Evaluation of chiral dopants for LCD applications

Abstract— A large number of new synthesized as well as known chiral dopants with respect to their helical twisting power (HTP), the phase stability of cholesteric solution prepared by doping nematic LC mixtures, the host dependence of the chiral induction, and the photostability has been examined. The evaluation led to the result that only few compounds fulfill the stringent application requirements of LCD manufacturing, especially with reference to bistable cholesteric devices.     

Tailored elliptical holographic diffusers for LCD applications

Abstract— In this paper, an LCD backlight with holographic diffusers as the top diffuser was investigated. Using a suitable elliptical holographic diffuser, the moiré pattern was eliminated and the brightness of the backlight was increased up to 15% compared to that for a backlight with a conventional diffuser. A Monte Carlo simulation was also applied to compare with the experimental results. In addition, elliptical diffusers can be applied to modify the viewing cone of the backlight.     

Ferroelectric properties of LC systems including chiral dopants with different molecular structure

Abstract— New ferroelectric liquid crystals (FLCs) on the basis of the eutectic mixture of phenylbenzoate derivatives including chiral components (CCs) with a different number and position of carbonyl groups in their molecular core have been investigated. The ferroelectric characteristics such as the spontaneous polarization, smectic tilt angle, rotational viscosity, and repolarization time as well as their concentration dependences are analyzed. On the basis of the previous and obtained results, the influence of peculiarities of the molecular structure of CCs on mentioned properties of FLCs are generalized.     

Optimized LCD backlight for outdoor and high‐brightness applications

A high‐intensity backlight for use with large LCD panels has been developed. It supports the performance and environmental requirements of a display intended for outdoor applications. This backlight technology uses an inductively coupled electrodeless fluorescent lamp with a lifetime of 100,000 hours, instant starting at ?40°C and a stable light output over a temperature span of 70°C. The backlight design has been optimized for luminance uniformity and efficiency within a display depth of 6 in. A 21.3‐in. LCD monitor, using this backlight technology, provides an image brightness of 2000 cd/m² from a single 150‐W lamp.     

Electromagnetic characterization of chiral auxetic metamaterials for EMC applications

A new class of auxetic materials, a hexachiral honeycomb structure with good mechanical properties, is investigated through computer simulation and measurement. The electromagnetic properties for shielding applications are taken into account. This new material shows some interesting EMC properties (e.g. − 40 dB transmittance at 2.4 GHz) and promises better performance using different insertion techniques.     

LCD applications of thin‐crystal‐film polarizers

Abstract— We have developed a new technique for the production of thin crystal film (TCF) by deposition, molecular alignment, and the drying of water‐based lyotropic‐liquid‐crystal (LLC) materials. TCF exhibits high optical anisotropy and birefringence. This paper presents liquid‐crystal‐display (LCD) applications and opportunities for TCF plastic sheet polarizers, retarders, and color‐correction films as well as LCD designs with TCF internal polarizers.     

Multi‐primary‐color LCD: Its characteristics and extended applications

Abstract— The development of multi‐primary‐color (MPC) display systems is one of the big paradigm shifts in recent display technologies and induces new potentials of display devices. The development of MPC display systems for different goals is briefly reviewed. Especially, by employing MPC systems, it is possible to reproduce the real material colors faithfully and efficiently. For signal processing, MPC systems have a big advantage in the so‐called color‐reproduction redundancy. A number of applications can be derived from this characteristic, such as improving the viewing‐angle dependency issue and power savings. On the other hand, MPC systems have a typical trade‐off versus RGB‐standardized input signals, especially for reproducing bright green. New algorithms to moderate this trade‐off on MPC systems by employing color‐reproduction redundancy are proposed. The goal of our algorithms is to maintain the compatibility with RGB‐based input signals though the initial display design so that the characteristics of MPC systems are not changed or lost. These algorithms indicate that MPC display systems are applicable not only for a specifically limited objective but also for other applications, e.g., TV broadcasting.     

