Integration of Metal Nanoparticles into Metal–Organic Frameworks for Composite Catalysts: Design and Synthetic Strategy

Metal–organic frameworks (MOFs) are constructed by periodically alternate metal ions with organic ligands, which offer structural diversity and a wide range of interesting properties as an attractive classification of crystalline porous materials. Integration of MOFs with other size‐limited functional centers can supply new multifunctional composites, which exhibit both the properties of the components and new characteristics due to the combination of MOFs with the selected loadings. In recent years, integration of metal/metal oxide nanoparticles (MNPs) into MOFs to form the composite catalysts has attracted considerable attention due to the superior performance. In this review, the latest studies and up‐to‐date developments on the design and synthetic strategy of new MNP@MOF composite catalysts are specifically highlighted. Both the achievements and problems are evaluated and proposed, and the opportunities and challenges of MNP@MOF composite catalysts are discussed.     

Specific K+ Binding Sites as CO2 Traps in a Porous MOF for Enhanced CO2 Selective Sorption

Metal–organic frameworks (MOFs) can be fine‐tuned to boost sorbent‐sorbate interactions in order to improve gas sorption and separation performance, but the design of MOFs with ideal structural features for gas separation applications remains a challenge. Herein it is reported that unsaturated alkali metal sites can be immobilized in MOFs through a tetrazole based motif and that gas affinity can thereby be boosted. In the prototypal MOF of this type‐ NKU‐521 (NKU denotes Nankai University), K⁺ cations are effectively embedded in a trinuclear Co²⁺‐tetrazole coordination motif. The embedded K⁺ sites are exposed to the pores of NKU‐521 through water removal, and the isosteric heat (Q_st) for CO₂ is boosted to 41 kJ mol^‐1. The nature of the binding site is validated by molecular simulations and structural characterization. The K⁺ cations in effect serve as gas traps and boost the CO₂‐framework affinity, as measured by the Q_st, by 24%. In addition, the impact of unsaturated alkali metal sites upon the separation of hydrocarbons is evaluated for the first time in MOFs using ideal adsorbed solution theory (IAST) calculations and column breakthrough experiments. The results reveal that the presence of exposed K⁺ sites benefits gas sorption and hydrocarbon separation performances of this MOF.     

Ultrasmall Metal Nanoparticles Confined within Crystalline Nanoporous Materials: A Fascinating Class of Nanocatalysts

Crystalline nanoporous materials with uniform porous structures, such as zeolites and metal–organic frameworks (MOFs), have proven to be ideal supports to encapsulate ultrasmall metal nanoparticles (MNPs) inside their void nanospaces to generate high‐efficiency nanocatalysts. The nanopore‐encaged metal catalysts exhibit superior catalytic performance as well as high stability and catalytic shape selectivity endowed by the nanoporous matrix. In addition, the synergistic effect of confined MNPs and nanoporous frameworks with active sites can further promote the catalytic activities of the composite catalysts. Herein, recent progress in nanopore‐encaged metal nanocatalysts is reviewed, with a special focus on advances in synthetic strategies for ultrasmall MNPs (<5 nm), clusters, and even single atoms confined within zeolites and MOFs for various heterogeneous catalytic reactions. In addition, some advanced characterization methods to elucidate the atomic‐scale structures of the nanocatalysts are presented, and the current limitations of and future opportunities for these fantastic nanocatalysts are also highlighted and discussed. The aim is to provide some guidance for the rational synthesis of nanopore‐encaged metal catalysts and to inspire their further applications to meet the emerging demands in catalytic fields.     

