Efficient Laser‐Induced Construction of Oxygen‐Vacancy Abundant Nano‐ZnCo2O4/Porous Reduced Graphene Oxide Hybrids toward Exceptional Capacitive Lithium Storage

Recently, binary ZnCo₂O₄ has drawn enormous attention for lithium‐ion batteries (LIBs) as attractive anode owing to its large theoretical capacity and good environmental benignity. However, the modest electrical conductivity and serious volumetric effect/particle agglomeration over cycling hinder its extensive applications. To address the concerns, herein, a rapid laser‐irradiation methodology is firstly devised toward efficient synthesis of oxygen‐vacancy abundant nano‐ZnCo₂O₄/porous reduced graphene oxide (rGO) hybrids as anodes for LIBs. The synergistic contributions from nano‐dimensional ZnCo₂O₄ with rich oxygen vacancies and flexible rGO guarantee abundant active sites, fast electron/ion transport, and robust structural stability, and inhibit the agglomeration of nanoscale ZnCo₂O₄, favoring for superb electrochemical lithium‐storage performance. More encouragingly, the optimal L‐ZCO@rGO‐30 anode exhibits a large reversible capacity of ≈1053 mAh g^?1 at 0.05 A g^?1, excellent cycling stability (≈746 mAh g^?1 at 1.0 A g^?1 after 250 cycles), and preeminent rate capability (≈686 mAh g^?1 at 3.2 A g^?1). Further kinetic analysis corroborates that the capacitive‐controlled process dominates the involved electrochemical reactions of hybrid anodes. More significantly, this rational design holds the promise of being extended for smart fabrication of other oxygen‐vacancy abundant metal oxide/porous rGO hybrids toward advanced LIBs and beyond.     

Flexible and Binder‐Free Electrodes of Sb/rGO and Na3V2(PO4)3/rGO Nanocomposites for Sodium‐Ion Batteries

Flexible power sources have shown great promise in next‐generation bendable, implantable, and wearable electronic systems. Here, flexible and binder‐free electrodes of Na₃V₂(PO₄)₃/reduced graphene oxide (NVP/rGO) and Sb/rGO nanocomposites for sodium‐ion batteries are reported. The Sb/rGO and NVP/rGO paper electrodes with high flexibility and tailorability can be easily fabricated. Sb and NVP nanoparticles are embedded homogenously in the interconnected framework of rGO nanosheets, which provides structurally stable hosts for Na‐ion intercalation and deintercalation. The NVP/rGO paper‐like cathode delivers a reversible capacity of 113 mAh g^?1 at 100 mA g^?1 and high capacity retention of ≈96.6% after 120 cycles. The Sb/rGO paper‐like anode gives a highly reversible capacity of 612 mAh g^?1 at 100 mA g^?1, an excellent rate capacity up to 30 C, and a good cycle performance. Moreover, the sodium‐ion full cell of NVP/rGO//Sb/rGO has been fabricated, delivering a highly reversible capacity of ≈400 mAh g^?1 at a current density of 100 mA g^?1 after 100 charge/discharge cycles. This work may provide promising electrode candidates for developing next‐generation energy‐storage devices with high capacity and long cycle life.     

Flexible 3D Porous MXene Foam for High‐Performance Lithium‐Ion Batteries

2D transition‐metal carbides and nitrides, named MXenes, are promising materials for energy storage, but suffer from aggregation and restacking of the 2D nanosheets, which limits their electrochemical performance. In order to overcome this problem and realize the full potential of MXene nanosheets, a 3D MXene foam with developed porous structure is established via a simple sulfur‐template method, which is freestanding, flexible, and highly conductive, and can be directly used as the electrode in lithium‐ion batteries. The 3D porous architecture of the MXene foam offers massive active sites to enhance the lithium storage capacity. Moreover, its foam structure facilitates electrolyte infiltration for fast Li⁺ transfer. As a result, this flexible 3D porous MXene foam exhibits significantly enhanced capacity of 455.5 mAh g^?1 at 50 mA g^?1, excellent rate performance (101 mAh g^?1 at 18 A g^?1), and superior ultralong‐term cycle stability (220 mAh g^?1 at 1 A g^?1 after 3500 cycles). This work not only demonstrates the great superiority of the 3D porous MXene foam but also proposes the sulfur‐template method for controllable constructing of the 3D foam from 2D nanosheets at a relatively low temperature.     

