共查询到20条相似文献,搜索用时 31 毫秒
1.
低复杂度的多视点视频编码宏块模式决策算法 总被引:2,自引:2,他引:0
为了降低多视点视频编码(MVC)的计算复杂度,提出了一种基于全局-局部率失真代价的低复杂度宏块模式决策算法。首先根据宏块候选模式的块尺寸和率失真代价特点,将所有候选模式分为大尺寸模式(Skip/Direct、Inter16×16和Intra16×16)和小尺寸模式(Inter16×8、Inter8×16、Inter8×8、Intra8×8和Intra4×4);接着统计已编码帧中这两类宏块模式的平均率失真代价,并利用这些平均率失真代价计算当前帧宏块模式决策的全局率失真代价;最后利用得到的全局率失真代价,并结合当前宏块已估计模式的局部率失真代价和空间邻近宏块的模式信息提前终止模式决策,具体包括对大尺寸宏块模式进行提前判定以及对小尺寸候选模式进行逐级选择。实验结果表明:与MVC参考代码中的全搜索模式决策算法相比,本文算法在时域预测视点和视点域预测视点上分别节省了74%和82%的平均编码时间,同时保持了良好的编码率失真性能;与现有模式决策快速算法相比,本文算法降低了更多的编码时间,并具有更好的编码率失真性能。 相似文献
2.
《Signal Processing: Image Communication》2014,29(10):1063-1078
Multiview video coding (MVC) is the appendix H of H.264/AVC, and it requires a great amount of time to compress multiple viewpoints׳ video with complex prediction structures. To reduce the whole computational complexity of MVC, this paper proposes a fast macroblock (MB) encoding algorithm based on rate-distortion (RD) activity, and it includes the fast mode decision and the fast motion/disparity estimation. First, the RD activity type of the current MB is calculated by utilizing the Skip/Direct RD cost and the average RD costs of classified MB modes. Then, through utilizing the RD activity type and RD costs of the estimated modes, the selection of candidate modes, the early decision of Skip/Direct mode, and the reduction of Inter8×8 mode estimation are all presented in the fast mode decision. By using the RD activity type and the correlations of vectors, the selection of search center and the prediction of search range are introduced in the fast motion/disparity estimation. In addition, the proposed algorithm can be applied to temporal and inter-view views as well as anchor and non-anchor frames. An experiment with a wide range of video scenes, camera setups and quantization parameters was implemented, and the results confirmed that the proposed algorithm can reduce the encoding time significantly while maintaining a similar RD performance as the original MVC encoder. Compared to the state-of-the-art algorithms, the proposed algorithm also demonstrated better performances in the various test cases. 相似文献
3.
We propose a fast macroblock (MB) mode prediction and decision algorithm based on temporal correlation for P‐slices in the H.264/AVC video standard. There are eight block types for temporal decorrelation, including SKIP mode based on rate‐distortion (RD) optimization. This scheme gives rise to exhaustive computations (search) in the coding procedure. To overcome this problem, a thresholding method for fast inter mode decision using a MB tracking scheme to find the most correlated block and RD cost of the correlated block is suggested for early stop of the inter mode determination. We propose a two‐step inter mode candidate selection method using statistical analysis. In the first step, a mode is selected based on the mode information of the co‐located MB from the previous frame. Then, an adaptive thresholding scheme is applied using the RD cost of the most correlated MB. Secondly, additional candidate modes are considered to determine the best mode of the initial candidate modes that does not satisfy the designed thresholding rule. Comparative analysis shows that a speed‐up factor of up to 70.59% is obtained when compared with the full mode search method with a negligible bit increment and a minimal loss of image quality. 相似文献
4.
A fast intra skip detection algorithm based on the rate‐distortion (RD) cost for an inter frame (P‐slices) is proposed for H.264/AVC video encoding. In the H.264/AVC coding standard, a robust rate‐distortion optimization technique is used to select the best coding mode and reference frame for each macroblock (MB). There are three types of intra predictions according to profiles. These are 16×16 and 4×4 intra predictions for luminance and an 8×8 intra prediction for chroma. For the high profile, an 8×8 intra prediction has been added for luminance. The 4×4 prediction mode has 9 prediction directions with 4 directions for 16×16 and 8×8 luma, and 8×8 chrominance. In addition to the inter mode search procedure, an intra mode search causes a significant increase in the complexity and computational load for an inter frame. To reduce the computational load of the intra mode search at the inter frame, the RD costs of the neighborhood MBs for the current MB are used and we propose an adaptive thresholding scheme for the intra skip extraction. We verified the performance of the proposed scheme through comparative analysis of experimental results using joint model reference software. The overall encoding time was reduced up to 32% for the IPPP sequence type and 35% for the IBBPBBP sequence type. 相似文献
5.
