Effect of Nb doping on the phase transition and optical properties of sol-gel TiO2 thin films

Various content Nb-doped TiO₂ thin films were prepared by sol-gel process. XRD analysis shows that the existence of crystalline TiO₂ in anatase and rutile form depends on the Nb content in the examined samples. It is observed that Nb promotes the anatase to rutile phase transition but has a depression effect on the anatase grain growth. It is found that incorporation of about 4 at.% of Nb completely transforms anatase TiO₂ to the rutile form at a calcination temperature as high as 900 °C. The mechanism is proposed. Optical analyses show that the films have an average of 60% transmission in visible region. The energy gap values using Tauc's formula have also been estimated. The band gap of rutile Ti_1−xNb_xO₂ solid solutions increases with increasing x.     

Effects of amorphous contents and particle size on the photocatalytic properties of TiO2 nanoparticles

The photoactivities of ultrafine TiO₂ nanoparticles in the anatase, rutile or mixed-phases were tested in the photocatalytic degradation of phenol. For TiO₂ nanoparticles mainly in the anatase phase and mixed-phases, their photocatalytic activities increased significantly with the content of amorphous part decreased, the result bring new understanding and insight to photocatalytic activity of TiO₂ nanoparticles. The completely crystallized rutile nanoparticles exhibited size effect in this photocatalytic reaction, the photocatalytic activity of rutile-type TiO₂ nanoparticles in the size 7.2nm was much higher than that in the size 18.5nm or 40.8nm and comparable to that of anatase TiO₂ nanoparticles.     

Microstructure characterization and photocatalytic activity of mesoporous TiO2 films with ultrafine anatase nanocrystallites

A series of mesoporous TiO₂ films on borosilicate glass with ultrafine anatase nanocrystallites were successfully synthesized using a non-acidic sol gel preparation route, which involves the use of nonionic surfactant Tween 20 as template through a self assembly pathway. The microstructure of these TiO₂ films was characterized by XRD, SEM, HR-TEM, UV-Vis spectroscopy, and N₂ adsorption-desorption isotherm analysis. Their photocatalytic activities were investigated by using creatinine as a model organic contaminate in water. It was found that all mesoporous TiO₂ films prepared with Tween 20 exhibited a partially ordered mesoporous structure. The photocatalytic activity of the TiO₂ films could be remarkably improved by increasing Tween 20 loading in the sol at the range of 50% (v/v), which yielded large amount of catalyst (anatase) on the glass support and enhanced specific surface area. The optimum Tween 20 loading was 50% (v/v) in the sol, above which good adhesion between TiO₂ films and borosilicate glass could not be maintained. The final TiO₂ film (Tween 20: final sol = 50%,v/v) exhibits high BET surface area (∼ 120 m²/g) and pore volume (0.1554 cm³/g), ultrafine anatase nanocrystallinity (7 nm), uniform and crack free surface morphology, and improved photocatalytic activity.     

Low temperature growth of nanocrystalline TiO2 films with Ar/O2 low-field helicon plasma

TiO₂ thin films were deposited on silicon wafer substrates by low-field (1 < B < 5 mT) helicon plasma assisted reactive sputtering in a mixture of pure argon and oxygen. The influence of the positive ion density on the substrate and the post-annealing treatment on the films density, refractive index, chemical composition and crystalline structure was analysed by reflectometry, Rutherford backscattering spectroscopy (RBS) and X-ray diffraction (XRD). Amorphous TiO₂ was obtained for ion density on the substrate below 7 × 10¹⁶ m^− 3. Increasing the ion density over 7 × 10¹⁶ m^− 3 led to the formation of nanocrystalline (~ 15 nm) rutile phase TiO₂. The post-annealing treatment of the films in air at 300 °C induced the complete crystallisation of the amorphous films to nanocrystals of anatase (~ 40 nm) while the rutile films shows no significant change meaning that they were already fully crystallised by the plasma process. All these results show an efficient process by low-field helicon plasma sputtering process to fabricate stoichiometric TiO₂ thin films with amorphous or nanocrystalline rutile structure directly from low temperature plasma processing conditions and nanocrystalline anatase structure with a moderate annealing treatment.     