Ultra‐light Hierarchical Graphene Electrode for Binder‐Free Supercapacitors and Lithium‐Ion Battery Anodes

A mild and environmental‐friendly method is developed for fabricating a 3D interconnected graphene electrode with large‐scale continuity. Such material has interlayer pores between reduced graphene oxide nanosheets and in‐plane pores. Hence, a specific surface area up to 835 m² g⁻¹ and a high powder conductivity up to 400 S m⁻¹ are achieved. For electrochemical applications, the interlayer pores can serve as “ion‐buffering reservoirs” while in‐plane ones act as “channels” for shortening the mass cross‐plane diffusion length, reducing the ion response time, and prevent the interlayer restacking. As binder‐free supercapacitor electrode, it delivers a specific capacitance up to 169 F g⁻¹ with surface‐normalized capacitance close to 21 μF cm⁻² (intrinsic capacitance) and power density up to 7.5 kW kg⁻¹, in 6 m KOH aqueous electrolyte. In the case of lithium‐ion battery anode, it shows remarkable advantages in terms of the initiate reversible Coulombic efficiency (61.3%), high specific capacity (932 mAh g⁻¹ at 100 mA g⁻¹), and robust long‐term retention (93.5% after 600 cycles at 2000 mAh g⁻¹).     

3D Interconnected and Multiwalled Carbon@MoS2@Carbon Hollow Nanocables as Outstanding Anodes for Na‐Ion Batteries

Currently, the specific capacity and cycling performance of various MoS₂/carbon‐based anode materials for Na‐ion storage are far from satisfactory due to the insufficient structural stability of the electrode, incomplete protection of MoS₂ by carbon, difficult access of electrolyte to the electrode interior, as well as inactivity of the adopted carbon matrix. To address these issues, this work presents the rational design and synthesis of 3D interconnected and hollow nanocables composed of multiwalled carbon@MoS₂@carbon. In this architecture, (i) the 3D nanoweb‐like structure brings about excellent mechanical property of the electrode, (ii) the ultrathin MoS₂ nanosheets are sandwiched between and doubly protected by two layers of porous carbon, (iii) the hollow structure of the primary nanofibers facilitates the access of electrolyte to the electrode interior, (iv) the porous and nitrogen‐doping properties of the two carbon materials lead to synergistic Na‐storage of carbon and MoS₂. As a result, this hybrid material as the anode material of Na‐ion battery exhibits fast charge‐transfer reaction, high utilization efficiency, and ultrastability. Outstanding reversible capacity (1045 mAh g^?1), excellent rate behavior (817 mAh g^?1 at 7000 mA g^?1), and good cycling performance (747 mAh g^?1 after 200 cycles at 700 mA g^?1) are obtained.     

Glucose‐Induced Synthesis of 1T‐MoS2/C Hybrid for High‐Rate Lithium‐Ion Batteries

