A Cross-Layer Optimization Framework for Multihop Multicast in Wireless Mesh Networks

The optimal and distributed provisioning of high throughput in mesh networks is known as a fundamental but hard problem. The situation is exacerbated in a wireless setting due to the interference among local wireless transmissions. In this paper, we propose a cross-layer optimization framework for throughput maximization in wireless mesh networks, in which the data routing problem and the wireless medium contention problem are jointly optimized for multihop multicast. We show that the throughput maximization problem can be decomposed into two subproblems: a data routing subproblem at the network layer, and a power control subproblem at the physical layer with a set of Lagrangian dual variables coordinating interlayer coupling. Various effective solutions are discussed for each subproblem. We emphasize the network coding technique for multicast routing and a game theoretic method for interference management, for which efficient and distributed solutions are derived and illustrated. Finally, we show that the proposed framework can be extended to take into account physical-layer wireless multicast in mesh networks     

An Efficient Multicast Routing Protocol in Wireless Mobile Networks

Providing multicast service to mobile hosts in wireless mobile networking environments is difficult due to frequent changes of mobile host location and group membership. If a conventional multicast routing protocol is used in wireless mobile networks, several problems may be experienced since existing multicast routing protocols assume static hosts when they construct the multicast delivery tree. To overcome the problems, several multicast routing protocols for mobile hosts have been proposed. Although the protocols solve several problems inherent in multicast routing proposals for static hosts, they still have problems such as non-optimal delivery path, datagram duplication, overheads resulting from frequent reconstruction of a multicast tree, etc. In this paper, we summarize these problems of multicast routing protocols and propose an efficient multicast routing protocol based on IEFT mobile IP in wireless mobile networks. The proposed protocol introduces a multicast agent, where a mobile host receives a tunneled multicast datagram from a multicast agent located in a network close to it or directly from the multicast router in the current network. While receiving a tunneled multicast datagram from a remote multicast agent, the local multicast agent may start multicast join process, which makes the multicast delivery route optimal. The proposed protocol reduces data delivery path length and decreases the amount of duplicate copies of multicast datagrams. We examined and compared the performance of the proposed protocol and existing protocols by simulation under various environments and we got an improved performance over the existing proposals.     

Transmission Range Effects on AODV Multicast Communication

As laptop computers begin to dominate the marketplace, wireless adapters with varying bandwidth and range capabilities are being developed by hardware vendors. To provide multihop communication between these computers, ad hoc mobile networking is receiving increasing research interest. While increasing a node's transmission range allows fewer hops between a source and destination and enhances overall network connectivity, it also increases the probability of collisions and reduces the effective bandwidth seen at individual nodes. To enable formation of multihop ad hoc networks, a routing protocol is needed to provide the communication and route finding capability in these networks. The Ad hoc On-Demand Distance Vector Routing protocol (AODV) has been designed to provide both unicast and multicast communication in ad hoc mobile networks. Because AODV uses broadcast to transmit multicast data packets between nodes, the transmission range plays a key role in determining the performance of AODV. This paper studies the effects of transmission range on AODV's multicast performance by examining the results achieved at varying transmission ranges and network configurations.     

MultiServ: a service-oriented framework for multihop wireless networks

In order to enable fast deployment of new emerging services over multihop wireless networks, it is important to design an efficient service-based platform with the necessary traffic management capabilities. In this paper, we propose a new distributed service-oriented framework for wireless multihop networks, called MultiServ, in which it adopts a quantitative approach toward optimal traffic distribution. Under Multiserv framework, an efficient overlay network can be easily constructed that can greatly facilitate the deployment of new services. We use media streaming and application level multicast as examples to illustrate how the services can be supported. The performance results demonstrate that MultiServ can substantially outperform the conventional approach and achieves comparable performance obtained by a centralized scheme.     

Intelligent Internal Stealthy Attack and its Countermeasure for Multicast Routing Protocol in MANET

Multicast communication of mobile ad hoc networks is vulnerable to internal attacks due to its routing structure and high scalability of its participants. Though existing intrusion detection systems (IDSs) act smartly to defend against attack strategies, adversaries also accordingly update their attacking plans intelligently so as to intervene in successful defending schemes. In our work, we present a novel indirect internal stealthy attack on a tree‐based multicast routing protocol. Such an indirect stealthy attack intelligently makes neighbor nodes drop their routing‐layer unicast control packets instead of processing or forwarding them. The adversary targets the collision avoidance mechanism of the Medium Access Control (MAC) protocol to indirectly affect the routing layer process. Simulation results show the success of this attacking strategy over the existing “stealthy attack in wireless ad hoc networks: detection and countermeasure (SADEC)” detection system. We design a cross‐layer automata‐based stealthy attack on multicast routing protocols (SAMRP) attacker detection system to identify and isolate the proposed attacker. NS‐2 simulation and analytical results show the efficient performance, against an indirect internal stealthy attack, of SAMRP over the existing SADEC and BLM attacker detection systems.     

