Assessment of high-frequency performance limits of graphene field-effect transistors

High frequency performance limits of graphene field-effect transistors (FETs) down to a channel length of 20 nm have been examined by using self-consistent quantum simulations. The results indicate that although Klein band-to-band tunneling is significant for sub-100 nm graphene FETs, it is possible to achieve a good transconductance and ballistic on-off ratio larger than 3 even at a channel length of 20 nm. At a channel length of 20 nm, the intrinsic cut-off frequency remains at a few THz for various gate insulator thickness values, but a thin gate insulator is necessary for a good transconductance and smaller degradation of cut-off frequency in the presence of parasitic capacitance. The intrinsic cut-off frequency is close to the LC characteristic frequency set by graphene kinetic inductance (L) and quantum capacitance (C), which is about 100 GHz·μm divided by the gate length.      

Layer-by-layer removal of insulating few-layer mica flakes for asymmetric ultra-thin nanopore fabrication

We demonstrate an elaborate method to controllably fabricate ultra-thin nanopores by layer-by-layer removal of insulating few-layer mica flakes with atomic force microscopy (AFM). The fabricated nanopores are geometrically asymmetric, like an inverted quadrangular frustum pyramid. The nanopore geometry can be engineered by finely tuning the mechanical load on the AFM tip and the scanning area. Particularly noteworthy is that the nanopores can also be fabricated in suspended few-layer mica membranes on a silicon window, and may find potential use as functional components in nanofluidic devices.      

A facile one-step synthesis of TiO2/graphene composites for photodegradation of methyl orange

TiO₂/graphene composite photocatalysts have been prepared by a simple liquid phase deposition method using titanium tetrafluoride and electron beam (EB) irradiation-pretreated graphene as the raw materials. The products were characterized by X-ray diffraction, transmission electron microscopy, X-ray photoelectron spectroscopy, and thermogravimetric analysis. The effects of varying the synthesis parameters such as graphene content, concentration of titanium tetrafluoride solution and irradiation dose were investigated. It was found that the preparation conditions had a significant effect on the structure and properties of the final products. The irradiated graphene was covered with petal-like anatase TiO₂ nanoparticles, which were more uniform and smaller in size than those in products synthesized without EB irradiation-pretreated graphene. The photocatalytic activities of the products were evaluated using the photocatalytic degradation of methyl orange as a probe reaction. The results showed that the products synthesized using EB irradiation-pretreated graphene exhibited higher photocatalytic activities than those using graphene without EB irradiation pretreatment.      

Is graphene aromatic?

We analyze the chemical bonding in graphene using a fragmental approach, the adaptive natural density partitioning method, electron sharing indices, and nucleus-independent chemical shift indices. We prove that graphene is aromatic, but its aromaticity is different from the aromaticity in benzene, coronene, or circumcoronene. Aromaticity in graphene is local with two π-electrons delocalized over every hexagon ring. We believe that the chemical bonding picture developed for graphene will be helpful for understanding chemical bonding in defects such as point defects, single-, double-, and multiple vacancies, carbon adatoms, foreign adatoms, substitutional impurities, and new materials that are derivatives of graphene.      

Scanning tunneling microscope observations of non-AB stacking of graphene on Ni films

Microscopic features of graphene segregated on Ni films prior to chemical transfer—including atomic structures of monolayers and bilayers, Moiré patterns due to non-AB stacking, as well as wrinkles and ripples caused by strain effects-have been characterized in detail by high-resolution scanning tunneling microscopy (STM). We found that the stacking geometry of the bilayer graphene usually deviates from the traditional Bernal stacking (or so-called AB stacking), resulting in the formation of a variety of Moiré patterns. The relative rotations inside the bilayer were then qualitatively deduced from the relationship between Moiré patterns and carbon lattices. Moreover, we found that typical defects such as wrinkles and ripples tend to evolve around multi-step boundaries of Ni, thus reflecting strong perturbations from substrate corrugations. These investigations of the morphology and the mechanism of formation of wrinkles and ripples are fundamental topics in graphene research. This work is expected to contribute to the exploration of electronic and transport properties of wrinkles and ripples.      

