共查询到20条相似文献,搜索用时 15 毫秒
1.
GG Giordano RC Thomson SL Ishaug AG Mikos S Cumber CA Garcia D Lahiri-Munir 《Canadian Metallurgical Quarterly》1997,34(1):87-93
Glycation of proteins of the vessel wall is thought to play an important role in the pathogenesis of vascular complications in diabetes by affecting structure and function of these proteins. Adhesive proteins in the extracellular matrix (ECM) of endothelial cells (ECs) are essential for attachment of ECs to the subintima. In this study, we investigated the effect of glycation of ECM and purified adhesive proteins on EC adhesion and spreading. ECM was incubated with the reactive sugar glucose-6-phosphate (0-500 mmol/l) for different time periods (0-14 days) at 37 degrees C. Degree of glycation, measured in an enzyme-linked immunosorbent assay using a monoclonal antibody specific for advanced glycation end products, increased in a time- and concentration-dependent manner. Glycation of ECM with 50 mmol/l glucose-6-phosphate resulted in increased coverage by ECs as measured in a cell adhesion assay and was the result of an increase in number of adhered cells, while cell size was unaffected. Glycation of ECM with higher concentrations of glucose-6-phosphate resulted in decreased coverage by ECs caused by both a reduction in number of adhered ECs and impaired spreading. Experiments with purified glycated matrix proteins indicate that the decrease in EC adhesion and spreading on glycated ECM may result from glycation of vitronectin. Impaired EC adhesion and spreading caused by vitronectin glycation may result in impaired endothelial function and contribute to vascular disease. 相似文献
2.
This study investigated the effects of chronic muscle inflammation on indices of antioxidant status and muscle injury after eccentric exercise. Eight subjects each performed 70 maximal voluntary eccentric muscle actions on an isokinetic dynamometer, using the knee extensors of a single leg. Venous blood samples were collected into serum and EDTA tubes 5 and 3 days before exercise, immediately before exercise, and then again on days 3, 4, 5, 6, 7, 10 and 12 after the bout. Needle biopsies were taken from the vastus lateralis of six subjects, a week before exercise (baseline), and again on days 4 and 7 post-exercise. The concentrations of malondialdehyde in plasma and muscle were used as markers of lipid peroxidation. Creatine kinase activity, beta-glucuronidase activity and total antioxidant capacity were determined in serum. In muscle, aqueous and bound total antioxidant capacity, the aqueous sulphydryl concentration, and beta-glucuronidase and glucose-6-phosphate dehydrogenase activity were determined. No changes were detected in serum total antioxidant capacity, serum creatine kinase and beta-glucuronidase after the baseline biopsy. After exercise serum creatine kinase and beta-glucuronidase were elevated although other serum measures were unchanged. In muscle, aqueous and bound total antioxidant capacity, sulphydryls, glucose-6-phosphate dehydrogenase and beta-glucuronidase were all elevated. Despite evidence of inflammation in this study, muscle antioxidant status was not compromised, and malondialdehyde was unaltered in muscle and plasma. Therefore, this study provides no evidence that chronic muscle inflammation compromises antioxidant status or increases lipid peroxidation. 相似文献
3.
Biodegradable block copolymers made of poly(ethylene glycol) monomethylether (Me.PEG) and poly(D,L-lactic acid) (PLA) were investigated for their erosion properties. Wide angle X-ray diffraction (WAXD) and differential scanning calorimetry (DSC) investigations prior to erosion revealed that despite the low content of crystallizable Me.PEG of 10%, Me.PEG5-PLA45 is a partially crystalline polymer. The erosion of the polymer was investigated using cylindrical polymer matrix discs with a diameter of 8 mm and a height of 1.5 mm. WAXD and DSC spectra obtained from eroded polymer matrix discs suggest that both polymer blocks separate completely during erosion. The crystallinity of Me.PEG5-PLA45 was found to increase during erosion, which is probably due to the improved mobility of Me.PEG inside the polymer with a progressive degree of degradation. The erosion kinetics were found to be similar to that of PLA or poly(lactic-co-glycolic acid). During erosion the polymer matrix weight of dried samples remains constant for 11 weeks after which erosion sets in rapidly. From this observation one can conclude that the impact of the relatively small Me.PEG chains on Me.PEG5-PLA45 erosion is not pronounced. This is beneficial for all those applications that require the stability of the polymer matrix and in which the Me.PEG chain is intended to bring about other effects such as the modification of the surface properties of PLA polymers. 相似文献
4.