Dominant microstructural feature over photocatalytic activity of high velocity oxy-fuel sprayed TiO2 coating

TiO₂ photocatalytic coatings were deposited through high velocity oxy-fuel spray using anatase powder and rutile powder as feedstock. The as-sprayed TiO₂ coating was composed of anatase phase and rutile phase. The anatase content in the coating was significantly influenced by fuel gas flow and melting condition of spray powder. A high anatase content of 35% was achieved for the coating deposited using rutile powder. The anatase content in the coating deposited using anatase powder reached 55-65%. The as-sprayed TiO₂ coating was photocatalytically reactive for degradation of acetaldehyde in air. The photocatalytic activity was influenced by spray conditions. The surface morphology and phase structure of coatings deposited at different spray conditions were investigated to clarify the relationship between the coating microstructure and activity. It is found that the photocatalytic activity is significantly influenced by anatase content and surface area.     

Preparation of thermally stable anatase TiO2 photocatalyst from TiOF2 precursor and its photocatalytic activity

Preparation of anatase TiO₂ with high themal stability is of great importance for its environmental application. In this work, TiOF₂ was first synthesized by a simple microwave-assisted hydrothermal route using tetrabutyl titanate and hydrofluoric acid as precursors at 200 °C for 20 min. Then the resulted precipitates were calcined at different temperatures (300-1000 °C) for 2 h. The as-prepared samples were characterized by X-ray diffraction, Raman spectrum, scanning electron microscopy, N₂ adsorption-desorption isotherms and X-ray photoelectron spectroscopy. The photocatalytic activity was evaluated using Brilliant Red X3B, an anionic azo dye, as the target organic molecule under UV light irradiation. The results showed that the prepared TiOF₂ exhibited weak or no photocatalytic activity. The phase transformation of TiOF₂ to anatase TiO₂ occurred at about 300 °C. The prepared anatase TiO₂ from TiOF₂ showed very high thermal stability and the anatase-to-rutile phase transformation temperature was up to 1000 °C. Fluoride ions played an important role in the improvement of thermal stability of anatase TiO₂ by strongly adsorbing on the crystal planes of anatase to stabilize the anatase structure. The 700 °C-calcined sample showed the highest photocatalytic activity due to its relative good crystallization and high specific surface areas.     

Preparation of large scale photocatalytic TiO2 films by the sol-gel process

Nanocrystalline titanium dioxide films were formed on frosted and clear borosilicate glass with a large surface area (12 × 22 cm) using doctor blade and spray coating techniques. The films were subjected to a high temperature treatment at 550 °C. X-ray diffraction (XRD) analysis indicated that the TiO₂ films contain only the anatase phase. Optical microscopy was used to determine the morphology changes after the deposition of each layer. Scanning electron microscopy (SEM) was used to study the films surface morphology. The large scale TiO₂ films produced showed a high photocatalytic activity which was evaluated by the degradation of methyl orange (MO) in aqueous solution (10 mg L^− 1) under illumination of a UV light source with an overall irradiance of 0.9 mW cm^− 2. UV-visible spectrophotometry was used to monitor the degradation of MO through the decrease of the main absorbance peak at 464 nm. The results demonstrated that a complete decomposition of MO could be achieved after 2 h of UV irradiation.     

Properties of TiO2 film prepared from titanium tetrachloride

The properties of TiO₂ film prepared by titanium tetrachloride were investigated with respect to annealing temperatures in terms of phase change, crystallite size, and band gap energy. The TiO₂ film dried at room temperature exhibited an amorphous phase, while films calcined above 281 and at 990°C displayed anatase TiO₂ and a mixture of anatase and rutile, respectively. The TiO₂ film was transformed to an anatase phase through three stages during the annealing processes: (1) removal of water, (2) decomposition of a peroxo group, and (3) amorphous-anatase phase transformation. It was also found that the bandgap energy of TiO₂ film was changed with increasing annealing temperature. This is attributed to the quantum size effect in the range of 475–675°C and to the formation of rutile phase having lower band gap energy than anatase in the range of 675–990°C.     

High pressure electrical resistivity studies on Ni-doped TiO2 nanoparticles

Electrical resistivity measurement of Ni-doped TiO₂ nanoparticles were performed under high pressure using a Bridgman opposed anvil setup. It is observed that, anatase phase nanoparticles shows a sudden increase in resistivity below the pressure limit of 4 GPa and is attributed to the transition from anatase to rutile phase. In addition, the transition limit is shifted towards lower pressure region with increase in dopant concentration. But, Ni-doped TiO₂ nanoparticles with rutile phase shows a rapid decrease in resistivity up to 5 GPa and thereafter it becomes constant. Samples with constant resistivity behavior are mainly ascribed to the semiconductor-metallic transformation.     