Sequential assembly of metal-free phthalocyanine on few-layer epitaxial graphene mediated by thickness-dependent surface potential

Due to strong interactions between epitaxial graphene and SiC(0001) substrates, the overlayer charge density induced by the interface charging effect is much more attenuated than that of exfoliated graphene on SiO₂. We report herein a quantitive detection of the charge properties of few-layer graphene by surface potential measurements using electrostatic force microscopy (EFM). A minor difference in surface potential is observed to mediate a sequential assembly of metal-free phthalocyanine (H₂Pc) on monolayer, bilayer and trilayer graphenes, as demonstrated by scanning tunneling microscopy (STM). In order to understand this, we further executed density functional theory (DFT) calculations which showed higher adsorption energies for Pc on thinner graphenes. In this case, we attribute the unique growth behavior of Pc to its variable adsorption energies on few-layer graphene, and in turn the layer charge variations from the viewpoint of energy minimizations. This work is expected to provide fundamental data useful for related nanodevice fabrications.      

High performance ring oscillators from 10-nm wide silicon nanowire field-effect transistors

We explore 10-nm wide Si nanowire (SiNW) field-effect transistors (FETs) for logic applications, via the fabrication and testing of SiNW-based ring oscillators. We report on SiNW surface treatments and dielectric annealing, for producing SiNW FETs that exhibit high performance in terms of large on/off-state current ratio (∼10⁸), low drain-induced barrier lowering (∼30 mV) and low subthreshold swing (∼80 mV/decade). The performance of inverter and ring-oscillator circuits fabricated from these nanowire FETs are also explored. The inverter demonstrates the highest voltage gain (∼148) reported for a SiNW-based NOT gate, and the ring oscillator exhibits near rail-to-rail oscillation centered at 13.4 MHz. The static and dynamic characteristics of these NW devices indicate that these SiNW-based FET circuits are excellent candidates for various high-performance nanoelectronic applications.      

Production of graphene nanospheres by annealing of graphene oxide in solution

We report a simple method to produce graphene nanospheres (GNSs) by annealing graphene oxide (GO) solution at high-temperature with the assistance of sparks induced by the microwave absorption of graphite flakes dispersed in the solution. The GNSs were formed by rolling up of the annealed GO, and the diameters were mostly in the range 300–700 nm. The GNS exhibited a hollow sphere structure surrounded by graphene walls with a basal spacing of 0.34 nm. Raman spectroscopy and X-ray photoelectron spectroscopy of the GNSs confirmed that the GO was efficiently reduced during the fabrication process. The resulting GNSs may open up new opportunities both for fundamental research and applications, and this method may be extended to the synthesis of other nanomaterials and the fabrication of related nanostructures.      

Surface dislocation nucleation mediated deformation and ultrahigh strength in sub-10-nm gold nanowires

The plastic deformation and the ultrahigh strength of metals at the nanoscale have been predicted to be controlled by surface dislocation nucleation. In situ quantitative tensile tests on individual 〈111〉 single crystalline ultrathin gold nanowires have been performed and significant load drops observed in stress-strain curves suggest the occurrence of such dislocation nucleation. High-resolution transmission electron microscopy (HRTEM) imaging and molecular dynamics simulations demonstrated that plastic deformation was indeed initiated and dominated by surface dislocation nucleation, mediating ultrahigh yield and fracture strength in sub-10-nm gold nanowires.      

Sodium citrate: A universal reducing agent for reduction / decoration of graphene oxide with au nanoparticles

A facile method is proposed for the synthesis of reduced graphene oxide nanosheets (RGONS) and Au nanoparticle-reduced graphene oxide nanosheet (Au-RGONS) hybrid materials, using graphene oxide (GO) as precursor and sodium citrate as reductant and stabilizer. The resulting RGONS and Au-RGONS hybrid materials were characterized by UV-vis spectroscopy, X-ray photoelectron spectroscopy, Fourier transform infrared spectroscopy, Raman spectroscopy, atomic force microscopy, transmission electron microscopy, and X-ray diffraction. It was found that the RGONS and Au-RGONS hybrid materials formed stable colloidal dispersions through hydrogen bonds between the residual oxygen-containing functionalities on the surface of RGONS and the hydroxyl/carboxyl groups of sodium citrate. The electrochemical responses of RGONS and Au-RGONS hybrid material-modified glassy carbon electrodes (GCE) to three kinds of biomolecules were investigated, and all of them showed a remarkable increase in electrochemical performance relative to a bare GCE.      