5.
6.
J Vandorpe E Schacht S Dunn A Hawley S Stolnik SS Davis MC Garnett MC Davies L Illum 《Canadian Metallurgical Quarterly》1997,18(17):1147-1152
The biodistribution of biodegradable poly(organo phosphazene) nanoparticles surface modified by adsorption of a novel poly(organo phosphazene)-poly(ethylene oxide) copolymer with a 5000 M(W) PEO chain (PF-PEO[5000]), following intravenous administration in rats and rabbits, is described. The data are compared to the biodistribution of poly(organo phosphazene) and poly(lactide-co-glycolide) nanoparticles coated with a tetrafunctional copolymer of poly(ethylene oxide)-poly(propylene oxide) ethylenediamine, commercially available as Poloxamine 908. This copolymer has a PEO chain of the same size as the poly(organo phosphazene)-PEO derivative used. The results in the rat model reveal that poly(organo phosphazene) nanoparticles with a Poloxamine 908 coating were mainly captured by the liver, although a retardation in clearance from the systemic circulation was seen. In contrast, the poly(organo phosphazene) nanoparticles coated with PF-PEO(5000) showed a prolonged blood circulating profile, with only a small amount of the nanoparticles sequestered by the liver. This indicates the importance of the nature of both the anchoring group and the particle surface on the biological performances of the system. Study of the biodistribution of the PF-PEO(5000)-coated poly(organo phosphazene) nanoparticles in the rabbit model also indicated a prolonged systemic circulation lifetime and reduced liver uptake, whereby a significant amount of the administered nanoparticles was targeted to the bone marrow. 相似文献
7.
8.
9.
10.
11.
12.
13.
Poly(2-aminoadenylic acid): interaction with poly(uridylic acid) 总被引:1,自引:0,他引:1
Poly(2-aminoadenylic acid) forms both double and triple helices with poly(uridylic acid) [poly(U)]. The 2-amino group forms a third hydrogen bond, elevating the 2 leads to 1 transition temperature by 33 degrees C. The third strand, however, has about the same stability as poly(A)-2poly(U), as measured by Tm 3 leads to 2. This selective stabilization of the two-stranded helix results in a much greater resolution of the differnt thermal transitions than that observed in analogous polynucleotide systems. In contrast to other A, U systems 3 leads to 1 and 2 leads to 3 transitions are not observed under any conditions, and the triple helix always undergoes a 3 leads to 2 transition even at very high ionic strength. A 1:1 mixture of poly(2NH2A) and poly(U) exhibits no transient formation of 1:2 complex, unlike similar mixtures of poly(A) with poly(U) and poly(T). This difference is evidently due to a more rapid displacement reaction: [poly(2NH2A) + poly(2NH2A)-2poly(U) leads to 2 poly(2NH2A)-poly(U)] With poly(2NH2A) than with poly(A). We describe a method for establishing the combining ratios of polynucleotide complexes which used a computer to calculate the angles of intersection of mixing curves as explicit and continuous functions of the wavelength. The wavelength dispersions of the angles of intersection determine optimum wavelengths for establishing stoichiometry and can also provide reliable negative evidence that presumably plausible complexes are not formed. Analogous computer procedures have been developed to determine wavelengths which are selective for the formation of both 1:1 and 1:2 complexes. Infrared spectra of the 1:1 and 1:2 complexes resemble those of other A, U homoribopolynucleotide helices in having two and three strong bands, respectively, in the region of carbonyl stretching vibrations. CD spectra of the two complexes are unusual in having negative first extrema of moderate intensity. We attribute these extrema to intrastrand interactions of strong, well-resolved transitions at 278 nm (B2u) of the 2-aminoadenine residues. The CD spectra are correlated with those of other polynucleotide helices. 相似文献
14.
15.