1T phase MoS₂ possesses higher conductivity than the 2H phase, which is a key parameter of electrochemical performance for lithium ion batteries (LIBs). Herein, a 1T‐MoS₂/C hybrid is successfully synthesized through facile hydrothermal method with a proper glucose additive. The synthesized hybrid material is composed of smaller and fewer‐layer 1T‐MoS₂ nanosheets covered by thin carbon layers with an enlarged interlayer spacing of 0.94 nm. When it is used as an anode material for LIBs, the enlarged interlayer spacing facilitates rapid intercalating and deintercalating of lithium ions and accommodates volume change during cycling. The high intrinsic conductivity of 1T‐MoS₂ also contributes to a faster transfer of lithium ions and electrons. Moreover, much smaller and fewer‐layer nanosheets can shorten the diffusion path of lithium ions and accelerate reaction kinetics, leading to an improved electrochemical performance. It delivers a high initial capacity of 920.6 mAh g^?1 at 1 A g^?1 and the capacity can maintain 870 mAh g^?1 even after 300 cycles, showing a superior cycling stability. The electrode presents a high rate performance as well with a reversible capacity of 600 mAh g^?1 at 10 A g^?1. These results show that the 1T‐MoS₂/C hybrid shows potential for use in high‐performance lithium‐ion batteries.     

Ultrathin 2D Mesoporous TiO2/rGO Heterostructure for High‐Performance Lithium Storage

Lithium‐ion batteries (LIBs) have been widely applied and studied as an effective energy supplement for a variety of electronic devices. Titanium dioxide (TiO₂), with a high theoretical capacity (335 mAh g^?1) and low volume expansion ratio upon lithiation, has been considered as one of the most promising anode materials for LIBs. However, the application of TiO₂ is hindered by its low electrical conductivity and slow ionic diffusion rate. Herein, a 2D ultrathin mesoporous TiO₂/reduced graphene (rGO) heterostructure is fabricated via a layer‐by‐layer assembly process. The synergistic effect of ultrathin mesoporous TiO₂ and the rGO nanosheets significantly enhances the ionic diffusion and electron conductivity of the composite. The introduced 2D mesoporous heterostructure delivers a significantly improved capacity of 350 mAh g^?1 at a current density of 200 mA g^?1 and excellent cycling stability, with a capacity of 245 mAh g^?1 maintained over 1000 cycles at a high current density of 1 A g^?1. The in situ transmission electron microscopy analysis indicates that the volume of the as‐prepared 2D heterostructures changes slightly upon the insertion and extraction of Li⁺, thus contributing to the enhanced long‐cycle performance.     

Metallic Graphene‐Like VSe2 Ultrathin Nanosheets: Superior Potassium‐Ion Storage and Their Working Mechanism

Potassium‐ion batteries (KIBs) are receiving increasing interest in grid‐scale energy storage owing to the earth abundant and low cost of potassium resources. However, their development still stays at the infancy stage due to the lack of suitable electrode materials with reversible depotassiation/potassiation behavior, resulting in poor rate performance, low capacity, and cycling stability. Herein, the first example of synthesizing single‐crystalline metallic graphene‐like VSe₂ nanosheets for greatly boosting the performance of KIBs in term of capacity, rate capability, and cycling stability is reported. Benefiting from the unique 2D nanostructure, high electron/K⁺‐ion conductivity, and outstanding pseudocapacitance effects, ultrathin VSe₂ nanosheets show a very high reversible capacity of 366 mAh g^?1 at 100 mA g^?1, a high rate capability of 169 mAh g^?1 at 2000 mA g^?1, and a very low decay of 0.025% per cycle over 500 cycles, which are the best in all the reported anode materials in KIBs. The first‐principles calculations reveal that VSe₂ nanosheets have large adsorption energy and low diffusion barriers for the intercalation of K⁺‐ion. Ex situ X‐ray diffraction analysis indicates that VSe₂ nanosheets undertake a reversible phase evolution by initially proceeding with the K⁺‐ion insertion within VSe₂ layers, followed by the conversion reaction mechanism.     

