Ultra-High bit rate all-optical AND/OR logic gates based on photonic crystal with multi-wavelength simultaneous operation

In this paper, a novel two-dimensional photonic crystal based all-optical AND/OR logic gates are designed, simulated and optimized. The structure is built on a linear square lattice photonic crystal platform. A multi-wavelength operation, together with a simultaneous operation, is achieved at ultra-high bit rates. The concurrent operation is attained without altering the proposed design continuously, as stated in the literature. It provides simplicity because there is no auxiliary input required along with the absence of externally attached phase shift units. The enhancement process has been done to the rod radius. A magnificent representation tool is developed. The benefit of the mentioned tool lies in the data combination of different operating wavelengths, contrast ratio, and bit rate; which will establish an efficient optimization process. Each gate is enhanced independently, then an overall improvement has been done. As a result, the operation at 1.52?µm will provide a successful multi logic gate operation with ultra-high bit rates of 6.76 and 4.74 Tbit/s for AND and OR logic gates, respectively. The design has an acceptable size of (19.8?×?12.6 µm) and a contrast ratio of 9.74?dB and 17.95?dB for the designed AND and OR gate, respectively. The design is highly sensitive to the waveguide length to verify the gates on demand.     

All-optical photonic crystal AND,XOR, and OR logic gates using nonlinear Kerr effect and ring resonators

In this article, two structures are proposed for all-optical AND, XOR, and OR logic gates based on nonlinear photonic crystals. The proposed structures include a Y-junction and ring resonator-based limiters. Two different structures are designed as the limiter in order to produce AND–XOR and AND–OR logic gates. Nonlinear rods of proposed structure have been used in order to create the frequency shift for different values of input power. Finite difference time domain method has been utilized to simulate the performance of proposed logic gates. Simulation results show that the smallest ON–OFF logic-level contrast ratio for the structures proposed for AND–XOR and AND–OR logic gates are 20.29 dB and 16.7 dB, respectively.     

Ultrahigh speed all-optical AND logic gate using integrated silicon-based MZI device

In this paper, we present a device with a silicon-on-insulator (SOI) based symmetrical Mach–Zehnder interferometer (MZI) structure to perform the ultrahigh speed all-optical AND logic gate function. Simulation results show that, while the operation speed is at a bit rate of 200 Gbit s^?1, the output parameters including extinction ratio and eye-opening ratio for outcome AND logic gate signal can, respectively, reach as high as ～12.8 dB, and ～0.94 in the case of a 5 mm long SOI waveguide by means of judiciously adjusting the initial conditions, such as incident signal and probe continuous-wave (CW) powers.     

On chip optical isolator based on non-linear silicon photonic crystal by using asymmetric engineering waveguide

We propose an optical isolator formed in a nanoscale structure based on non-linear silicon photonic crystal that can be easily realized on an optical integrated chip. The structure comprises an engineered waveguide that is coupled to a L₂ cavity. By using a passive ultra-compact cavity-based isolator, without changing incident characteristics such as mode or frequency in outputs, an admirable transmission contrast of 20.5 dB with a small insertion loss (in the forward direction) of ?14.8 dB is achieved. The isolator attains a broad isolating linewidth operation of 0.9 nm without bistability response that is outstanding in comparison with the currently proposed cavity-based isolators. The non-linear Fano resonances that are created by the interplay between the non-linearity and spatial asymmetry notion in the structure play a critical role in the isolator efficiency. In this study, the finite-difference time-domain and finite element methods are used for simulations.     

Broadband wavelength conversion in hydrogenated amorphous silicon waveguide with silicon nitride layer

Broadband wavelength conversion based on degenerate four-wave mixing is theoretically investigated in a hydrogenated amorphous silicon (a-Si:H) waveguide with silicon nitride inter-cladding layer (a-Si:HN). We have found that enhancement of the non-linear effect of a-Si:H waveguide nitride intermediate layer facilitates broadband wavelength conversion. Conversion bandwidth of 490 nm and conversion efficiency of 11.4 dB were achieved in a numerical simulation of a 4 mm-long a-Si:HN waveguide under 1.55 μm continuous wave pumping. This broadband continuous-wave wavelength converter has potential applications in photonic networks, a type of readily manufactured low-cost highly integrated optical circuits.     