PECVD films for low‐temperature poly‐Si TFT‐LCD applications

Low‐temperature polycrystalline‐silicon (poly‐Si) thin‐film‐transistor (TFT) processes, based on PECVD amorphous‐silicon (a‐Si:H) precursor films and excimer‐laser crystallization, have been developed for application in the fabrication of active‐matrix liquid‐crystal‐displays (AMLCDs). The optimum process for depositing the precursor films has been identified. The relationship between excimer‐laser crystallization and poly‐Si film morphology has also been studied. Using these techniques, poly‐Si TFTs with a mobility of 275 cm²/V‐sec and on/off ratios of 1 × 10⁷ have been fabricated.     

TFT‐LCD driver IC with embedded non‐volatile memory for portable applications

Abstract— To improve the display quality and yield of the TFT‐LCD driver IC, non‐volatile multiple‐time‐programmable (MTP) memory, which consists of an EEPROM cell and our proposed sense amplifier and power control circuit (SP), was integrated into a TFT‐LCD driver IC. The proposed SP has a 30% smaller layout area and a 18% faster response time compared to that of the conventional SP. The proposed SP also has lower power consumption because it does not use a static current. The TFT‐LCD quality was also improved by tuning the characteristics of the driver IC and the panel with the VREF, OSC, and VCOM blocks, using non‐volatile MTP memory. When the display quality improved, the yield also improved, along with a reduction in the failure ratio of the display module, which consists of the driver IC and the panel. As a result, the TFT‐LCD driver IC with the non‐volatile MTP memory demonstrated improved display quality and a higher yield compared to conventional driver ICs without such a memory.     

A fast‐switching OCB‐mode LCD for high‐quality display applications

Abstract— Optically compensated bend (OCB) mode is a promising technology, due to its wide range of viewing angles without gray‐scale inversion or color shift, fast response, high contrast ratio, and wide temperature range. This paper summarizes the fundamental characteristics of OCB mode and discusses the development of field‐sequential‐color displays and 3‐D displays for future high‐quality display applications.     

Consideration of LCD legibility for automobiles

Some improvement is required in legibility of liquid crystal displays for them to be used in cars. Many factors - for example LCD material characteristics, cell gap, polarizers, operating conditions and instrument panels arrangements - influence the legibility. The dependence of contrast, viewing angle and response on such factors was investigated and a method of using LCDs for automobiles established.     

LED backlighting for LCD HDTV

Light‐emitting diodes (LEDs) are used today for backlighting of small displays such as PDAs and mobile phones. We show in this paper that a new LED technology can be used for high‐demanding display‐backlighting applications such as LCD HDTV. Using this new type of emitter, called a Luxeon? Power Light Source, a brightness higher than an edge‐lit CCFL backlight can be achieved, while compared to a direct‐lit CCFL backlight the thickness is lower and the uniformity is better. With on‐going improvements in LED performance over the coming years, LED backlights will reach and even outperform the brightness performance of direct‐lit backlights while maintaining the benefits of edge‐lit solutions at even higher brightness levels.     

Influence of the rigidity of the steroid core in the structure of chiral dopants on the temperature dependence of cholesteric short pitch

New chiral compounds of the steroid type, namely, 3-alkanoyl- and 3-alkyl derivatives of 16-arylidene estrone, were synthesized and exhibited high helical twisting power (HTP) in nematic liquid crystals E63 and LC-1289. The peculiarities of the molecular structure of chiral compounds (CCs) and their high degree of chirality were discussed. Quite small concentrations of chiral compounds in both nematic solvents were needed to obtain a short-pitch cholesteric helical macrostructure with the selective light reflection in the visible range of the spectrum. The insignificant temperature dependence of the maximum wavelength of the selective light reflection obtained on the whole cholesteric range for all studied liquid crystalline (LC) systems could be related to relatively rigid molecular structure of the chiral compounds. The cholesteric LC mixtures comprising 3-alkanoyl- and 3-alkyl derivatives of 16-arylidene estrone were characterized by the phase stability and the stability of reflective characteristics in time that makes it possible to consider this series of dopants as appropriate for development of bistable cholesteric reflective LC displays.     

Chemical gas sensors using chiral nematic liquid crystals and its applications

This paper clarifies the relationship between the molecular structures of chiral nematic liquid crystals and the shift in their reflection spectrum resulting from contact with volatile organic compounds (VOCs). We also propose a mechanism to explain the red‐ or blue‐shift in the peak wavelength upon contact with VOC vapor. Furthermore, enhancement of the sensitivity of this method of VOC detection is discussed.