In Situ Carbon‐Doped Mo(Se0.85S0.15)2 Hierarchical Nanotubes as Stable Anodes for High‐Performance Sodium‐Ion Batteries

Sodium‐ion batteries (SIBs) are promising energy storage devices, but suffer from poor cycling stability and low rate capability. In this work, carbon doped Mo(Se_0.85S_0.15)₂ (i.e., Mo(Se_0.85S_0.15)₂:C) hierarchical nanotubes have been synthesized for the first time and serve as a robust and high‐performance anode material. The hierarchical nanotubes with diameters of 300 nm and wall thicknesses of 50 nm consist of numerous 2D layered nanosheets, and can act as a robust host for sodiation/desodiation cycling. The Mo(Se_0.85S_0.15)₂:C hierarchical nanotubes deliver a discharge capacity of 360 mAh g⁻¹ at a high current density of 2000 mA g⁻¹ and keep a 81.8% capacity retention compared to that at a current density of 50 mA g⁻¹, showing superior rate capability. Comparing with the second cycle discharge capacities, the nanotube anode can maintain capacities of 102.2%, 101.9%, and 97.8% after 100 cycles at current densities of 200, 500, and 1000 mA g⁻¹, respectively. This work demonstrates the best cycling performance and high‐rate sodium storage capabilities of MoSe₂ for SIBs to date. The hollow interior, hierarchical organization, layered structure, and carbon doping are beneficial for fast Na⁺‐ion and electron kinetics and are responsible for the stable cycling performance and high rate capabilities.     

Core–Shell Structure of Hierarchical Quasi‐Hollow MoS2 Microspheres Encapsulated Porous Carbon as Stable Anode for Li‐Ion Batteries

Monodisperse sulfonated polystyrene (SPS) microspheres are employed as both the template and carbon source to prepare MoS₂ quasi‐hollow microspheres‐encapsulated porous carbon. The synthesis procedure involves the hydrothermal growth of MoS₂ ultrathin nanosheets on the surface of SPS microspheres and subsequent annealing to remove SPS core. Incomplete decomposition of SPS during annealing due to the confining effect of MoS₂ shells leaves residual porous carbon in the interior. When being evaluated as the anode materials of Li‐ion batteries, the as‐prepared C@MoS₂ microspheres exhibit excellent cycling stability (95% of capacity retained after 100 cycles) and high rate behavior (560 mAh g^?1 at 5 A g^?1).     

CoNi2S4 Nanoparticle/Carbon Nanotube Sponge Cathode with Ultrahigh Capacitance for Highly Compressible Asymmetric Supercapacitor

Compared with other flexible energy‐storage devices, the design and construction of the compressible energy‐storage devices face more difficulty because they must accommodate large strain and shape deformations. In the present work, CoNi₂S₄ nanoparticles/3D porous carbon nanotube (CNT) sponge cathode with highly compressible property and excellent capacitance is prepared by electrodepositing CoNi₂S₄ on CNT sponge, in which CoNi₂S₄ nanoparticles with size among 10–15 nm are uniformly anchored on CNT, causing the cathode to show a high compression property and gives high specific capacitance of 1530 F g⁻¹. Meanwhile, Fe₂O₃/CNT sponge anode with specific capacitance of 460 F g⁻¹ in a prolonged voltage window is also prepared by electrodepositing Fe₂O₃ nanosheets on CNT sponge. An asymmetric supercapacitor (CoNi₂S₄/CNT//Fe₂O₃/CNT) is assembled by using CoNi₂S₄/CNT sponge as positive electrode and Fe₂O₃/CNT sponge as negative electrode in 2 m KOH solution. It exhibits excellent energy density of up to 50 Wh kg⁻¹ at a power density of 847 W kg⁻¹ and excellent cycling stability at high compression. Even at a strain of 85%, about 75% of the initial capacitance is retained after 10 000 consecutive cycles. The CoNi₂S₄/CNT//Fe₂O₃/CNT device is a promising candidate for flexible energy devices due to its excellent compressibility and high energy density.     