The enhanced phase modulation ability of optical modulator based on bi-layer graphene-silicon waveguide

We demonstrate that by inserting bi-layer graphene inside silicon waveguide, the modulation ability of the overall waveguide can be greatly enhanced. Moreover, the modulation ability of the waveguide remains stable under the variations of the temperature and the wavelength of the incident light. A Mach–Zehnder modulator based on this structure is proposed and the calculated results show that the modulator exhibits an excellent performance in terms of short length arm (7 μm), low energy consumption (8 fJ/bit) and high extinction ratio (31 dB). Besides, it requires low applied voltage and can be compatible with CMOS technology.     

All optical active high decoder using integrated 2D square lattice photonic crystals

The paper introduces a novel all optical active high 2 × 4 decoder based on 2D photonic crystals (PhC) of silicon rods with permittivity of ε = 10.1 × 10^?11 farad/m. The main structure of optical decoder is designed using a combination of five nonlinear photonic crystal ring resonator, set of T-type waveguide, and line defect of Y and T branch splitters. The proposed structure has two logic input ports, four output ports, and one bias input port. The total size of the proposed 2 × 4 decoder is equal to 40 μm × 38 μm. The PhC structure has a square lattice of silicon rod with refractive index of 3.39 in air. The overall design and the results are discussed through the realization and the numerically simulation to confirm its operation and feasibility.     

Asymmetric light transmission based on coupling between photonic crystal waveguides and L1/L3 cavity

A compact design of all-optical diode with mode conversion function based on a two-dimensional photonic crystal waveguide and an L1 or L3 cavity is theoretically investigated. The proposed photonic crystal structures comprise a triangular arrangement of air holes embedded in a silicon substrate. Asymmetric light propagation is achieved via the spatial mode match/mismatch in the coupling region. The simulations show that at each cavity’s resonance frequency, the transmission efficiency of the structure with the L1 and L3 cavities reach 79% and 73%, while the corresponding unidirectionalities are 46 and 37 dB, respectively. The functional frequency can be controlled by simply adjusting the radii of specific air holes in the L1 and L3 cavities. The proposed structure can be used as a frequency filter, a beam splitter and has potential applications in all-optical integrated circuits.     

Multi-channel terahertz wavelength division demultiplexer with defects-coupled photonic crystal waveguide

Abstract

Terahertz (THz) wavelength division demultiplexer based on a compact defects-coupled photonic crystal waveguide is proposed and demonstrated numerically. This device consists of an input waveguide that perpendicularly coupled with a series of defects cavities, each of which captures the resonance frequency from the input waveguide. Coupled-mode theory and finite element method are used to analyze the transmission properties of the structure. It is found that the transmission wavelength centered around 1 THz can be adjusted by changing the geometrical parameters of defects cavities, which equals to THz waves generated by optical methods such as difference frequency generation and optical rectification. Applications in this frequency range are urgently needed. Furthermore, the highest transmission efficiency of 0.94 can be achieved when a perfect wavelength-selective mirror is set in the output waveguide.     

Slow light with large group index – bandwidth product in lattice-shifted photonic crystal waveguides

Abstract

This study presents a systematic optimization procedure to generate slow light with large group index, wideband, and low dispersion in an lattice-shifted photonic crystal waveguide. The waveguide is based on triangular lattice photonic crystal imposed by selectively altering the locations of the holes adjacent to the line defect. Under a constant group index criterion of ± 10% variation, when group indices are nearly constants of 24, 33, 46, 57, and 66, their corresponding bandwidths of flat band reach 24.2, 17.6, 12.8, 10.1 and 8.6 nm around 1550 nm, respectively. A nearly constant large group index – bandwidth product (GBP) of 0.37 is achieved for all cases. Low dispersion slow light propagation is confirmed by studying the relative temporal pulse-width spreading with the 2-D finite-difference time-domain method.     

Mid-infrared supercontinuum generation in tapered As2S3 chalcogenide planar waveguide

Abstract

We numerically demonstrate mid-infrared supercontinuum generation in a non-uniformly tapered chalcogenide planar waveguide. This planar rib waveguide of As₂S₃ glass on MgF₂ is 2 cm long with increasing etch depth longitudinally to manage the total dispersion. This waveguide has zero dispersion at two wavelengths. The dispersion profile varies along the propagation distance, leading to continuous modification of the phase-matching condition for dispersive wave emission and enhancement of energy transfer efficiency between solitons and dispersive waves. Numerical simulations are conducted for secant input pulses at a wavelength of 1.55 μm with a width of 50 fs and peak power of 2 kW. Results show this proposed scheme significantly broadens the generated continuum, extending from ~1 to ~7 μm.     