Fengsui Wang Huanqiang Zeng Qinghong Shen Sidan Du 《Signal Processing: Image Communication》2013,28(7):736-744
Multi-view video coding (MVC) uses various prediction modes and exhaustive mode decision to achieve high coding efficiency. However, the introduced heavy computational complexity becomes the bottleneck of the practical application of MVC. For this, an efficient early Direct mode decision for MVC is proposed in this paper. Based on the observation that the Direct mode is highly possible to be the optimal mode, the proposed method first computes the rate distortion (RD) cost of the Direct mode and compares this RD cost value with an adaptive threshold for providing an early termination chance as follows. If this RD cost value is smaller than the adaptive threshold, the Direct mode will be selected as the optimal mode and the checking process of the remaining modes will be skipped; otherwise, all the modes will be checked to select the one with the minimum RD cost as the optimal mode. Note that the above-mentioned adaptive threshold is determined as the median prediction value of a set of thresholds, which are derived by using the spatial, temporal and inter-view correlations between the current macroblock (MB) and its neighboring MBs, respectively. Experimental results have demonstrated that the proposed method is able to significantly reduce the computational complexity of MVC with negligible loss of coding efficiency, compared with the exhaustive mode decision in MVC. 相似文献
6.
本文介绍一种基于MLC闪存和AHB总线的高速大容量数据控制系统的硬件实现方法,所提出的闪存控制器实现带8个8K字节缓冲器的高效率缓冲管理控制器来管理8个通道,每个通道可以连接8个闪存芯片。文中还介绍了快闪存储器存储单元的空白检查和交叉存取操作。实验结果证明该固态盘控制器的最高读速度为230.2MB/s,最高写速度为101.9MB/s.最后给出了控制器的综合结果和功耗分析,在24比特BCH纠错与一个通道的配置条件下,控制器的实现需要315K逻辑门。 相似文献
7.
实时成像算法在某8mm高分辨机载SAR中的应用 总被引:1,自引:1,他引:0
在某8mm高分辨机载合成孔径雷达(SAR)中,根据实时信号处理的要求,对多种算法的优劣进行了比较,并用所选算法(RD和运动补偿算法)对实际回波数据进行处理,验证了算法的有效性。 相似文献
8.
针对多视点视频编码(MVC)中部分大宏块模式(SKI P/DIRECT模式,帧间16×16模式)相对于其它模式的计算复杂 度低,并且在编码所确定的最优模式中占有相当高比重的特点,本文提出一种基于转移概率 的多视点视频 快速模式选择算法。首先根据多视点视频当前编码宏块对应时间和视点间宏块及周围宏块的 位置几何关系, 建立宏块模式参考模型;其次比较参考模型中模式的时间相似度和视点间相似度;最后计算 模式之间的转 移概率,确定提前结束大宏块模式选择过程的阈值。实验结果表明,本文所提出的快速算法 平均节约MVC时间80.93%,编码质量平均下降0.04dB,码率平均增加0.27%。 相似文献
9.
《Electronics letters》2008,44(25):1458-1459
Rate distortion optimisation (RDO), which is the best performing mode decision method for H.264, does not consider dependence between neighbouring blocks, because calculating rate distortion (RD) costs for all possible mode sets requires too many computations. However, in H.264 intra coding, RD performance of the current block is affected by reference pixels in neighbouring blocks. Thus, considering dependence between neighbouring blocks can enhance RD performance in mode decision. Proposed is an adaptive RDO for H.264 intra coding. To consider block dependence with only a few more computations, a mode decision criterion is proposed for I4 x 4 using the partial boundary sum of the squared differences. Experimental results show that the proposed method improves RD performance compared to RDO. 相似文献
10.