NixMnyCozO Nanowire/CNT Composite Microspheres with 3D Interconnected Conductive Network Structure via Spray‐Drying Method: A High‐Capacity and Long‐Cycle‐Life Anode Material for Lithium‐Ion Batteries

The combination of high‐capacity and long‐term cycling stability is an important factor for practical application of anode materials for lithium‐ion batteries. Herein, Ni_xMn_yCo_zO nanowire (x + y + z = 1)/carbon nanotube (CNT) composite microspheres with a 3D interconnected conductive network structure (3DICN‐NCS) are prepared via a spray‐drying method. The 3D interconnected conductive network structure can facilitate the penetration of electrolyte into the microspheres and provide excellent connectivity for rapid Li⁺ ion/electron transfer in the microspheres, thus greatly reducing the concentration polarization in the electrode. Additionally, the empty spaces among the nanowires in the network accommodate microsphere volume expansion associated with Li⁺ intercalation during the cycling process, which improves the cycling stability of the electrode. The CNTs distribute uniformly in the microspheres, which act as conductive frameworks to greatly improve the electrical conductivity of the microspheres. As expected, the prepared 3DICN‐NCS demonstrates excellent electrochemical performance, showing a high capacity of 1277 mAh g^?1 at 1 A g^?1 after 2000 cycles and 790 mAh g^?1 at 5 A g^?1 after 1000 cycles. This work demonstrates a universal method to construct a 3D interconnected conductive network structure for anode materials     

Novel 2D Layered Molybdenum Ditelluride Encapsulated in Few‐Layer Graphene as High‐Performance Anode for Lithium‐Ion Batteries

Molybdenum ditelluride nanosheets encapsulated in few‐layer graphene (MoTe₂/FLG) are synthesized by a simple heating method using Te and Mo powder and subsequent ball milling with graphite. The as‐prepared MoTe₂/FLG nanocomposites as anode materials for lithium‐ion batteries exhibit excellent electrochemical performance with a highly reversible capacity of 596.5 mAh g^?1 at 100 mA g^?1, a high rate capability (334.5 mAh g^?1 at 2 A g^?1), and superior cycling stability (capacity retention of 99.5% over 400 cycles at 0.5 A g^?1). Ex situ X‐ray diffraction and transmission electron microscopy are used to explore the lithium storage mechanism of MoTe₂. Moreover, the electrochemical performance of a MoTe₂/FLG//0.35Li₂MnO₃·0.65LiMn_0.5Ni_0.5O₂ full cell is investigated, which displays a reversible capacity of 499 mAh g^?1 (based on the MoTe₂/FLG mass) at 100 mA g^?1 and a capacity retention of 78% over 50 cycles, suggesting the promising application of MoTe₂/FLG for lithium‐ion storage. First‐principles calculations exhibit that the lowest diffusion barrier (0.18 eV) for lithium ions along pathway III in the MoTe₂ layered structure is beneficial for improving the Li intercalation/deintercalation property.     

High‐Performance Flexible Freestanding Anode with Hierarchical 3D Carbon‐Networks/Fe7S8/Graphene for Applicable Sodium‐Ion Batteries

Sodium‐ion batteries (SIBs) have gained tremendous interest for grid scale energy storage system and power energy batteries. However, the current researches of anode for SIBs still face the critical issues of low areal capacity, limited cycle life, and low initial coulombic efficiency for practical application perspective. To solve this issue, a kind of hierarchical 3D carbon‐networks/Fe₇S₈/graphene (CFG) is designed and synthesized as freestanding anode, which is constructed with Fe₇S₈ microparticles well‐welded on 3D‐crosslinked carbon‐networks and embedded in highly conductive graphene film, via a facile and scalable synthetic method. The as‐prepared freestanding electrode CFG represents high areal capacity (2.12 mAh cm^?2 at 0.25 mA cm^?2) and excellent cycle stability of 5000 cycles (0.0095% capacity decay per cycle). The assembled all‐flexible sodium‐ion battery delivers remarkable performance (high areal capacity of 1.42 mAh cm^?2 at 0.3 mA cm^?2 and superior energy density of 144 Wh kg^?1), which are very close to the requirement of practical application. This work not only enlightens the material design and electrode engineering, but also provides a new kind of freestanding high energy density anode with great potential application prospective for SIBs.     