A simulation study of table-driven and on-demand routing protocolsfor mobile ad hoc networks

Bandwidth and power constraints are the main concerns in current wireless networks because multihop ad hoc mobile wireless networks rely on each node in the network to act as a router and packet forwarder. This dependency places bandwidth, power, and computation demands on mobile hosts which must be taken into account when choosing the best routing protocol. In previous years, protocols that build routes based on demand have been proposed. The major goal of on-demand routing protocols is to minimize control traffic overhead. We perform a simulation and performance study on some routing protocols for ad hoc networks. The distributed Bellman-Ford (1957, 1962), a traditional table-driven routing algorithm, is simulated to evaluate its performance in multihop wireless network. In addition, two on-demand routing protocols (dynamic source routing and associativity-based routing) with distinctive route selection algorithms are simulated in a common environment to quantitatively measure and contrast their performance. The final selection of an appropriate protocol will depend on a variety of factors, which are discussed in this article     

QM2RP: A QoS-Based Mobile Multicast Routing Protocol Using Multi-Objective Genetic Algorithm

With the increasing demand for real-time services in next generation wireless networks, quality-of-service (QoS) based routing offers significant challenges. Multimedia applications, such as video conferencing or real-time streaming of stock quotes, require strict QoS guarantee on bandwidth and delay parameters while communicating among multiple hosts. These applications give rise to the need for efficient multicast routing protocols, which will be able to determine multicast routes that satisfy different QoS constraints simultaneously. However, designing such protocols for optimizing multiple objectives, is computationally intractable. Precisely, discovering optimal multicast routes is an NP-hard problem when the network state information is inaccurate – a common scenario in wireless networks. Based on the multi-objective genetic algorithm (MOGA), in this paper we propose a QoS-based mobile multicast routing protocol (QM²RP) that determines near-optimal routes on demand. Our protocol attempts to optimize multiple QoS parameters, namely end-to-end delay, bandwidth requirements, and residual bandwidth utilization. Furthermore, it is fast and efficient in tackling dynamic multicast group membership information arising due to user mobility in wireless cellular networks. Simulation results demonstrate that the proposed protocol is capable of discovering a set of QoS-based, near-optimal multicast routes within a few iterations, even with imprecise network information. Among these routes one can choose the best possible one depending on the specified QoS requirements. The protocol is also scalable and yields lower multicast call-blocking rates for dynamic multicast group size in large networks.     

The effects of on-demand behavior in routing protocols for multihopwireless ad hoc networks

A number of different routing protocols proposed for use in multihop wireless ad hoc networks are based in whole or in part on what can be described as on-demand behavior. By on-demand behavior, we mean approaches based only on reaction to the offered traffic being handled by the routing protocol. In this paper, we analyze the use of on-demand behavior in such protocols, focusing on its effect on the routing protocol's forwarding latency, overhead cost, and route caching correctness, drawing examples from detailed simulation of the dynamic source routing (DSR) protocol. We study the protocol's behavior and the changes introduced by variations on some of the mechanisms that make up the protocol, examining which mechanisms have the greatest impact and exploring the tradeoffs that exist between them     

Buffer occupancy and link state opportunistic routing for wireless mesh networks

Wireless Networks - Providing a high level of Quality of Service is essential for future wireless networks. This article presents a new multihop wireless routing protocol that opportunistically...     

Denial-of-service attack resilience dynamic group key agreement for heterogeneous networks

Heterogeneous networks, which can be either integrated wired and wireless networks or fully wireless networks, are convenient as they allow user nodes to be connected whenever and wherever they desire. Group key agreement (GKA) protocols are used to allow nodes in these networks to communicate securely with each other. Dynamic GKA protocols such as Join and Leave Protocol are also important since users can join and leave the network at anytime and the group key has to be changed to provide backward and forward secrecy. Denial-of-Service (DoS) attacks on GKA protocols can disrupt GKA services for secure group communications but most GKA protocols in current literature do not consider protection against DoS attacks. Furthermore, most current GKA protocols only consider outsider attacks and do not consider insider attacks. In this paper, we present three authenticated, energy-efficient and scalable GKA protocols, namely Initial GKA, Join and Leave Protocol, that provide protection against insider and DoS attacks and key confirmation properties. We also present a detection protocol to detect malicious group insiders and continue establishing a group key after blocking these malicious insiders. Unlike current communication energy analysis that uses a single energy per bit value, our communication energy analysis separates point-to-point (P2P) and broadcast communications to provide more detailed study on communications in GKA. Both the complexity and energy analysis show that the three proposed protocols are efficient, scalable and suitable for heterogeneous networks.     

