders of the symmetrical incident waves. By applying only energy conservation and the geometrical symmetry of the grating profile to this problem it is possible to establish a general constraint for the phases and amplitudes of the diffracted orders of the same incident wave. Experimental and theoretical results are presented confirming the obtained relations.     

Diffraction of waves by an oscillating source and an oscillating half plane

In this paper we have studied the problem of diffraction of cylindrical acoustic waves (emanating from a harmonic time dependent source) by an oscillating half plane. An analytical solution, using spatial and temporal Fourier transforms, complex Fourier series, the Wiener-Hopf technique and the method of steepest descent, is constructed. Some graphs showing the effects of various parameters on the diffracted field are also presented.     

Diffraction properties of volume holographic gratings for an ultrashort pulsed beam with different polarization states readout

The diffraction properties of volume holographic gratings are studied when the gratings are illuminated by an ultrashort pulsed beam with different polarization states. The developed coupled wave theory of Kogelnik is used. Considering the dispersion effect of the grating media, solutions for the diffracted and transmitted intensities, diffraction efficiencies and the bandwidths of the gratings are given in transmission volume holographic gratings and reflection volume holographic gratings. The bandwidths of the gratings are reduced by the dispersion effect of the grating media. They also have different influences on the diffraction of an ultrashort pulsed beam with different polarization states. For different values of the ratio of the spectral bandwidth of the input pulse to that of the grating, the changes of the spectral and temporal distributions of the diffracted intensities, as well as the diffraction efficiencies of the gratings are shown.     

The Properties of Holographic Overlap Gratings

The analysis of a holographic beam expander which can, under perfect lossless conditions, convert a plane input beam into a plane diffracted beam, with a specified diffraction efficiency and beam width expansion ratio, is presented. Using solutions of the coupled-wave differential equations of [2], the effects of average loss, and both constant and spatially dependent dephasing are studied. These solutions are also used to compare the properties of overlap gratings with Kogelnik's [1] results for infinite gratings, and to extend the analysis of [4] to lossy, dephased cases. The maximum possible diffraction efficiency of an absorption overlap grating is shown to depend on its shape and also to lie between the values for Kogelnik's reflection and transmission cases.     

Analytical solution of the Takagi equations for X-ray backscattering from a cylindrically bent crystal

An approximate analytical solution of the system of Takagi equations for the amplitudes of diffracted and transmitted waves is obtained for the backscattering of a plane X-ray wave from an elastically bent crystal. In the case of diffraction in the reverse direction (strict backscattering), the obtained solution is exact.     

Fast calculation method for optical diffraction on tilted planes by use of the angular spectrum of plane waves

A novel method for simulating field propagation is presented. The method, based on the angular spectrum of plane waves and coordinate rotation in the Fourier domain, removes geometric limitations posed by conventional propagation calculation and enables us to calculate complex amplitudes of diffracted waves on a plane not parallel to the aperture. This method can be implemented by using the fast Fourier transformation twice and a spectrum interpolation. It features computation time that is comparable with that of standard calculation methods for diffraction or propagation between parallel planes. To demonstrate the method, numerical results as well as a general formulation are reported for a single-axis rotation.     

Nonparaxial scalar treatment of sinusoidal phase gratings

Scalar diffraction theory is frequently considered inadequate for predicting diffraction efficiencies for grating applications where lambda/d>0.1. It has also been stated that scalar theory imposes energy upon the evanescent diffracted orders. These notions, as well as several other common misconceptions, are driven more by an unnecessary paraxial approximation in the traditional Fourier treatment of scalar diffraction theory than by the scalar limitation. By scaling the spatial variables by the wavelength, we have previously shown that diffracted radiance is shift invariant in direction cosine space. Thus simple Fourier techniques can now be used to predict a variety of wide-angle (nonparaxial) diffraction grating effects. These include (1) the redistribution of energy from the evanescent orders to the propagating ones, (2) the angular broadening (and apparent shifting) of wide-angle diffracted orders, and (3) nonparaxial diffraction efficiencies predicted with an accuracy usually thought to require rigorous electromagnetic theory.     

On a General Theory of Anomalies and Energy Absorption by Diffraction Gratings and Their Relation with Surface Waves

The authors generalize a previous theory to study the phenomenon of absorption of plane waves by a grating working with several spectral orders. The theory allows predicting, with the aim of a simple formula, the shape of various kinds of grating anomalies, as well as the shape of the total diffracted energy curve. The use of a convenient matrix, called S*S, leads to the introduction of the efficiency hyperellipsoid. This enables one to predict in a simple way a phenomenon of total absorption of a finite number of plane waves by a grating.     

Estimation method for the light extraction efficiency of light-emitting elements with a rigorous grating diffraction theory

The light extraction efficiency of a light-emitting element with microstructured surface is analyzed with a rigorous grating diffraction theory. The grating theory reveals an improvement of extraction efficiency due to diffraction of light by the surface microstructure. The simulation results show that the improvement of extraction efficiency is due mainly to the reflected diffraction rather than to the transmitted diffraction. A part of total-internal-reflection light is diffracted into directions at less than the critical angle. Extraction efficiency is improved by multiple reflection and diffraction of light in a high-refractive-index layer. We propose a simple design method for an efficient surface microstructure from the viewpoint of reflected diffraction.