Alternatives to Cryogenic Distillation: Advanced Porous Materials in Adsorptive Light Olefin/Paraffin Separations

As primary feedstocks in the petrochemical industry, light olefins such as ethylene and propylene are mainly obtained from steam cracking of naphtha and short chain alkanes (ethane and propane). Due to their similar physical properties, the separations of olefins and paraffins—pivotal processes to meet the olefin purity requirement of downstream processing—are typically performed by highly energy‐intensive cryogenic distillation at low temperatures and high pressures. To reduce the energy input and save costs, adsorptive olefin/paraffin separations have been proposed as promising techniques to complement or even replace cryogenic distillation, and growing efforts have been devoted to developing advanced adsorbents to fulfill this challenging task. In this Review, a holistic view of olefin/paraffin separations is first provided by summarizing how different processes have been established to leverage the differences between olefins and paraffins for effective separations. Subsequently, recent advances in the development of porous materials for adsorptive olefin/paraffin separations are highlighted with an emphasis on different separation mechanisms. Last, a perspective on possible directions to push the limit of the research in this field is presented.     

Defective Porous Carbon Polyhedra Decorated with Copper Nanoparticles for Enhanced NIR‐Driven Photothermal Cancer Therapy

Currently, there is tremendous interest in the discovery of new and improved photothermal agents for near‐infrared (NIR)‐driven cancer therapy. Herein, a series of novel photothermal agents, comprising copper nanoparticles supported on defective porous carbon polyhedra are successfully prepared by heating a Cu‐BTC metal–organic framework (MOF) precursor at different temperatures (t) in the range 400–900 °C under an argon atmosphere. The copper nanoparticle size and carbon defect concentration in the obtained products (denoted herein as Cu@CPP‐t) increase with synthesis temperature, thus imparting the Cu@CPP‐t samples with distinct NIR absorption properties and photothermal heating responses. The Cu@CPP‐800 sample shows a remarkable photothermal conversion efficiency of 48.5% under 808 nm laser irradiation, representing one of the highest photothermal efficiencies yet reported for a carbon‐based photothermal agent. In vivo experiments conducted with tumor bearing nude Balb/c mice confirm the efficacy of Cu@CPP‐800 as a very promising NIR‐driven phototherapy agent for cancer treatment. Results encourage the wider use of MOFs as low cost precursors for the synthesis of carbon‐supported metal nanoparticle composites for photothermal therapy.     

Surface‐Mounted Metal–Organic Frameworks: Crystalline and Porous Molecular Assemblies for Fundamental Insights and Advanced Applications

Metal–organic frameworks (MOFs) are crystalline coordination polymers, assembled from inorganic nodes connected by organic linker molecules. An enormous surface area, huge compositional variety, regular structure, and favorable mechanical properties are among their outstanding properties. Monolithic MOF thin films, i.e., surface‐mounted metal–organic frameworks (SURMOFs), with high degree of structural order and adjustable defect density, can be prepared on solid substrates using layer‐by‐layer techniques. Recent studies where SURMOFs served as model systems for quantitative studies of molecular interactions in porous media, including diffusion, are reviewed. Moreover, SURMOFs are ideally suited for the incorporation of photoactive molecules as well as to study electrical transport through crystalline molecular assemblies. Recent work has demonstrated that the realization of crystalline chromophore assemblies via the SURMOF approach allows the study of fundamental aspects of exciton transport, exciton channeling, and photon upconversion at internal interfaces in organic semiconductor materials. Due to their crystalline nature, MOF materials are well suited for quantitative comparisons with theoretical results; especially, since defect densities and types can be characterized and varied in a straightforward fashion. The active role of these nanoporous films in advanced applications, like for remote‐controlled release of molecules, membranes with photoswitchable selectivity, and ion‐conductors with adjustable conductivity, are also emphasized.     

Direct Synthesis of the 2D Copper(II) 5‐Prop‐2‐ynoxyisophthalate MOF: Comment on “Surface Functionalization of Porous Coordination Nanocages Via Click Chemistry and Their Application in Drug Delivery”