Rusu S. Tam S. Muljono H. Stinson J. Ayers D. Chang J. Varada R. Ratta M. Kottapalli S. Vora S. 《Solid-State Circuits, IEEE Journal of》2010,45(1):7-14
This paper describes a 2.3 Billion transistors, 8-core, 16-thread, 64-bit Xeon? EX processor with a 24 MB shared L3 cache implemented in a 45 nm nine-metal process. Multiple clock and voltage domains are used to reduce power consumption. Long channel devices and cache sleep mode are used to minimize leakage. Core and cache recovery improve manufacturing yields and enable multiple product flavors from the same silicon die. The disabled blocks are both clock and power gated to minimize their power consumption. Idle power is reduced by shutting off the unterminated I/O links and shedding phases in the voltage regulator to improve the power conversion efficiency. 相似文献
11.
The latest international video-coding standard H.264/AVC significantly achieves better coding performance compared to prior
video coding standards such as MPEG-2 and H.263, which have been widely used in today’s digital video applications. To provide
the interoperability between different coding standards, this paper proposes an efficient architecture for MPEG-2/H.263/H.264/AVC
to H.264/AVC intra frame transcoding, using the original information such as discrete cosine transform (DCT) coefficients
and coded mode type. Low-frequency components of DCT coefficients and a novel rate distortion cost function are used to select
a set of candidate modes for rate distortion optimization (RDO) decision. For H.263 and H.264/AVC, a mode refinement scheme
is utilized to eliminate unlikely modes before RDO mode decision, based on coded mode information. The experimental results,
conducted on JM12.2 with fast C8MB mode decision, reveal that average 58%, 59% and 60% of computation (re-encoding) time can
be saved for MPEG-2, H.263, H.264/AVC to H.264/AVC intra frame transcodings respectively, while preserving good coding performance
when compared with complex cascaded pixel domain transcoding (CCPDT); or average 88% (a speed up factor of 8) when compared
with CCPDT without considering fast C8MB. The proposed algorithm for H.264/AVC homogeneous transcoding is also compared to
the simple cascaded pixel domain transcoding (with original mode reuse). The results of this comparison indicate that the
proposed algorithm significantly outperforms the mode reuse algorithm in coding performance, with only slightly higher computation. 相似文献
12.
Okuno M. Kato K. Ohmori Y. Kawachi M. Matsunaga T. 《Lightwave Technology, Journal of》1994,12(9):1597-1606
An improved 8×8 optical matrix switch was fabricated using silica-based planar lightwave circuits (PLCs) on a silicon substrate. Three improvements were made. First, the waveguide material was changed from titanium-doped silica (SiO22-TiO2) to germanium-doped silica (SiO22-GeO2) to reduce propagation loss. Second, offset driving powers were supplied to every switch unit to realize high extinction ratios. Third, the dummy switch units were modified to suppress the crosstalk through these units. The average insertion loss of the fabricated device was 3.81 db in the TE mode and 3.82 dB in the TM mode. The average extinction ratio of the switch units was 25.3 dB in the TE mode and 22.3 dB in the TM mode. The accumulated crosstalk was estimated to be less than -14 dB in the TE mode and -11 dB in the TM mode. The average driving power of the phase shifter in the on-state was 0.54 W in the TE mode and 0.52 W in the TM mode. The switching response time was 1.3 ms. The packaged 8×8 matrix switch with additional fiber-waveguide coupling loss of 2.7 dB was successfully employed in photonic multimedia switching and photonic inter-module connector system experiments 相似文献
13.
14.
A joint model of scalable video coding (SVC) uses exhaustive mode and motion searches to select the best prediction mode and motion vector for each macroblock (MB) with high coding efficiency at the cost of computational complexity. If major characteristics of a coding MB such as the complexity of the prediction mode and the motion property can be identified and used in adjusting motion estimation (ME), one can design an algorithm that can adapt coding parameters to the video content. This way, unnecessary mode and motion searches can be avoided. In this paper, we propose a content-adaptive ME for SVC, including analyses of mode complexity and motion property to assist mode and motion searches. An experimental analysis is performed to study interlayer and spatial correlations in the coding information. Based on the correlations, the motion and mode characteristics of the current MB are identified and utilized to adjust each step of ME at the enhancement layer including mode decision, search-range selection, and prediction direction selection. Experimental results show that the proposed algorithm can significantly reduce the computational complexity of SVC while maintaining nearly the same rate distortion performance as the original encoder. 相似文献
15.