Effect of annealing temperature on the structure and optical properties of sputtered TiO2 films

TiO₂ thin films were deposited by DC reactive magnetron sputtering. Some TiO₂ thin films samples were annealed for 5 min at different temperatures from 300 to 900 °C. The structure and optical properties of the films were characterized by X-ray diffraction (XRD), field emission scanning electron microscopy (SEM) and ultraviolet-visible (UV-vis) spectrophotometry, respectively. The influence of the annealing temperature on the structure and optical properties of the films was investigated. The results show that the as-deposited TiO₂ thin films are mixtures of anatase and rutile phases, and possess the column-like crystallite texture. With the annealing temperature increasing, the refractive index and extinction coefficient increase. When the annealing temperature is lower than 900 °C, the anatase phase is the dominant crystalline phase; the weight fraction of the rutile phase does not increase significantly during annealing process. As the annealing temperature rises to 900 °C, the rutile phase with the large extinction coefficient becomes the dominant crystalline phase, and the columnar structure disappears. The films annealed at 300 °C have the best optical properties for the antireflection coatings, whose refractive index and extinction coefficient are 2.42 and 8 × 10⁻⁴ (at 550 nm), respectively.     

Effect of Na diffusion from glass substrate on the microstructural and photocatalytic properties of post-annealed TiO2 films synthesised by reactive sputtering

Amorphous columnar TiO₂ films were synthesised by reactive sputtering on cold soda–lime glass substrates (TiO₂/glass films). The films were subsequently heated in order to crystallise the photoactive anatase phase. The surface chemical composition assessment demonstrates the occurrence of metallic Na, the amount of which increases with the annealing temperature. The evolution of the structural, microstructural and photocatalytic properties of the films with the annealing temperature was investigated and compared to that of TiO₂ films deposited in same conditions, but on glass pre-coated with a SiN_x diffusion barrier (TiO₂/SiN_x/glass films). Once crystallised, both series of TiO₂ films exhibit [001] preferential orientation corresponding to the columnar growth. Grain coalescence associated to a modification of the grain shape is only observed in TiO₂/glass films for annealing temperatures higher than 450 °C, whereas neither microstructural nor structural change is observed in TiO₂/SiN_x/glass films. The Na-contaminated TiO₂ films exhibit different photocatalytic behaviour with the annealing temperature compared to the Na-free TiO₂ films. A discussion is finally based on these differences.     

Thermal treatment effect on structure, electrical conductivity and transient photoconductivity behavior of thiourea modified TiO2 sol-gel thin films

Thiourea modified nanocrystalline titanium dioxide (TiO₂) thin films were prepared by sol-gel route and were thermally treated at five different temperatures (400, 500, 600, 800 and 1000 °C). The films were studied using GIXRD, PIGE and UV-vis spectroscopy. It was observed that the anatase to rutile phase transformation of TiO₂ was inhibited by the thiourea modification. The transmittance of the modified films appeared reduced which was attributed both to the modification of TiO₂ with thiourea and the light scattering in the films. The dark conductivity and the transient photoconductivity of the modified TiO₂ sol-gel thin films were studied in vacuum and in air. The environment does not influence significantly the dark conductivity, because of the almost equivalent competition between oxygen and water adsorption. The photoconductivity reaches high values for all samples in both environments, with the sample treated at 500 °C to present the highest value. The larger values in vacuum can be attributed to the reduced amount of adsorbed oxygen at the surface, which acts as electron scavenger.     

Nanostructured Photocatalytic TiO<Subscript>2</Subscript> Coating Deposited by Suspension Plasma Spraying with Different Injection Positions

High plasma power is beneficial for the deposition efficiency and adhesive strength of suspension-sprayed photocatalytic TiO₂ coatings, but it confronts two challenges: one is the reduced activity due to the critical phase transformation of anatase into rutile, and the other is fragmented droplets which cannot be easily injected into the plasma core. Here, TiO₂ coatings were deposited at high plasma power and the position of suspension injection was varied with the guidance of numerical simulation. The simulation was based on a realistic three-dimensional time-dependent numerical model that included the inside and outside of torch regions. Scanning electron microscopy was performed to study the microstructure of the TiO₂ coatings, whereas x-ray diffraction was adopted to analyze phase composition. Meanwhile, photocatalytic activities of the manufactured TiO₂ coatings were evaluated by the degradation of an aqueous solution of methylene blue dye. Fragmented droplets were uniformly injected into the plasma jet, and the solidification pathway of melting particles was modified by varying the position of suspension injection. A nanostructured TiO₂ coating with 93.9% anatase content was obtained at high plasma power (48.1 kW), and the adhesive coating bonding to stainless steel exhibited the desired photocatalytic activity.     