Encapsulation of plasmid DNA in biodegradable poly(D, L-lactic-co-glycolic acid) microspheres as a novel approach for immunogene delivery 总被引:1,自引:0,他引:1
Transferrin receptor is a key protein for the cellular uptake of transferrin iron. The highest number of transferrin receptors is on the surface of erythroblasts. The released iron is used for hemoglobinosynthesis. Regulation occurs at mRNA level depending on the intracellular iron concentration. The synthesis of ferritin and transferrin receptor are regulated in an opposite manner. Serum transferrin receptor is a truncated monomeric form of the cellular receptor. Most of the circulating receptors come from erythroid marrow precursors. Its level mirrors the total tissue receptor mass, it depends on the rate of erythropoiesis and on the iron status. Serum transferrin receptor is easily measured by Elisa methods but the lack of standardization triggers large differences in the results. Unlike ferritin, the concentration of serum transferrin receptors is unaffected in inflammatory diseases, infections, malignancies or cytolysis. In these conditions its measurement is particularly valuable for assessing an associated iron deficiency. It is a very useful tool for the diagnosis of different causes of anemia. In chronic renal failure serum transferrin receptor can predict whether patients will respond to rHu EPO therapy. 相似文献
16.
There has been extensive research on drug delivery by biodegradable polymeric devices since bioresorbable surgical sutures entered the market two decades ago. Among the different classes of biodegradable polymers, the thermoplastic aliphatic poly(esters) such as poly(lactide) (PLA), poly(glycolide) (PGA), and especially the copolymer of lactide and glycolide referred to as poly(lactide-co-glycolide) (PLGA) have generated tremendous interest because of their excellent biocompatibility, biodegradability, and mechanical strength. They are easy to formulate into various devices for carrying a variety of drug classes such as vaccines, peptides, proteins, and micromolecules. Most importantly, they have been approved by the United States Food and Drug Administration (FDA) for drug delivery. This review presents different preparation techniques of various drug-loaded PLGA devices, with special emphasis on preparing microparticles. Certain issues about other related biodegradable polyesters are discussed. 相似文献
17.
18.
Three methods were used, namely spray drying, w/o/w solvent evaporation and the aerosol solvent extraction system (ASES), for the preparation of microparticles having the same size range, to study the influence of the preparation method on polymer degradation in vitro (PBS, 37 degrees C, one month). The following five polymers of the biodegradable poly(lactic acid) (PLA) and poly(lactic-co-glycolic acid) (PLGA) group were selected: L-PLA, MW 81 200; DL-PLGA 75:25, MW 64-300; DL-PLGA 50:50 MW 52 600; DL-PLGA 50:50 MW 14 500, AND DL-PLGA 50:50, MW 3400, to prepare drug-free and drug-loaded microparticles. Tetracosactide was selected as model peptide. When microparticles were prepared by solvent evaporation, the mean diameter and, more markedly, the drug encapsulation efficiency tended to decrease when decreasing the molecular weight and increasing the proportion of glycolic acid in the polymer. In contrast, no direct influence of the polymer nature on these parameters was observed in spray dried microparticles. Polymer degradation was heterogenous in L-PLA and DL-PLGA 75:25 microparticles and was not influenced by the presence of the drug at a nominal loading of 1% (w/w), when prepared by the three methods (note that with ASES, only L-PLA could be used for microencapsulation). In batches made of DL-PLGA 50:50 MW 52 600, the degradation rate decreased slightly when increasing the drug loading. Only in the case of DL-PLGA 50:50 MW 14 500, the polymer degradation rate for spray dried microparticles was higher compared to that for microparticles prepared by the w/o/w solvent evaporation method. Generally, the degradation rates of the different microparticles followed the expected order: L-PLA相似文献
19.
Y Ogawa 《Canadian Metallurgical Quarterly》1997,8(5):391-409
In this paper, microencapsulation techniques for the preparation of drug-containing monolithic microcapsules for prolonged release using biodegradable poly(alpha-hydroxy) acids, such as polylactic acid, poly(lactide-co-glycolide) and copoly(lactic/glycolic) acid are reviewed. Phase separation, solvent evaporation, and spray drying procedures are discussed. In order to achieve controlled-release formulations of highly water-soluble drugs that are entrapped efficiently, various manufacturing techniques and procedures have been developed. Degradation of poly(alpha-hydroxy) acids is altered by the copolymer ratio and molecular weight of the polymer used to make microcapsules and the amounts of released microencapsulated drugs correlate almost linearly with polymer degradation, indicating that controlled-release formulations, which release drugs over different times, can be prepared using suitable poly(alpha-hydroxy) acids with different degradation rates. 相似文献