Okuno M. Kato K. Nagase R. Himeno A. Ohmori Y. Kawachi M. 《Lightwave Technology, Journal of》1999,17(5):771-781
An 8×8 optical matrix switch consisting of asymmetric Mach-Zehnder (MZ) interferometer switching units with a waveguide intersection was fabricated using silica-based planar lightwave circuits (PLC's) on a silicon substrate. This switching unit can realize a high extinction ratio and a wide operation wavelength range even if the coupling ratios of the directional couplers (DC's) consisting the switching unit, deviate greatly from the ideal value of 50%. A matrix switch with a DC-coupling ratio of 30% was fabricated to test the validity of the proposed geometry. The average insertion loss was 7.3 dB in the transverse electric (TE) mode and 7.5 dB in the transverse magnetic (TM) mode. The average extinction ratio was 31.2 dB in the TE mode and 31.3 dB in the TM mode. The wavelength range with an extinction ratio greater than 20 dB was over 100 nm 相似文献
16.
Video compression standard H.264/AVC outperforms previous standards in terms of coding efficiency but at the cost of higher computational complexity. In H.264/AVC, the variable block size full motion estimation is the most time-consuming operation. This paper presents a method to reduce the complexity of motion estimation in two stages. The first stage exploits the similarities between frames for early SKIP mode decision for a macroblock (MB) based upon a criteria formulated on the basis of the statistics of the frame difference residues. MBs that fail to qualify for the SKIP mode in the first stage spills over to the second stage where mode decision depends upon the number of zero blocks (ZB) in the MB. The study of the full search motion estimation on different sequences show that there is a strong dependence between the number of ZBs in a MB and the likelihood of a particular mode being selected. The proposed algorithm utilizes this relationship for early mode decision for a MB. The algorithm is evaluated using a wide range of test sequences from different classes. Experimental results show that the proposed algorithm gives considerable saving in encoding time and search points in the range of 36–87%. Furthermore, despite the reduction in computational complexity, the coding efficiency (picture quality and bitrate) in the proposed method is comparable to the H.264/AVC standard software Joint Model (JM12.4). 相似文献
17.
High Efficiency Video Coding (HEVC) is a new video coding standard achieving about a 50% bit rate reduction compared to the popular H.264/AVC High Profile with the same subjective reproduced video quality. Better coding efficiency is attained, however, at the cost of significantly increased encoding complexity. Therefore, fast encoding algorithms with little loss in coding efficiency is necessary for HEVC to be successfully adopted for real applications. In this paper we propose a fast encoding technique applicable to HEVC all intra encoding. The proposed fast encoding technique consists of coding unit (CU) search depth prediction, early CU splitting termination, and fast mode decision. In CU search depth prediction, the depth of encoded CU in the current coding tree unit (CTU) is limited to predicted range, which is mostly narrower than the full depth range. Early CU splitting skips mode search of its sub-CUs when rate distortion (RD) cost of current CU is below the estimated RD cost at the current CU depth. RD cost and encoded CU depth distribution of the collocated CTU of the previous frame are utilized both to predict the encoding CU depth search range and to estimate the RD cost for CU splitting termination. Fast mode decision reduces the number of candidate modes for full rate distortion optimized quantization on the basis of the low complexity costs computed in the preceding rough mode decision step. When all these three methods are applied, proposed fast HEVC intra encoding technique reduces the encoding time of the reference encoder by 57% on the average, with only 0.6% of coding efficiency loss in terms of Bjontegaard delta (BD) rate increase under the HEVC common test conditions. 相似文献
18.
19.
20.
《Signal Processing: Image Communication》2014,29(6):667-677
Multi-view video coding (MVC) has been extended from H.264/AVC to improve the coding efficiency of multi-view video. This paper proposes a fast mode decision algorithm which can make an early decision on the correct mode partition to solve the issue of the enormous computational complexity. The best modes of the reference views are utilized to determine the complexity of the macroblock (MB) in the current view, the mode candidates needed to be calculated can then be obtained according to the complexity. If the complexity is low or medium, the search range can be reduced. The threshold of the rate-distortion cost for the current MB is calculated using the co-located and neighboring MBs in previously coded view and is utilized as the criterion for early termination. The motion vector difference in the reference view is applied to dynamically adjust the search range in the current MB. Experimental results prove that the proposed algorithm achieves a time saving of 81.05% for a fast TZ search and 87.85% for full search, and still maintains quality performance and bitrate. 相似文献