Redox abilities of rutile TiO2 ultrafine powder in aqueous solutions

Redox abilities of rutile TiO₂ powder with an acicular primary particle, having about a 200 m²/g BET surface area obtained by a homogeneous precipitation process in aqueous TiOCl₂ solution at 50°C for 4 hrs, were investigated using a photocatalytic reaction in aqueous 4-chlorophenol, Cu- and Pb-EDTA solutions. Its abilities were then compared with those of commercial P-25 powder, together with investigating those of anatase TiO₂ powder obtained from the aqueous TiOCl₂ solution, having a similar surface area and primary particle shape as those of the rutile powder. The powder was more effective than the anatase or P-25 powder, while the anatase powder unexpectedly showed the slowest decomposition rate and the smallest amount in the same experiments in spite of similar particle shapes and surface area. From the results, it is found that the excellent photo redox abilities of the powder is likely to be caused by the specific powder preparation method regardless of crystalline structures even when having similar particle shapes and values in the surface area. Also, many OH⁻ attached to the surface of the TiO₂ particle appeared to interfere with the adsorption of decomposing target materials to the TiO₂ surface in the solution during the photocatalytic reaction, resulting in a delay in the reaction.     

Osteoblast growth behavior on micro-arc oxidized β-titanium alloy

β-titanium (β-Ti) alloys are known for their excellent physical properties and biocompatibility, and are therefore considered as next-generation metals for orthopedics and dental implants. To improve the osseous integration between β-Ti alloys and bone, this study develops a titanium dioxide (TiO₂) coating on the surface of β-Ti alloys by using micro-arc oxidation (MAO) technique. The anatase (A) rich and rutile (R) rich TiO₂ layer, were formed on β-Ti, respectively. In vitro tests were carried out using pre-osteoblast cell (MC3T3-E1) to determine biocompatibility and bone formation performance. Biocompatibility includes cell adhesion, cell proliferation, and alkaline phosphatase (ALP) activity, while the bone formation performance contains osteopontin (OPN), osteocalcin (OCN) and calcium content. Cell morphology was also observed. In addition, raw β-Ti, A rich TiO₂ and R rich TiO₂ were implanted into the distal femora of Japanese white rabbits for 4, 8, and 12 weeks to evaluate its in vivo performance.Experimental results show that TiO₂ coating can be grown on and well-adhered to β-Ti. The anatase phase formed under a low applied voltage (350 V), while the rutile phase formed under a high applied voltage (450 V), indicating that crystal structure is strongly influenced by applied voltage. A porous morphology was obtained in the TiO₂ coating regardless of the crystal structure and exhibited superior bone formation performance than β-Ti. In vivo analysis and in vitro test show similar trends. It is also noticeable that the R rich TiO₂ coating achieved better biocompatibility, osteogenesis performance. Therefore, a MAO-treated R rich TiO₂ coating can serve as a novel surface modification technique for β-Ti alloy implants.     

Transparent conducting oxide films of heavily Nb-doped titania by reactive co-sputtering

Niobium-doped titania (TNO) films of various Nb content were deposited on glass and silicon substrates by reactive co-sputtering of Ti and Nb metal targets. Nb content in the TNO films was varied from 0 to ∼13 at.% (atomic percent), corresponding to Ti_1−xNb_xO₂ with x = 0-0.52, by modulating the Nb target power from 0 to 150 W (Watts). The influence of ion bombardment on the TNO films was investigated by applying an RF substrate bias from 0 to 25 W. The as-deposited TNO films were all amorphous and insulating, but after annealing at 600 °C for 1 h in hydrogen, they became crystalline and conductive. The annealed films crystallized into either pure anatase or mixed anatase and rutile structures. The as-deposited and the annealed films were transparent, with an average transmittance above 70%. Anatase TNO film (Ti_1−0.39Nb_0.39O₂) with Nb 9.7 at.% exhibited a dramatically reduced resistivity of 9.2 × 10⁻⁴ Ω cm, a carrier density of 6.6 × 10²¹ cm⁻³ and a carrier mobility around 1.0 cm² V⁻¹ s⁻¹. In contrast, the mixed-phase Ti_1−0.39Nb_0.39O₂ showed a higher resistivity of 1.2 × 10⁻¹ Ω cm. This work demonstrates that the anatase phase, oxygen vacancies, and Nb dopants are all important factors in achieving high conductivities in TNO films.     