Room‐Temperature Liquid Metal Confined in MXene Paper as a Flexible,Freestanding, and Binder‐Free Anode for Next‐Generation Lithium‐Ion Batteries

Exploring flexible lithium‐ion batteries is required with the ever‐increasing demand for wearable and portable electronic devices. Selecting a flexible conductive substrate accompanying with closely coupled active materials is the key point. Here, a lightweight, flexible, and freestanding MXene/liquid metal paper is fabricated by confining 3 °C GaInSnZn liquid metal in the matrix of MXene paper without any binder or conductive additive. When used as anode for lithium‐ion cells, it can deliver a high discharge capacity of 638.79 mAh g^?1 at 20 mA g^?1. It also exhibits satisfactory rate capacities, with discharge capacities of 507.42, 483.33, 480.22, 452.30, and 404.47 mAh g^?1 at 50, 100, 200, 500, and 1000 mA g^?1, respectively. The cycling performance is obviously improved by slightly reducing the charge–discharge voltage range. The composite paper also has better electrochemical performance than liquid metal coated Cu foil. This study proposes a novel flexible anode by a clever combination of MXene paper and low‐melting point liquid metal, paving the way for next‐generation lithium‐ion batteries.     

Lithium Titanate Cuboid Arrays Grown on Carbon Fiber Cloth for High‐Rate Flexible Lithium‐Ion Batteries

High‐rate performance flexible lithium‐ion batteries are desirable for the realization of wearable electronics. The flexibility of the electrode in the battery is a key requirement for this technology. In the present work, spinel lithium titanate (Li₄Ti₅O₁₂, LTO) cuboid arrays are grown on flexible carbon fiber cloth (CFC) to fabricate a binder‐free composite electrode (LTO@CFC) for flexible lithium‐ion batteries. Experimental results show that the LTO@CFC electrode exhibits a remarkably high‐rate performance with a capacity of 105.8 mAh g^?1 at 50C and an excellent electrochemical stability against cycling (only 2.2% capacity loss after 1000 cycles at 10C). A flexible full cell fabricated with the LTO@CFC as the anode and LiNi_0.5Mn_1.5O₄ coated on Al foil as the cathode displays a reversible capacity of 109.1 mAh g^?1 at 10C, an excellent stability against cycling and a great mechanical stability against bending. The observed high‐rate performance of the LTO@CFC electrode is due to its unique corn‐like architecture with LTO cuboid arrays (corn kernels) grown on CFC (corn cob). This work presents a new approach to preparing LTO‐based composite electrodes with an architecture favorable for ion and electron transport for flexible energy storage devices.     

One‐Pot Hydrothermal Synthesis of FeMoO4 Nanocubes as an Anode Material for Lithium‐Ion Batteries with Excellent Electrochemical Performance

Metal molybdates nanostructures hold great promise as high‐performance electrode materials for next‐generation lithium‐ion batteries. In this work, the facial design and synthesis of monodisperse FeMoO₄ nanocubes with the edge lengths of about 100 nm have been successfully prepared and present as a novel anode material for highly efficient and reversible lithium storage. Well‐defined single‐crystalline FeMoO₄ with high uniformity are first obtained as nanosheets and then self‐aggregated into nanocubes. The morphology of the product is largely controlled by the experimental parameters, such as the reaction temperature and time, the ratio of reactant, the solution viscosity, etc. The molybdate nanostructure would effectively promote the insertion of lithium ions and withstand volume variation upon prolonged charge/discharge cycling. As a result, the FeMoO₄ nanocubes exhibit high reversible capacities of 926 mAh g⁻¹ after 80 cycles at a current density of 100 mA g⁻¹ and remarkable rate performance, which indicate that the FeMoO₄ nanocubes are promising materials for high‐power lithium‐ion battery applications.     