Synthesis of metal–organic materials is often dependent on the reaction conditions of suitable solvent/solvent mixture and temperature. A new finding based on a previously described protocol is reported: instead of obtaining metal–organic polyhedra (MOP), a metal–organic framework (MOF) with a 2D layered structure is obtained, following the same reported protocol. The 2D Cu(II)–5‐prop‐2‐ynoxyisophthlate MOF, crystallized in a kagomé‐type structure, is synthesized using different solvent systems at room temperature, as well as under solvothermal (nonhydrothermal) conditions. Under harsh reaction conditions, alkyne functional groups maintain their integrity and the copper does not catalyze the oxidative coupling of the terminal alkyne groups. X‐ray diffraction analyses confirm the structure and phase purity of the product. Based on the present results and the previous work reported by Zhao et al., it seems that two products, namely 0D MOP and 2D MOF, are equally possible when using the same reactants under same reaction conditions. However, the materials obtained in all the trials are MOF instead of MOP. From the structure point of view, there is a difference in connectivity of the initial building units that determines whether the product is MOP or MOF.     

On the Existence of Excitonic Signatures in the Optical Response of Metal–Organic Frameworks: Comment on “van der Waals Metal–Organic Framework as an Excitonic Material for Advanced Photonics”

In a recent experimental paper, it was claimed that pronounced excitonic signatures are observed in optical response of Zn‐based metal–organic frameworks (MOFs) at room temperature. Performing ab initio modelling, it is demonstrated that an alternative interpretation based on single‐electron optical transitions between narrow π‐bands in the system of aromatic rings of the ligand is far more plausible. Although these results do not rule the possibility of exciton formation in MOFs out completely, they show that extreme caution should be taken in attributing the features in photoabsorption spectra alone to excitons, and additional proof, such as data on long‐distance energy transfer, is necessary.     

Engineering Porous Emitting Framework Nanoparticles with Integrated Sensitizers for Low‐Power Photon Upconversion by Triplet Fusion

The conversion of low‐energy light into photons of higher energy based on sensitized triplet–triplet annihilation (sTTA) upconversion is emerging as the most promising wavelength‐shifting methodology because it operates efficiently at excitation powers as low as the solar irradiance. However, the production of solid‐state upconverters suited for direct integration in devices is still an ongoing challenge owing to the difficulties concerning the organization of two complementary moieties, the triplet sensitizer, and the annihilator, which must interact efficiently. This problem is solved by fabricating porous fluorescent nanoparticles wherein the emitters are integrated into robust covalent architectures. These emitting porous aromatic framework (ePAF) nanoparticles allow intimate interaction with the included metallo‐porphyrin as triplet sensitizers. Remarkably, the high concentration of framed chromophores ensures hopping‐mediated triplet diffusion required for TTA, yet the low density of the framework promotes their high optical features without quenching effects, typical of the solid state. A green‐to‐blue photon upconversion yield as high as 15% is achieved: a record performance among annihilators in a condensed phase. Furthermore, the engineered ePAF architecture containing covalently linked sensitizers produces full‐fledge solid‐state bicomponent particles that behave as autonomous nanodevices.     

An Unprecedented Stimuli‐Controlled Single‐Crystal Reversible Phase Transition of a Metal–Organic Framework and Its Application to a Novel Method of Guest Encapsulation

The flexibility and unexpected dynamic behavior of a third‐generation metal–organic framework are described for the first time. The synthetic strategy is based on the flexibility and spherical shape of dipyridyl‐based carborane linkers that act as pillars between rigid Co/BTB (BTB: 1,3,5‐benzenetricarboxylate) layers, providing a 3D porous structure ( 1 ). A phase transition of the solid can be induced to generate a new, nonporous 2D structure ( 2 ) without any loss of the carborane linkers. The structural transformation is visualized by snapshots of the multistep single‐crystal‐to‐single‐crystal transformation by single‐crystal and powder X‐ray diffraction. Poor hydrogen bond acceptors such as MeOH, CHCl₃ or supercritical CO₂ induce such a 3D to 2D transformation. Remarkably, the transformation is reversible and the 2D phase 2 is further converted back into 1 by heating in dimethylformamide. The energy requirements involved in such processes are investigated using periodic density functional theory calculations. As a proof of concept for potential applications, encapsulation of C₆₀ is achieved by trapping this molecule during the reversible 2D to 3D phase transition, whereas no adsorption is observed by straight solvent diffusion into the pores of the 3D phase.     