A novel broadband terahertz filter for photonic crystal

Abstract

The influence of the change of the radius of point defect cylinders, scattering dielectric cylinders, dielectric cylinders on both sides of line waveguide on S parameter is studied. According to the resonant coupling principle between micro-cavity and waveguide, a novel broadband terahertz filter is designed. The novel filter is formed by introducing scattering dielectric cylinders into the resonant microcavity, and the point defect cylinders are composed of HgTe material and adjusting the radius of dielectric cylinders on both sides of line waveguide. Results show that the 3 dB bandwidth reaches 74.2 GHz, the return loss is less than ?12.02 dB, the maximum insertion loss in-band reaches 0.35 dB and its drop efficiency is up to 96.79%. The novel terahertz filter has flat passband, sharp rejections at out-bands and its central frequency is 0.338THz. The good performances show that it can meet the requirements of high speed and broadband in terahertz atmosphere communication I window.     

Fast response and low power consumption 1×2 thermo-optic switch based on dielectric-loaded surface plasmon polariton waveguides

Abstract

In this paper, we present a 1 × 2 thermo-optic (TO) switch based on the integration of the dielectric-loaded surface plasmon polariton (SPP) waveguides with the silicon nanowires. Liquid-curable fluorinated resin (LFR) made of perfluorinated polymer was adopted as the ridge, which has a TO coefficient twice more than that of polymethyl methacrylate, leading to a significant decrease in the power consumption. It was shown that the response time of the dielectric-loaded SPP waveguide could be improved through optimizing the dimensions of the LFR polymer ridge without loss of relative high figure of merit and large confinement factor. Performance characteristics of such a 1 × 2 TO switch operating at a telecom wavelength of 1550 nm was investigated theoretically from the analysis of both heat and optical fields. The results reveal that a switching power as low as 7 mW and an extremely short switching time (with rise time of 3 μs and fall time of 6.7 μs) could be achieved with the proposed dielectric-loaded SPP-based 1 × 2 TO switch. In addition, the crosstalk could be enhanced to at least 40 dB with the applied power of 7 mW at the wavelength of 1550 nm, and it could be retained to be above 20 dB in the wavelength spectrum of 1500–1600 nm during the on/off state.     

Optical fibre Fabry–Perot relative humidity sensor based on HCPCF and chitosan film

Abstract

An optical fibre Fabry–Perot interferometer (FPI) sensor for relative humidity (RH) measurement is proposed. The FPI is formed by splicing a short section of hollow-core photonic crystal fibre(HCPCF) to single mode fibre and covering a chitosan film at the end of HCPCF. The refractive index of chitosan and film thickness will change with ambient RH, leading to the change in the reflected interference spectrum of FPI. RH response of the FPI sensor is analysed theoretically and demonstrated experimentally. It shows nonlinear response to RH values from 35 to 95%RH. The interference fringe shifts to shorter wavelength as RH increases with a maximum sensitivity of 0.28 nm/%RH at high RH level. And the fringe contrast also decreases as RH increases with an available maximum sensitivity of 0.5 dB/%RH. The sensor shows good stability and fast response time less than 1 min. With its advantages of compact structure, good performance, simple and safe fabrication, the proposed optical fibre FPI sensor has great potential for RH sensing.     

All-optical digital 4 × 2 encoder based on 2D photonic crystal ring resonators

The photonic crystals draw significant attention to build all-optical logic devices and are considered one of the solutions for the opto-electronic bottleneck via speed and size. The paper presents a novel optical 4 × 2 encoder based on 2D square lattice photonic crystals of silicon rods. The main realization of optical encoder is based on the photonic crystal ring resonator NOR gates. The proposed structure has four logic input ports, two output ports, and two bias input port. The photonic crystal structure has a square lattice of silicon rods with a refractive index of 3.39 in air. The structure has lattice constant ‘a’ equal to 630 nm and bandgap range from 0.32 to 044. The total size of the proposed 4 × 2 encoder is equal to 35 μm × 35 μm. The simulation results using the dimensional finite difference time domain and Plane Wave Expansion methods confirm the operation and the feasibility of the proposed optical encoder for ultrafast optical digital circuits.     