High‐Lithium‐Affinity Chemically Exfoliated 2D Covalent Organic Frameworks

Covalent organic frameworks (COFs) with reversible redox behaviors are potential electrode materials for lithium‐ion batteries (LIBs). However, the sluggish lithium diffusion kinetics, poor electronic conductivity, low reversible capacities, and poor rate performance for most reported COF materials limit their further application. Herein, a new 2D COF (TFPB‐COF) with six unsaturated benzene rings per repeating unit and ordered mesoporous pores (≈2.1 nm) is designed. A chemical stripping strategy is developed to obtain exfoliated few‐layered COF nanosheets (E‐TFPB‐COF), whose restacking is prevented by the in situ formed MnO₂ nanoparticles. Compared with the bulk TFPB‐COF, the exfoliated TFPB‐COF exhibits new active Li‐storage sites associated with conjugated aromatic π electrons by facilitating faster ion/electron kinetics. The E‐TFPB‐COF/MnO₂ and E‐TFPB‐COF electrodes exhibit large reversible capacities of 1359 and 968 mAh g^?1 after 300 cycles with good high‐rate capability.     

Dendrite‐Free Zinc Deposition Induced by Multifunctional CNT Frameworks for Stable Flexible Zn‐Ion Batteries

The current boom of safe and renewable energy storage systems is driving the recent renaissance of Zn‐ion batteries. However, the notorious tip‐induced dendrite growth on the Zn anode restricts their further application. Herein, the first demonstration of constructing a flexible 3D carbon nanotube (CNT) framework as a Zn plating/stripping scaffold is constituted to achieve a dendrite‐free robust Zn anode. Compared with the pristine deposited Zn electrode, the as‐fabricated Zn/CNT anode affords lower Zn nucleation overpotential and more homogeneously distributed electric field, thus being more favorable for highly reversible Zn plating/stripping with satisfactory Coulombic efficiency rather than the formation of Zn dendrites or other byproducts. As a consequence, a highly flexible symmetric cell based on the Zn/CNT anode presents appreciably low voltage hysteresis (27 mV) and superior cycling stability (200 h) with dendrite‐free morphology at 2 mA cm^?2, accompanied by a high depth of discharge (DOD) of 28%. Such distinct performance overmatches most of recently reported Zn‐based anodes. Additionally, this efficient rechargeability of the Zn/CNT anode also enables a substantially stable Zn//MnO₂ battery with 88.7% capacity retention after 1000 cycles and remarkable mechanical flexibility.     

A Flexible Film with SnS2 Nanoparticles Chemically Anchored on 3D‐Graphene Framework for High Areal Density and High Rate Sodium Storage

The design and construction of flexible electrodes that can function at high rates and high areal capacities are essential regarding the practical application of flexible sodium‐ion batteries (SIBs) and other energy storage devices, which remains significantly challenging by far. Herein, a flexible and 3D porous graphene nanosheet/SnS₂ (3D‐GNS/SnS₂) film is reported as a high‐performance SIB electrode. In this hybrid film, the GNS/SnS₂ microblocks serve as pillars to assemble into a 3D porous and interconnected framework, enabling fast electron/ion transport; while the GNS bridges the GNS/SnS₂ microblocks into a flexible framework to provide satisfactorily mechanical strength and long‐range conductivity. Moreover, the SnS₂ nanocrystals, which chemically bond with GNS, provide sufficient active sites for Na storage and ensure the cycling stability. Consequently, this flexible 3D‐GNS/SnS₂ film exhibits excellent Na‐storage performances, especially in terms of high areal capacity (2.45 mAh cm^?2) and high rates with superior stability (385 mAh g^?1 at 1.0 A g^?1 over 1000 cycles with ≈100% retention). A flexible SIB full cell using this anode exhibits high and stable performance under various bending situations. Thus, this work provide a feasible route to prepare flexible electrodes with high practical viability for not only SIBs but also other energy storage devices.