Porous Microrod Arrays Constructed by Carbon‐Confined NiCo@NiCoO2 Core@Shell Nanoparticles as Efficient Electrocatalysts for Oxygen Evolution

The study of cost‐efficient and high‐performance electrocatalysts for oxygen evolution reaction (OER) has attracted much attention. Here, porous microrod arrays constructed by carbon‐confined NiCo@NiCoO₂ core@shell nanoparticles (NiCo@NiCoO₂/C PMRAs) are fabricated by the reductive carbonization of bimetallic (Ni, Co) metal–organic framework microrod arrays (denoted as NiCo‐MOF MRAs) and subsequent controlled oxidative calcination. They successfully combine the desired merits including large specific surface areas, high conductivity, and multiple electrocatalytic active sites for OER. In addition, the oxygen vacancies in NiCo@NiCoO₂/C PMRAs significantly improve the conductivity of NiCoO₂ and accelerate the kinetics of OER. The above advantages obviously enhance the electrocatalytic performance of NiCo@NiCoO₂/C PMRAs. The experimental results demonstrate that the NiCo@NiCoO₂/C PMRAs as electrocatalysts exhibit high catalytic activity, low overpotential, and high stability for OER in alkaline media. The strategy reported will open up a new route for the fabrication of porous bimetallic composite electrocatalysts derived from MOFs with controllable morphology for electrochemical energy conversion devices.     

In Situ Fabrication of Ultrasmall Gold Nanoparticles/2D MOFs Hybrid as Nanozyme for Antibacterial Therapy

As one of the common reactive oxygen species, H₂O₂ has been widely used for combating pathogenic bacterial infections. However, the high dosage of H₂O₂ can induce undesired damages to normal tissues and delay wound healing. In this regard, peroxidase‐like nanomaterials serve as promising nanozymes, thanks to their positive promotion toward the antibacterial performance of H₂O₂, while avoiding the toxicity caused by the high concentrations of H₂O₂. In this work, ultrasmall Au nanoparticles (UsAuNPs) are grown on ultrathin 2D metal–organic frameworks (MOFs) via in situ reduction. The formed UsAuNPs/MOFs hybrid features both the advantages of UsAuNPs and ultrathin 2D MOFs, displaying a remarkable peroxidase‐like activity toward H₂O₂ decomposition into toxic hydroxyl radicals (·OH). Results show that the as‐prepared UsAuNPs/MOFs nanozyme exhibits excellent antibacterial properties against both Gram‐negative (Escherichia coli) and Gram‐positive (Staphylococcus aureus) bacteria with the assistance of a low dosage of H₂O₂. Animal experiments indicate that this hybrid material can effectively facilitate wound healing with good biocompatibility. This study reveals the promising potential of a hybrid nanozyme for antibacterial therapy and holds great promise for future clinical applications.     

Site‐Selective Catalysis of a Multifunctional Linear Molecule: The Steric Hindrance of Metal–Organic Framework Channels

The site‐selective reaction of a multifunctional linear molecule requires a suitable catalyst possessing both uniform narrow channel to limit the molecule rotation and a designed active site in the channel. Recently, nanoparticles (NPs) were incorporated in metal–organic frameworks (MOFs) with the tailorable porosity and ordered nanochannel, which makes these materials (NPs/MOFs) highly promising candidates as catalytic nanoreactors in the field of heterogeneous catalysis. Inspired by a “Gondola” sailing in narrow “Venetian Canal” without sufficient space for a U‐turn, a simple heterogeneous catalyst based on NPs/MOFs is developed that exhibits site‐selectivity for the oxidation of diols by restricting the random rotation of the molecule (the “Gondola”) in the limited space of the MOF channel (the narrow “Venetian Canal”), thereby protecting the middle functional group via steric hindrance. This strategy is not limited to the oxidation of diols, but can be extended to the site‐selective reaction of many similar multifunctional linear molecules, such as the reduction of alkadienes.