Phase formation of nano-TiO<Subscript>2</Subscript> particles during flame spraying with liquid feedstock

The nanostructured TiO₂ photocatalytic coatings were synthesized through flame spraying with liquid feedstock under different conditions. The nanostructured TiO₂ deposit of substantial anatase phase was annealed at different temperatures. X-ray diffraction analysis showed that significant transformation from anatase to rutile occurred at a temperature above 600 °C. However, thermal analysis suggested that the phase transformation from anatase to rutile started at a temperature from 400 to 500°C. It was found that the grain size of rutile phase was larger than that of anatase. The deposits annealed at temperatures lower than 450°C were photocatalytically active. However, the deposit annealed at 500°C, which contained 95% anatase crystalline, became photocatalytically inactive. Based on the experimental findings, a model is proposed to explain the phase transformation of the nano-TiO₂ particles and the phase formation in flame-spraying of nanostructured TiO₂ deposit with liquid feedstock. The original version of this paper was published as part of the DVS Proceedings: “Thermal Spray Solutions: Advances in Technology and Application,” International Thermal Spray Conference, Osaka, Japan, 10–12 May 2004, CD-Rom, DVS-Verlag GmbH, Düsseldorf, Germany.     

SnO2@TiO2核-壳纳米线的制备及其光催化性能研究

本文通过固-液-气(VLS)生长机制,利用化学气相沉积法(CVD)制备SnO₂纳米线。利用原子层沉积(ALD)以钛酸四异丙酯为前驱体在SnO₂纳米线表面沉积不同厚度的TiO₂壳层,形成SnO₂@TiO₂核-壳纳米线结构。通过中间Al₂O₃插层,分别制备出金红石和锐钛矿两种不同晶型的TiO₂,从而制备出两种不同复合结构的SnO₂@TiO₂核-壳纳米线。实验研究该复合结构中TiO₂的厚度与晶型对紫外光下光催化降解甲基橙溶液活性的影响。     

Laser-induced enhancement of the surface hardness of nanoparticulate TiO2 self-cleaning layer

We here report that the abrasion resistance of nanoparticulate TiO₂ self-cleaning layers can be highly enhanced without a considerable loss of photocatalytic capability. TiO₂ coating layers solution-deposited onto the glass substrate were irradiated by a pulsed ultraviolet (UV) laser at 355 nm, which modified the surface morphologies via laser-induced local melting of TiO₂ nanoparticles. The surface hardness, measured by pencil scratch test, improved with increasing laser power (P). While an unmodified TiO₂ layer revealed a hardness of 6B, it increased to 2H after the surface was irradiated at P = 0.3 W. Almost all of the stearic acid deposited on an unmodified sample disappeared after UV exposure for 12 h. The photocatalytic decomposition was slowed down on laser-irradiated TiO₂ surfaces and this is attributed to the reduction of specific surface areas as a result of the morphological modifications. However, a TiO₂ layer hardened to 2H still exhibited fairly good photocatalytic activity, decomposing more than 75% of the stearic acid after exposure for the same duration.     

Sputter deposition and computational study of M-TiO2 (M = Nb, Ta) transparent conducting oxide films

Titanium dioxide (TiO₂) of the anatase phase has recently attracted much attention as a novel transparent conducting oxide (TCO) due to its rich availability, high refractive index with low absorption in the solar spectrum. While it has been found that Nb is a dopant to obtain low resistivity (~ 10^− 4 Ωcm), other metals such as Ta, W etc., are also considered as potential effective dopants. In this paper, we carried out a parallel study on Nb- and Ta-doped TiO₂ anatase films both theoretically by first principles calculation and experimentally by sputtering deposition and optical/electrical characterizations. The Nb-TiO₂ films deposited on glass by co-sputtering at room temperature were amorphous, and the films crystallized into an anatase structure after vacuum-annealing, with the measured resistivity values comparative to the reported. The Ta-TiO₂ films were deposited similarly, and the structure and properties were compared with the Nb-doped ones. Results showed that better performance was found in Nb-TiO₂ films than that in Ta-TiO₂ films. Theoretical calculations indicate that the larger lattice distortion by substitution of Ta for Ti is the dominating factor to suppress crystal growth and weaken the ability of electron mobility.