Interparticle Forces Underlying Nanoparticle Self‐Assemblies

Studies on the self‐assembly of nanoparticles have been a hot topic in nanotechnology for decades and still remain relevant for the present and future due to their tunable collective properties as well as their remarkable applications to a wide range of fields. The novel properties of nanoparticle assemblies arise from their internal interactions and assemblies with the desired architecture key to constructing novel nanodevices. Therefore, a comprehensive understanding of the interparticle forces of nanoparticle self‐assemblies is a pre‐requisite to the design and control of the assembly processes, so as to fabricate the ideal nanomaterial and nanoproducts. Here, different categories of interparticle forces are classified and discussed according to their origins, behaviors and functions during the assembly processes, and the induced collective properties of the corresponding nanoparticle assemblies. Common interparticle forces, such as van der Waals forces, electrostatic interactions, electromagnetic dipole‐dipole interactions, hydrogen bonds, solvophonic interactions, and depletion interactions are discussed in detail. In addition, new categories of assembly principles are summarized and introduced. These are termed template‐mediated interactions and shape‐complementary interactions. A deep understanding of the interactions inside self‐assembled nanoparticles, and a broader perspective for the future synthesis and fabrication of these promising nanomaterials is provided.     

Real‐Time Tracking of Superparamagnetic Nanoparticle Self‐Assembly

The spontaneous self‐assembly process of superparamagnetic nanoparticles in a fast‐drying colloidal drop is observed in real time. The grazing‐incidence small‐angle X‐ray scattering (GISAXS) technique is employed for an in situ tracking of the reciprocal space, with a 3 ms delay time between subsequent frames delivered by a new generation of X‐ray cameras. A focused synchrotron beam and sophisticated sample oscillations make it possible to relate the dynamic reciprocal to direct space features and to localize the self‐assembly. In particular, no nanoparticle ordering is found inside the evaporating drop and near‐surface region down to a drop thickness of 90 µm. Scanning through the shrinking drop‐contact line indicates the start of self‐assembly near the drop three‐phase interface, in accord with theoretical predictions. The results obtained have direct implications for establishing the self‐assembly process as a routine technological step in the preparation of new nanostructures.     

Interplay between Short‐ and Long‐Ranged Forces Leading to the Formation of Ag Nanoparticle Superlattice

Nanoparticle (NP) superlattices have attracted increasing attention due to their unique physicochemical properties. However, key questions persist regarding the correlation between short‐ and long‐range driving forces for nanoparticle assembly and resultant capability to predict the transient and final superlattice structure. Here the self‐assembly of Ag NPs in aqueous solutions is investigated by employing in situ liquid cell transmission electron microscopy, combined with atomic force microscopy‐based force measurements, and theoretical calculations. Despite the NPs exhibiting instantaneous Brownian motion, it is found that the dynamic behavior of NPs is correlated with the van der Waals force, sometimes unexpectedly over relatively large particle separations. After the NPs assemble into clusters, a delicate balance between the hydration and van der Waals forces results in a distinct distribution of particle separation, which is ascribed to layers of hydrated ions adsorbed on the NP surface. The study demonstrates pivotal roles of the complicated correlation between interparticle forces; potentially enabling the control of particle separation, which is critical for tailoring the properties of NP superlattices.     

Nanoparticle Interactions Guided by Shape‐Dependent Hydrophobic Forces

Self‐assembly of solvated nanoparticles (NPs) is governed by numerous competing interactions. However, relatively little is known about the time‐dependent mechanisms through which these interactions enable and guide the nanoparticle self‐assembly process. Here, using in situ transmission electron microscopy imaging combined with atomistic modeling, it is shown that the forces governing the self‐assembly of hydrophobic nanoparticles change with the nanoparticle shapes. By comparing how gold nanospheres, nanocubes, nanorods, and nanobipyramids assemble, it is shown that the strength of the hydrophobic interactions depends on the overlap of the hydrophobic regions of the interacting nanoparticle surfaces determined by the nanoparticle shapes. Specifically, this study reveals that, in contrast to spherical nanoparticles, where van der Waals forces play an important role, hydrophobic interactions can be more relevant for nanocubes with flat side faces, where an oriented attachment between the nanocubes is promoted by these interactions. The attachment of nanocubes is observed to proceed in two distinct pathways: nanocubes either: (i) prealign their faces before the attachment, or (ii) first connect through a misaligned (edge‐to‐edge) attachment, followed by a postattachment alignment of their faces. These results have important implications for understanding the interaction dynamics of NPs and provide the framework for the design of future self‐assembled nanomaterials.     