The origin of wrinkles on transferred graphene

When two-dimensional graphene is exfoliated from three-dimensional highly oriented pyrolytic graphite (HOPG), ripples or corrugations always exist due to the intrinsic thermal fluctuations. Surface-grown graphenes also exhibit wrinkles, which are larger in dimension and are thought to be caused by the difference in thermal expansion coefficients between graphene and the underlying substrate in the cooling process after high temperature growth. For further characterization and applications, it is necessary to transfer the surface-grown graphenes onto dielectric substrates, and other wrinkles are generated during this process. Here, we focus on the wrinkles of transferred graphene and demonstrate that the surface morphology of the growth substrate is the origin of the new wrinkles which arise in the surface-to-surface transfer process; we call these morphology-induced wrinkles. Based on a careful statistical analysis of thousands of atomic force microscopy (AFM) topographic data, we have concluded that these wrinkles on transferred few-layer graphene (typically 1–3 layers) are determined by both the growth substrate morphology and the transfer process. Depending on the transfer medium and conditions, most of the wrinkles can be either erased or preserved. Our work suggests a new route for graphene engineering involving structuring the growth substrate and tailoring the transfer process.      

Monodisperse upconversion NaYF4 nanocrystals: Syntheses and bioapplications

A facile strategy using cheap and readily available precursors has been successfully developed for the synthesis of rare-earth doped hexagonal phase NaYF₄ nanocrystals with uniform shape and small particle size as well as strong photoluminescence. Due to their optical properties and good biocompatibility, these multicolor nanocrystals were successfully used as a bio-tag for cancer cell imaging. This novel synthetic method should also be capable of extension to the synthesis of other fluoride nanocrystals such as YF₃ and LaF₃.      

Selective suspension of single layer graphene mechanochemically exfoliated from carbon nanofibres

This paper presents the first report of the successful ball-milling exfoliation of graphitic filaments （GANF~ carbon nanofibres） into single layer graphene. The addition of small amounts of solvent during the milling process makes it possible to enhance the intercalation of the exfoliating agent （melamine） between the graphene layers, thus promoting exceptional exfoliation. Advantage has also been taken of the fact that the Hansen solubility parameters of graphene are different from those of carbon fibres, which allows single and few-layer graphene to be suspended in a particular solvent, thus discriminating them from poorly exfoliated carbon nanofibres.     

Fe Nanoclusters on the Ge（001） Surface Studied by Scanning Tunneling Microscopy,Density Functional Theory Calculations and X-Ray Magnetic Circular Dichroism

The growth of Fe nanoclusters on the Ge(001) surface has been studied using low-temperature scanning tunneling microscopy (STM) and density functional theory (DFT) calculations. STM results indicate that Fe nucleates on the Ge(001) surface, forming well-ordered nanoclusters of uniform size. Depending on the preparation conditions, two types of nanoclusters were observed having either four or sixteen Fe atoms within a nanocluster. The results were confirmed by DFT calculations. Annealing the nanoclusters at 420 K leads to the formation of nanorow structures, due to cluster mobility at such temperature. The Fe nanoclusters and nanorow structures formed on the Ge(001) surface show a superparamagnetic behaviour as measured by X-ray magnetic circular dichroism.      

<Emphasis Type="Italic">In situ</Emphasis> imaging of layer-by-layer sublimation of suspended graphene

An individual suspended graphene sheet was connected to a scanning tunneling microscopy probe inside a transmission electron microscope, and Joule heated to high temperatures. At high temperatures and under electron beam irradiation, the few-layer graphene sheets were removed layer-by-layer in the viewing area until a monolayer graphene was formed. The layer-by-layer peeling was initiated at vacancies in individual graphene layers. The vacancies expanded to form nanometer-sized holes, which then grew along the perimeter and propagated to both the top and bottom layers of a bilayer graphene joined by a bilayer edge. The layer-by-layer peeling was induced by atom sublimation caused by Joule heating and facilitated by atom displacement caused by high-energy electron irradiation, and may be harnessed to control the layer thickness of graphene for device applications.      