Investigation and Simulation of a Two-Channel Drop Filter with Tunable Double Optical Resonators

In this paper, a photonic crystal (PhC) two-channel drop filter based on two 2×2 & 2×3 ring resonators is proposed. This structure is made of Germanium rods in an air background at a two-dimensional (2D) square lattice. Refractive index is chosen in a way in which that device can be easily fabricated. The photonic crystal two-channel drop filter is composed using a horizontal waveguide and two ring resonators, which are placed symmetrically about the horizontal axis. These ring resonators operate as energy coupling and capture the electromagnetic energy propagated in bus waveguide at their resonance frequencies. The filter characteristics are calculated using 2D finite-difference time-domain (FDTD) and plane wave expansion (PWE) methods. We show a two-channel drop filter with two resonators, based on studied basic structures and achieving optimal modes for channel drop filters with one resonator. We have done this through choosing the proper radii for all rods of lattice, setting radii of coupling rods, lattice constant, and studying basic structures having different refractive indexes. Finally, we show 84 % and 100 % dropping efficiencies can be achieved at D and C ports in the communication window and 100 % in direct port. The size of this device is 14.56 μm (length)×11.96 μm (width). This small size makes it possible to use the device in multiplexer applications in future communication systems and in all-optical integrated circuits.     

Ultracompact wavelength and polarization directional coupler based on nanowire waveguides

In this paper, we numerically study and propose a wavelength and polarization selective directional coupler based on nanowire waveguides. The plane wave expansion method is used to design the structures and the finite-difference time–domain method is used to evaluate the device performance, which agrees well with each other. The results show that the proposed directional coupler can realize functions of the wavelength and polarization splitters simultaneously without changing the structure parameters. The crosstalks for both wavelength and polarization splitters are lower than ?17 dB at telecommunication wavelengths. The proposed structure has the advantages of small foot print, fabrication without complex nanostructures and complementary metal-oxide-semiconductor compatibility, which is promising for highly dense photonic integration.     

Ultra-flattened negative dispersion for residual dispersion compensation using soft glass equiangular spiral photonic crystal fiber

Abstract

We present a numerical investigation of an equiangular spiral photonic crystal fibre (ES-PCF) in soft glass for negative flattened dispersion and ultra-high birefringence. An accurate numerical approach based on finite element method is used for the simulation of the proposed structure. It is demonstrated that it is possible to obtain average negative dispersion of –526.99 ps/nm/km over 1.05–1.70 μm wavelength range with dispersion variation of 3.7 ps/nm/km. The proposed ES-PCF also offers high birefringence of 0.0226 at the excitation wavelength of 1.55 μm. The results here show that the idea of using the proposed fibre can be potential means of effectively directing for residual dispersion compensation, fibre sensor design, long distance data transmission system and so forth.     

Label-free detection of glycated haemoglobin in human blood using silicon-based photonic crystal nanocavity biosensor

Abstract

In this paper, we describe a two-dimensional photonic crystal-based biosensor that consists of a waveguide and a nanocavity with high sensitivity. A new method is employed for increasing sensitivity of the biosensor. The simulation results show that biosensor is highly sensitive to the refractive index (RI) variations due to injected biomaterials, like glycated haemoglobin, into the sensing surface. The proposed biosensor is designed for the wavelength range of 1514.4–1896.3 nm. The sensitivity and the quality factor are calculated to be 3000 and 272.43 nm/RIU, respectively. The designed structure can detect a 0.002 change in the RI via resonant wavelength shift of 0.9 nm. The band diagram and transmission spectra are computed using plane wave expansion and finite difference time domain methods.     

All-optical NRZ-to-RZ format conversion at 10 Gbit/s with 1-to-4 wavelength multicasting exploiting cross-phase modulation & four-wave-mixing in single dispersion-flattened highly nonlinear photonic crystal fiber

All-optical NRZ-to-RZ format conversion with a function of wavelength multicasting is proposed in this paper, which is realized by exploiting cross-phase modulation (XPM) and four-wave-mixing (FWM) in a dispersion-flattened highly nonlinear photonic crystal fiber (DF-HNL-PCF). The designed format converter is experimentally demonstrated, for which the 1-to-4 wavelength multicasting is achieved simultaneously by filtering out two FWM idler waves and both blue-chirped and red-chirped components of the broadened NRZ spectrum induced by XPM. Moreover, the wavelength tunability and dynamic characteristics of the proposed NRZ-to-RZ format converter are also exploited using the different central wavelengths of an optical clock signal and varying the input optical power at a DF-HNL-PCF in our experiment. It is shown that the designed format converter can possess a wide range of operational wavelength over 17 nm, an optimal extinction ratio of 11.6 dB, and a Q-factor of 7.1, respectively. Since the proposed scheme uses an optical fiber-based configuration and is easy for implementation, it can be very useful for future applications in advanced fiber-optic communication networks.