Ad hoc网络中的路由技术

Ad hoc网络是一些移动节点组成一个多跳的临时性无线自治系统，这种新型的通信网络具有动态变化的拓扑结构和分布控制的网络机制。文中针对Ad hoc网络作了简单的介绍并重点介绍了针对Ad hoc网络特性而提出的路由协议。     

Concealed Data Aggregation for Reverse Multicast Traffic in Sensor Networks: Encryption, Key Distribution, and Routing Adaptation

Routing in wireless sensor networks is different from that in commonsense mobile ad-hoc networks. It mainly needs to support reverse multicast traffic to one particular destination in a multihop manner. For such a communication pattern, end-to-end encryption is a challenging problem. To save the overall energy resources of the network, sensed data needs to be consolidated and aggregated on its way to the final destination. We present an approach that 1) conceals sensed data end-to-end by 2) still providing efficient and flexible in-network data aggregation. The aggregating intermediate nodes are not required to operate on the sensed plaintext data. We apply a particular class of encryption transformations and discuss techniques for computing the aggregation functions "average” and "movement detection.” We show that the approach is feasible for the class of "going down” routing protocols. We consider the risk of corrupted sensor nodes by proposing a key predistribution algorithm that limits an attacker's gain and show how key predistribution and a key-ID sensitive "going down” routing protocol help increase the robustness and reliability of the connected backbone.     

Hierarchical geographic multicast routing for wireless sensor networks

Wireless sensor networks comprise typically dense deployments of large networks of small wireless capable sensor devices. In such networks, multicast is a fundamental routing service for efficient data dissemination required for activities such as code updates, task assignment and targeted queries. In particular, efficient multicast for sensor networks is critical due to the limited energy availability in such networks. Multicast protocols that exploit location information available from GPS or localization algorithms are more efficient and robust than other stateful protocols as they avoid the difficulty of maintaining distributed state (multicast tree). Since localization is typically already required for sensing applications, this location information can simply be reused for optimizing multicast performance at no extra cost. Recently, two protocols were proposed to optimize two orthogonal aspects of location-based multicast protocols: GMR (Sanchez et al. GMR: Geographic multicast routing for wireless sensor networks. In Proceedings of the IEEE SECON, 2006) improves the forwarding efficiency by exploiting the wireless multicast advantage but it suffers from scalability issues when dealing with large sensor networks. On the other hand, HRPM (Das et al. Distributed hashing for scalable multicast in wireless ad hoc networks. IEEE TPDS 47(4):445–487, 2007) reduces the encoding overhead by constructing a hierarchy at virtually no maintenance cost via the use of geographic hashing but it is energy-inefficient due to inefficacies in forwarding data packets. In this paper, we present HGMR (hierarchical geographic multicast routing), a new location-based multicast protocol that seamlessly incorporates the key design concepts of GMR and HRPM and optimizes them for wireless sensor networks by providing both forwarding efficiency (energy efficiency) as well as scalability to large networks. Our simulation studies show that: (i) In an ideal environment, HGMR incurs a number of transmissions either very close to or lower than GMR, and, at the same time, an encoding overhead very close to HRPM, as the group size or the network size increases. (ii) In a realistic environment, HGMR, like HRPM, achieves a Packet Delivery Ratio (PDR) that is close to perfect and much higher than GMR. Further, HGMR has the lowest packet delivery latency among the three protocols, while incurring much fewer packet transmissions than HRPM. (iii) HGMR is equally efficient with both uniform and non-uniform group member distributions.     

Efficient Resource Allocation for Wireless Multicast

In this paper, we propose a bandwidth-efficient multicast mechanism for heterogeneous wireless networks. We reduce the bandwidth cost of an Internet protocol (IP) multicast tree by adaptively selecting the cell and the wireless technology for each mobile host to join the multicast group. Our mechanism enables more mobile hosts to cluster together and leads to the use of fewer cells to save the scarce wireless bandwidth. Besides, the paths in the multicast tree connecting to the selected cells share more common links to save the wireline bandwidth. Our mechanism supports the dynamic group membership and offers mobility of group members. Moreover, our mechanism requires no modification to the current IP multicast routing protocols. We formulate the selection of the cell and the wireless technology for each mobile host in the heterogeneous wireless networks as an optimization problem. We use integer linear programming to model the problem and show that the problem is NP-hard. To solve the problem, we propose a distributed algorithm based on Lagrangean relaxation and a network protocol based on the algorithm. The simulation results show that our mechanism can effectively save the wireless and wireline bandwidth as compared to the traditional IP multicast.     

Link state opportunistic routing for multihop wireless networks

Wireless Networks - Enhancing the quality of service is the crucial issue of future wireless networks. In this paper, we propose a new multihop wireless routing protocol inspired by opportunistic...     