Dynamics of Templated Assembly of Nanoparticle Filaments within Nanochannels

Nanoparticles (NPs) can self‐assemble into complex, organized superstructures on patterned surfaces through fluid‐mediated interactions. However, the detailed mechanisms for such NP assemblies are largely unknown. Here, using in situ transmission electron microscopy, the stepwise self‐assembly dynamics of hydrophobic gold NPs into long filaments formed on the surfaces of water‐filled patterned nanochannel templates is observed. First, the formation of a meniscus between the nanochannel walls, during the slow drying of water, causes accumulation of the NPs in the middle of the nanochannels. Second, owing to the strong van der Waals attraction between the NP ligands, the NPs condense into filaments along the centers of the nanochannels. Filaments with highly fluctuating longitudinal NP densities are also observed to fragment into separated structures. Understanding the intermediate stages of fluid‐mediated NP self‐assembly on patterned surfaces will have important implications for the controlled formation of templated NP assemblies with numerous applications.     

Self‐Assembly: I‐Motif Nanospheres: Unusual Self‐Assembly of Long Cytosine Strands (Small 8/2011)

The synthesis and characterization of novel DNA structures based on tetraplex cytosine (C) arrangements, known as i‐motifs or i‐tetraplexes, is reported. Atomic force microscopy (AFM) investigation shows that long C‐strands in mild acidic conditions form compact spherically shaped nanostructures. The DNA nanospheres are characterized by a typical uniform shape and narrow height distribution. Electrostatic force microscopy (EFM) measurements performed on the i‐motif spheres clearly show their electrical polarizability. Further investigations by scanning tunneling microscopy (STM) at ultrahigh vacuum reveals that the structures exhibit an average voltage gap of 1.9 eV, which is narrower than the voltage gap previously measured for poly(dG)–poly(dC) molecules in similar conditions.     

Magnetic Plasmon Networks Programmed by Molecular Self‐Assembly

Nanoscale manipulation of magnetic fields has been a long‐term pursuit in plasmonics and metamaterials, as it can enable a range of appealing optical properties, such as high‐sensitivity circular dichroism, directional scattering, and low‐refractive‐index materials. Inspired by the natural magnetism of aromatic molecules, the cyclic ring cluster of plasmonic nanoparticles (NPs) has been suggested as a promising architecture with induced unnatural magnetism, especially at visible frequencies. However, it remains challenging to assemble plasmonic NPs into complex networks exhibiting strong visible magnetism. Here, a DNA‐origami‐based strategy is introduced to realize molecular self‐assembly of NPs forming complex magnetic architectures, exhibiting emergent properties including anti‐ferromagnetism, purely magnetic‐based Fano resonances, and magnetic surface plasmon polaritons. The basic building block, a gold NP (AuNP) ring consisting of six AuNP seeds, is arranged on a DNA origami frame with nanometer precision. The subsequent hierarchical assembly of the AuNP rings leads to the formation of higher‐order networks of clusters and polymeric chains. Strong emergent plasmonic properties are induced by in situ growth of silver upon the AuNP seeds. This work may facilitate the development of a tunable and scalable DNA‐based strategy for the assembly of optical magnetic circuitry, as well as plasmonic metamaterials with high fidelity.     

Self‐Assembled Large Au Nanoparticle Arrays with Regular Hot Spots for SERS

The cost‐effective self‐assembly of 80 nm Au nanoparticles (NPs) into large‐domain, hexagonally close‐packed arrays for high‐sensitivity and high‐fidelity surface‐enhanced Raman spectroscopy (SERS) is demonstrated. These arrays exhibit specific optical resonances due to strong interparticle coupling, which are well reproduced by finite‐difference time‐domain (FDTD) simulations. The gaps between NPs form a regular lattice of hot spots that enable a large amplification of both photoluminescence and Raman signals. At smaller wavelengths the hot spots are extended away from the minimum‐gap positions, which allows SERS of larger analytes that do not fit into small gaps. Using CdSe quantum dots (QDs) a 3–5 times larger photoluminescence enhancement than previously reported is experimentally demonstrated and an unambiguous estimate of the electromagnetic SERS enhancement factor of ≈10⁴ is obtained by direct scanning electron microscopy imaging of QDs responsible for the Raman signal. Much stronger enhancement of ≈10⁸ is obtained at larger wavelengths for benzenethiol molecules penetrating the NP gaps.     

Colloidal Self‐Assembly Meets Nanofabrication: From Two‐Dimensional Colloidal Crystals to Nanostructure Arrays

Self‐assembly of colloidal microspheres or nanospheres is an effective strategy for fabrication of ordered nanostructures. By combination of colloidal self‐assembly with nanofabrication techniques, two‐dimensional (2D) colloidal crystals have been employed as masks or templates for evaporation, deposition, etching, and imprinting, etc. These methods are defined as “colloidal lithography”, which is now recognized as a facile, inexpensive, and repeatable nanofabrication technique. This paper presents an overview of 2D colloidal crystals and nanostructure arrays fabricated by colloidal lithography. First, different methods for fabricating self‐assembled 2D colloidal crystals and complex 2D colloidal crystal structures are summarized. After that, according to the nanofabrication strategy employed in colloidal lithography, related works are reviewed as colloidal‐crystal‐assisted evaporation, deposition, etching, imprinting, and dewetting, respectively.