Graphene-based conducting inks for direct inkjet printing of flexible conductive patterns and their applications in electric circuits and chemical sensors

A series of inkjet printing processes have been studied using graphene-based inks. Under optimized conditions, using water-soluble single-layered graphene oxide (GO) and few-layered graphene oxide (FGO), various high image quality patterns could be printed on diverse flexible substrates, including paper, poly(ethylene terephthalate) (PET) and polyimide (PI), with a simple and low-cost inkjet printing technique. The graphene-based patterns printed on plastic substrates demonstrated a high electrical conductivity after thermal reduction, and more importantly, they retained the same conductivity over severe bending cycles. Accordingly, flexible electric circuits and a hydrogen peroxide chemical sensor were fabricated and showed excellent performances, demonstrating the applications of this simple and practical inkjet printing technique using graphene inks. The results show that graphene materials-which can be easily produced on a large scale and possess outstanding electronic properties-have great potential for the convenient fabrication of flexible and low-cost graphene-based electronic devices, by using a simple inkjet printing technique.      

Strain-induced semiconductor to metal transition in the two-dimensional honeycomb structure of MoS2

The electronic properties of two-dimensional honeycomb structures of molybdenum disulfide (MoS₂) subjected to biaxial strain have been investigated using first-principles calculations based on density functional theory. On applying compressive or tensile bi-axial strain on bi-layer and mono-layer MoS₂, the electronic properties are predicted to change from semiconducting to metallic. These changes present very interesting possibilities for engineering the electronic properties of two-dimensional structures of MoS₂.      

Optical properties of laterally aligned Si nanowires for transparent electronics applications

We have investigated the optical properties of laterally aligned Si nanowire (SiNW) arrays in order to explore their potential applicability in transparent electronics. The SiNW array exhibited good optical transparency in the visible spectral range with a transmittance of ∼90% for a NW density of ∼20–25 per 10 μm. In addition, polarization-dependent measurements revealed a variation in transmittance in the range of 80%–95% depending on the angle between the polarization of incident light and the NW axis. Using the SiNWs, we demonstrated that transparent transistors exhibit good optical transparency (greater than 80%) and showed typical p-type SiNW transistor characteristics.      

Semiconducting carbon nanotube/fullerene blended heterojunctions for photovoltaic near-infrared photon harvesting

We demonstrate that the near-infrared (NIR) absorptivity of semiconducting single-walled carbon nanotubes (s-SWCNTs) can be harnessed in blended heterojunctions with the fullerene derivative [6,6]-phenyl-C₆₁-butyric acid methyl ester (PCBM). Photogenerated charge separation is efficiently driven by the ultrahigh interfacial area of the blends and the favorable energy offsets between the two materials. NIR-sensitive photovoltaic and photodetector devices utilizing the stack (indium tin oxide/ca. 10 nm s-SWCNT:PCBM/100 nm C₆₀/10 nm 2,9-dimethyl-4,7-diphenyl-1,10-phenanthroline (BCP)/Ag) were fabricated with NIR power conversion efficiencies >1.3% and peak, zero bias external quantum efficiency of 18% at λ = 1205 nm.      

Advanced asymmetrical supercapacitors based on graphene hybrid materials

Supercapacitors operating in aqueous solutions are low cost energy storage devices with high cycling stability and fast charging and discharging capabilities, but generally suffer from low energy densities. Here, we grow Ni(OH)₂ nanoplates and RuO₂ nanoparticles on high quality graphene sheets in order to maximize the specific capacitances of these materials. We then pair up a Ni(OH)₂/graphene electrode with a RuO₂/graphene electrode to afford a high performance asymmetrical supercapacitor with high energy and power density operating in aqueous solutions at a voltage of ∼1.5 V. The asymmetrical supercapacitor exhibits significantly higher energy densities than symmetrical RuO₂-RuO₂ supercapacitors or asymmetrical supercapacitors based on either RuO₂-carbon or Ni(OH)₂-carbon electrode pairs. A high energy density of ∼48 W·h/kg at a power density of ∼0.23 kW/kg, and a high power density of ∼21 kW/kg at an energy density of ∼14 W·h/kg have been achieved with our Ni(OH)2/graphene and RuO₂/graphene asymmetrical supercapacitor. Thus, pairing up metal-oxide/graphene and metal-hydroxide/graphene hybrid materials for asymmetrical supercapacitors represents a new approach to high performance energy storage.