A simple void node and loop‐free three‐dimensional routing protocol for multi‐hop wireless networks

Wireless networks are now very essential part for modern ubiquitous communication systems. The design of efficient routing and scheduling techniques for such networks have gained importance to ensure reliable communication. Most of the currently proposed geographic routing protocols are designed for 2D spatial distribution of user nodes, although in many practical scenarios user nodes may be deployed in 3D space also. In this paper, we propose 3D routing protocols for multihop wireless networks that may be implemented in two different ways depending on how the routing paths are computed. When the routing paths to different user nodes from the base station in the wireless network are computed by the base station, we call it centralized protocol (3DMA‐CS). A distributed routing (3DMA‐DS) protocol is implemented when respective routing path of each user node to the base station is computed by the user node. In both of these protocols, the user (base station) selects the relay node to forward packets in the direction of destination, from the set of its neighbours, which makes minimum angle with the reference line drawn from user (base station) to the base station (user), within its transmission range. The proposed protocols are free from looping problem and can solve the void node problem (VNP) of multihop wireless networks. Performance analysis of the proposed protocol is shown by calculating end‐to‐end throughput, average path length, end‐to‐end delay, and energy consumption of each routing path through extensive simulation under different network densities and transmission ranges.     

Capacity regions for wireless ad hoc networks

We define and study capacity regions for wireless ad hoc networks with an arbitrary number of nodes and topology. These regions describe the set of achievable rate combinations between all source-destination pairs in the network under various transmission strategies, such as variable-rate transmission, single-hop or multihop routing, power control, and successive interference cancellation (SIC). Multihop cellular networks and networks with energy constraints are studied as special cases. With slight modifications, the developed formulation can handle node mobility and time-varying flat-fading channels. Numerical results indicate that multihop routing, the ability for concurrent transmissions, and SIC significantly increase the capacity of ad hoc and multihop cellular networks. On the other hand, gains from power control are significant only when variable-rate transmission is not used. Also, time-varying flat-fading and node mobility actually improve the capacity. Finally, multihop routing greatly improves the performance of energy-constraint networks.     

Does the IEEE 802.11 MAC protocol work well in multihop wireless adhoc networks?

The IEEE 802.11 MAC protocol is the standard for wireless LANs; it is widely used in testbeds and simulations for wireless multihop ad hoc networks. However, this protocol was not designed for multihop networks. Although it can support some ad hoc network architecture, it is not intended to support the wireless mobile ad hoc network, in which multihop connectivity is one of the most prominent features. In this article we focus on the following question: can the IEEE 802.11 MAC protocol function well in multihop networks? By presenting several serious problems encountered in an IEEE 802.11-based multihop network and revealing the in-depth cause of these problems, we conclude that the current version of this wireless LAN protocol does not function well in multihop ad hoc networks. We thus doubt whether the WaveLAN-based system is workable as a mobile ad hoc testbed     

Efficient solutions to multicast routing in communication networks

An important problem in both wireless and wired communication networks is to be able to efficiently multicst information to a group of network sites. Multicasting reduces the transmission overhead of both wireless and wired networks and the time it takes for all the nodes in the subset to receive the information. Since transmission bandwidth is a scarce commodity especially in wireless networks, efficient and near minimum-cost multicast algorithms are particularly useful in the wireless context. In this paper, we discuss methods of establishing efficient and near minimum-cost multicast routing in communication networks. In particular, we discuss an efficient implementation of a widely used multicast routing method which can construct a multicast tree with a cost no greater than twice the cost of an optimal tree. We also present two efficient multicast tree constructions for a general version of the multicast routing problem in which a network consists of different classes of nodes, where each class can have one or more nodes of the same characteristic which is different from the characteristics of nodes from other classes. Because of their efficient running times, these multicast routing methods are particularly useful in the mobile communication environments where topology changes will imply recomputation of the multicast trees. Furthermore, the proposed efficient and near minimum-cost multicast routing methods are particularly suited to the wireless communication environments, where transmission bandwidth is more scarce than wired communication environments.Partially supported by NSF/LaSER under grant number EHR-9108765, by LEQSF grant number 94-RD-A-39, by NASA under grant number NAG 5-2842.     

Multicast routing and wavelength assignment in multihop optical networks

This paper addresses multicast routing in circuit-switched multihop optical networks employing wavelength-division multiplexing. We consider a model in which multicast communication requests are made and released dynamically over time. A multicast connection is realized by constructing a multicast tree which distributes the message from the source node to all destination nodes such that the wavelengths used on each link and the receivers and transmitters used at each node are not used by existing circuits. We show that the problem of routing and wavelength assignment in this model is, in general, NP-complete. However, we also show that for any given multicast tree, the wavelength assignment problem can be solved in linear time.